Square pixels final cut pro and dvd production help

i know this is not the normal/prescribed way to do this.
i have some QT files that have been output from various programs at at 720 by 480 with square pixels.
I would like to use FCP to edit and out put the files to DVDs that can be played on computer screens and standard tvs. (i realize i may need two different output settings and two sets of DVDs.)
is this possible and what are the best sequence and audio video settings to use in FCP such that when the files output from fpc are brought into DVD pro the files for the computer playback is visually square?
thank you kindly.
please only answer if you really know how to do this...

hi.
thanks for the feedback.
the are some programs like Flash that are widely used in the animation filed and that only output Square pixels. I know that Flash files have been used in broadcast work.
i am wondering if there is a output setting someone is aware of in FCP such that it would alter the dimensions in such a way that that the new files would not appear distorted. for example if you select the files in the time line and go to the motion tab and alter the aspect ratio to -12 you get something workable but with a letterbox look. I am wondering if there is another solution other that the one that you have made clear.

Similar Messages

  • Final Cut Pro 5 dvd writing help!!!!

    Hello, I'm new to Final Cut Pro
    I've finished my project, I now need to write it to a dvd as I need to present it at University.
    I can't figure out how to write it to a dvd so that it works in my dvd player.
    Please help.

    #3 output lossless DV
    Shane's Stock Answer #3:
    To export your DV project so there is no loss in quality, simply go to the File Menu and select EXPORT>QUICKTIME MOVIE. Not Quicktime Conversion, fot this will compress the footage. Make sure the settings match your timeline settings, make it self contained and you are set.
    Open iDVD. Create a nifty menu. Import the video. Burn the disk.
    "There's no need to fear, UNDERDOG is here!"

  • Final Cut Pro and dvd burning....

    in order to burn a fcp project that is 95 minutes long on dvd (the burner software i have is Toaster) what is the best settings for me to use, on Final Cut and the burner in order to get the best image?
    thanks very much ~
    Kyle

    I am deeply unqualified to answer your question except that I too am new to FCP and have had to face this issue -and have been hleped by this forum.
    In my first attempts to burn a 90 min movie to disc I was thwarted by the fact that the compressed movie took up too much space - a fact that only seems to be revealed at the very end of the process, frustratingly.
    Now I take my sequence with in and out points and chapter markers already in place, and go File Export in Quicktime - make sure you select Video only (and chapter markers if applicable). Convert to a QT movie which is quicker if you don't make the movie self contained.
    Then go to compressor which seems to open the appropriate source media. In the setting column click the little pop up and choose DVD Best Quality 90 mins (or whatever) and choose the dolby 2.0.
    This will save quite a lot of space on the audio side and may well allow you to get the full movie on - it has worked for me up to now. Once in DVD-SP you import the two files and combine them together on the timeline.
    This is massively quicker than compressing the video file in Compressor.
    What I don't know is how I will be able to get longer programmes on and what I don't understand is how we can all record at SP quality and get 2 hours onto a stand alone DVD recorder and yet struggle to get 90 mins on using FCP. Also I don't know whether the complexity of the sequence and the number of clips affects the size of the quicktime file - I would like to know.
    You have now plumbed the depths of my ignorance but sometimes the blind can lead the blind.
    Pete Snowdon

  • Final cut pro x dvd menu with personal backgrounds and music?

    is it possible to create with Final cut pro x dvd menu with personal backgrounds and music?

    THANKS Tom!  I miss my NERO... ;-)  ... At least personal background... Can you burn the DVD then directly from final cut or do I need another program to burn...? Cheers...

  • Exporting from Final Cut Pro for DVD Studio Pro

    In the recent DVDs I've made, the quality seems lower than it has before. I don't think I've changed anything, but I was wondering what is the best format to export a clip from Final Cut Pro and the best way to encode those clips in DVD Studio Pro. Thanks for all your help!
    Erin

    The best and only format is mpeg2/m2v.
    The encoding rate for video is based on the length of the sequence in h/m/s.
    They should not be encoded in DVDSP, but exported as a self contained with current settings, no recompression and dropped into Compressor.
    Based on length and the type of footage, elect a preset for video and elect Dolby 2 for audio

  • Final cut pro and compressor

    I have a FCP project that I have been working on for a year and have made DVD's from through compressor. Suddenly when I open compressor it states that there are no files associated with this project.
    Another user suggested I trash the preferences, but am loath to do this incase it makes things worse as I'm not very clued up on some of the systems functions.
    Please help
    CB

    If you've been on the project for more than a year, it must be legacy Final Cut Pro and not FCP X.
    This is the FCP X forum - you should ask this question in the Final Cut Studio forum:
    https://discussions.apple.com/community/professional_applications/final_cut_stud io
    Andy

  • Does CC 2014 eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422?

