(SQR 1803) CONNECT failed.  Perhaps username/password incorrect.

Hi,
When I update some process after creating a new organization its not posted. Run status is Error.
The below message getting from View Log.
(SQR 1803) CONNECT failed. Perhaps username/password incorrect.
SQR for PeopleSoft: Program Aborting.
What would be the problem and solution.
Regards,
Santhoshkumar.M

Since you changed networks and the path to your Time Capsule from your Mac has changed, did you remember to reset Time Machine to "tell" your Mac how to "find" your Time Capsule?
If you are not sure, please perform the following check on your Mac:
Open System Preferences (gear icon on the dock)
Open Time Machine
Make sure that Time Machine is "ON"
Click Select Disk
Click your Time Capsule to highlight it
Click Use for Backup
Backups should continue in a few moments, but I am not sure how your password changes will affect this. A bit more tweaking may be needed.

Similar Messages

  • Unable to connect to the MKS: Login (username / password) incorrect

    Hello everyone, my first post.
    Several months I've been trying to solve a problem with VMWare Server Remote Console 2.0
    When I try to open the remote console of any machine I have I get the following error:
    Unable to connect to the MKS: Login (username / password) incorrect
    Not to do and not understand why. If anyone can help I would appreciate that.
    Thank you all.

    There's a quick fix here.
    Just a guess, but I think it has something to do with computers not being on a domain.  I'm logged into my local Windows 7 system using the same username/password as my domain user, and I connect to network resources using that.  To spite the fact that my computer is not on the doman, I can see in the VMWare status window that it's using DOMAIN\user instead of just the user to start the VM.  Perhaps when the VMWare services auto-start the domain hasn't been authenticated to yet, hence the account is not valid.
    Original text from that site:
    Today I stumbled upon an issue in VMWare Server 2.0 problem today on a client’s server. I could log into the web administration console of VMWare Server, and I could manage the VMs from there without a problem.
    The issue came when I tried to open the console window on one of the VMs from within the VMWare admin console. The Console window opened, but after a few moments I saw: “Unable to connect to the MKS: Login (username/password) incorrect”
    I tried creating a desktop shortcut for the VM (from the VM’s summary pane), but still ran into the same problem.
    Shortly after unsuccessfully googling the error, I discovered the solution myself. I simply restarted the following Services:
    – VMWare Authorization Service
    – VMWare Server Web Access
    (In the process it restarts another one or two services, but does not interrupt any active VMs).
    After the service restart, the VM console windows opened without any problems.

  • HT1529 Having problem with receiving & sending out e-mail. Imap &Smtp acct failed verify username & password  I don't remember my yahoo password

    We have too many passwords. Now I am not able to receive or send out e-mails. apparently the connections doctors telling me the IMAP account failed tha I had to verify username & password do not match.  I don't remember the password I used as I have changed the password 4 times in the last hour and I am confused. How do I get to the area that I can check the IMAP & the SMTP password. If I changed the Apple ID password would that be the same password. My username is my yahoo address. Now do I go to yahoo.com to change that password? Unfortunately, I have to wait till next Thursday to do a one to one. That is the earliest.
    I am really confuse and not good with computers. Please help. 

    Hi Stan,
    I am not sure when this changed, I keep mine saved in the browser because I do not like to login to every site I visit. But on new test devices lately the login for the sumo site has required that I use the user name, not the email. (For you this would be just Tanker or the username that appears inthe profile)

  • A1 returning "username/password incorrect" messages on websites

    I can't find other posts with this problem so I hope I don't show my ignorance here, but I can't believe I am the only one...
    I recently purchased an IdeaPad A1-07 running Android 2.3.4. I attempted to update the system right out of the box, but the updater reported that I was up to date, so that should be set (I would think...). I downloaded the Netflix app from the Andriod app store (the A1 did not include it preloaded), and attempted to launch it. It launched fine into the login screen, but when entering the login info, the app returned a incorrect username/password error. I confirmed the info by logging in on through my PC to the Netflix site. I un-installed then re-installed the app with the same result. I then attempted to go to the website through the A1 browser and login there. Same result. Panicking, I attempted to use the A1 browser to login to FaceBook. Same result.
    Here is the strangest part: I attempted to login to the same websites using the browser on my HTC Android Incredible 2 running Android 2.3.4, and was able to login in successfully to both sites.
    Does anyone know what is going on here and how to fix it? This is a real deal breaker for me since I purchased this tablet specifically to use  with sites like Netflix and FaceBook, and I really don't know what else to do other than to try to return it and get a refund. Please help!
    Solved!
    Go to Solution.

