SQR issue - (SQR 5721) Error with ioctl()

If anyone can help on this I would be very grateful. Here is the issue: When running SQR's on the command line I am receiving the followingerror after I type 'sysadm'. Normally it should allow me to typethe password (without displaying it). I can run the sqr on our Unixbox if I include the username/password in the command line. According tothe SQR documentation this error (5721) it says "This is anerror that should never occur during normal operations. Record thesteps leading up to the error and contact your systemadministrator" -- sqr first.sqr Enter Username: sysadm Enter Password: (SQR 5721) Error with 'ioctl()'. (12): Not enough space -- After I type "sysadm" and hit Enter I receive : Enter Password: (SQR 5721) Error with 'ioctl()'. (12): Not enough space -- We believe the problem is related to the Unix box in that the sqris trying to write the Username to a temporary location either inMemory or a Physical Location on the Box.

Hi Mash,
I was trying to generate one report from SQR studio, got the following message.
"failed to produce the HTML output file .additionally ,no,Spf,/LOG, ot .ERR files were generated.most likely causes include:SQR configuration,and the BRB datasource definition used for this report"
I am not able to get any clue for the above error.please throw some light on the above
thanks in advance
kishore

Similar Messages

Several Issue: Stale Data Error with 2 pages opened at same time

Hello Gurus,
I developed an OAF page to create and also update records. My page, depending from the operation, can show the data on fields, for update, or blank, on case to create records. This page contains one LOV field, input fields and textarea field to get the data.
When i try record or update using one page per time, the LOV field works fine and records are uptodated with success.
But if i use 2 pages or more in these situations:
- one page is opened in update operation;
- another page to create a new record.
Issue: When i click to change the LOV field value on create page, or update page, the Lov pop-up is opened with success, but when i click in another value, i get this error below. Any action also can cause this error, like click on Back Button (with name 'Voltar', created by me). Please see the error below:
Error: Stale Data*
The requested page contains stale data.*
This error could have been caused through the use of the browser's navigation*
buttons (the browser Back button, for example).*
Cause:*
The view object XXXAM.XXXVO1 contained no record.*
The displayed records may have been deleted, or the current record for the view*
object may not have been properly initialized.*
This error hapens when i open 2 pages on update operation mode also.
This error dont hapens only when i open 2 pages on create operation mode.
Ps:
Note: I have an ApplicationModule (AM) for LOV and another AM for this page, but i used this other AM to another page too and VOs. Have any problem on this???
To help to understand, i printed my page, u can see the screenshots on links below:
http://imageshack.us/a/img850/9186/printforum1.png
http://imageshack.us/a/img197/2185/printforum2.png
I´ll print some code blocks and if u need know more code blocks, please tell me:
My PageCO Controller, at processFormRequest, code to define update or create Operation:
+if (row.getNewRowState() == Row.STATUS_NEW) {+
operationType = createOperation;
+} else {+
operationType = updateOperation;
+}+
My Controller, at processRequest, update or create operation:
+if (!pageContext.isFormSubmission()) {+
OAApplicationModule am = pageContext.getApplicationModule(webBean);
String reqHeaderId =
pageContext.getParameter("requisitionHeaderId");
+Serializable[] params = {reqHeaderId};+
IcxReceivingAlreadyExistsVOImpl receivingExistsVO = (IcxReceivingAlreadyExistsVOImpl)am.findViewObject("IcxReceivingAlreadyExistsVO1");
receivingExistsVO.initQuery(reqHeaderId);
+if (receivingExistsVO.hasNext()) {+
TransactionUnitHelper.startTransactionUnit(pageContext, UPDATE_RECEIVER_TRX);
am.invokeMethod("initPersonQuery", params);
+} else {+
TransactionUnitHelper.startTransactionUnit(pageContext, CREATE_RECEIVER_TRX);
am.invokeMethod("createReceivingPerson", params);
+}+
+}+
My AMImpl.java :
+public void createReceivingPerson(String reqHeaderId) {+
OAViewObject vo = getIcxReceivingPersonVO1();
+if (!vo.isPreparedForExecution()) {+
vo.executeQuery();
+}+
Row row = vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
row.setAttribute("RequisitionHeaderId", reqHeaderId);
+}+
+public void initPersonQuery(String reqHeaderId) {+
IcxReceivingPersonVOImpl vo = getIcxReceivingPersonVO1();
+if (vo == null) {+
+MessageToken[] errTokens = { new MessageToken("OBJECT_NAME", "IcxReceivingPersonVO1")};+
throw new OAException("AK", "FWK_TBX_OBJECT_NOT_FOUND", errTokens);
+}+
vo.initQuery(reqHeaderId);
+}+
+public void apply() {+
getTransaction().commit();
+}+
+public void rollback(){+
Transaction txn = getTransaction();
+if (txn.isDirty()) {+
txn.rollback();
+}+
+}+
In the hope of a solution, waiting for ur precious help, Gurus
My true thanks since now,
Best Regards,
Alberto Bogéa

