SQVI Creation Date and Last Run

Good afternoon,
I am trying to find out when a user last created report via SQVI and also last used them.
Can someone give me direction as I am not sure where to find the info either via tables or SQVI/SQ01.
Thank you
Coco

Try the Function modules starting with RSAQ* - you might find some answers there

Similar Messages

Payment Program Creation Date and User (is this in any table in SAP R/3)?

Dear Experts!
The treasury guy asked me whether there would be a way to recover the "Payment Program" Creation Date and Created by (User) from Payment Program Executions (F110 transaction).
I searched on the REGU* tables and I didn't find out this information.
Does anybody know whether there is any table where this is recorded?
NOTE: We cannot use the information from "Proposal Log" because the log is removed from the Productive System and only the last 3 (three) days are remaining.
Thanks and Kind Regards,
Daniel Carvalho.

Hello "The Wirtschaftsmann",
Thanks for the reply. However, I need the Creation Date and Creation by of the Proposal / Payment Run steps.
Not sure if this information is available nowadays at SAP. I opened an incident with SAP, let's see what they reply to us.
Regards,
Daniel

Automator- create file names with creation date and time

I have photo files that I want to rename with a base name, plus a sequential number, based on the creation date (and ideally time). It appears that Automator does not honor the time of the source file when date stamping a new set of files. If there is anyway to use date + time so I can recreate a date_timestamp in addition to a base filename, that would be great.

Hi Nikhil_BI_Dev,
According to your description, you find your report runs properly in BIDS but shows blank after deploying onto report server. Right?
In this scenario, it might be the issue on retrieving data in SQL 2005. Here is a thread with same issue, please refer to the link below:
Detail report is blank after deploying
Reference:
Using SQL Server 2005 Reporting Services with SQL Server 2005 Express Edition
If you have any question, please feel fee to ask.
Best Regards,
Simon Hou

Date of last run of any program

Hi Experts,
Can anyone please provide how to fetch Date of last run of any program.
I tried for transaction STAD/STAT,did not get desired Results.
Any table name / FM in this regard will be helpfull.
Thanks in Advance.
Regards
Ullas

Hi Ullas,
Not sure of table/FM. But i can give a pointer.
Create one Ztable with mandt, date and time. Only mandt is key here.
In ur program once u finish all selection screen validations just query this Ztable.
SELECT single * INTO wa.
Here u can get the date and time.(First time there won't be any record).
In the last statement update this table with current date and time.
wa-date = sy-datum.
wa-time = sy-uzeit.
MODIFY ztable from wa.
Why i am asking to do it in last is ur program may fail in between. So if it reaches till the end of execution where there are no more statements to be executed MODIFY the ztable.
So at any point of time u can get the successful execution date and time of the report from this table for the given client.
If u don't want to happen at client level then u can remove the mandt field from table.
Hope this may be helpful.
Thanks,
Vinod.

How to List Sales Orders based on Creation Date and Delivery Priority

Dear all,
How can we list Sales Orders based on creation date and delivery priority.
I tried using vl10a transaction code, but there we can see sales order based on delivery date.
we need to list all sales order based on delivery priority and sales order creation date.
can any one of you tell me which standard report gives such kind of report. Your suggestions will be highly appreciated.
Thank you
Raghu Ram