    Success! The GO keyboard app pre loaded by Lenovo wasn't the problem, but the input settings (Auto Capitalization, display suggestions, auto complete, auto space and key correction) were. Display suggestions probably wasn't part of the issue, but its just plain annoying, so I turned that off as well. I suspect that one of the other "auto" features was slipping in a character or space or two behind my back. I turned them all off, and no longer have an issue. I suspect that it was only one of them, but I would have had to run multiple experiments to narrow down the culprit, and I really don't want to bother. None of those things help me more than they hinder me anyway.
    Find the settings under: settings/language & ketboard settings/Go keyboard for Lenovo/input setting. Good luck!

  • EUS password authentication in sql developer failing with username/password

    We have recently changed to use Enterprise User Security (EUS) for our client authentication (password global authentication).
    This is working fine but we are encountering an issue with SQL Developer whereby we can't logon using our EUS details, it simply returns the following on the logon screen:
    Status : Failure - Test failed: ORA-01017: invalid username/password; logon denied
    Logging on via sql plus client and server software and other 3rd party tools like pl/sql developer works correctly.
    It appears to be an issue with sql developer itself.
    We are using the latest Production release of sql developer 2.1
    Does anyone have any ideas?
    This is an issue for
    Edited by: david butler on Jan 14, 2010 10:45 AM

    Further to this, I have now found a suitable resolution to this that doesn't require an external client.
    There is a jdbc setting that will allow you to use EUS password authentication.
    Add the jdbc line option (below) in the sqldeveloper.conf file (backup the sqldeveloper.conf file first).
    AddVMOption -Doracle.jdbc.thinLogonCapability=o3
    The sqldeveloper.conf file can be found wherever you have installed sqldeveloper, under <INSTALL_HOME>\sqldeveloper\bin\sqldeveloper.conf.
    After you add this option, restart SQL Developer and you should be able to use your EUS username / password to authenticate via SQL Developer.

  • Connect to Server/username & password

    I am trying to upload files to a web site. I was instructed to create a new network place (a Windows function) and I am trying to do the equivalent on the Mac. If I connect to a server, I can enter the URL, but I never get asked nor do I see how I can enter my username and password to allow access to the site. There is no FTP access to the site, so this appears to be the only method of access. Sorry for reposting this but I'm still searching for an amswer to this issue. On PC the username/password box pops up when trying to connect - in the Mac it shows the connection but no data appears within the connected server and no password options appear.

    I am not an expert, but from my limited expieriance on this subject, I can tell you that if the Web Site was developed with the use of PC Software on a PC Web Server you will need to use a PC to update.
    Example I have a web site that is hosted by Yahoo, and I am able to use a PC to do any work. However the use of a Mac is impossible. Yahoo uses there own software that is a combination of Microsoft's Frontpage and a couple of other programs that have been used from several years ago.
    The use of .Mac will enable you to use a Mac to do a Web site and be the Administrator.
    Not all web hosting services will allow the use of Mac Software. While others will enable you to use a cross section of Dreamweaver, FrontPage, Photoshop, InDesign and other softwares such a Studio Pro and others.
    So you will need to find out from your Web Hosting Service, to find out if you can use other than a PC to work on the site.
    Don

  • No connection with server, connection failed, asks wifi password

    our i-pas has always worked great, suddenly we couldn't use internet anymore.  Connection failed and ask wifi password.
    I installed the new version of i-tune and re-installed our i-pad.  Still no connection.  What to do?

    Hi,
    Please make sure,
    1. Correct user ID and password entered
    2. There is no firewall/ antivirus turned on
    Thanks & Regards,
    Nagarajan

  • Username/password incorrect on iPad email, but still works in Safari

    Email was working last night, but this morning could not download new email.  Says that username or password is incorrect.  I didn't change anything.  I've tried deleting the account and recreating it, but the results are the same.  I am able to log on using Safari and from the internet on my other computer.  I have another gmail account in the email settings, and that one is currently working.  Any suggestions?

    If you are running v10.6.5 as your profile indicates, update your system software.
    Click the Apple  menu (top left in your screen) then click:  Software Update ...
    Reset Safari from the menu bar. Select the top 7 buttons, click Reset.
    And relaunch Keychain Access. From the menu bar click Keychain Access / Keychain First Aid.
    If your software is up to date and first aid doesn't help, try deleting the Safari Forms Autofill keychain.

  • IPhone 6 won't connect to home WiFi - Password Incorrect!

    So, I got my brand new iPhone 6 yesterday.. Everything seems to work fine, except for internet connection..
    Every time I attempt to connect, it rejects me, and tells me that the password is incorrect.
    I also, can't really reach the the network by walking only 10 meters away.. I really have to stand right next to the router to get a chance.
    I've tried reseting my phone completely, and it still doesn't work.
    I can easily connect at school, that why I really can't decide if it's a hardware issue, or if it's my home network.
    I just don't get it... Because we're a lot of users at home, we got tons of devices connected to the specific network. And its working impeccable.
    So my question is.... Does this have something to do with iOS 8 and it's wellknown bugs, or do I have to get my iPhone replaced?

