SQVI - Not able to see all fields in a table.

Hello all,
I was not able to add few fields in a table into my report as I am not able to see those table fields in SQVI. For example T508A-RTEXT. Please let me know.

Hi,
As Tamas suggested, field RTEXT is actually a filed in text table T508S. You would have to join table T508S in your query.
For more info on text-tables, please look the below link:
[Text Tables|http://help.sap.com/saphelp_smehp1/helpdata/en/cf/21ea9e446011d189700000e8322d00/content.htm]
Thanks.
Ravi

Similar Messages

Table Maintance - Not able to see all the entrie of table

Hi All,
I have created a Z table where I have mentioned 3 key fields.
MANDT      CLNT    3
ANSVH      CHAR   2
ENDDA      DATS    8
Now when I create the multiple entry using sm30 with the key field ANSVH same and different date i amnot able to see the entry in the sm30 but in table it exists.
e.g.
in table i have 2 entrries
100   A     30.03.2009
100   A     31.03.2009
but in sm 30 i am able to see only one entry
A     30.03.2009
I have generated the table Maintainnance several times but no success.
pls help.
Regards,
Umesh Chaudhari.

Hi Siddharth Chordia,
Thanks for your all effort.
but ti have checked the points mentioned by you here.
1) you might have forgotten to check key field for date field,
              All the three fields mentioned are key fields.
MANDT     MANDT     CLNT     3     0     Client                                    KEY Initial
ANSVH     ANSVH     CHAR     2     0     Work Contract                       KEY Initial
ENDDA     ENDDA     DATS     8     0     End Date                              KEY Initial
BEGDA     BEGDA     DATS     8     0     Start Date
BETRG     BETRG     CURR     9     2     Amount
PERCT     PERCT     DEC     5     2     Percentage
ZPDPF     ZPDPF     DEC     7     3     DPF Department Production Factor
2) may be the table is inactive, if so activate the table
       Table is active.
3) may be you would have made the date field as a key field after you had created the table, in this case you will have to click on utilities menu -> database utility, then click on activate and adjust database,
Even though I created all the key fields in first place it self, I tried data base utility also.
4) once you give the entries you might have forgotten to save the entries.
Entries in the table
100   A     31.03.2009 01.01.2009     5,000.00   0.12     0.123
100   A     30.06.2009 01.01.2009     5,000.00   0.12     0.230
Entries in the SM30
A     30.06.2009     01.01.2009     5,000.00     0.12     0.230
I even tried to create the new table. but the same result.
Regards,
Umesh Chaudhari

Not able to see all the SAP tables from CR 2008

Hi All,
1)I am not able to see all the SAP database tables(DEV server) from Database expert menu in CR 2008. Only tables those start with alphabet letters upto A & B are visible. I checked the database connection>right click>options> found no filters as well.
We are using the CR 2008 trial version with SAP ECC.
2) When i am trying with Production Server of SAP ECC, I am not able to logon to the SAP from CR 2008. It is giving error message
as : LOGON FAILED : User USER1 has no RFC AUTHORIZATION for function group SYST
Please help me to resolve these. Thanks in advance.

Thank you very much ingo.
You helped me a lot.
One more question, when I am trying for SAP database connections say for ex: 10.57.410.70, again and again some times the connection is getting saved in my connections with as new versions/variants like
10.57.410.70_1 or so. How to overcome this.
Thanks in advance ingo
Badari

ODBC connection not able to see all schemas

Hi everyone,
We have noticed an unusual problem that just recently started. In our database, I have created a read-only user - only has the ability to connect to the database, and SELECT ANY TABLE. Then we have some applications (Crystal Reports and Lotus Notes Agents) that use this user to query data. The applications use an ODBC connection, and when we initially set this up, everything worked beautifully.
However, suddenly we have noticed that the ODBC connection is not able to see all of the schemas in the database. We have tested and confirmed this - using either 9.02 ODBC or 10.01, this happens with both of them. I created a couple new ODBC connections, one for each version, then I try to create a new Crystal Report, using this ODBC connection - when I connect using the read-only user, it connects just fine, but when it shows me all of the schemas available, I am only seeing about half of them (and of course not seeing the one that I really need to see).
However, when I use Microsoft Access, and try to import some External Data, and I use the same ODBC connections, then I AM seeing all of the schemas.
Has anyone ever seen anything like this? Any ideas on what I can do to troubleshoot?
Thanks,
Brad

I'm trying to get this issue figured out. Can you
tell me what you mean when you ask me to log in
directly as the same user using ODBC and query
ALL_TABLES - how would I do that?Using whatever Oracle database account you use in Crystal, log in to the database using SQL*Plus (or your favorite GUI like SQL Developer) and run a query like
SELECT owner, table_name
FROM all_tablesDoes that query show all the tables you expect, or are you missing some?
Also, you mention a parameter in the ODBC API that
controls which schemas are returned - is there any
way to see that value?An ODBC trace might show the value, I don't recall if the actual value is written out in the trace. Different front-end tools often have a place that allows you to filter out certain schemas, which is generally done by passing in a parameter to this ODBC API call. I don't know enough about your tools, though, to know where this might be.
Are there any other ODBC drivers I could try?There are plenty of third party ODBC drivers out there, but I would tend to be suprised if the ODBC driver was at fault here. You could also try patching the ODBC driver and/or Oracle client to the most recent patchsets.
Justin

Not able to see all the records thru RSA3.