Hi,
Can you please tell, if you are using the same EO/VO combination for both the operation - Insert and Update on both screens.
Quite possible, that when you open two screen in say Update Mode and you open the two List Of Values, then as soon as you have selected the value in one of the LOV, the Other LOV will throw you stale data as the same VO/EO is being used.
Try using two different EOs/VOs combination and see if that helps.
Regards,
Saurabh Agrawal

ORACLE 8i INSTALLER WITH P4 ISSUES AND TNS ERROR WITH 9i

I want to thank those that have been of help on this subject matter. Finally after 2 agonised weeks, I was able to get around the Oracle 8i installer not able to run on my Pentium 4 laptop. Also having problem logging in to 9i SQL*PLUS. I just want to reinstate that by renaming the file symcjit.dll to symcjit.old does not work automatically. I tried it on Oracle 8.1.6 and 8.1.7(Enterprise/Standard/Personal) many times. Although it did work with Oracle Personal 8.1.6 at one point in time after the system has already 9i installed. After uninstalling the 9i, the installer stopped working again. I WAS NOT SURE IF ORACLE HAS THIS ORACLE 9i DATABASE ENTERPRISE/STANDARD/PERSONAL FOR WINDOWS NT/2000/XP ON CD. THE ONE I BOUGHT IS THE 9IAS AND 9IDS (2 Boxes) WHICH WILL NOT CONFIGURE YOUR DATABASE FOR YOU.
When I was about to give up after doing some more research, then I saw the download for "Oracle9i Database Enterprise/Standard/Personal Edition for Windows NT/2000/XP". I followed the exact direction, but did everything in my directory and not DOS since I don't know the command for unzipping files in DOS. By unzipping all the files in their respective folders Disk1/Disk2/Disk3, and going to install/win32/setup.exe, the rest of the installation went smoothly, when the system prompt for the location of the next disk, just type 2 and then 3. The installation configured everything like tnsnmaes, instances, databases e.t.c. All I did was suppied the password for Sys and System.
By downloading this particular file, I was able to bypass any configuration which is a pain, but not for you DBA guys out there. THE DOCUMENTATION FOR THESE CD,s DID NOT GIVE EXACT STEP BY STEP FOR CONFIGURATION, ONLY INSTALLATION. I AM A DEVELOPER AND NOT A DBA. Orale 8i is more easy to confugure than 9i. I WAS ALSO ABLE TO INSTALL 6i, 9ids AND SQL NAVIGATOR ON TOP OF THIS 9i, AND ALL CONNECTIONS WORKED PERFECTLY BY USING SYS OR SYSTEM AND THE PASSWORD I SUPPLIED DURING INSTALLATION.
AGAIN THANKS TO EVERYBODY USING THIS FORUM. YOU GUYS ARE GREAT AND DOING A GOOD JOB HELPING OUT OTHERS. LET'S KEEP IT ROLLING!!!
Timi Jones

O yea, I used WinZip 8.1 and it created correct directory stucture - that's the whole problem

Getting Communication error with the external tax system(VERTEX_MS0018)

Hi All,
I am a new SAP HCM self learner. I am practicing it on company's sandbox system. When I am trying to create a company and saving the address, it is returning Communication error with the external tax system(VERTEX_MS0018). I have already tried to solve is issue by going thru previous related to same issue like
Communication error with the external tax system (VERTEX_MS0018) ...Urgent
but coudn't solve the issue.
Please help. Is this issue coming as I am using a training environment? any alternate approach?

