SR3_SAP_INSTALL_MASTER error:change user/install error! on WINDOWS2003 64B
hi everyone,
When i install the systems with BS_2005_SR3_SAP_Installation_Master,SR3
After the step: choose typical/custom ,error occured:change user/install error (originally result should be "log you off"and restart the sapinst)
My operation system is Windows2003 64bit.
My jdk version is 1.4.2.13
I had to restart the install with BS_2005_SR2_SAP_Installation_Master,SR2. everything goes well !!!!!
And when i use the Solution_manager_7.0_installtion_master,which based on BS_2005_SR3,it got the same error:change user/install error.
Did anybody else have came across the same situation? I believed it is a common problem with the version SR3!
any suggest will be much appreciated!!
Thanks very much!
Peter
my os lever is windows2003 chinese
we should change the region/language from china to UK
Similar Messages
-
hi everyone,
When i install the systems with BS_2005_SR3_SAP_Installation_Master,SR3
After the step: choose typical/custom ,error occured:change user/install error (originally result should be "log you off"and restart the sapinst)
My operation system is Windows2003 64bit.
My jdk version is 1.4.2.13
I had to restart the install with BS_2005_SR2_SAP_Installation_Master,SR2. everything goes well !!!!!
And when i use the Solution_manager_7.0_installtion_master,which based on BS_2005_SR3,it got the same error:change user/install error.
Did anybody else have came across the same situation? I believed it is a common problem with the version SR3!
any suggest will be much appreciated!!
Thanks very much!
Petermy os lever is windows2003 chinese
we should change the region/language from china to UK -
Environment: Windows Server 2012, SSAS 2012 (11.0.5058)
I have two identical SSAS Servers in the same domain. The SSAS project on machine B is a copy from machine A.
On machine A I can browse the cube using a different user using the Change User button. But this doesn't work on machine B. Any suggestions where to look?
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
TwitterHi SSISJoost,
According to your description, you can browse the SQL Server Analysis Services cube in MachineA using the user IZP\bis2, the problem is that you cannot browse the same cube on MachineB using the same user, the error message is that "the username
or password is incorrect", right?
In a SSAS project, the Browser button is used to browse the deployed cube. So in your scenario, the issue can be caused by that you have only copy the project from machineA to machineB without deploy it. To avoid this issue, you can deploy this project to
ServerB. Or create an Analysis Services Project based on an existing cube on ServerA. Please refer to the link below to see the details.
https://technet.microsoft.com/en-us/library/ms365361%28v=sql.105%29.aspx?f=255&MSPPError=-2147217396
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support -
Quick Install program won't let me change user
Hi thanks ahead of time for your assistance.
I have two organizers maintained on one computer. A Z22 for my son (hand me down) and a Palm TX for me (upgraded from the original Z22 through the upgrade option). I finally added user names for syncing for the calender/contacts ect and everything was working fine until I tried to use the Quick Install program.
Quick install refuses to acknowledge any user but me so it won't install on the Z22 (though it tries and goes all the way through hotsync including having quick install remove the software from the addit menu).
I looked at his PALM folder and there is no quick install folder so I tried making a copy of it just to see.
Is there any way to add a user to quick install the help hints that you can "change users at will" but it just doesn't list his user profile as a choice in quick install though it does everywhere else.
Post relates to: Palm TXI assume this computer runs Windows XP.
How many users have Windows Logons?
Who is Logged On when you try to sync your son's Z22?
Hint: Never, ever use Switch User.
Post relates to: Palm TX -
Installed OAS 4.0.8.2.4 and configured it. Everything is working fine with listener, plsql cartridge, Java cartridge and OSSWA. But if change listener's user/group from Oracle/Dba to nobody/nobody. Listener will not start. It hangs in as follows:
========================================================================
Information: Listening on NORM port 80 address 0.0.0.0
Information: wriorProcessInit: RMProxy IOR Bootstrap Service initialized
Information: Adapter services initialized successfully
Information: The server started successfully
Server now running as process 15654
OWS-08850: Oracle Web Listener 'www' started.
Oracle Web Listener 4.0.8.2.4 Enterprise Edition - Release (Domestic)
Copyright (c) Oracle Corporation 2000. All rights reserved.