Hi Raghu,
There is no st report available as per your req.
Using SQVI, you develope one report that is list of sales orders based on your req.
SQVI is used to convert a Quick View into a query.
Quick Viewer:
The Quick Viewer allows you to define reports without having to program yourself. The Quick
Viewer is especially useful for new users and occasional use.
Quick Viewer is a tool for generating reports. SAP Query offers the user a whole range of options for defining reports. SAP Query also supports different kinds of reports such as basic lists, statistics, and ranked lists. Quick Viewer, on the other hand, is a tool that allows even relatively inexperienced users to create basic lists.
Quick View definitions are user-dependent. You can transfer a Quick View into SAP Query in order to make reports, for example, accessible to additional users, or to use the other functions available in SAP Query.
The following is a comparison of Quick Views and queries:
Quick Views possess the same functional attributes as queries. However, only basic lists may be defined with Quick Views.
In contrast to queries, no user group assignment is necessary with Quick Views. Each user has his/her own personal list of Quick Views. Quick Views cannot be exchanged between users. Quick Views may, however, be converted to queries and then be made available to other users in a specific user group.
Info Sets are not required for Quick View definition. Whenever you define a Quick View, you can specify its data source explicitly. Tables, database views, table joins, logical databases, and even Info Sets, can all serve as data sources for a Quick View. You can only use additional tables and additional fields if you use an Info Set as a data source.
The Quick Viewer uses various controls. Certain hardware and software requirements must also be fulfilled before you can use the Quick Viewer.
To define a Quick View, you select certain fields according to your data source that determine the structure of your report. The report can be executed in basis mode with standard layout or may be edited using drag and drop and the other toolbox functions available in WYSIWYG mode.
Reports created using the Quick Viewer may also be passed to external programs (Excel, for example).
Call the Quick Viewer using System -> Services -> Quick Viewer (or transaction SQVI).
Enter the name of the Quick View. Quick View names can contain a maximum of 14 characters.
Choose Create.
Enter a title for the Quick View and remarks, if you think they are relevant.
If you do not want to base your list on a table, use the possible entries pushbutton in the Data source field to select another data source. You can choose logical databases or Info Sets. In addition, you may also create table joins. For further information, see Selecting a Data Source.
Choose Basis mode if you want to create the list directly with no list design. Choose Layout mode if you want to define the layout of your list yourself.
SQVI Table Quick viewer Used to created quick client dependent reports
Probably the easiest and most flexible way to do this is thru one of the ABAP query transactions.
Transaction SQVI can do this and it has a very good help function that explains how it works... the drawback is that it is only for one user.
You can play around with it and see if it meets your needs...
The query results will come back in an ALV Grid or Excel... you can select what fields are returned, and have a selection screen to enter the search criteria.
You can get the report by joining the tables VBAK and VBAP.
If you have any queries, i will forward screen shots to your id.
Reward points pls.
Regards,
Govind.

PO creation Date and Invoice creation Date

Hi,
Can any one help me regarding which table I can look for PO creation date and Invoice creation date. I require these fields for my reporting requirement.
Thanks in advance,
Arvind.

Thanks for your response Bala.
I got the Table which I require. I have one more question on this.
Can you tell me Invoice Creation Date is RBKP-BLDAT(Document Date in Document) or RBKP-BUDAT(Posting Date in the Document) and PO creation Date is EKKO-AEDAT(Date on which the record was created) or EKKO-BEDAT(Document Date in Document).
Points already rewarded.

Po creation date and release date during print po.

hello all,
i want to add po creation date and changed on date,po releasing date in printout of po.
is there any standard settings available for this or i have to go for abaper help?
what is the table and field for these addition.
i know CDHDR and CDPOS TABLE USED FOR CHANGE IN PO.
REGARDS
SUMIT SIMRAN

HI,
There is no logic in this requirement, as we know everything is possible through ABAP, it doesn't mean we need to address each & everything asked by business.
PO contains number of fields and it is possible that the user can change many fields, if that is the case are we going to communicate to the supplier for each & every change?, i think that is useless for supplier also.
in standard SAP we have certain fields for which any changes made then system will trigger release process if any,
or system will generate the output again.
If the output is generated immediately after the change, then the output date & time itself is a change date. no need to mention again in the print output.
As a Consultant we need to convince the user , so that our effort can be used in a better way.
Thx
Raju

Material Creation Date and Time

Hi,
Is there any place which stores the material creation date and time. We have checked table MARA, but that only has the creation date of the material, but does not give the material creation time. We have checked table CDHDR, but that only seems to have the material change date and time.
From where can we retrieve the material creation date and time.
Thanks and Regards,
John

Actually, CDHDR and CDPOS will have the value. The CDHDR record will be marked as a 'U" record but look at the corresponding CDPOS record for MARA and it will be marked as an 'I' record.

How can you determine a file creation date and know if it's been altered since the creation date

I need to know how to determine a file creation date on an ipad. If someone creates a document/note on an ipad how can you tell when it was created and if it has been altered since?

Unless you are using a third party app that provides that functionality, in iOS the only thing youcan access is the last edit/save date and time, which is fairly evident in the user interface for documents and notes. Some apps that handle MS Office files may provide that, but ican't say first hand.

How can I get the File Creation Date OR Last modification date of the incoming file in my message?

I need the Last Modification Date and the File creation date of the consumed file in my message, is it possible to do that using a custom pipeline component in decode stage or any other way? The FILE namespace have File creation time that actually gives
the time the file was dropped in receive location, not the actual creation time. Also this namespace doesn't have the Last Modification Date.

Yes,
As per MSDN, "File.FileCreationTime" - "Defines the time that the file was written to the folder that is monitored by the File receive
adapter."
So for File Modified DateTime, only option I can think of is create a custom file adapter (updating the File Adapter code from SDK ..\SDK\Samples\AdaptersDevelopment\File Adapter) and access the received file with the code something like the following, which
you give you the Last Modified date
string sLastModifiedDate = File.GetLastWriteTime(path).ToString();
If there are any business requirements which drives you this, then this the only way I can think of. Because you can access the file properties only in adapter, when it passes through adapter file is handled as stream and you will only have context properties
to access the file related properties.
If you're looking for implement this for any audit purpose or for your any technical purpose, then you can suggest some alternate than using File updated datetime.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How can we see Last Date and last quantities in Bex Analyzer ?

