Sqr's quit running - only solution is reboot of windows server

Just curious if anyone else has experienced this problem. Our SQR's, crystals, NVisions randomly quit running and the only solution is to reboot the windows server. We are pt 8.49.05, and fins 9.0. Stopping/starting apps,prcs servers do not fix the problem. Nor, does clearing cache. Any suggestions?

I think we found the problem. We have processes to print and reprint invoices. When the invoices are done, they are ftp'd to another server. the ftp.txt file that houses the ftp commands, did not have the bye command in it and therefore never returned to the .bat file that kicked it off. Over the course of a few days, we would end up with several cmd.exe and ftp.exe and of course the old' acrord32.exe processes that did not get killed. We moved the bye command into the .txt file, and now all we have to do is find a way to kill that acrord32.exe cleanly after invoices are reprinted. Thank you all for your suggestions.

Similar Messages

Unexpected Server Reboot on Windows Server 2012 Standard

Hi All,
I have received unexpected reboot on Windows Server 2012 Standard . After searching on the internet I found one
hotfix for this, but it is applicable for Windows 2008 R2. Link to download Windows 2008 R2
hotfix -
http://support.microsoft.com/kb/2732595/en-US
Can someone guide me to get a same
hotfix for Windows Server 2012 Standard.
Log Name:      System
Source:        User32
Date:          2/27/2014 7:27:17 AM
Event ID:      1074
Task Category: None
Level:         Information
Keywords:      Classic
User:          SYSTEM
Computer:      Server1.test.com
Description:
The process wininit.exe has initiated the restart of computer "Server1" on behalf of
user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
Thank you.
Regards,
Mahesh Arban.

Hi Mahesh Arban,
Sorry for my delay.
I can’t find the same hotfix for Windows Server 2012 Standard. So, we may need to do some troubleshootings
to narrow down this issue and solve it.
Please let me confirm if you have installed all updates for this Windows Server 2012 Standard. Meanwhile, please
use Sfc command to scans and verifies the integrity of all protected system files.
In addition, this issue caused to unexpected server reboot. So, please configure and then collect the dump
file to analysis. It may help us to find the root cause of this issue.
How to read the small memory dump file that is created by Windows if a crash occurs
http://support.microsoft.com/kb/315263/en-us
By the way, can you find any error messages in application log (such as Event ID 1000 or others) after this
issue occurred?
Hope this helps.
Best regards,
Justin Gu

Unable to bind MacBook Pro (running 10.6 - Snow Leopard ) to Windows Server 2003 domain

Hi there, I've been working on this problem for a few hours now (and a few hours last Thursday) and don't feel I'm getting anywhere, so I'm reaching out for help....
My organisation has just purchased a new MacBook Pro, running Snow Leopard (OSX 10.6) and as a Technical Support Engineer I have been asked to configure it for an end user.
I am currently trying to join it to our corporate domain, which is a Windows Server 2003 domain operating at the Windows Server 2003 Native domain functional level.
The MacBook is configured to use DHCP, and has been assigned valid IP address, DNS servers etc by the DHCP server. It can resolve all names on our network, including the names of our domain controllers. When I use nslookup to resolve the name of the domain "my_domain.local" it returns a list of DC's on the domain, which would indicate to me that name resolution is working perfectly. It is using our primary DNS server, 'Ponus' to resolve these names - Ponus is also the Domain Controller in this site.
To attempt to join the MacBook to the domain I have created a computer account for it on the domain, in the Computers container. I have gone into System/Library/Core Services and run the Directory Utility.
In the directory Utility I have ticked Active Directory and clicked on it to edit. The 'Forest' field is greyed out and set to 'Automatic', in the 'Domain' field I have entered my_domain.local, which is the FQDN of my domain. I click Bind and when prompted enter my Domain Admin username and password (in the 'Create Computer Account in:' field it displays correctly as CN=Computers,DC=my_domain,DC=local.)
When I click OK I get the message: Invalid domain. An invalid Domain and Forest combination was specified. You should enter a fully qualified DNS name for the domain and forest (e.g., ads.company.com).
I have attempted writing the domain as my_domain.local, my_domain.local., MY_DOMAIN.LOCAL and MY_DOMAIN.LOCAL. but I get the same error each time. I have checked and rechecked DNS is resolving OK, and cannot see why it cannot find the Domain and Forest from the FQDN that I am entering. Even so I tried creating records in the hosts file on the MacBook to point to the main Domain Controller at this site (Ponus) but this didn't change anything.
I have seen a few people report the same issue online but the responses tend to fizzle out before anyone gets to the bottom of it. I have seen some indication that people with an understore (_) in their domain name, or with a .local domain name may experience issues with joining Mac hosts, however these details are very vague and if true there must be a workaround.
If anyone could help me with this I would greatly appreciate it, I'm running out of time to complete this work and have run out of things to try.
I have an inkling that this is due to the Mac for some reason not reading the SRV records for the DCs and LDAP in DNS, or to do with the Mac looking only at one SRV record (ie. there is one for a new DC that we haven't deployed yet), not being able to reach this and giving up, but I'm clutching at straws really with my limited knowledge of the Macs process for joining the domain.
Many many thanks,

