SQR Production Reporting Error

Hi All,
We recently did an upgrade from 9.3.3 to 11.1.2.3 and when I try running a SQR rpoduction report I get the error "Internal error: system 9 platform error: C:\Oracle\Middleware\user_projects\foundation1\ReportingAnalysis\data\JF1\tmp\sqr.exec.bat (access is denied). I see the file sqr.exec.bat is created in teh job factory only when we run the job so not sure how to control it...
Did anyone face the same issue.
Thank you.

Hi,
Can you check JRE version being used for SQR in 9.3.1 version and 11.1.2.2 version?
Note: JRE version should match.
Just for information, the 32-bit version of SQR uses the sqr.ini file and the 64-bit version uses the sqr64.ini .
Please check value of the Environment Variable EPM_Oracle_Home. If this is not set to the proper value than SQR cannot find the SQR, which contains the Hyperion_Home variable.
Please check this location for the sqr.ini and ensure that it contains valid entries.
sqr.ini is located in %EPM_Oracle_Home%/products/biplus/common/SQR/lib directory.
regards,
Harish.

Similar Messages

Web analysis, SQR Production Reporting, and maybe Interact Rpting are dead?

Hi,
I dont wish to hurt anyone but would like to know the facts from experts.
Look Smarter blog says "Web analysis, SQR Production Reporting, and maybe Interactive Reporting are dead?"
http://looksmarter.blogspot.com/search/label/Top10
Is this true?
Thanks,
Shashi

Hi Mehmet,
thank you. I could not answer on friday, was not at office.
I tried according to the instructions of oracle ( http://docs.oracle.com/cd/E17236_01/epm.1112/pr_studio/frameset.htm?data_connection.html ). See comments:
To create an Essbase data source connection:
1. OK
Select Connection on the main SQR Production Reporting Studio screen.
The Create Data Connection wizard is displayed.
2. OK
On the first page, enter a name to identify the data connection.
For example, you could enter Essbase to identify a connection to an Essbase data source.
3. OK
On the second page, select DDO to identify the data source provider.
4. NOT OK. The messages shown: "Unable to start the JVM. Ensure that the JRE section of the SQR.INI file contains the correct directory. (4)"
"Unable to erad DDo Registry.Properties file. Check location and accessibility, an that the sqr.ini DDO pathvariable settings are correct (DDO.3)."
On the third page, select an Essbase data source.
The wizard displays the available registries and data sources.
Seems some setting problems. We would check that. Any suggestions to that error??
Ole

Hyperion SQR Production Reporting and EBS 11i

Hi all,
Is there a way to purchase only "Hyperion SQR Production Reporting", working with Oracle EBusiness Suite (11i) ?
The scope is to migrate Oracle Applications 11.0.3 to 11.5.10.2 (unix platform) including a lot of sqr specific programs (batchs and reports).
-> Instead rebuild them on pl/sql or XML Publisher, we plan to do this by upgrading sqr (actually v4.3.2 running on Oracle 8.0.5).
Thanks in advance for your help.

Please post to the BI Reporting Community

Is Oracle Hyperion SQR Production Reporting certified with Oracle 12 on the redhat linux ?

s Oracle Hyperion SQR Production Reporting certified with Oracle 12 on the redhat linux ?

As per the support matrix Oracle 12 will be supported with 11.1.2.3.500. Check the support matrix at : Supported Platforms Matrices - Oracle Enterprise Performance Management System
Thanks,
KK

SQR - Production reporting deployment in standalone mode

Hi,
I am an essabse developer/admin , and never worked with SQR - production reporting. Now here is an urgent need of an upgrade from version 8 to 9 or 11 for this tool. When i read the oracle documentation they say, we need workspace and HSS. But my question is can we deploy sqr - production reporting in standalone mode like how we do for essbase.
Also if any body has installed , any answer can be helpful thanks!!
Thanks in advance

you can install the PR-client/ PR-studio only. All pure SQR/ PR functionality is in it. But off course you can not mke use of the job and publish functionality.
There is also commandline utilty to overcome most of the missing parts.
good luck. Detlev
Edited by: Detlev on Apr 21, 2010 10:40 PM