    Hello:
    Just today, I was working on a Mac system that does not have any of the applications that I would have expected to need to have installed in order to do more than just decompress movie files compressed with Apple ProRes 422.
    I was expecting to have to install Final Cut Studio 3, Final Cut Pro X, Compressor 4, and/or QuickTime 7 with the QuickTime Pro key; however, none of those applications are installed and I am able to create custom QuickTime Apple Pro Res422 Sequences in Premiere Pro as well as export using Apple ProRes 422.  After Effects and Adobe Media Encoder also show all the Apple ProRes variations.
    Does CC 2014 eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422?  Is it something happening on the OS or QuickTime level that would affect CC or CS6 in the same way?
    I've done a web search, but haven't really come up with anything other than older articles about needing to have FCP installed (and I typically work on systems with Final Cut Studio 3 installed as well as CS6, CC, or CC 2014).  If more detailed information is available, it would be great to be able to read up on it.
    The system is a 21.5-inch iMac running Mac OS X 10.8.5, QuickTime Player 10.2, and Adobe Premiere Pro CC 2014 (8.0.0 - I know an update is available for PrPro, but it's not my system to make that change).
    Thanks in advance,
    Warren Heaton

    Hi Emil:
    I use ProRes all the time as well, but I have Final Cut Studio on my workstations.
    I had not come across MindPower009's YouTube video.  That explains how ProRes could be showing up without FCP or Compressor.
    So, the answer to my question would be, "No, CC 2014 does not eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422; however, if you are willing to be in violation Apple's terms of use, you can install the ProRes codecs anyway."
    Even though MindPower009's YouTube video comments claim "FREE and LEGAL", it's clear from both the Apple download page and the ProRes codecs installer that Apple expects you to own at least one of their applications.
    Thanks again for the link!
    -Warren

  • When you "Send Movie to Final Cut Pro" and you cancel Rendering and how

    I am moving from iMovie to Final Cut Pro and have multiple movies to send to Final Cut Pro. I would like to cancel the rendering in FCP until I actuall need it.

    Uncheck Background Render:
    Al

  • I have recently downloaded final cut pro and i'm unable to access cinema tools. I understood this would be a free addition when purchasing FCPX?

    i have recently downloaded final cut pro and i'm unable to access cinema tools. I understood this would be a free addition when purchasing FCPX?

    Thanks for responding Tom. Yes I was trying to conform frame rates, I found a few threads/youtube tutorials that all used cinema tools. Now I've spent some time in FCPX I can see where you can conform.
    Appreciate your help.

  • Student Help advice! what is best iMac model for Final Cut Pro and logic pro

    Hi
    I am currently looking into getting a iMac, but is toggling to device if I need a 27inch or a 21inch(top model),which will be used for Final Cut Pro and logic
    There is a lot of money being invested iMac, and I really not want to be stu k with a computer that not going to keep up with the amount of work load in the future.
    The specs that I have on mine are..
    21inch 
    Upgrades include
    Sdd drive 512gb
    Intel core i7
    16gb of ram
    Or
    27 inch
    Upgrades
    Fusion drive or sdd 250gb
    Intel core i7
    (Possible graphic card) NVIDIA GeForce GTX 680MX 2GB GDDR5 [+ £105.60]
    (Ram is way to expensive so will buy from second party)
    Anyone who has brought a iMac for final cut or logic what would you likely buy?..Am really stuck on the hard drives between the 27inch fusion and 512gb on the 21inch
    My budget is £1900
    My fear is that the 21inch top model's graphic card may not be good enough for advance editing on Final Cut Pro In the future when I start to get more deep into editing..logic really only needs 8gb to run smoothly..buts its the final cut specs that am having problems deciding. I know iMacs are not future proof or technology lasts for that matter, but I do expect to have it run good for a number of years before I upgrade again.
    If anyone can give me some advice, or even tell me about there set up they have for media work please let me know.

