Square symbols showing in portal

I am using BEA portal 9.2 for English/Arabic portal. Some of the Arabic letters are displayed as square symbols on the portal. During edit time of the arabic contents (Articles, News, Ads) everything looks good, but when presented in the portal I am getting square symbols in random Arabic letters. The content is stored and presented using UTF-8 decoding. when I uploaded the content using windows-1256 encoding, the square symbols disappeared from the portal. I need to use UTF-8 for lots of reasons. but until now I wasn't able to solve it.
Anybody has any idea why could this be happening? please help
Edited by zaitozatar at 07/23/2007 11:26 PM
Edited by zaitozatar at 07/24/2007 12:32 AM

Hi
a. Save the html from the browser and using any binary editor, check the binary codes of the character, if they are correct then the problem is with display , otherwise the problem is with the way you have stored it
b. If the binary characters are properly encoded in UTF-8 for arabic then check which font is being used on the browser. Is the font capable of displaying arabic characters? Is the language set to arabic in the html? Is the Content-Language response header set?
regards
deepak

Similar Messages

  • How can I get a picture to go with my email signature when sending emails from my iPad? Only a square box shows up on my signature not the actual picture I iploaded in my settings.

    How can I get a picture to go with my email signature when sending emails from my iPad? Only a square box shows up on my signature not the actual picture I iploaded in my settings.

    Only Apple Account Security could help at this point. You can try calling Apple Support in Canada - you'll have to find one of the several ways, such as Skype, to call an 800 number from outside of the relevant country - and ask for Account Security and see if they can help. Or you can find a friend who speaks Chinese and ask them to help you talk to Apple Support in China. There are really no other options that I know of.
    Note, by the way, that these are user-to-user support forums. You aren't speaking with Apple when you post here.
    Regards.

  • So my i just dropped my iPad and now it won't start up. It just keeps turning on and off. Like the apple symbol shows up and then goes away? What happened and is there a way to fix it. I tried restoring and that didn't work

    I pretty much stated it in my question. I dropped my iPad and now it won't boot itself up. The apple symbol shows up, then the screen turns all black and weird looking with a strange green color at the bottom, and just turns off. It keeps doing this over and over. What happened and is there a way to fix it? I also tried connecting it to itunes and that doesn't seem to be working. It detects an ipad but can't seem to read anything else. It tells me to try and restore it but I can't. HELP!!!

    Try this. It worked for a few users after a drop.
    Turn the iPad over and give it a very HARD slap on the back. May take several slaps.
     Cheers, Tom

  • Meter squared symbol in pages for iPad

    Hey Guys,
    Does anyone know how to make the meter squared symbol in Pages for iPad? I cant find away to push the 2 up.
    Thanks
    Tom

    Thanks. In a document in Pages on my iPad, if I press the + symbol, I am given various insert options like tables, graphic boxes and 'animatable' lines, which can be adjusted. Top left says 'text' which is obviously a text box. However my friend has an arrow option next to the word 'text' which allows him to import a thin arrow which can be rotated to point in any direction in his document (useful for pointing one area of text to another.
    I don't have this option; just the 'fixed' block arrows which appear below as options. My version of Pages is the latest and my iPad is very new.
    Thanks.

  • Push button ijn appraisal showing in backend but not showing inn portal

    Hi Expert,
    I would like to ask that push button in appraisal while configuring ESS/MSS package.
    It is showing in backend, but not showing in portal.
    Request you to give your inputs to bring push button on to the portal.

    Hi,
    are you using the same user to access backend and portal?. In backend, did you try from transaction PHAP_CHANGE with that user?. If you try with transaction PHAP_ADMIN in backed you are accessing as administrator, so you cannot compare the behaviour in PHAP_ADMIN and portal.
    Regards,
    Ana

  • Less than symbol,   shows as XML value &lt ; in translate table drop down

    We are upgrading from 8.19 to 8.49. We have set up a field that has translate values of <, <=, >, >=, <> and =. We use this field as a drop down on a page and they should display as shown. For some reason, when you click the drop down, any of the choices containing the < symbol are replaced with '&lt ;. The other symbols seem to display normally. Instead of < we get "&lt ;" . Instead of <=, we get "&lt ;=" .
    Expected values in XLATITEM drop down:
    <
    <=
    <>
    =
    >
    =Actual values received in drop down:
    &lt ;
    &lt ;=
    &lt ;>
    =
    >
    =In version 8.22, the symbols showed up correctly. Anyone have any ideas?
    Thanks very much!

    Yes - we tried deleting all of the values and recreating them. If we delete the < symbol, the rest show up fine, which is strange. We've cleared cache on web server, app server and pc and that didn't help either. Any other thoughts?
    I appreciate your help!

  • The fully charged battery symbol shows up (a plug instead of a lightning bolt) when it's actually not fully charged! It also stops charging!

    The fully charged battery symbol shows up (a plug instead of a lightning bolt) when it's actually not fully charged! It also stops charging! How do I fix this?