Hi there,
A simple suggestion , please make sure both MacBook Pro clock and the server clock are the same meaning the hour/Min/ sec both should match. A least difference of 3 seconds is fine.
I had faced this problem in many place and only solution was to match the time and it will bind immediatly.

Running Forms and Reports 6i on Windows Server 2003

Hello,
Has anyone managed to get Forms and Reports 6i (running on 9iAS web) to run succesfully on Windows Server 2003? If so would you mind sharing what you needed to do to get it to work. I don't care about any of the other components of 9iAS other than forms and reports. Also is it possible to run on the 64bit version of this OS?
The problem I'm encountering (on the 64bit version of Windows) is that I can't get our webforms to launch any reports. The forms run just fine. I can run the report manually using rwrun60.exe and entering all the parameters by hand. BUT when I run the report from within the form a rwrun60.exe process starts and runs at full cpu. After a bit it dies but the form still continues to wait for it. The only way to get out is to close the browser and forcefully kill the form instance. If anyone has any ideas on what this could be any help is appreciated.
Thanks

Hi Jan,
I haven't tried to run Forms and Reports on Windows Server 2003, but I have worked on Windows XP and UNIX with F/R 6i 9i and 10g. I never had much luck with 9i Forms and Reports, 10g rel 1 was better, but 10g rel 2 is best. I recommend you bite the bullet and convert to 10g AS, Forms & Reports 10g rel 2. After running your 6i F/R to 10g through the converter, you may need to adjust fonts and colors.
Regarding your specific question, I am surprised that the rwrun60 works at all with 9i AS. And rwrun90 probably won't run the 6i version of your reports without recompiling in the 9 version.
Hope this helps,
Frank

Unable to run script (.bat file) on a windows server

Hi,
I have a job definition which execute cmd command (such as cd, echo, etc) through a platform agent installed on a Windows server but when I try to execute scripts (i.e. .bat file) it doesn't work.
Can someone help, please ?
Regards.

Hi,
The PA is running with the same account executing the .bat file on the server.
Yes, the bat file can be executed with that user outside of CPS.
Regards

Running Crystal Report 10.2 on windows server 2008

Hello, Everyone,
I am migrating my ASP.NET application from windows sever 2000 to windows server 2008.
I have Crystal reports that was converted from version 9.1 to version 10.2, and application is using ASP.NET 2005.
I have installed on the server .net framework 3.5 and 4.0. Also Installed CRRedist2005_x86.msi u2013 Crystal Report redistributable package for .net Framework 2.0. To my understanding i dont need to install .net framework 2.0 since i have 3.5 installed.
Web app is running fine, but when i am running Cryastal Report I see the page that displays report, it is up for a second or two and when report is starting to generate page is closed. No errors.
Does anyone experiencing the same problem running CR 10.2 on windows server 2008? Am i missing something?
Can somebody help me?
Thanks,
Michael

CR 10.2 is not supported on WIN 2008. See [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki for more details.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Websense Question: Should I run on a CE or a windows server?

Pro's & Con's for both?

I think you can run either Windows CE or a Server. This will not affect the performance to a great extent.

IDCS2: Can only open an .indd Ready Only from smb share on Windows Server

Is there any way to save an open .indd document back to a smb share on a Windows server? I know the preferred Abobe method is to drag the file from the server to the desktop, edit it there, then close InDesign and drag the file back to the server. I first encountered this problem when I moved the shared publishing folder from an NT 4 server to 2003 Server which didn't support afp shares. As long as I kept my OS X Macs from updating past 10.4.0, I could still save back to the Samba share on the Windows sever.
Recently, I moved everything again to a Windows 2008 Active Directory domain server. After fixed the whole "digitally sign communications' security settings problem so my Macs could actually connect, I found I could no longer automount server volume by dragging the into Logon Items.
Letting my G5 Macs update to OS 10.4.11 fixed that, but now I can't save back to the server from inside InDesign again. I'm dealing with students (and instructors) and presenting them with a convoluted procedure for opening and saving files and saying blame it on Apple/Microsoft/Adobe doesn't fly too well. It's been about three years, please tell me there is a fix or a better workaround.