    I just tried this and it worked, hopefully it works for you too, I have spent the last 3 hours trying to figure this out and nothing worked, I tried rebooting both my phone and the router, turning the airplane mode, etc etc I even took the password requirement off my router and still it would say "unable to join network"
    All along it was my router and not my phone.
    The routers have a list of allowed devices, called MAC filtering addresses, I had to manually add my phone's address and that fixed the "incorrect password issue"
    I went to General > About > Wi-Fi address (copy that long number/letters thing) then log into your router and access the MAC filtering allowed devices list and enter that address in there and save it, that indicates to your router that your phone is allowed to access the network.
    As soon as my husband added that address I tried entering the network password on my phone and finally it connected
    Good luck!

  • Scanning to email - Error message - username, password incorrect

    I have just got a new OfficeJet x576dw. When I try to scan to any of the email address I have sent up an Error message tell me that "username or passowrd incorrect. Make sure both user account and passowrd are vaild" 
    What is this? Why do i go to make sure these are correct?

    Hello MrCharlesAndrew,
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP OfficeJet x576dw is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime:
    HP Support Center.
    I hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • TS3899 Saying username/password incorrect for me to receive mail

    Cannot receive emails ,keeps saying username or password invalid.checked with provider and okay.switched off and on again,deleted account and restarted it still nothing.Help

    So what happens when you go into the mail settings to input the correct password?

  • TS1398 can not send or recieve emails tried everything it keeps saying username password incorrect / timed out

    since update could not send email did everything it said on support, deleting account re do now everything gone cannot recieve either any ideas?

    @ Alibaba2k2   Thank you for trying to help me.  I have the solution to this problem should anyone need to know what to do if you can't get your email hotmail on your I phone.   If you change your password on your laptop, and try to enter the new one in your I phone 5s, Apple has installed a security measure to protect your phone and account.  Unfortunately, they are not forthcoming about giving the solution to this problem that has been going on since 2010, or 2012.  If anyone needs the solution, please let me know. 

  • ORA-01017: invalid username/password;  for  Oralce 12c OEM  installation

    Hi Experts,
    Following error Oralce 12c OEM installation ,i have no clue sys user passowrd is correct in response/new_install.rsp file
    [oracle@sdp12 OEM_Packages]$ ./runInstaller -silent -responseFile /oracle/oracle8/OEM_Packages/response/new_install.rsp
    Starting Oracle Universal Installer...
    Checking Temp space: must be greater than 400 MB. Actual 1222 MB Passed
    Checking swap space: must be greater than 150 MB. Actual 4000 MB Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2013-02-24_06-22-19PM. Please wait ...[oracle8@sdp38 OEM_Packages]$
    ERROR: ERROR:Exception occurred while connecting to database. Check the connection details of the database you specified and retry.
    ORA-01017: invalid username/password; logon denied
    Unable to connect to the database and validate whether it is a supported database due to one of the following reasons:
    (1) Incorrect credentials
    (2) Listener may be down
    (3) Database may be down
    Check the credentials ,the status of the listener and the database and retry.
    i am able to connect using same username password
    [oracle8@sdp38 response]$ sqlplus sys/sys512@TET1
    SQL*Plus: Release 11.2.0.1.0 Production on Sun Feb 24 18:29:15 2013
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL>
    From response/new_install.rsp file
    DATABASE_HOSTNAME=sdp12
    LISTENER_PORT=1521
    SERVICENAME_OR_SID=TET1
    SYS_PASSWORD=sys512
    SYSMAN_PASSWORD=sysman512
    SYSMAN_CONFIRM_PASSWORD=sysman512
    i have no clue here, any help greatly appropriated
    thanks

    few things you can check :
    a) Is there a password file ? Is the password correct in it ?
    b) SYSDBA remote login is disabled. remote_login_passwordfile is not set to EXCLUSIVE in the spfile or init.ora.
    Set: remote_login_passwordfile= EXCLUSIVE
    Create a password file:
    Unix: $
    orapwd file=$ORACLE_HOME/dbs/orapw$ORACLE_SID password=sys entries=5
    Windows:
    C:\> orapwd file=%ORACLE_HOME%\database\pwd%ORACLE_SID% password= sys entries=5
    To synchronize the password for sys for normal connections and connections as sysdba connect as a sysdba user and reset the sys password:
    $ sqlplus "/ as sysdba" SQL> ALTER USER SYS IDENTIFIED BY change_on_install;