    Did you already try to set it up "as new device" How to back up your data and set up as a new device
    If this does not work, try again, this time without using the latest backup, in case it contains corrupt data, causing your problems.

  • Chinese Symbols Showing

    When I access the Calendar app in iCloud, I noticed I have Chinese type symbols showing up adjacent to the year.  Why is this happening and how can I remove them?  Thanks!

    You're welcome.  I'm not sure why except Wikipedia says "Even though the Gregorian calendar is in common and legal use, lunar and lunisolar calendars serve to determine traditional holidays in many parts of the world, including India, China, Korea, Japan, Vietnam and Nepal" (see http://en.wikipedia.org/wiki/Lunar_calendar).

  • The Caps Lock Symbol shows up automatically in the password login box

    All of a sudden this keeps happening, and I can't log on as the Administrator anymore, as I usually do.
    When I restart the computer, the Caps Lock button lights up automatically, before I touch anything.
    When I click on the ID that I want to use to log in, and type in the password, it doesn't work (presumably, because the letters are all cap, and my password is all lower case.
    If I press the caps lock button to take it off, the caps lock symbol shows up in the Password box, so my password still doesn't work.
    Any ideas on how to get rid of the automatic caps lock, when I can't even log in as Admin to make any changes?
    I've already tried re-starting; taking the battery out and restarting...

    I've figured out a way to log in as Admin, so I've solved that problem, and I've figured out that the problem is that the caps lock button is reversed somehow; when it is lit, then everything is lower case.  If I hit it to take off the light, then everything is upper case.  I'm sure there must be a way to solve that.  I'm going to check on that now.

  • Symbols show instead of text in itunes (menu items only)???

    Hi can anyone help me please? My itunes is suddenly showing square like symbols instead of text, does anyone know how to fix this please?

    Whats happened is somehow the itunes program language settings was changed from english to another language thats not installed on your PC, therefore nothing but squares show (Usually some asian language like chinese). I will try to direct you on how to change it back to english even tho you can not read it.
    1) Open itunes and at the top where you would normally see File,Edit,View ect ect. Goto the second listing from the lefthand side (This is edit) then on that menu pick the last thing at the bottom (This is preferences)
    2) Select the first tab from the lefthand side (General tab) and at the bottom where you see a dropdown menu is the Language section.
    3) Open the dropdown menu and select the 5th listing down (This is english)
    4) At the bottom righthand corner where you would normally see "OK" and "Cancel", pick the first button from the lefthand side (This is OK)
    5) Now for the language to take you need to close itunes, then reopen it

  • I cannot use my iPad. The screen is black with only the circulating dowmnloading symbol showing and I cannot switch it off to re-boot. If I try to connect to iTunes it says it could not connect because o an unknown error 0xE80000065, but I can't turn it

    I cannot use my iPad.
    It presents a black blank screen with just the circulating symbol in the middle.
    I cannot turn if off or on to re-boot it as the on-off swith does not respond, neither does the press button on the bottom edge of the pad.
    I have tried to connect it to iTunes but my computer (running Windows Vista) shows an error message 0xE8ooooo65.
    Previous to this complete shut-down I had successfully connected to iTunes and tried to download the new 4.3.3 (?) Update.
    This showed it would take four hours ! So it was left to do just that.
    However it then went back after thfour hours it said it was backing up my files, but then shutdown.
    Can anyone help?
    Shirley 

    http://support.apple.com/kb/TS3281

  • Determine Fields for Business Card on Area Page -  does not show on portal

    Hi,
    I'm trying to add new fields on the overview page of service personal data IT0002
    I found "Determine Fields for Business Card on Area Page" in customizing and added new field, but it doesn't show in ESS portal service.
    Does anyone have any advice what I need to do to make it work?
    Settings
    Infotype 0002
    Infotype Vers. 09
    Structure name: HCMT_BSP_PA_DK_R0002 / HCMT_BSP_PA_XX_R0002
    Field name   Long field label   Position
    FAMST        Marital status      4
    Br. Olof

    Bizcards is only customizable via IMG as of EHP3
    Lower releases might require additonal steps/modifications
    For EHP3 you need to ensure you are using EHP3 software components and have EHP3 business
    function switched on (be careful though switching on this function is only reversal via restore to point in time
    before switching it on) - also check note 1159911 if you  have switched this one and/or see no fields
    Worth also trying the following
    Check V_T7XSSPERBIZFLD for existing fields and positions
    Add supplementary fields and position numbers to V_T7XSSPERBIZFLD
    OR
    Check V_T7XSSPERBIZFLD for existing fields and positions
    Overwrite required positions and fields in V_T7XSSPERBIZFLC
    Best wishes
    Stuart

  • Web App not showing in Portal Preview

    We are running two web apps (Wordpress sites zebraWP and zms) under our subscription at Azure. They both show under the old management portal but only one shows in the new portal.  Reading through a previous question, I went to resources.azure.com and
    the site (zebraWP) that is not showing shows Error: 'Resource not found'
    The website otherwise appears to function normally.
    I am not sure how to correct this. I have a nice example of what should be there from the other site but am reluctant to try to edit anything myself.