Hi Ravi,
To disable the connection to Vertex:
Goto tcode SPRO > Cross Application Components > Transaction Tax Engine >
Technical Settings> Define External Tax System
Here an RFC would be defined. Remove it and try again.
Also in SPRO > Cross Application Components > Tax Determination based on Jurisdiction Codes > External Tax Jurisdiction > Activate External Tax Jurisdiction.
Remove the entry 'V' here.
Regards,
Srikishan

HTTP error: 401 Unauthorized. ICS:3001: The referenced certificate having been issued by 'CN=DEC' with serial :0x20140423094001 is.

Dear Experts,
Transaction code : ME23N
while create a document by through a GOS (Generic Object Service), Iam facing a problem and it through a error message:
HTTP error: 401 Unauthorized. ICS:3001: The referenced certificate having been issued by 'CN=DEC' with serial :0x20140423094001 is.
Please giude me on this issue.
Thank & Regards,
Mahendra.

Hi Janos,
by through a GOS under a GOS by using a Store Business document to create a document in Transaction. Please find the below attached screenshots has i following to create a document in a Transaction. So , while creation a document in T-code am facing a error like:
HTTP error: 401 Unauthorized. ICS:3001: The referenced certificate having been issued by 'CN=DEC' with serial :0x20140423094001 is.

The recent software update on my HTC One has caused errors with Exchange ActiveSync issues. Calendar, mail and tasks sync fine but contacts won't sync. How do you correct this?

The recent software update on my HTC One has caused errors with Exchange ActiveSync issues. Calendar, mail and tasks sync fine but contacts won't sync. How do you correct this?

I had the same problem. Here is what worked for me. Open the mail app and delete your exchange account (Settings > Delete Account). Then re-add your Exchange account. After this my Exchange contacts showed up again.

I am trying to download my photos from my iphone to my mac-iphoto. It keeps trying but about halfway through it says there is an error with a photo therefore it wont download any of my pictures or videos. It wont tell me which picture is the issue.

I took a lot of pictures and video on my recent trip to Ireland. Now I am trying to download the photos and videos from my iphone to my mac - iphoto. I have tried 3 times and each time (at a different point) I get a message telling me that there was an error with one of my photos and it wont load the pictures. Help!!

Try using Image Capture to download to a folder on the Desktop. If there's a damaged file on the iPhone that's preventing the download you can isolate it with Image Capture and then delete it from the iPhone.

Makechroot trouble - GPGME error: Inappropriate ioctl for device

Hi everybody!
I'm currently trying out several DEs with Arch and would like to build Trinity, R14, too. I followed the wiki (which more or less points to this readme).
Things are a bit tricky there, but I ended up with having the tar.gz archives built and moved to the right location as well as placing all the other stuff into the dirs made for it.
Step 4 set up a new chroot for me and everything was well except for a warning that there was no local.db. Since the scripts don't seem to build 'hal-info', 'hal' and 'libutempter', I build packages for them by hand and moved those into $chroot/root/repo. Then I used repo-add local.db.tar.gz $pkgname for each package.
Finally I updated the chroot using mkarchroot -u $chroot/root". It worked well and now I do have a file 'local.db'.
But if I want to build the first package ('tqt3') using the 'bt.sh' script, it works up to the moment where it issues 'sudo makechrootpkg -r /home/myusername/chroot -u'. Pacman starts downloading the dependencies before building, but once it's done with "checking package integrity", I just get several lines of
error: GPGME error: Inappropriate ioctl for device
and than a bunch of lines talling me that $pkgname is "missing required signature".
I'm rather new to Arch and despite having searched the wiki, the forums and google for a while, I'm not really going anywhere. I understand that it's pacman which is unable to cope with the signature thing in the chroot. But what to do about this?

Thanks for your answer, cmb!
My problem was solved in an unexpected way, though: Just a few days after I had given up on getting building the Trinity DE myself, someone set up a custom repo for it that was added to the wiki. This was of course by far the easiest solution. But it was also good to mess a little with the build system myself.

