Sqr threw process scheduler
Hi I am running a sqr report with ps but the run status is coming as Error ,but pdf is opening suggest me how to get status as success ? what are the header files i need to include ?
did you include Stdapi.sqc and called procedures stdapi-init, stdapi-term
something like this
begin-program
do stdapi-init
do Main
do stdapi-term
end-program
#include 'stdapi.sqc'There are plenty of samples to be found in your PS_HOME folder
PeopleBooks > PeopleTools 8.52: SQR Language Reference for PeopleSoft > Using SQR Sample Programs
Similar Messages
-
Component is not getting displayed in process scheduler menu
Hi All,
I have created a project and created/registered a component in that project. I have also added a page which is having a record definition with a record named L_RUNCNTL having two search fields, to this component and configured L_RUNCNTL as search record for this component.
I have registered this component with below details:
Menu Name : PROCESS_SCHEDULER
Bar Name : PROCESS
Folder Name as PT_PROCESS_SCHEDULER
Select “Always Use default local node?” Check box
Permission List : PTPT1000
But after registration, when I open process scheduler menu I dont see this component listed. However, previously I created a component in this project and registered it with same details given above and I could see it in process scheduler menu.
I am surprised why another component registered with same details is not getting displayed in process scheduler menu.Thanks Michel,
I got this problem resolved. Here is what I did:
Ran portal security sync at the navigation PeopleTools > Portal > Portal Security Sync.
Cleared browser cache, accessed the page again and saw the link was available. -
How to print of a crystal output on paper through process Scheduler in PeopleSoft.
Post Author: rajaumareddy
CA Forum: Charts and Graphs
while printing crystal through process scheduler in PeopleSoft it giving Error as Runstatus. and i given in Printer destination.
Could u help me to find solution.
1. what are process scheduler setup.
2. Is there any Sever side setup (Default server)Srinivas, Thanks for your quick reply.
This is smartform, and sending the output as pdf, except the the first page on which I have the text to be printed on the email body. In this email body text I have to display an email.
when user clicks on the email should open an outlook with the email id in the TO. Hope this helps.
Thank you,
Surya -
Error in creating the process scheduler
Hi all,
I recently installed with Peolesoft 8.9 and tools 8.49 and oracle 9i.
Now i tried to create the process scheduler.
I have got the error in the image http://narchu.coolinc.info/install_failed.html
what i did.
from the menu i selected to create a new process scheduler.
gave the name as fsdmo
configure? yes
changed the username to VP1
changed the password to VP1
and then load the config as shown.
start the process scheduler.
then it gave the error in the image in the above link.
The password is not gettin encrypted. i think it must be encrypted, but i am not sure.
Can any one please help solving it.
Thank you,
Bye.I think if it is default installation without screwing anything VP1 can start app and Proc server.
But Nicolas is right, to get more we need log file....it may be database connectivity issue, password encryption issue , tuxedo issue and much more.If u can post the logs it will helpful to diagnose your issue. -
I am getting the below error while bringing up the Process Scheduler error
Hello ,
I am getting the below error while bringing up the Prcs Scheduler.
Cannot open message catalog TMADMIN_CAT
Starting Process Scheduler Server PSNT for Database FSUAT ...
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 752; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
INFO: BEA Tuxedo, Version 8.1, 32-bit, Patch Level 192
NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1571; check TUXDIR=C:\
bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1570; check TUXDIR=C:\
bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 793; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
exec BBL -A :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUX
DIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 801; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
exec PSDSTSRV -p 1,600:1,1 -sPostReport -- -C psprcs.cfg -CD FSUAT -PS PSNT -A s
tart -S PSDSTSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 1685; check TU
XDIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
tmboot: NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 827; check TUX
DIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
tmshutdown -y
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 753; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 916; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 907; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 936; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 948; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 775; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
Please suggest.Duplicate thread :
Re: I am getting the attached error while bringing up the Prcs Scheduler
Nicolas. -
Getting error while posting reports on Unix Process Scheduler Server
Hello ,
I am getting the below error while posting reports on Unix Process Scheduler Server .
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) HTTP transfer error.
PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) Post Report Elapsed Time: 0.0900
PSDSTSRV.14171 (10) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
Please advise ,thank you.user5838027 wrote:
Node name :PS_HTTP
URL: http://ddas1020.dev.com:16000/psreports/hrdmo
URI:SchedulerTransfer/hr90dmo
URI Port: 16000
Please let me know if any other info is needed.
Thanks.
typo...
URL: http://ddas1020.dev.com:16000/psreports/hr90dmo
Hopefully, your application URL looks like http://ddas1020.dev.com:16000/psp/hr90dmo/..., your URI host looks like ddas1020.dev.com (or corresponding ip address), and hhtp is checked.
Did you also tried to give the web login/password ?
Nicolas. -
Process scheduler picking up trace settings that are not currently on
I'm running a custom application engine program. I tested the program in the same instance last week with a full trace turned on. The trace was turned on under processes. I've since refreshed the database and dumped the process scheduler cache (Unix process scheduler). After the refresh, I turned off the process trace. I ran a quick test of the program to see what the trace settings are. To my disappointment the full trace is still showing at the end of my parameters list in the process monitor. I've tried forcing a trace -0, the parameters will not change. It's very, very strange. Unforuntately, I have to process a lot of data using this application engine program using CI. Is there any other area in Peoplesoft that I might be forgetting that an application engine trace can be turned on?
How have you refreshed the database ? How did you re-apply your customization after refresh ? How is defined the prcs ? Did you change the prcs configuration file to set the trace off ? Did you checked the process definition ?
Nicolas. -
App Server and Process Scheduler stuck while booting
Hi All,
We are facing a big issue in our production instance.The application server showed down while accessing the PIA.When we tried to reboot the same it didnt start and was getting stuck after some steps..few snipets are below after the last PSSRENSRV process does not proceed further.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5584 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5600 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5616 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5632 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5648 Assume started <pipe>.
exec PSSAMSRV --A -- -C psappsrv.cfg -D FNPROD -S PSSAMSRV:
CMDTUX_CAT:819: INFO:Process id=5664 Assume started <pipe>.
exec PSRENSRV --A -- -C psappsrv.cfg -D FNPROD -S PSRENSRV:The tuxedo,appserv and renserv logs shows,
renserv log
----- Begin booting PSRENSRV -------------------------
0.5608 [14/Jul/2011 07:51:54](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.
----- Begin booting PSRENSRV -------------------------
0.5056 [14/Jul/2011 07:58:47](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.
----- Begin booting PSRENSRV -------------------------
0.780 [14/Jul/2011 08:21:04](ERROR) CRenTuxSvcMgr::ReqBootParameters - Tux service call failed.------------------------------------------------------------------------------------------
tuxedo log
receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!JSH.5060.5084.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
082104.UKLO2K3S55!WSH.4364.1752.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!WSH.4472.4416.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!WSH.1684.4128.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!WSH.4256.4172.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!JSH.4876.496.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
082104.UKLO2K3S55!WSH.4896.4284.0: WSNAT_CAT:1107: ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV
082104.UKLO2K3S55!JSH.4800.1036.-2: JOLT_CAT:1107: "ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV"
082104.UKLO2K3S55!WSL.3904.4032.0: LIBTUX_CAT:703: ERROR: Cannot get statistics on message queue 43
082104.UKLO2K3S55!JSL.4316.4024.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
082104.UKLO2K3S55!WSL.3904.4032.0: WSNAT_CAT:1197: INFO: Exiting system
082104.UKLO2K3S55!JREPSVR.5768.5800.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 61480 (errno = 22)
082104.UKLO2K3S55!WSL.3904.4032.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
082104.UKLO2K3S55!JSL.4316.4024.0: JOLT_CAT:1197: "INFO: Exiting system"
082104.UKLO2K3S55!JREPSVR.5768.5800.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
082104.UKLO2K3S55!JSL.4316.4024.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
082105.UKLO2K3S55!PSWATCHSRV.6124.568.-2: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=2,buf=9580216,bytes=4572,type=-1073741824,flag=2048
082105.UKLO2K3S55!PSWATCHSRV.6124.568.-2: LIBTUX_CAT:268: ERROR: Failed to stop serving------------------------------------------------------------------------------------------
app serv log
PSADMIN.4944 (0) [07/14/11 07:48:28](0) Begin boot attempt on domain FNPROD
PSWATCHSRV.4720 (0) [07/14/11 07:48:33] Starting
PSADMIN.4944 (0) [07/14/11 07:52:29](0) End boot attempt on domain FNPROD
PSADMIN.4944 (0) [07/14/11 07:55:46](0) Begin boot attempt on domain FNPROD
PSWATCHSRV.1412 (0) [07/14/11 07:55:50] Starting
PSADMIN.4892 (0) [07/14/11 08:08:07](0) Begin boot attempt on domain FNPROD
PSWATCHSRV.5032 (0) [07/14/11 08:08:13] Starting
PSADMIN.4892 (0) [07/14/11 08:08:27](0) End boot attempt on domain FNPROD
PSADMIN.6104 (0) [07/14/11 08:20:28](0) Begin boot attempt on domain FNPROD
PSWATCHSRV.6124 (0) [07/14/11 08:20:32] Starting-----------------------------------------------------------------------------------------
tuxedo log
213815.UKLO2K3S55!PSSAMSRV.6072.6040.0: LIBTUX_CAT:262: INFO: Standard main starting
213815.UKLO2K3S55!PSRENSRV.2440.2444.-2: 07-13-2011: Tuxedo Version 8.1 32-bit Windows.