  • ORA-01017: invalid username/password when using TNS Alias

    Friends,
    I am experiencing this strange issue in 11G R2. When I use tnsalias and connect using sqlplus username/password@TNS it shows ORA-01017: invalid username/password . But the same works with ORACLE_SID. See below.
    -bash-3.00$ uname -a
    SunOS ibs-ash-sr147 5.10 Generic_144489-06 i86pc i386 i86pc
    -bash-3.00$ env | grep ORACLE
    ORACLE_SID=DB1
    ORACLE_BASE=/project/oracle/orabase
    ORACLE_HOME=/project/oracle/orabase/product/11.2.0/dbhome_1
    -bash-3.00$ tnsping DB
    TNS Ping Utility for Solaris: Version 11.2.0.1.0 - Production on 17-JUN-2011 12:23:12
    Copyright (c) 1997, 2009, Oracle.  All rights reserved.
    Used parameter files:
    /project/oracle/orabase/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = crs-scan)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DB)))
    OK (0 msec)
    -bash-3.00$ sqlplus IRES_USER@DB
    SQL*Plus: Release 11.2.0.1.0 Production on Fri Jun 17 12:30:22 2011
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    Enter password:
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
    Data Mining and Real Application Testing options
    SQL> show parameter sec_case_sensitive_logon
    NAME                                 TYPE        VALUE
    sec_case_sensitive_logon             boolean     TRUE
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
    Data Mining and Real Application Testing options
    -bash-3.00$ sqlplus IRES_USER/U9$bvs#ir@DB
    SQL*Plus: Release 11.2.0.1.0 Production on Fri Jun 17 12:34:30 2011
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    ERROR:
    ORA-01017: invalid username/password; logon denied
    Enter user-name: ^CMy understanding is that both connections use a TNS alias, but second is not working. Any help is appreciated.
    Thanks in Advance,
    SSN
    Edited by: SSNair on Jun 17, 2011 5:43 AM

    SSNair wrote:
    Friends,
    I am experiencing this strange issue in 11G R2. When I use tnsalias and connect using sqlplus username/password@TNS it shows ORA-01017: invalid username/password . But the same works with ORACLE_SID. See below.
    -bash-3.00$ uname -a
    SunOS ibs-ash-sr147 5.10 Generic_144489-06 i86pc i386 i86pc
    -bash-3.00$ env | grep ORACLE
    ORACLE_SID=DB1
    ORACLE_BASE=/project/oracle/orabase
    ORACLE_HOME=/project/oracle/orabase/product/11.2.0/dbhome_1
    -bash-3.00$ tnsping DB
    TNS Ping Utility for Solaris: Version 11.2.0.1.0 - Production on 17-JUN-2011 12:23:12
    Copyright (c) 1997, 2009, Oracle.  All rights reserved.
    Used parameter files:
    /project/oracle/orabase/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = crs-scan)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DB)))
    OK (0 msec)
    -bash-3.00$ sqlplus IRES_USER@DB
    SQL*Plus: Release 11.2.0.1.0 Production on Fri Jun 17 12:30:22 2011
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    Enter password:
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
    Data Mining and Real Application Testing options
    SQL> show parameter sec_case_sensitive_logon
    NAME                                 TYPE        VALUE
    sec_case_sensitive_logon             boolean     TRUE
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
    Data Mining and Real Application Testing options
    -bash-3.00$ sqlplus IRES_USER/U9$bvs#ir@DB
    SQL*Plus: Release 11.2.0.1.0 Production on Fri Jun 17 12:34:30 2011
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    ERROR:
    ORA-01017: invalid username/password; logon denied
    Enter user-name: ^CMy understanding is that both connections use a TNS alias, but second is not working. Any help is appreciated.
    Thanks in Advance,
    SSN
    Edited by: SSNair on Jun 17, 2011 5:43 AMHere's your problem:
    -bash-3.00$ sqlplus IRES_USER/U9$bvs#ir@DBBecaue of the dollar-sign, The shell is trying to expand the environment variable $bvs#ir@DB
    Of course you have no environment variable by that name so what gets passed to sqlplus is not "IRES_USER/U9$bvs#ir@DB", but rather "IRES_USER/U9"
    In your first test, you didn't pass the password on the command line, so the shell didn't get a chance to intercept it.
    You can have a similar issue if you have a '@' in your password
    oracle> sqlplus scott/P@ssword@orclTns will catch that first "@" as the delimiter to the tns string, and come up with something that cant' be resolved.
    Edited by: EdStevensTN on Jun 17, 2011 8:59 AM

  • Entourage error "The server for my email acount returned the error "Login Failed". Your username/password or security settings may be incorrect. Would you like to try re-entering your password?"

    I have 1 user on a Mac who just started having a pop up message when opening entourage "The server for my email acount returned the error "Login Failed".
    Your username/password or security settings may be incorrect. Would
    you like to try re-entering your password?" I know the settings are right because the users mail works on iPhone,iPad,an windows machine. I have deleted entourage plist and also tried a new user same message appears in new user.

    See thread here:
    https://discussions.apple.com/message/23175721#23175721
    It worked for me.

Maybe you are looking for