Odd Error with decode function in Order By Clause

I am trying to compile a procedure and can't get around an error with a dynamic order by that doesn't make much sense to me. I can repoduce the error with a plain select statment in sql plus so I can rule out a declaration error. Here is an example with 2 numeric columns and a date column.
select task_id, display_date, remark_id from task_list
where task_id > 1000
order by decode('Task_ID', 'Task_ID',Task_ID, 'Display_Date', Display_Date, 'Remark_ID',Remark_ID)
returns the error:
select task_id, display_date, remark_id from task_list
ERROR at line 1:
ORA-00932: inconsistent datatypes: expected NUMBER got DATE
I'm not sure why this error is occuring, because it doesn't even hit the Display_Date field in the Decode statment. If I take the Display_date out of the statement, it runs properly. If I change Display_Date to To_Char(Display_Date) it also runs fine, but the sorting is incorrect. Also I'm running 9.2, and do not want to use dynamic sql to build my query. Any Ideas out there as to the cause of this error?

I did find a workaround to this issue by breaking the decode statment into three separate statement, but I still think that the way it is written above should work, and may be a bug, or an error that I don't understand fully.
The Order by was rewritten like this:
order by decode(pSort, 'Task_ID',Task_ID), decode(pSort, 'Display_Date', Display_Date),
decode(pSort, 'Remark_ID',Remark_ID);
Thanks

Graphic problems/errors with Mainstage 3 and MBP (15'' 2011)

Hi,
I bought Mainstage 3 for my MBP (15'' 2011).
When i click con "perform" i get graphic errors.
I have the same issue with the old Mainstage version since Mountain Lion.
Also a fresh installation didn't help.
I think i'm not the only one with this issue!
I don't know how to report a bug?
Perhaps someone can help me.
(and I'm probably not the only one (see feedback in Apple Store) If you also have this problem, please add a comment with your configuration (Hardware, Software))
/forgotten ebi
So, here an example how it looks like when i click on "perform":

Same configuration,same problem. BUT I found a workaround.
Mainstage has this error with the AMD video card and/or a second monitor connected.
With a little app (http://gfx.io) it's possible to really force the MBPro to use the Intel Graphics card.
This will work only with the internal screen, not with a second screen connected.
And sometimes you need to restart, to really make the Intel video card free.
This works fine...In the meantime of a fix.

My ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working. i have a a windows PC please help thanks

my ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working.
ive tried everything and ive been to the store which was when i was given a new ipad mini. i have a a windows PC please help thanks

Are you attempting to sync music from your iTunes Music Library on your PC?
What options do you have set on the Music Tab for your iPad in iTunes?
What happens when you sync?
Any error messages?

PeopleSoft XML Publisher report error with java.io.FileNotFoundException

Hi,
I have created two reports using XML Publisher in Peoplesoft Financials. The two reports are not related and they were submitted for processing separately. The first report completes without any issues. The second report results in error with the following message:
09.11.17 ..(CIS_POTRPT.XML_FILE.Step03) (PeopleCode)
[012309_091118154][oracle.apps.xdo.template.FOProcessor][EXCEPTION] IOException is occurred in FOProcessor.setData(String) with 'files/cis_potrpt.xml'.
[012309_091118500][oracle.apps.xdo.template.FOProcessor][EXCEPTION] java.io.FileNotFoundException: files/cis_potrpt.xml (A file or directory in the path name does not exist.)
 at java.io.FileInputStream.open(Native Method)
 at java.io.FileInputStream.<init>(FileInputStream.java(Compiled Code))
 at java.io.FileInputStream.<init>(FileInputStream.java:89)
 at oracle.apps.xdo.template.FOProcessor.getInputStream(FOProcessor.java:1316)
 at oracle.apps.xdo.template.FOProcessor.getXMLInput(FOProcessor.java:1100)
 at oracle.apps.xdo.template.FOProcessor.setData(FOProcessor.java:372)
 at com.peoplesoft.pt.xmlpublisher.PTFOProcessor.generateOutput(PTFOProcessor.java:53)
2009-01-23-09.11.18.000418 AePcdExecutePeopleCode [174] Exception logged: RC=100.
Error generating report output: (235,2309) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport PCPC:51552 Statement:1153
Called from:CIS_POTRPT.XML_FILE.GBL.default.1900-01-01.Step03.OnExecute Statement:8
2009-01-23-09.11.18.000617 DoStepActions [1797] Exception logged: RC=100.
Process 598607 ABENDED at Step CIS_POTRPT.XML_FILE.Step03 (PeopleCode) -- RC = 24 (108,524)
In the process monitor detail > view log/trace page, the xml file is accessible so the file was generated to a valid directory.
The weird thing is I was able to run this report without any issues few weeks ago although another user also ran into same error. The PeopleCode step that has been identified is essentially same in the two reports. I checked the app server and the directory does exist as well as the xml files for the two reports. The problem does not occur in test environment, just in production. Any help would be appreciated.