Hı BW Gurus,
I have a query that shows consumption quantities for a material regarding to a date interval. On initial screen i specify a material and a date interval ( 01.04.2007 - 15.04.2007 for example). Then query brings total consumptions(261 and 601 movement types) for materials. I set up the query according to stock cube.
But my client wants the last consumptions (last 601 and last 261) quantities and dates in a different columns. When we include calendar day it can be seen easily all the lines day by day. But we dont want to include calendar day. Thus for one material only one row will be exist. Report template will be like that:
On initial screen we defined april 2007 , Output:
Material         Total consump. quantity     Last Consump. Quant.   Last.Cons.Date
XYZ                         457                                 76                        18.04.2007
PS: 76 is included in 457.
How can we achieve this result?
Thank you all indeed
Evren Temiz
Message was edited by:
        Evren Temiz

Hi Evren,
What do you mean?
Regards.

First date and last date of current year

Hi
how can i get first and last date of current year, thanks for your help

hi,
use FM......... FIRST_AND_LAST_DAY_IN_YEAR_GET
DATA: first LIKE sy-datum,
      last LIKE sy-datum.
CALL FUNCTION 'FIRST_AND_LAST_DAY_IN_YEAR_GET'
EXPORTING
    i_gjahr     = '2007'
    i_periv     = '24'
IMPORTING
    e_first_day = first
    e_last_day = last.
WRITE: / 'First Date', first, '    Last Date', last.
Regards
CNU

PO creation date and info record validy price relation.

Dear Gurus,
While creating a PO, when I change the PO creation date, price in the PO will change according to the validity start date based on the PIR.I believe thats the logic right? I have a scenario, I'm facing a problem that when I change the PO creation date between 2011 and 2012 period, the price of the PO at times will not change according to the PIR validity start date. Is there any OSS note related to this issue or I'm missing out any logic?
Validity periods
Validity on        Validity to         Deletion Flag.
04.11.2011       31.12.2011              x
01.01.2012       31.12.9999

HI,
By default, the pricing conditions are dependant on PO document date.
But there are different options like, whether you want your pricing to be dependant on Delivery date of PO item or current date (sy-datum) or GR date etc.
This filed is available in 2 places: 1. Vendor master>purchasing data> Pricing Date Control
2. Info record>Purchasing data> Pr.Date Cat.
Check in these 2 places and then simulate pricing by changing the corresponding date.

Sort by Creation Date and TIME!

I need to sort hundreds of images taken by three photographers and on six different cameras. I sort by Image Date, but it keeps each photographers images together, seems to sort by DATE only, then by file name.
I have used iView Media Pro to sort this way and it is a GREAT way to organize this type of work. Is there a way to refine how Aperture 1.5.1 does this type of sort?
At this point, my option appears to be to export my final picks, then resort and rename them in iView Media Pro.

In the browser section, I clicked on the list view (control-L is the shortcut) and then clicked on the "Image Date" header, and saw all my images sorted by date AND time. Is this what you're looking for? If all the photographers shot on the same date and time, then they'd be intermingled I suppose, but if the times were separated, this should work. Give it a shot anyway.
Mark

How to find the shipping point creation Date and time

Hi All,
Could you please help to solve this issue.
Some of the users created shipping point, Now I have to find out in which date and time the shipping points were created, is there any table to find. please help me.
Regards,
Muralikrishna

hi Murali,
first define and assign shipping point in enterprise sructure in define shipping point EC07 and assign in OVXC
goto OVL2 and assign the shipping points
The following are used for the shipping point determination:
1. Shipping conditions - Proposed from CMR. The entry in VOV8 for the sales document type if there overwrites the entry in the shipping conditions mainatined in the CMR.
2. Loading group - Proposed from the material master record.
3. Plant - proposed from CMIR - if not found then CMR - if not found then MMR.
But you should first define and assign the shipping point in the "enterprise structure" otherwise you will not be able to do the shipping point determination.
IMG - logistics execution - shipping - basic shipping functions - shipping point & goods receiving point determination - assign shipping points.
Shipping point definition:
IMG - enterprise structure - definition - logistics execution - define, copy, delete, check shipping point. You have to define the shipping point here for the particular plant.
Shipping point assignment:
IMG - enterprise structure - assignment - logistics execution - assign shipping point to plant. Here select your plant and assign the shipping point to the same.
hope this helps,
cheers,
Hema.

SQVI Creation Date and Last Run

Similar Messages

Maybe you are looking for