    All kinds of things affect system & HD performance, I can't tell you why your 4 year old Mac is slow.  Just because your old Mac is slow doesn't mean that a new iMac will be equally slow.
    You are correct about the issue with the smaller fusion drives.  It's one of the reasons I am not high on recommending them.  Everyone thinks they want power & performance but don't understand the gap between marketing and real life performance.  The 1TB fusion drive however should give you a good combination of rapid access and sizeable storage capacity.
    I have used external FW800 / 7200rpm drives for years and have never had a problem with any of them.  I consider them very reliable but admittedly I DO NOT use consumer drives like the WD MyBook that the big-box stores sell.   For the most part I assemble my own with OWC Mercury Elite enclosures.  In the past few years I have centered on WD Caviar Black and WD Scorpio Black drives.  I also have some Seagate Barracuda 7200.xx drives.  They all perform excellently and reliably.
    Pls. refer to my earlier post for what i recommended to you.

  • TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

    I have edited a movie in Final Cut Pro and the video has been smooth all the time.
    Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
    What is wrong? All the sudden.

    We need info, info, info!
    What version of FCP X?
    Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
    It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
    Try exporting a master file and see if the video is ok.
    Also, keep Activity Monitor open and see how much memory pressure you've got.

  • I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

    i have the current Mac Pro the entry level with the default configuration   and i feel lack of  performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

    256GB SSD  it shipped with will run low and one of the things to watch.
    Default memory is 12GB  also something to think about.
    D500 and FCP-X 10.1+
    http://macperformanceguide.com/index_topics.html#MacPro2013Performance
    Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

  • Can I migrate an iMovie project to final cut pro and keep the edits intact?

    can I migrate an iMovie project to final cut pro and keep the edits intact? It may be a solution to my apparently corrupted iMovie

    The manual tells ..
    http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver41812c7c
    keep in mind: just the 'plain cuts', not the eye-candy iMovie offers, wil be transfered.
    unfortunately it says ...:
    You initiate the process from within iMovie. The project file and the media used in the project are copied to your Final Cut Pro library.
    For more information, see iMovie Help.
    so, if your iM doesn't work anymore, you can not transfer.
    plus, my personal opinion!, I would start from scratch in FCPx...
    What issues in iM do you expect FCPX to solve,...?

  • How do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

    how do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

    First, did you use Setup or Migration Assistant? That can happen when coming from a PowerMac or sometimes even from another (Intel) Mac.
    Second, wait for the next version of Final Cut due very soon to ship (may have to wait for the ".1" of course to clean up any early issues.
    Final Cut Pro - Wikipedia
    There are a few apps that are better.  I think you can run multiple instances of Handbrake for one.
    I've read about and wanted to try PowerDirector 9 (Windows)
    PowerDirector 9 video software
    video editing software Wiki

  • Formatting a La Cie Rugged 1TB Esatadisk for Final Cut Pro and partitions?

    I have a brand new La Cie Rugged Xl 1TB hardisk and a La Cie Sata II Esata 34 Expresscardadapter.
    1.) How to format the drive to work best with Final Cut Pro and Prores HQ?
    2.) How many partitions is best for this 1TB disk?
    3.) Which tool to use for formatting and partitioning?

    Disk Utility's Repair Permissions only works on drives where all of the following circumstances apply:
    •The drive has a Mac OS X operating system installed.
    •The files to have their permissions repaired were placed there by the *Apple Installer* application.
    •A .pkg file or .bom folder was placed in the Library/Receipts directory by the Apple Installer application, containing permissions information pertaining to the file on the drive.
    Repair Permissions does not work on secondary drives or on files created by the user on any drive -including, but not limited to documents, video, photos and music.
    To avoid permissions issues on the drives that you will be using for video, do the following:
    •Right click the drive's icon on the Desktop or in the Finder's sidebar and choose *Get Info*.
    •Go to the bottom of the Get Info window and click the triangle next to *Sharing and Permissions* to open that section.
    •Click the lock and authenticate with an Administrator User name and password.
    •Activate the checkbox for *Ignore ownership on this volume*.
    Do not partition media drives, as already mentioned. There is absolutely no need to format a drive using anything other than Apple's Disk Utility application. You do not need to use LaCie's proprietary software to format a drive.

Maybe you are looking for