We encounter the same problem. Did you get the answer for this issue? Thanks in advance.

Error With Export/Print from Crystal Report Viewer

Hello there,
I've searched through the web and SAP discussion boards with not much luck with this issue.
After working through this for some days now I've decided to look here for help.
Environment:
I have created a web Crystal Report viewer application(Developed with SBOP BI Platform 4.0 SP06 .NET SDK Runtime) that communicates with a managed Cyrstal Server 2011 SP4 (Product 14.0)
I am able to connect and authenticate with the server, retrieve a token for communication and display reports in the Crystal report Viewer successfully.
Problem:
When I attempt to export, I receive the prompt to select format and pages.
When I click export after selections most times I receive an error with the text
Unable to cast COM object of type 'System.__ComObject' to interface type 'CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{74EEBC42-6C5D-11D3-9172-00902741EE7C}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
Other times the page simply refreshes on export.
When I click to print, no print dialog is displayed the page always refreshes and no error is displayed.
No Print or Export document is ever created.
As many print/export issues seems to be related, I'm guessing this two issues are as well.
Notes:
I am utilizing the ReportClientDocument model
I am storing this in session to use as the crystal report viewer report source on postbacks
I am assigning a subset of export formats to the crystal report viewer
I am setting particular parameters as well on the report source
At this point I would appreciate every assistance I may receive on this issue
Thanks in advance,
Below is the pertinent code
Code:
<aspx>
 <CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
 AutoDataBind="true" EnableDatabaseLogonPrompt="False"
 BestFitPage="False" ReuseParameterValuesOnRefresh="True"
CssClass="reportFrame" Height="1000px" Width="1100px" EnableDrillDown="False"
ToolPanelView="None" PrintMode="Pdf"/>
<Codebehind>
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using CrystalDecisions.Enterprise;
using CrystalDecisions.ReportAppServer.ClientDoc;
using CrystalDecisions.ReportAppServer.CommonObjectModel;
using CrystalDecisions.ReportAppServer.Controllers;
using CrystalDecisions.ReportAppServer.DataDefModel;
using CrystalDecisions.ReportAppServer.ReportDefModel;
using CrystalDecisions.Shared;
namespace ClassicInternalReportPage
 public partial class Reports : System.Web.UI.Page
 protected override void OnInit(EventArgs e)
 base.OnInit(e);
 if (!String.IsNullOrEmpty(Convert.ToString(Session["LogonToken"])) && !IsPostBack)
 SessionMgr sessionMgr = new SessionMgr();
 EnterpriseSession enterpriseSession = sessionMgr.LogonWithToken(Session["LogonToken"].ToString());
 EnterpriseService reportService = enterpriseSession.GetService("RASReportFactory");
 InfoStore infoStore = new InfoStore(enterpriseSession.GetService("InfoStore"));
 if (reportService != null)
 string queryString = String.Format("Select SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS "
 + "Where SI_PROGID='CrystalEnterprise.Report' "
 + "And SI_ID = {0} "
 + "And SI_INSTANCE = 0", Request.QueryString["rId"]);
 InfoObjects infoObjects = infoStore.Query(queryString);
 ReportAppFactory reportFactory = (ReportAppFactory)reportService.Interface;
 if (infoObjects != null && infoObjects.Count > 0)
 ISCDReportClientDocument reportSource = reportFactory.OpenDocument(infoObjects[1].ID, 0);
 Session["ReportClDocument"] = AssignReportParameters(reportSource) ? reportSource : null;
 CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
 CrystalReportViewer1.DataBind();
 //Viewer options
 // Don't enable prompting for Live and Custom
 CrystalReportViewer1.EnableParameterPrompt = !(Request.QueryString["t"] == "1" || Request.QueryString["t"] == "4");
 CrystalReportViewer1.HasToggleParameterPanelButton = CrystalReportViewer1.EnableParameterPrompt;
 CrystalReportViewer1.AllowedExportFormats = (int)(ViewerExportFormats.PdfFormat | ViewerExportFormats.ExcelFormat | ViewerExportFormats.XLSXFormat | ViewerExportFormats.CsvFormat);
 protected void Page_Load(object sender, EventArgs e)
 if (IsPostBack && CrystalReportViewer1.ReportSource == null)
 CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
 CrystalReportViewer1.DataBind();
 private bool AssignReportParameters(ISCDReportClientDocument reportSource)
 bool success = true;
 if (Request.QueryString["t"] == "1" || Request.QueryString["t"] == "2" || Request.QueryString["t"] == "4" )
 reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "STORE", Session["storeParam"]);
 if (Request.QueryString["t"] == "2")
 reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "FromDate", Request.QueryString["fromdate"]);
 reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "ToDate", Request.QueryString["todate"]);
 else if (Request.QueryString["t"] == "3")
 reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "SKU", Request.QueryString["sku"]);
 else
 //Unknown report type alert
 success = false;
 return success;