213815.UKLO2K3S55!PSRENSRV.2440.2444.-2: LIBTUX_CAT:262: INFO: Standard main starting
214434.UKLO2K3S55!BBL.5964.4464.0: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=257,buf=10285048,bytes=4572,type=-1073741824,flag=0
214434.UKLO2K3S55!PSRENSRV.2440.2444.-2: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=277,buf=11551960,bytes=8668,type=805306369,flag=0
214434.UKLO2K3S55!BBL.5964.4464.0: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=257,buf=10285048,bytes=4572,type=0,flag=0
214434.UKLO2K3S55!BBL.5964.4464.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 33242 (errno = 22)
214434.UKLO2K3S55!BBL.5964.4464.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
214434.UKLO2K3S55!BBL.5964.4464.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
214434.UKLO2K3S55!PSWATCHSRV.5208.4528.-2: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=258,buf=9654368,bytes=27996,type=-1073741824,flag=2048
214434.UKLO2K3S55!PSWATCHSRV.5208.4528.-2: LIBTUX_CAT:268: ERROR: Failed to stop serving
214507.UKLO2K3S55!tmboot.4616.5152.-2: 07-13-2011: Tuxedo Version 8.1 32-bit Windows.
214507.UKLO2K3S55!tmboot.4616.5152.-2: TUXNT_CAT:4: ERROR: Cannot access ipc server (The system cannot find the file specified.
214507.UKLO2K3S55!tmboot.4616.5152.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
214508.UKLO2K3S55!PSADMIN.868: End boot attempt on domain FNPRODAlso the process scheduler was not getting booted the logs are shown below,
scheduler log
085646.UKLO2K3S55!restartsrv.2484.4116.-2: server BASE/101: CMDTUX_CAT:587: INFO: Cannot restart server, scheduling for cleanup
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:550: WARN: Cleaning up restartable server BASE/101
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 4300 died; removing from BB
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5372 died; removing from BB
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5640 died; removing from BB
085653.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:216: WARN: Process 5768 died; removing from BB
085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: 07-14-2011: Tuxedo Version 8.1 32-bit Windows.
085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: GP_CAT:1077: ERROR: Unable to open environment file E:\Psoft\PRDAPP\appserv\prcs\FNPROD\psprcsrv.env for reading
085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: LIBTUX_CAT:353: ERROR: Error putting ENVFILE E:\Psoft\PRDAPP\appserv\prcs\FNPROD\psprcsrv.env into environment
085653.UKLO2K3S55!cleanupsrv.4148.4364.-2: server BASE/101: CMDTUX_CAT:551: INFO: server removed
085743.UKLO2K3S55!BBL.4044.5996.0: ERROR: msgrcv err(LIBTUX_CAT:666: ERROR: Message operation failed because the queue was removed): errno=100,qid=80,buf=10304328,bytes=4572,type=-1073741824,flag=0
085743.UKLO2K3S55!BBL.4044.5996.0: ERROR: msgrcv err(LIBTUX_CAT:669: ERROR: Message operation failed because of the invalid message queue identifier): errno=22,qid=80,buf=10304328,bytes=4572,type=-1073741824,flag=0
085743.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:271: ERROR: System lock semop failure, key = 64479 (errno = 22)
085743.UKLO2K3S55!BBL.4044.5996.0: LIBTUX_CAT:268: ERROR: Failed to stop serving
085743.UKLO2K3S55!BBL.4044.5996.0: CMDTUX_CAT:26: INFO: The BBL is exiting systemIs this a problem with Tuxedo if so what has to be done...Pls help its a bit urgent...