Hyperion SQR production reporting 11.1.2 performance after migration from Peoplesoft

Hi,
I am provided with sqr report includes multiple select statements but with simple small joins and also have reference to standard sqc files and other sqc.
I installed SQR on AIX and database as oracle 10g.But now hyperion does not provide any sqc file.
So manually created all sqc.But the report is taking more than 4 hours to produce the output file.Previously users get it in 10 minutes as informed.
Kindly help and suggest how to improve the time,

Please post to the BI Reporting Community

Invoce Aging Report - Error

Hi Team,
I'm trying to run Invoice Aging report. When I'm running this it's erroring out. Here I'm posting log file
Receivables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXRAXINV_SEL_SE module: XXXXX Invoice Print Selected Invoices OBA
Current system time is 20-JUL-2012 11:05:28
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_cust_trx_class='INV'
p_cust_trx_type_id='1'
p_trx_number_low='10040'
p_trx_number_high='10040'
p_customer_id='10041'
p_open_invoice='Y'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='1'
p_debug_flag='N'
p_message_level='10'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00103: lp_trx_date_clause = and a.trx_date = a.trx_date
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 86
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 10040
MSG-43749: There is no remit to address defined for country IT and state .
REP-1419: '': PL/SQL program aborted.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1419: MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 86
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 10040
MSG-43749
Report Builder: Release 10.1.2.3.0 - Production on Fri Jul 20 11:05:30 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Environment
Application: 12.1.3(OBA)
OS: Linux 5 - 64 bit
Please do the needful.
Thanks
Rk
Edited by: user11157039 on Jul 20, 2012 12:47 PM

MSG-43749: There is no remit to address defined for country IT and state .Troubleshooting Remit To Address in Oracle Receivables [ID 1101855.1]
Transactions Workbench: Field Defaulting Logic [ID 1413565.1]
REP-0069: Internal errorARXAGE Aging 4 Bucket Report Errors REP-0069 Internal Error [ID 1321276.1]
Invoice Aging Report Errors With Rep-1419 Rep-57054 Rep-0069 [ID 1340456.1]
'Aging - 7 Buckets Report' ARXAGSW Fails with ORA-01722 [ID 1061714.1]
R12: Some Payables Reports Not Working. Same Errors In Log File: REP-1419, REP-0069, REP-57054 [ID 818320.1]
Thanks,
Hussein

Unable to load report error

Hi
This started with an asp.net application which I have been maintaining for several years, on an XP 32-bits box. Alas, the box died, and I have acquired a new Development machine, now with Windows 7/64-bits. I have installed Visual Studio 2010 and Crystal reports (13.0.,9), including runtime for 32 and 64 bits.
I got the "unable to load report" error, and I think I have tried everything I could find on the web related to solving this issue.
Finally I got Down to creating a new dummy asp.net application with a dummy report just displying the text TEST. This report Works fine when run from within VS, but if I deploy it to the web server on the Development machine I also get the unable to load report failure.
I believe this is a configuration issue. The application has run fine for years, I just can't get it to Work on the new development machine.
Please help
Peter

Make sure that process has read / write rights to the %TEMP% folder. Process Monitor may help.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Production Reporting + Automated Report Generation

Hello,
Does anyone know how to genarate reports automatically by using Production Reporting?
The source data is in Essbase and the data on updated monthly. We should get the updated data on the reports automatically but I do not know how to do it?
What tools (HAL, DIM?) and skills (JAVA, SQR) are needed to get data automatically? The creation of a normal report can be made with graphical user interface.
Br
Mikko

You could set up a dbms_job (unix daemon) to call the report and execute at a given time.
When you call the report then you can pass the parameters without any problem. (with no user intervention)
I don't have any example but you should be able to find a lot of them.