Thanks Don for your response,
I'm new to the SCN spaces and my content has been moved a couple of times already.
In response to your questions
The runtime is installed on the web application server, if by that you mean the machine hosting the created .NET SDK application.
My question was whether it was also required on the Crystal Server 2011 (I.E. the main enterprise server with CMS and Report management and I guess RAS and all that). I figured this would remain untouched and queries would simply be made against it to retrieve/view reports e.t.c
If install of the SDK on Crystal Server 2011 is indeed required should I expect any interruption to any of the core services after a restart. I.E. I'm hoping that none of the SDK objects would interfere with the existing server objects (in SAP Business Objects)Reason I ask is I note that much of the SDK install directories are similar to the existing Crystal Enterprise Server 2011 (Product 14.0.0)
Is this temp folder to be manually created/configured or is it created by the application automatically to perform tasks. Or are you referring to the default C:\Windows\Temp directory and so saying that the application would try to use this for print and export tasks?Once I'm sure which I'd give the app pool user permission
Printing is to be client side but I figured by default (with the Crystal Report Viewer) it would simply pool and print from the user's printer. This is how it works with the previously used URL reporting approach (viewrpt.cwr). Therefore a user can print the document from wherever they are with their own printer.We don't intend on printing from the server machine, but are you suggesting that a printer must be installed on server (which one web or enterprise server) for any client side printing to work.
App pool is running in 32 bit mode
Initially didn't get anything useful from fiddler but I'd try and look closer on your suggestion.
It's also possible that some of my questions are a misunderstanding of APP vs RAS vs WEB, so please feel free to clarify. Currently I see the Web server as simply the created .NET SDK Application and RAS (Crystal Server 2011 e.t.c) as the existing fully established Application server which I simply pool for information.
Thank you for your patience and advice,

Error with Loading Device Software on 8700 AT&T phone.

Hi. I would like some help with my 8700 AT&T refurb blackberry phone. When I tried to download the device software (v4.5) to my already downloaded DTM (v4.6), it gave me an error message I did not know what to do with.
I want to synch my organizer data (calendar, contacts) from older desktop (Outlook 2002) to my new laptop (Outlook 2007, Windows 7). I am having trouble downloading the supporting device software. I keep getting an error message that reads "Error with the Application Loader. Cannot update software using this system as device is currently activated on a blackberry Enterprise Server or professional software. Contact administrator or check with service provider." I do not use Enterprise. I don't have an internet service plan for my phone as I use it only for calendar and contacts. AT&T gives the software option for AT&T 8700 in English device software as v4.1.0.175 as the only option that is supported by my current platform (2.0.0.90). Is this right?
All I really want to update my phone with the latest software that supports Outlook 2007 on my new laptop. What do I need to make that happen?
Thanks in advance.

