Squeaky HP Color LaserJet 3600n

Our office has an HP Color LaserJet 3600n and it been working great, but the last month of so, it's been starting to make a squeaky noise every time it prints something. I'm assuming it's from the rollers, but not sure what the mechanics of the machine are. Can this be resolved with WD40 or a light solvent lubricant? If so, where are the "rollers"? Otherwise, are there other options? Thanks!

Hi mbsearch,
I noticed that this post is a couple of years old. I wanted to reply since there are several hundred views.
There are many rollers and gears within the LaserJet. Figuring out and knowing which roller it is would be a difficult task. Using a product like WD40 or other light lubricant would not be recommended as the potential negative impact of the lubricant relative to the materials would be unknown.
My recommendation would be to:
1) Print Out the Supplies Status Page and make sure that any non Cartridge supplies such as the Transfer Belt, Fuser, etc are relatively good. As they get near end of life the can start making noise. Replace anything that is getting towards the end of life.
2) You can have a support person come out and service the printer to resolve the squeak. They will have the proper lubricants and parts to resolve the issue.
Regards,
Kaz
Kazman
I am an HP Employee
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Similar Messages

Color Laserjet 3600n won't print from network

Our small office has an HP Color Laserjet 3600n that has worked great connected to the network via ethernet cable for many years. When we came in this morning it refused to work after a power outage last weekend, and print jobs would just remained trapped in the print queue with either "printer unavailable" or "printer is busy" messages. No error messages appearred on the printer, and it prints fine from an attached USB cable. I verified the network cables, and am even able to access the printer's web interface a-ok via it's web address. It normally operated on all the default settings, I believe, and I can't figure out what else could be the problem other than a hardware fault. Any clues? We have a bunch of toner cartridges and would hate to have to buy a new unit now.

Hi,
Please follow in the link below :
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Windows 7 and HP Color LaserJet 3600N

HP does it best again. No Windows 7 driver for Color LaserJet 3600n! You can fill in the blanks... However, using Windows 7 Professional, I was able to install the XP drivers. Download the XP software and it will run in a virtual XP session. I then added the printer as Windows 7 would lead you to do. The add did not complete correctly--CTRL/ALT/DEL. However, the printer was added and seems to work. Maybe HP and Microsoft are pushing the more expansive Windows 7 Professional.
This question was solved.
View Solution.

XP Virtual session, not familiar with, but sure seems painful and possibly limiting vs HP doing the right thing in the first place.
FYI ... Over in the Home > Other HP Products and Technologies > Windows® 7 Beta and test forum, the lack of a driver has already been noted in the thread ...
HP Laserjet Color 3600n Driver for Windows 7
A few select remarks by various people (including myself) in the thread were ...
Is this really true and if so, for heaven's sake why?
Ridiculous.
stunned by this decision
This is unbelievable! We purchased multiple 3600n printers just barely a year ago (September, 2008). We have made the decision to upgrade our office computers to Windows 7 (from Vista) and now we find out that our practically still new printers are not compatible. I can assure you that I will NEVER purchase another HP compute or printer... EVER!!!
I was also a bit surprised.
I DON'T WANT TO HEAR BS SUPPORT RHETORIC FROM YOU GUYS ... FIX THIS. (a snip from my acidic entry)
HP has not responded in that forum and I just put in a support email to HP if this is poor choice of words (not supported vs we are working on it) in the
HP LaserJet, Color LaserJet and LaserJet MFP Products - Product Support for Microsoft Windows 7
link to see if it is really being worked on. Since they didn't speak up in the forum and its been since 10/5 ... plenty of time to respond, I'm stepping it up and going on the offensive.
On that Windows 7 printer support page, I counted 9 models (some of which have sub models for networking and duplexing) as not supported. I didn't count the supported ones, but must have been several hundred. What is really laughable is that the lowly LJ 2p is still supported ... aren't those circa 15 years old? Not sure if the 2p is the oldest one on the list, but it is the one I recognized as truly most ancient.
My 3600n was bought at Staples in 9/2008 and has a manufacture date on 6/2008, its not like I purchased POS laying in someone's warehouse years and got taken by some scammer.
Plain and simple ... I don't know when HP first started selling the 3600 and when they dropped, but I just don't understand how HP could do this to a product they actively sold a year ago (and there was a Vista Driver update in 11/2009) yet they support the ancient 2p ... Astonishing !!!!!!!!!!
HP the support listing (url above) for the 3600 (besides the bad news) and has a link to a trade-in program ... thinking ... oh they recogized the errors of there ways and was going to give me a good deal ... no, it was some generic trade-in page, but I ran my 3600n though the page to see what it was worth ... $25.
Feel like getting stepped on, the trade in price, that was another one which lead me to this very acidic comment in my original post ... AS FAR AS I'M CONCERNED YOUR CUTE HP TOTAL CARE LOGO IS YOU (HP) WITH YOUR HANDS AROUND OUR NECKS JUST SQUEEZING US FOR EVERY RED CENT WE MAKE IN JUST THE DAINTIEST WAYS YOU CAN (BET YOUR MARKETING PEOPLE NEVER THOUGHT OF THAT INTERPRETATION)!
I'm done being acidic, I'm just spreading the word!