Thanks in advance...First of all; if a problem is urgent then you should always contact Oracle support instead.
It looks like the domain is corrupt within Tuxedo. You could try to reconfigure the domain so that it will get recreated in Tuxedo. Make sure you have a backup before you do this. To reconfigure the domain simply open a CMD box and type the following command (from the appserver directory):
psadmin -c configure -d "DOMAIN_NAME"
You can only use this command for the application server. -
Issue with Bulk Load Post Process Scheduled Task
Hello,
I successfully loaded users in OIM using the bulk load utility. I also have LDAP sync ON. The documentation says to run the Bulk Load Post Process scheduled task to push the loaded users in OIM into LDAP.
This works if we run the Bulk Load Post Process Scheduled Task right away after the run the bulk load.
If some time had passed and we go back to run the Bulk Load Post Process Scheduled Task, some of the users loaded through the bulk load utility are not created in our LDAP system. This created an off-sync situation between OIM and our LDAP.
I tried to use the usr_key as a parameter to the Bulk Load Post Process Scheduled Task without success.
Is there a way to force the re-evaluation of these users so they would get created in LDAP?
Thanks
KhanhThe scheduled task carries out post-processing activities on the users imported through the bulk load utility.
-
How to Map a .txt File To Process Scheduler Output In Peoplesoft
Hi,
My Requirement is to map the Output file (*.txt ) to the report repository (Log/Trace).
Please let me know if this is possible in PeopleSoft.yes, we can. check the below.
1. make sure the Peopletools, process scheduler, system settings, distribution file options - has system file or display checked on.
2. make sure the orperator used to run the AE on the batch server machine has the full access to move, delete the directories and files are creating
through the AE. -
Process scheduler server list is not populating in SERVER LIST page.
Need urgent help.
We have PeopleSoft Campus Solution 8.52,9.0 application. We had two Process Scheduler server one in Linux and one in NT. There was one issue that all the jobs which processed were getting into success and reports were also posted,however it was not updating the database with data. In order to solve it I created a new Process Scheduler server at onther NT machine. This time when I navigated to Process Monitor --> Server List pages it has no data there. I ran COBOL job but it went to successful and report posetd but nothing was updated into the database.
Please help me out of this situation.
Thanks
VikrantThanks a lot RCC for your response.
There is actually three issues
1)Process Monitor Server List page has no data.
2)As I go to run a process in the system process request I see that the Server Name,Reccurence,Type and Format are not workin or they are disabled.
3)Cobol jobs which I am running through PSNT is not updating database,however the Process is getting successful and reports are having posted status,but when I go to see Reports it is not having any output file its blank.I tried to check the reports at webserver,there were also no reports were published,However it works properly for all other Process.
For the first problem it has got resolved the solution is in this "Process Monitor Server List Not Populating With Data (Doc ID 615323.1)"( for those who face this problem in future :)).
For your query RCC, I have named same name of PSNT which was earlier in the different machine.
Please help
Thanks
Vikrant. -
Unable to start Process Scheduler
HRMS 9.1, PeopleTools 8.5.03, Oracle 11gR1, WebLogic 10.3, Windows XP Pro SP3.
I have app and web servers up and running on a single machine. I have configured a process scheduler but when I try to start it I get the following error:
CMDTUX_CAT:1685 ERROR: Application initialization failure
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initializing user error handler
Shutting down all admin and server processes...
I believe I configured it properly. What could be causing this error?
Thanks...Issue resolved. In the configuration, DBBIN was pointing to the wrong directory. Thanks
-
Hi one and all what is process scheduler in PS ?