Hi there!
Refurbs can be problematic. If a BB was ever activated on BES, then it has an IT Policy. IT Policies are not removed by the standard WIPE actions. Rather, they take additional steps to clean off the Policy.
Just to check, please go to this screen:
Homescreen > Options > Security Options > (Information) or (General Settings) or (something similar)
On that screen will be some selection boxes plus other sections (divided by horizontal lines). If, on that screen, there is any discussion about IT Policy (even if it says "Default"), then you indeed have an IT Policy on your BB. (The screen may also have a section for "Services").
If you don't have an IT Policy, then something else is going on...in which case, stop here and report back exactly what you found on that screen.
If you do have an IT Policy, then, in my view, you have two choices.
1) Since this refurb was provided to you by ATT, they did not deliver to you a "clean" device. You could take it back to them and have them clean the IT Policy off.
2) You can remove the Policy yourself. The process is 100% destructive to the data on the BB, so you'll want to be sure you've already taken a good full backup. Then use Method 3 in this KB.
As for what device OS to install, you have more choices than you indicated. See this page:
https://www.blackberry.com/Downloads/browseSoftware.do;jsessionid=0A15EC28AEC181D3F3F9C5235D9F166A.n...
Select, from the drop-down, your model (8700). The resulting screen shows that ATT is currently supporting 4.5.0.182 (MultiLanguage) for your BB model. The MultiLanguage pack will include English, so you don't have to fall all the way back to the English only version. So, you have choices. The best advice is to use the most recent version -- bug fixes, enhancements, and all of that.
What I advise, since you want to use Outlook 2007, is to use that 4.5.0.182 package for your BB and the most recent RIM desktop package (5.0.1.28). That way, you will have full compatibility for what you are looking for.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

OIM 11g R2 - SOA error with Auto Approval

Hi,
I am trying to provision a resource through catalog wizard as an end user .I have created both Operational Level and Request level approval policies with Auto Approval Enabled.The RequestID is getting generated but I am getting the following error in screen
[Security:090304]Authentication Failed: User SOAAdminPassword javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User SOAAdminPassword denied
May I know where should I go and change the SOAAdmin Password ?.Thanks.

I've run into the same error with oim 11gr2 bp04:
<Mar 18, 2013 11:07:09 AM CDT> <Notice> <Stdout> <BEA-000000> <<Mar 18, 2013 11:07:09 AM CDT> <Error> <oracle.soa.services.identity>
<BEA-000000> <<oracle.tip.pc.services.identity.jps.AuthenticationServiceImpl.authenticateUser()> authentication FAILED>>
<Mar 18, 2013 11:07:09 AM CDT> <Notice> <Stdout> <BEA-000000> <<Mar 18, 2013 11:07:09 AM CDT> <Error> <oracle.soa.services.identity>
<BEA-000000> <<.> Identity Service Authentication failure.
Identity Service Authentication failure.
Either the user name or password is incorrect. Check the error stack and fix the cause of the error. Contact Oracle Support Services if error is not fixable.
ORABPEL-10528
Identity Service Authentication failure.
Identity Service Authentication failure.
Either the user name or password is incorrect. Check the error stack and fix the cause of the error. Contact Oracle Support Services if error is not fixable.
 at oracle.tip.pc.services.identity.jps.JpsProvider.authenticateUser(JpsProvider.java:2337)
Caused By: javax.security.auth.login.LoginException: [Security:090304]Authentication Failed: User SOAAdminPassword javax.security.auth.login.FailedLoginException:
[Security:090302]Authentication Failed: User SOAAdminPassword denied
 at oracle.security.jps.internal.jaas.module.authentication.JpsUserAuthenticationLoginModule.login(JpsUserAuthenticationLoginModule.java:71)
 ...Did you find what the issue is? I'm finding scant information about this user named "SOAAdminPassword" (who makes up these usernames :-/).

SQR issue - (SQR 5721) Error with ioctl()

Similar Messages

Maybe you are looking for