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC.

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC. According to Microsoft Windows Compatibility Center website (http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...) this printer is compatible.
I have tried everythingto no avail. HP will not support and have, very little online resources addressing this particular issue. What should I do?

This may help: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02538616&lang=en&cc=us
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Envelopes won't print after W 7 upgrade - Color Laserjet 3600n and Brother HL-5370DW

I, too, cannot print envelopes after upgrading to Windows 7. Same issue with 2 printers.
Windows 7 64-bit
4gb memory
Word 2007
envelopes created using mail merge
HP Color Laserjet 3600n
Wireless
Also cannot print to Brother HL-5370DW. Wireless
When I send the envelopes to the printer, there are no errors. But the job is not actually sent to the printer.
I CAN print other documents to both printers.
I tried printing to XPS. A "Save the file as" dialog appeared. I browsed to the desktop, entered a name and clicked Save. No file appeared on the desktop.
Thank you,
Nina

You've got a double whammy there. CS2 is not universal so you're running
it under rosetta. Additionally, there are still problems with Leopard
and CS3.
Keep an eye on the Leopard threads and give serious consideration to
upgrading.
Bob

Installed HP Color Laserjet 3600n software but does not show in model list

Recently installed the HP software for my Color Laserjet 3600n on my MAc OS X 10.5.5 laptop. The software says it is installed successfully, but when I try to set it up for printing via IP address, it says the ip address is valid, but at the bottom, iwhen I choose select drivers, my model does not show in the list.
Any thoughts?

What IP printing protocol did you try, and what does it say to use in the manual?
Since it's not a postscript printer, I wonder if it uses More Printers > HP IP? (instead of IP printer)

Got HP color laserjet 3600n working on sl

Originally was attempting to print through airport with our HP color laserjet 3600 connected to airport via USB. This was working until we installed snow leopard - then we couldn't print.
Solution: We have an Airport Extreme G that has 2 ethernet ports, one of which can be used for a printer. We connected the 3600 to the ethernet port on airport and added the printer using the IP address and it works with all of or computers now - some with 10.5 on them and some with 10.6 on them. You can also add the printer using the ethernet port and a bonjour driver.
Hope this helps someone out there.