Hello All,
I am checking 0VALUATION_TEXT extractor on R/3 using RSA3 Tcode.
It is showing only 3 records.
When I am loading this Text Master data through InfoPackage, the records were loaded from R/3 to PSA itself is 6.
Why I am not able to see all the records in RSA3.
Kindly Help me out in this.
Thanks,
Geetha

Hi Geetha,
Check the data, It seems loded data was 3 records for 2 languages.
In RSA3 it is showing 3 records for EN language.
Assign points if it helps...
Regards,
ARK

Users not able to see all the default reports in FDM under analysis

All,
Users in FDM are not able to see all the default reports which will be available under Analysis. I have checked the MenuNavigation and MenuNavigationItems under object maintainence in FDM which have "ALL" as the provisioning level. I am not sure where the issue is as the users still not able to see the reports. Please advise if there is something that can be done in workbench.
Regards

You can set security on Report folders in workbench. You would go to the report tab in workbench, and right click on a Folder (Cannot do it on the individual report, it has to be on the folder), and you can assign security levels to the report folder. There are some in here that default to the admin level but you can override it.
Regards
JTF

Not able to see Metadata fields when adding the fields to the rule in UCM

Not able to see Metadata fields when adding the fields to the rule even after creating them in information fields of configuration manager.It is happening for few fields only.We are using 10.1.3 version of UCM.Kindly provide a solution if any.

Dhilipan,
I am trying to setup AES at the current Customer.
You are right on LR_JP to be linked to customs code list instead of ACE and I do achieve that if I were to maintain the Custom code list by maintaining the assignment for EAR in a separate test.
I was infact trying to follow the link: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30c7015e-c191-2d10-71b9-95907dc8edd1?overridelayout=t…
On this document, if you look at page# 14 thru 17, it has the steps I described in my original note with customs code still appearing in the drop down for 'EXCPT' for EAR.
Nevertheless, I wanted to default Type = C50 when the license type for the line on the Customs declaration is 'EXCPT' but if you see the very last screen-shot below, even though the license type configuration has default value as 'C50' it did not get pulled into the line item Documents tab when I tried to pick the category as 'CUII'.
Let me know your thoughts on defaulting the data into Customs declaration for AES filing.
What I want to achieve is the following:
When License type is 'EXCPT', system should default the type as 'C50'
Should put the License type 'EXCPT' into the number field
Should put the actual License# 'ENC' into the Supplement field
Should put the ECCN # '5A002' into the Details field
Thanks,
Prashant.

I'm not able to see all the tabs words on itunes window. I think I uninstall the font on my system. How I can know wich fonts Itunes uses for install it?

I think I uninstall the font on my system. How I can know wich fonts Itunes uses for install it?
I'm using Win Vista 64b - but I try already to install all my fot library but nothing happen,, still not able to see some menu's from lists, tabs titles, etc.
I search through itune's web site and not sign of info about how can I fix this problem...
help!

It has something to do with Segoe fonts in your system.
Refer this link for solution
iTunes 10.1 Missing Text

Not able to see all the application components in BI

Hello Friends,
Basically, we should be able to see all the application components(when you select 'datasources' under 'modeling' in RSA1) in bi which contain different datasources in them, example:
App components
+Financial Accounting
+Controlling
+Sales & Distri
i am not able to view any of the above App components in BI.
Could you pls help me out ...
Thanks,
Srini

Hi,
These data sources not activated in the source system in SAP and you need to go to t-code RSA5 and activate them manually after selecting them.
I think its "Activate data source" option.
Create a TR for this if asked.
once activate you need to replaicate them in BW and then you can see if they are coming or not.
Also it is possible that you are looking at the wrong source system.
in the data source option in RSA1 look for SAP option and the right client and then see if these data sources are appearing or not.
Thanks
Ajeet

ARE YOU AWARE, THAT PROBABLY GOOGLE MAIL, GMAIL, HAS INTERFERED IN LIGHTBEAM'S PAGE SIZE ? I AM NOT ABLE TO SEE ALL THE GRAPH SIGN'S DOWN UNDER. CAN YOU RESET?