-36 is a bit generic, but usually means the Windows® machine is denying because of bad Password. Have you tried deleting that particular reference/share in Keychain Access and redoing it?

Two VMs inside Hyper-V Under 2012 Essentials R2? Need 2003 To Run as Well for CRM and SQL Server

We are a small office (8 users) with a new server on the way. We are running Server 2003 and CRM 4.0 and will upgrade to Server 2012 Essentials R2. I would like to run this as a VM and integrate Azure's cloud backup. The problem --and I'd
like to be wrong about this -- is there is no included SQL server with Essentials 2012. Our old server has SQL server 2005 which I believe was included. Our database is only 1.6GB so we could use the free version of SQL Server 2014, but it is limited
to one CPU. Our new server is dual CPU, 8 total cores. My thought is to use P2V and make a virtual machine from my current 2003 server, then run that inside the Hyper-V environment along with 2012 Essentials.
So I have two questions? Does the Essentials (or Hyper-V) licensing permit me to run any more VMs than the single instance of 2012 Essentials? And secondly, will the primary 2012 Essentials installation acting as the Hyper-V administrator be
able to use Azure to back up both virtual machines?
If I am acting on any incorrect assumptions please correct me.

I suggest that you follow your own suggestion on what to believe from posts. Read the EULA on Essentials on your own. And talk to a trained Microsoft licensing specialist. Some of your assumptions are not valid.
"I have purchased Server Essentials 2012 R2, which allows for one instance to implement the hypervisor and one instance of a virtual machine."
From the data sheet describing Server Essentials is this statement - "
With Windows Server 2012 R2 Essentials, the product licensing terms have been expanded to enable you to run one operating system instance on the physical server in order to run Hyper-V, plus a second instance on that server in order to run Essentials as
a virtual machine.
Therefore, the only VM you can legally run under Essentials is another copy of Essentials.
"Furthermore it would be foolish for Microsoft to deny me additional virtual machines under that scenario since I can install Hyper-V Server 2012 R2 for free and use Essentials to manage it."
FALSE. Actually, virtualization rights are part of the Server operating system license. Since the license is written by Microsoft, they can include whatever limits they deem appropriate. In fact, when looking at Standard and Datacenter
Editions of Windows Server, the ONLY difference between the two are the virtualization rights included with the operating system. Your assumption that you can run it for 'free' under Hyper-V Server is incorrect. True, Hyper-V server is
a no-cost download from Microsoft, but it does not include any operating system licenses. Those must be purchased separately. Licenses are assigned to physical machines, not to virtual machines. So it would be possible to use your 2003 license
on a Hyper-V Server instance, but only if it is a non-OEM license. OEM licenses are non-transferrable from the hardware with which they were sold.
"It would also be foolish because I could virtualize everything under VMWare's ESXi --for free--"
FALSE. Same reason as given above.
Lastly, be forewarned about P2V of a Windows Server 2003 machine. If you spend any time reading this forum, you will find lots of horror stories about people having less than successful attempts at P2V'ing WS2003. The recommendation is to build
a 2003 VM from scratch to avoid the many pitfalls, assuming you do not have an OEM license. Of course, even then you are still putting a business critical system on an operating system that is dropping support come July of next year, followed shortly
thereafter by no support on SQL 2005. Bottom line is that you would most likely be better served by trying to upgrade your application to a version that runs on the current release of Windows Server.
. : | : . : | : . tim

SharePoint Foundation 2010 SP2 running on Windows Server 2012 R2

Hello
I have upgraded a standalone Windows Server 2008 R2 running SharePoint Foundation 2010 SP2 to Windows Server 2012 R2. The upgrade completed OK and SharePoint Foundation 2010 SP2 is running OK as before upgrade.
Is anyone aware of any issues running SPF 2010 SP2 on WS2012 R2?

Hi
no issues using SP2
For more details check this official doc
http://support.microsoft.com/kb/2724471
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

How well will Windows Server run in a virtual machine on OS X Server?

Does anyone have any experience running any of the flavors of Windows Server in a virtual box (either Parallels or VMware) on OS X Server?
I'm looking at setting up a new server. There are a couple of things for which windows is required. I could set up a separate windows box for these, but I'm wondering if it's feasible to set up Windows Server in a virtual box, and solve my problem that way?
The first requirement is to run an Intuit service for running Quickbooks in a network configuration
The second is a small SQL Server database. My plan is to migrate this to MySql eventually, but that is lower on the priority list.