ok... so i found a solution that got the 3600n running. i actually found it in an HP forum (http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId= 1018527&admit=-682735245118090418665928353475). the solution was this:
I had problems with that also. While I found the documentation to be unclear, I did eventually get it to work with a macbook OSX 10.4.8 and a HP color laserjet 3600n connected across a network.
My first thought was to add it as an "IP printer", after all it's on the network and has an ip, right? That didn't work, it just printed out lots of garbage.
I then tried several things, including reinstalling the HP software twice. What finally did the trick was to:
1. go to utilities/printer setup utility
2. click add - note the printer does not show up
3. click more printers, and on the window that comes up:
4. select HP IP Printing - note the printer still does not show up
5. click manual
6. enter the ip address for the printer
7. click connect
then it automatically sees the printer as a "HP Color LaserJet 3600", adds in in, and I can print to it fine.
Note: it never, in any of the menus I looked at gave me the option to select a HP 3600n, and it wouldn't see it automatically. So not the expected "just works" experience I was looking for from the Mac, but it works now, which is good, I was begining to fear I had bought the wrong printer.
20" Core 2 Duo Mac OS X (10.4.9) i have tons of peripherals

Why aren't there Windows 7 (64 bit) specific drivers for my HP color LaserJet 3600n printer?

Why doesn't HP support its own printers by providing drivers for a very stable operating system? I've been a longtime HP laser customer...since 1984 laser I. I would like to use drivers for my color LJet 3600n which were specifically written for my computer's operating system.
Does anyone know where there are Windows 7 (64 bit) drivers for the HP color LaserJet 3600n printer? Do I have to purchase Brother or Canon or Lexmark printers to get support?

Oh, you must not be on the English US site. Basically it says to use the Vista driver and gives a link to it. That is as good as it gets at this point, sorry.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Yosemite and hp printer color laserjet 3600n hp office jet 8600 pro

Hi,
I have upgraded maverick to yosemite. The last Update for printer software was installed (version 3.0 at Oct. 1 2014). But both printers doesn not work any more.
The color laser jet 3600n stops after 10% of the print with PCL XL error, Subsystem kernel, Error: Missing data, Operator: Vendor Unique, Position 14.
With the OfficeJet 8600 Pro it is quite similar. The printer starts loadin the page. After some minutes the printer push out the empty page. In both cases the Mac lost connection to the printer for some time. After few minutes the connection is established.
System is OSX Yosemite 10.10
Color LaserJet 3600 driver version 2.0.3,
connected over cable / bonjour
serial number [Personal Information Removed]
procuct number Q5987A
OfficeJet Pro 8600 N911a
connected wireless/Bonjour
FW-version CLP1CN1322CR
serial number [Personal Information Removed]
driver version HP Officejet Pro 8600 2.0
product number CM749A
All device informations from the HP utility software.
This question was solved.
View Solution.

Hello @esuny , and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial LaserJet Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I cannot download a new driver to my HP Color LaserJet 3600n printer (I'm using Windows 7) - help

any help appriciated

@vincepay
Here is a link to the drivers for the HP Colour LaserJet 3600 windows 7 drivers:
HP Color LaserJet 3600 Series Printers World Wide Printing System - 64 bit driver for windows 7
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

HP COLOR LASERJET 3600N

TEMOS UMA HP COLOR LJ 3600N EM UM CLIENTE
ESTA COM O SEGUINTE PROBLEMA. O CLIENTE MANDA IMPRESSAO EM COLOR E SAI EM P/B. JA TROQUEI O DRIVER DA IMPRESSORA POR UM UNIVERSAL. O QUE ELES ESTAVAM USANDO ERA PCL E AO USAR PS GERA ERRO DE PERSONALIZAÇAO.
MESMO USANDO ESTE DRIVER UNIVERSAL ESTA VA TAMBEM GERANDO ERRO E IMPRIMINDO EM P/B. DEPOIS DE MUDAR PARA O DRIVER PS E APLICAR E VOLTANDO PARA O UNIVERSAL ELA VOLTA AO NORMAL.
O QUE PODE SER.?
PROBLEMA DE DRIVER MESMO OU NO EQUIPAMENTO.?
PODE-SE FAZER A ATUALIZAÇAO DE FIRMWARE OU NAO E RECOMENDAVEL?
GRATO

TECNICO_RECOM,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Standard paper tray on Color LaserJet 3600n

We have a Color LaserJet 3600 which had a problem with the standard paper tray being stuck. Couldn't get it out until we were able to get inside the machine and push down on the metal plate that pushes the paper up when the drawer is in the printer. After we got it out we found a small plastic piece broken on the end of the right side of the metal plate that sticks through the plastic side of the paper tray (see image). Does anyone know where I can get this plastic piece without having to purchase the entire tray?
This question was solved.
View Solution.