Are you aware that probably Google mail, has interfered in Lightbeam's page size ?
I am no longer able to see all the Graph Sign's in the centre of the page because they are now in majority, so almost completely, vertical down the horizontal line. ( although, Reset Zoom level is adjusted to 100% )
Can you reset the page size for me, and also the Graph Logo's back to the centre of the page again. Please.
At the same time:
My touch screen now, from my laptop, is extremely more Sensitive for Static load of my hands, resulting in trouble during the writing process, ... because, now the writing cursor, jumps away unexpected if my hand comes near to the Touch Screen.
It triggers my temper, ... Please, can You help me out here ???
Small history:
After I used the possibilities of blocking several Direct and In-directs followers of my personal Internet activities, it is Google Mail, who is in War with me now, and inside Gmail I am no longer able to sign out.
Because Gmail lay out is partly out of service.
Thank You all for your cooperation.
Jan Mink

It is possible to reset the zoom size.Have you tried [[Font size and zoom - increase the size of web pages|Firefox's zoom feature]]? This will help increase the size of web pages.
* To make things bigger, press '''Ctrl''' and '''&#43''' at the same time.
* To make things smaller, press '''Ctrl''' and '''-''' at the same time.
* To reset the size back to normal, press '''Ctrl''' and '''0''' at the same time.
You can also use the [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. add-on to change the default zoom level for all websites at once. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
'''Using NoSquint:'''
#After installing NoSquint, make sure you have the Add-on Bar displayed:
#*Right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
#Click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
#*You can experiment with sizes larger than 125%, but it's not recommended that you go higher than 150% unless you have a large high-resolution monitor.
If there are particular sites that still present a problem, feel free to post their URLs.
Please let us know if this helped you!
Thank you.

After installing GRC 5.3-SPM-Not able to see all features in configuration

Hello Experts,
We have installed GRC-5.3 Superuser Privilege Management in JAVA standalone system and when we trying to configure we are not able to see the all features in configuration tab.
We have created a user and assigned all roles starting with FF then tried login to
http://<hostname>:<port>/webdynpro/dispatcher/sap.com/grc~ffappcomp/Firefighter
I can able to login successfully and when I go into configuration tab I cannot see all features, Could you please help me out.
Thanks & Regards,
Nagaraju

Dear Nagaraju,
You may be seeing only one "Connectors" in configuration tab in SPM. If it is so, then you are not missing anything here. It is the only configuration we need to do in SPM at java side.
If it is not showing, that means you have missed some action to assign FireFIghter Role in SPM. Check it out.
Regards,
Sabita Das

Not able to see all the subject areas with BI Author and BI Consumer roes

Hi All,
Recently we have upgraded to OBIEE 11G and we have created new users and assigned groups in the new 11G.
Generally users sholud be able to see all the dashboards and subject areas with the default BI Author and BI Consumer roles.
But in our 11G system users cannot see all the subject areas with the above groups, only if we give the BI Administrator role the they can see all the subject areas and dashboards.
We cannot give BI Administrator role to all the users....Please advise.
Thanks
Praveen.

Hi,
Check the application roles of BI Author and BI Consumer, they must be having BI Author and Consumer Groups. Check the privileges for Users and Application roles in Catalog manager for Dashboards and Check the Permissions for Users and Application in RPD for subject areas. Make necessary changes, restart BI server and Presentation services. Now users should be able to see dashboards and subject areas,
If it helped mark Helpful/Correct
Regards,
OBD

Not able to see all the subject areas with BI Author and BI Consumer roles

Hi All,
Recently we have upgraded to OBIEE 11G and we have created new users and assigned groups in the new 11G.
Generally users sholud be able to see all the dashboards and subject areas with the default BI Author and BI Consumer roles.
But in our 11G system users cannot see all the subject areas with the above groups, only if we give the BI Administrator role the they can see all the subject areas and dashboards.
We cannot give BI Administrator role to all the users....Please advise.
Thanks
Praveen.

Hi,
Check the application roles of BI Author and BI Consumer, they must be having BI Author and Consumer Groups. Check the privileges for Users and Application roles in Catalog manager for Dashboards and Check the Permissions for Users and Application in RPD for subject areas. Make necessary changes, restart BI server and Presentation services. Now users should be able to see dashboards and subject areas,
If it helped mark Helpful/Correct
Regards,
OBD

Not able to see added field in datasource after transporting in quality

Hi,
I enhanced a datasource in dev.now i transported it to quality.but in quality m not able to view added field.
let me know where its going wrong.
thanks in adv.
bhavna

Replicate your datasources...and activate the transfer structure...now go to the transfer rules and bring the field for mapping.
Hope it will help.
Assign points if useful.
Regards
Gajendra

Not able to see data in the qualifier table of the main tbl , Data Manager

Hi,
I have an issue of not able to see the data of two qualified table after populating them.
It is in mdm-5.5 ps4.
When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
However unlike other qualified tables the data does not showup automatically for these two tables.
Appreciate any suggestion or feedback on this.
regards,
-reo

You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
Adhappan Thiagarajan

SQVI - Not able to see all fields in a table.

Similar Messages

Maybe you are looking for