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

Reports Error Page 10g NullPointerException

We have created a JSP report that produces Excel output via method outlined in the example given in the HowTo:
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/excel/index.html
The JSP runs fine under 9.0.2 iAS but when we moved the report to a 10g AS we get the following error:
Reports Error Page
Mon May 24 11:50:26 BST 2004
java.lang.NullPointerException
java.lang.NullPointerException
     at com.evermind.server.http.EvermindBodyContent.setCharacterEncoding(EvermindBodyContent.java:458)
     at com.evermind.server.http.EvermindPageContext.pushBody(EvermindPageContext.java:630)
     at oracle.jsp.runtime.OracleJspRuntime.pushBodyIfNeeded(OracleJspRuntime.java:1385)
     at examples.test._test1._jspService(_test1.java:55)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:349)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
Any ideas what could be causing the report to fail and ways to make the report run under 10g As?

Try adding charset to the content type
e.g:
<%@ page contentType="application/vnd.ms-excel;charset=ISO-8859-1" %>
- Vinayak

Custom xml report errored with :emsg:was terminated by signal 4

Friends,
one of the custom report errored out with the below error:
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 84
stat_high = 0
emsg:was terminated by signal 4
Program was terminated by signal 4
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 5443587.
when browsing metalink I came across few notes and chmged the out put of Active users report to XML which also errored out, the same report was running fine in other environments. we just freshed this from PROD and nothing was changed.
any ideas
Thanks.

Hi Guru,
Application version is 11.5.10.2 and DB 10.2.0.3 running on AIX, Yes it is working on other test environments and production.
here is the error from OPP log
[3/18/10 10:35:17 AM] [UNEXPECTED] [2908896:RT5443609] java.io.FileNotFoundException: /<path>/o5443609.out (No such file or directory)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:129)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:229)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
[3/18/10 10:35:17 AM] [2908896:RT5443609] Completed post-processing actions for request 5443609.
Looks like the output file was not generated as the request errored out.
Thanks.

XL Reporter error at startup

Hello,
I have an error with XL Reporter. I've installed it fine, without errors, but when I try to start in from SBO I get the following message:
Unable to connect to XL Reporter. Error! User Authentication failed. Object: Check DB Version. MEta Partner Objects: 1.75 Partner Objects: 1.81.
Could you please help me,
Thank you,

Irina,
The forum that you have posted your question in is for questions related to the SAP Business One SDK. Your question seems application related to the Business One XL Reporter. While you may get a response here, you may be better served by posting your question in the SAP Business One Discussion Forum and/or creating a message with SAP Support.
With respect to your question ... there could be a variety of reasons that you could receive this error. I have attached one such SAP Business One Knowledgebase that may be what is causing your issue. If you are an SAP Business Partner, please log onto the SAP PartnerEdge Portal and see note 847981. This is the note ....
Unable to connect to XLR after installation - "Partner SAP"
Symptom
When trying to start the add-on XL Reporter after installation, the user gets an error message:
"Unable to connect to XL Reporter,
Error! User authentication failed
Cause: CheckDbVersion
Meta Patner: SBOOEM
Partner: SAP"
See attachment.
Other terms
add-on, XLR, XL Reporter, SAP, SBOOEM, upgrade, checkdbversion, Business One, B1, SBO
Reason and Prerequisites
This is because the old stand-alone version of XL Reporter previouslyhas been installed on the company database you are trying to use. This version used the partner code SAP, while the add-on version uses the code SBOOEM. The installation does not recognize this as an upgrade.
Solution
Start the Enterprise Manager from the Microsoft SQL Server program folder on your Start menu. Browse down to your Business One database, expand and choose tables. Right-click the table called ixtdbversion and choose Open table -> Return all rows. In the column 'Partner' change the text from SAP to SBOOEM and press Enter. Close the Enterprise Manager and start the add-on. The XL Reporter information in the database should now be upgraded.
Note: The report definitions created on the old stand-alone version, will probably not function straight away, as changes has been done to the Meta database. You should therefore edit the definitions before you start using them in production.
HTH,
Eddy