Typically these small pieces on the paper trays, such as this one, are unavailable by themselves. One can check the HP Parts Store to see if the parts is available, but most likely one will have to get the tray as a single unit.
Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Escape Sequences for HP Color LaserJet 3600n

I want to be able to print a file to my 3600n printer with certain text printed in color. I print from a Fedora14 box. For output to the screen, I can use the well-known VT100 terminal escape sequences to achieve colored display, in, say, red. I want to achieve the same effect with printed files.
Does the 3600n respond to escape sequences? If so, where can I find a list of these escape sequences?
TIA,
Jon

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Cannot print -- random text & blank pages when printing -- HP Color Laserjet 3600N

Apple Support Community,
I'm having some trouble connecting my computer and printer via a network connection. The printer functions fine among other computers (Mac, PC) connected via a network connection, but one particular MacBook is giving me trouble.
I can get the printer and laptop to connect, however when I try to print, it gets buggy on me. Usually it will print a page with some random text, followed by an excess amount of blank pages, then another page with text similar to the first. The text usually has information including font types and other formatting data, but not what was "printed."
I have tried to update the printer drivers, but I cannot get the printer utility to utalize them. After installing the most recent drivers, it will continue to suggest the generic laser printer drivers (1.0 verison), or I can choose other printer drivers (including "base" 3000 model drivers), but the 3600N drivers are not avalible on the list. Both the generic drivers and the HP drivers give me the random text upon printouts.
The laptop is a MacBook Pro with 10.6.
What is the best course of action to remedy the printer problem?
Thanks!
Jel.

Over the holidays, I spent a couple of hours on the phone with HP, a couple with Microsoft, and previously with Apple. Microsoft said they are working on updates, should be fixed by the release of Office 2008. Apple says there's a compatibility issue among the HP printer and Leopard and "some" programs. HP tells me it's an "old" printer (which they were happy to sell me in April 2007) and they may not release new drivers. HP also says Apple knows there are printing issues.
In the meantime, I'm using Pages and shopping for a new non-HP printer.

HP Color Laserjet 3600n printer displays Install Supplies when supplies are installed

Printer displayed message that supplies were out for all toners except magenta.
We put new black, cyan and yellow toners in the printer but it still displays INSTALL SUPPLIES with questions marks for those three toners on the display screen.
We set the printer to DISABLE CARTRIDGE CHECK mode and requested it print an event log, so the data light turned on steady without blinking and the display says it's printing the event log, but nothing happens for hours.
Took out the three toners (black, cyan and yellow) and kept the printer in DISABLE CARTRIDGE CHECK mode, then was able to print anything requested but prints only have magenta toner on them.
Put a black in the magenta toner slot, still in DISABLE CARTRIDGE CHECK mode, and print only in black where the magenta should be.
Cartridge locks are in good condition. Have cleaned all contacts in the toner slots.
Have checked all connections from DC controller and re-seated the formatter and all appear to be secure and sound.
Any advice as to whether this could be the formatter, DC controller, or something I've not guessed?

Hope you a having a great day,
I am reaching out to probe if you still experience this issue and to make a suggestion. If you are, Perhaps since this is a commercial product, posting in the forum for HP Business Support will provide a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If you are not experiencing this issue any longer you may disregard this post, although I will appreciate if you can take I little bit of your time and let me know.
Best of luck;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Squeaky HP Color LaserJet 3600n

Similar Messages

Maybe you are looking for