Since you're on Windows 7 I'd probably go for using VirtualBox
https://www.virtualbox.org/ to host the virtual machine.
Downloading 2012 depends what you're after really, if you've got TechNet / MSDN then you can download it from there, otherwise you'd need to have a licenced copy. You can download 180 day evaluation versions from the Microsoft website here :
2012 - http://technet.microsoft.com/en-gb/evalcenter/hh670538.aspx
2012 R2 -
http://technet.microsoft.com/en-gb/evalcenter/dn205286.aspx

Can SCVMM 2012 R2 Operate Without Problems If Hyper-V Environment Is Running Windows Server 2012?

Good afternoon,
Are there any repercussions to using SCVMM 2012 R2 in a Hyper-V environment that is running Windows Server 2012? My Hyper-V hosts are running Windows Server 2012.
Thanks,

Hi,
running SCVMM 2012 R2 in a Windows Server 2012 Hyper-V environment is fully supported
best regards Marc Grote - www.it-training-grote.de

Mackeeper has detected a virus in the time capsule back up - it is not possible to dele - it ite the file. Do I find time capsule in finder and delete the whole computer back up, then crate a fresh back up? Is that the only solution please?

mackeeper has detected a virus in the time capsule backup, it is not possible to delete the infected file. Do I mount time capsule in finder and then consign to junk the whole computer backup then create a fresh backup? Is that the only solution please.

Follow these instructions to uninstall MacKeeper. They have been tested with the most recent version of MacKeeper. Earlier versions than the one released in 2012 require more extensive work to uninstall all its components. Never install such junk on a Mac.
If you actually used MacKeeper to alter your system, e.g. "remove excess binaries" or such, you will need to reinstall OS X as well as all your additional software. Uninstalling MacKeeper is insufficient to reverse the corruption it is capable of - once again, that is if you used it.
If you merely installed MacKeeper but did not use it to perform any particular action, the following instructions will suffice.
If you used MacKeeper to encrypt any files or folders, use MacKeeper to un-encrypt them first.
Quit the MacKeeper app if it is running.
Open your Applications folder: Using the Finder's Go menu, select Applications.
Drag the MacKeeper icon from your Applications folder (not the Dock) to the Trash.
You will be asked to authenticate (twice):
You do not need to provide a reason for uninstalling it:
Just click the Uninstall MacKeeper button. You will be asked to authenticate again.
After it uninstalls you may empty the Trash and restart your Mac. All that will remain is an inert log file that does nothing but occupy space on your hard disk.
May I suggest that you review the following setting in System Preferences?
Although you may easily override that setting, it will serve to protect you from inadvertently installing garbage. The overwhelming majority of Macs I come across have the MacKeeper installer file already present in their Downloads folder, often multiple copies of it. The downloaded file itself can do nothing until it is opened and installed, and the above setting (known as Gatekeeper - not to be confused with MacKeeper) will prevent that from occurring.

When I close Firefox and try to restart it, my system thinks it's still running, and I must reboot in order to start Firefox 3.6.11.

When I close Firefox and try to restart it, my system thinks it's still running, and I must reboot in order to start Firefox 3.6.11. I'm running Windows Vista and this is the only program that has this problem. Another symptom is the program does not show up in my recently used programs list nor is it in the task list once I've closed it, though Windows will not open it because it thinks it's still running.

I am also using Windows Vista 64 bit and have the same problem..what i do is instead of rebooting the computer press CTRL ALT and DELETE key. start the task manager and go to the Process tab and look for firefox .exe click on it and hit the end process tab. close that window and firefox should run... and this problem started when i upgraded to firefox 3.6.12
If anyone has a permanent solution please post.

N680GTX Twin Frozr 2GD5/OC runs only in PCIe X16 1.1 Mode

Hi Forum,
GPU-Z shows me that my GPU runs only in PCIe X16 1.1 Mode. The System is a quite new Dell Precision T7910 with Intel C612 Chipset. A Quadro 4000 cards runs like designed in PCIe 2.0 Mode. In the next Slot it runs in PCIe x4 2.0, because its electrical x4 only. The GTX 680 runs there in PCIe 1.1 x4.
The strange thing is, if i start GPU-Z directly after boot, it show the card is PCIe 3.0 running in PCIe 1.1, some seconds later screen gets black for a part of a second, than its PCIe 1.1 running @ PCIe 1.1 .
Any Ideas ?

REmove nvidia drivers in safemode using >>Driver Fusion<< or similar driver removal tool. After reboot install current nvidia driver.
If no luck >>Clear CMOS<< of the board and retry.

Sqr's quit running - only solution is reboot of windows server

Similar Messages

Maybe you are looking for