MX7 Updater report error

I have used the MX 7.01 updater to the version of
7,0,2,137072 . Since I have run this updater I not get a when I run
a report, error as follows:
Measage:Report compilation error. Error at (135, 20: null
Type: coldfusion.util.RuntimeWrapper
I have rolled back on the production server, can anyone help
please? I assume the new updater would contain all the lastest
patch updates. Im not sure what to do now
Many Thanks
Wayne

quote:
Originally posted by:
edwelch4
I think that I found a solution. There is an update to the
report builder to 7.0.2. I installed the updated version of report
builder and then made a small change to the report and then saved
and now the report works. No more error.
Here is the link..
http://www.adobe.com/support/coldfusion/downloads.html#cfdevtools
The build number of the updated CF report builder is 142150.
Give it a try...
That was the first thing I tried... it also didn't work :(
Anybody care to cough up 500 bucks for a support ticket? I
can't convince people here to do it :(

Report error problem

Hi,
could anyone help me with Oracle Reports error please?
When I run Oracle Report Request from EBS I got:
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
It was working ok for now, but for 1 report (about I know now) it gets error.
It is run with args like:
P_QUOTE_HEADER_ID='50509'
P_QUOTE_HEADER_COMP_ID='50498'
P_QUOTE_HEADER_PROD_ID='49832'
P_ADJ_LINE_ID='3380471'
P_TASK_ID='28075'
P_CONTEXT='Default'
P_TOTAL_NRE='0.0'
P_ORG_INV_ID='138'
and it crashes :/
But when I use Oracle Reports Builder to manually generate xml data it works fine
Other reports work ok, and arguments are similar - like:
P_QUOTE_HEADER_ID='49778'
P_QUOTE_HEADER_COMP_ID='49777'
P_QUOTE_HEADER_PROD_ID='49256'
P_ADJ_LINE_ID='3364766'
P_TASK_ID='27875'
P_CONTEXT='Default'
P_TOTAL_NRE='0.0'
P_ORG_INV_ID='138'
(and then report is generated correctly)
I don't have a clue what could be a problem (as it works in Reports Builder and similar reports work fine) - if anyone could help or have an idea what could be a source of my problem?

Last changes are from begining of December - and all reports were generated fine, but now I got information about this one which has error.
log:
Quoting: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XX_QOT_PRINTQUOTE module: FID: Print Quote
Current system time is 09-JAN-2013 13:26:25
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_QUOTE_HEADER_ID='50509'
P_QUOTE_HEADER_COMP_ID='50498'
P_QUOTE_HEADER_PROD_ID='49832'
P_ADJ_LINE_ID='3380471'
P_TASK_ID='28075'
P_CONTEXT='Default'
P_ORG_INV_ID='138'
-- Start of Reports Command --
/ORACLE/inst/apps/POLIGON_devappl/ora/10.1.2/bin/appsrwrun.sh
P_CONC_REQUEST_ID=34404257
P_QUOTE_HEADER_ID='50509'
P_QUOTE_HEADER_COMP_ID='50498'
P_QUOTE_HEADER_PROD_ID='49832'
P_ADJ_LINE_ID='3380471'
P_TASK_ID='28075'
P_CONTEXT='Default'
P_ORG_INV_ID='138'
report=/ORACLE/apps/apps_st/appl/qot/12.0.0/reports/US/XX_QOT_PRINTQUOTE.rdf
batch=yes
destype=file
desname=/ORACLE/inst/apps/POLIGON_devappl/logs/appl/conc/out/o34404257.out
desformat=XML
-- End of Reports Command --
Request language is :
AMERICAN
Request territory is :
AMERICA
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
Previous NLS_LANG Environment Variable was :
AMERICAN_AMERICA.EE8MSWIN1250
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_AMERICA.EE8MSWIN1250
Enter Password:
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Wed Jan 9 13:26:27 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Reset original NLS_LANG in environment as :
AMERICAN_AMERICA.EE8MSWIN1250
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 34404257.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Output file size:
0
Finished executing request completion options.
Concurrent request completed
Current system time is 09-JAN-2013 13:26:29
---------------------------------------------------------------------------

SQR Production Reporting Error

Similar Messages

Maybe you are looking for