My major question is What is the difference b/w Process Monitor and Report Manager Under Process Scheduler ??Hi,
Read this in Peoplebooks to learn more about the process scheduler.
Process Scheduler, Process Monitor and Report Manager:
http://docs.oracle.com/cd/E28394_01/pt852pbh1/eng/psbooks/tprs/book.htm?File=tprs/htm/tprs02.htm#H2001
Process Monitor
After you submit a job using the Process Scheduler Request page, use Process Monitor to review the status of scheduled or running processes. You can view all processes to see the status of any job in the queue and control processes that you initiated. Process Monitor consists of two pages: the Process List page and the Server List page.
Use the Process List page to monitor the process requests that you submit. If a process encounters an error, or if a server is down, you can find out almost immediately. You can also see what processes are queued to run in the future.
Report Manager
As part of PeopleSoft Process Scheduler, Report Manager provides several different methods of viewing reports, based on the level of access granted. For example, only users who are assigned to a Report Manager Administration role in PeopleSoft Security can delete reports from the database using the Report Manager - Administration page.
Using Report Manager, you can see all of the reports that you are authorized to view by opening your report list in a browser. Folders are provided to assist in organizing reports and reducing the size of the report lists.
This is the difference between the two.
Regards,
Wijnand -
Restarting App server and Process Scheduler
Hi all,
Can any body send me the document on how to Restart App server and Process Scheduler.
Thanks In Advance
KarthikUse the psadmin utility under $PS_HOME/appserv.
https://peoplebooks.uta.edu/PSOL/pt846books/eng/psbooks/tsvt/chapter.htm?File=tsvt/htm/tsvt03.htm%23H3005
Nicolas. -
Peoplesoft Master process scheduler PSMSTPRC
Hi,
We have PSMSTPRC active on the PSUNX server in prod, i noticed that the psmstprc service is active on the Unix server
Prog Name Queue Name Grp Name ID RqDone Load Done Current Service--------- ---------- -------- -- ------ --------- ---------------
BBL 45761 skpkpsf+ 0 53981 2699050 ( IDLE )
PSMONITORSRV MONITOR MONITOR 1 0 0 ( IDLE )
PSPRCSRV SCHEDQ BASE 101 0 0 ( IDLE )
**PSMSTPRC MSTRSCHQ BASE 102 0 0 ( IDLE )**
PSDSTSRV DSTQ BASE 103 24596 1229800 ( IDLE )
whereas while i checked the PIA online - process monitor - server list - It says N for PSUNX as MASTER.....
I can reboot the process scheduler to fix the issue for now... but would like to understand if someone else has come across this and why does it happen
Peoplesoft - 8.50.09 / DB oracle - 11.1.0.7 / tux - 10.3.0.0 / OS - AIX ...
Please revert thanks....how many prcs do u have.
lets say, u have 3 process schedulers. one on unix and two on windows. all 3 are configured to be master schedulers. master scheduler shows "Y" to the one which ever comes online first. rest are backup master schedulers. in case your first MS drops, second in line MS becomes "Y"
Say u have only one scheduler, this shows either your config has been corrupted.check ur OS if this is certified platform for all the products installed.
try to delete the scheduler completely and redo the scheduler from scratch. do not copy anything from the previous files.
Thanks
Maybe you are looking for
-
Can you access UK itunes purchases in Australia?
I want to gift a tv show available from the UK itunes store to another UK itunes account. The recipient is temporarily in Australia. Will he be able to download the gifts by logging into his account down under? Many thanks, Mike
-
How do I reset macbook pro with downloaded OSX lion
Hi everyone, I own a Macbook Pro 2.3GHz core I5. I have just downloaded OSX lion from the app store but I would like to completely reset my macbook. I have the installation CD's but I was wondering if I could redownload OSX lion without having to pay
-
i can't play my purshed music. if i click on one of the songs there stands url not found can you help me.
-
U330 wireless and bluetooth drivers for windows xp. devices not working. drivers already installed
so i did a fresh instal of windows xp pro sp3. device manager shows yellow question mark and ! for Network Controller and BCM2046 Bluetooth Device. i have tried using lan to windows update, update drivers, but device manager cannot find anything. i
-
personal custody in MM some of the employees take materials as a custody to use and after that return it back to the compan...