    You can work around by using resources.azure.com to create the site with the same name (zebraWP).    Make sure you put the matching location and serverFarm with the origin site.   For instance, location "West US" and serverFarmName
    "DefaultServcerFarm".   See if it helps.  
    Suwatch

  • Convert spool to pdf & show in portal

    I need to display a pdf of abap spool (not OTF spool) in portal (html) .
    for this purpose i write this code below
    this code work fine for simple spools , but for other (like 101 report in HR)
    the adobe reader  return " The file is damaged and could not be repaired "
    * Convert to PDF
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
        EXPORTING
    *      src_spoolid     = spoolid
           src_spoolid     = '10455'
          no_dialog       = 'X'
          pdf_destination = ''
        IMPORTING
          pdf_bytecount = pdf_fsize
        TABLES
          pdf           = it_pdf_output
        EXCEPTIONS
          OTHERS        = 0.
    * Transfer the 132-long strings to 255-long strings
      LOOP AT it_pdf_output.
        TRANSLATE it_pdf_output USING '~'.
        CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
      ENDLOOP.
      TRANSLATE gd_buffer USING '~'.
      DO.
        pdf_table_2 = gd_buffer.
        APPEND pdf_table_2.
        SHIFT gd_buffer LEFT BY 255 PLACES.
        IF gd_buffer IS INITIAL.
          EXIT.
        ENDIF.
      ENDDO.
      CALL FUNCTION 'SCMS_BINARY_TO_FTEXT'
        EXPORTING
          input_length          = 99999999
    *   FIRST_LINE            = 0
    *   LAST_LINE             = 0
    *WRAP_LINES            = ''
       APPEND_TO_TABLE       = ''
    *   MIMETYPE              = ' '
    * IMPORTING
    *   OUTPUT_LENGTH         =
        TABLES
          binary_tab            = pdf_table_2
          ftext_tab             = pdf_table.
    (pdf_table  : type table of SOLISTI1 )
    and in the side of the portal they past the text of the pdf_table  table ,and show the pdf file
    any idea what the problem ? or there another way to show pdf of spool in portal.

    I need to display a pdf of abap spool (not OTF spool) in portal (html) .
    for this purpose i write this code below
    this code work fine for simple spools , but for other (like 101 report in HR)
    the adobe reader  return " The file is damaged and could not be repaired "
    * Convert to PDF
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
        EXPORTING
    *      src_spoolid     = spoolid
           src_spoolid     = '10455'
          no_dialog       = 'X'
          pdf_destination = ''
        IMPORTING
          pdf_bytecount = pdf_fsize
        TABLES
          pdf           = it_pdf_output
        EXCEPTIONS
          OTHERS        = 0.
    * Transfer the 132-long strings to 255-long strings
      LOOP AT it_pdf_output.
        TRANSLATE it_pdf_output USING '~'.
        CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
      ENDLOOP.
      TRANSLATE gd_buffer USING '~'.
      DO.
        pdf_table_2 = gd_buffer.
        APPEND pdf_table_2.
        SHIFT gd_buffer LEFT BY 255 PLACES.
        IF gd_buffer IS INITIAL.
          EXIT.
        ENDIF.
      ENDDO.
      CALL FUNCTION 'SCMS_BINARY_TO_FTEXT'
        EXPORTING
          input_length          = 99999999
    *   FIRST_LINE            = 0
    *   LAST_LINE             = 0
    *WRAP_LINES            = ''
       APPEND_TO_TABLE       = ''
    *   MIMETYPE              = ' '
    * IMPORTING
    *   OUTPUT_LENGTH         =
        TABLES
          binary_tab            = pdf_table_2
          ftext_tab             = pdf_table.
    (pdf_table  : type table of SOLISTI1 )
    and in the side of the portal they past the text of the pdf_table  table ,and show the pdf file
    any idea what the problem ? or there another way to show pdf of spool in portal.

  • Exporting to PDF with hyperlinks, how do I keep the squares from showing around them?

    I have a document Im creating and I have ads created in graphics, other PDFs, and text which all have hyperlinks in them that I want to be clickable.  the JPGs with them, I put an invisible square over the link and assigned the link.  For most of the PDFs I got, the hyperlinks were already clickable.  When I export the final document to PDF, all those links are carried over just how I like, and no squares are shown over those links...perfect.  For all the typed text that has hyperlinks, those show a square going around those links.  Its VERY ugly!  How do I keep it from doing that and keep everything clickable that needs to be?

    The following simple Javascript should set all of  document's hyperlinks to "invisible rectangle":
           var myHyperlinks = app.activeDocument.hyperlinks.everyItem().getElements();
    for (i = myHyperlinks.length - 1; i >= 0; i--){
           myHyperlinks[i].visible = false;
    (save it as "HyperlinksInvisible.jsx", or whatever, put it into the Scripts panel folder, and double-click its name in the Script Panel to run it.)

Maybe you are looking for