Information: Listening on NORM port 5502 address 0.0.0.0
Information: wriorProcessInit: RMProxy IOR Bootstrap Service initialized
===========================================================================
from the message above, we can see if it failed to start the "Adapter services"
If we change the user/group back to Oracle/Dba, it starts fine.
And also, we have under $ORACLE_BASE/admin, the listener ( name devl ) permission has been changed accordingly to the user/group change. We follow the instruction from OAS configuration to change user/group.
( Read access to the configuration file
Read access to all files that provide content for servicing requests
Read access to all imagemap files
Execute access to all Oracle Application Server binaries and program files that the Web Listener must execute
Write access to the log and error files
Read access to user directories )
Thanks.Thanks. After a few more days testing. We finally figure out where it went wrong. We changed user/group from node manager. ( from Oracle/dba, installer, to nobody/nobody). After that, we only changed $ORACLE_BASE/admin/ows/SITE_name/httpd-host_name/listener_name to be read and write accessed by nobody. We forgot to change owl.cfg to be read access to nobody/nobody. After we changed that. It starts fine.
Thanks again. -
Changing user login in single user mode?
Hi my computer (server10.3) is no longer booting up (stops at the blue screen just before the login).
only 2 things have changed since last time restarted
1) changed user login in in the prefs to automatic as my name
2) installed a security update
I am wondering - if I can get into single user mode - whether i can change or force the login details
thanksHi John,
You can get into single user mode by depressing <Command>-s after the chime and holding it until you're in single user mode. Once you get there, I recommend that you run the following:
/sbin/mount -uw /
/usr/sbin/diskutil repairPermissions /
Repairing permissions is the classic first thing to do when you have problems after an update. After that, if we can help it will depend on your posting the error messages that are printed to screen before the login. If they get scrolled off the screen, you should be able to get them again with the command "dmesg".
Gary
~~~~
The system was down for backups from 5am to 10am
last Saturday. -
Change User password not working in SAP ME 6.0
Hi,
In SAP ME 6.0 SP01 6.0.1.0 Counter 40, the activity "Change User Password" does not work for me or any other user.
The activity window (Netweaver) shows, but in the top it says "An error occurred - contact system administrator".
This is the output from the default trace file. Seems my user is not authorized, but where do I set this authorization?
Br,
Johan
#2.0 #2011 09 06 11:15:11:064#+0200#Error#com.sap.security.core.wd.jmxmodel.JmxModelComp#
#BC-JAS-SEC-UME#sap.com/tcsecumewduimodel#C0000AD3034800820000000100000450#9934850000000004#sap.com/tcsecumewdkit#com.sap.security.core.wd.jmxmodel.JmxModelComp#JONORD#16##380199ECD86811E088C3000000979802#ae0e9d52d86811e08e7a000000979802#ae0e9d52d86811e08e7a000000979802#0#Thread[HTTP Worker [@312363456],5,Dedicated_Application_Thread]#Plain##
public void supplyCompany(IPrivateJmxModelCompInterface.ICompanyNode node, IPrivateJmxModelCompInterface.IContextElement parentElement)
[EXCEPTION]
com.sap.engine.services.jmx.exception.JmxSecurityException: Caller JONORD not authorized, required permission missing (javax.management.MBeanPermission -\#getCompanyConceptEnabled[:SAP_J2EECluster="",j2eeType=UmeJmxServer,name=IJmxServer] invoke)
at com.sap.engine.services.jmx.auth.UmeAuthorization.checkMBeanPermission(UmeAuthorization.java:100)
at com.sap.engine.services.jmx.JmxServerFrame.checkMBeanPermission(JmxServerFrame.java:101)
at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.checkMBeanPermission(MBeanServerSecurityWrapper.java:438)
at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:288)
at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:813)
at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:367)
at com.sap.security.core.jmx._gen.IJmxServer$Impl.getCompanyConceptEnabled(IJmxServer.java:1415)
at com.sap.security.core.wd.jmxmodel.JmxModelCompInterface.supplyCompany(JmxModelCompInterface.java:1498)
at com.sap.security.core.wd.jmxmodel.wdp.InternalJmxModelCompInterface.supplyCompany(InternalJmxModelCompInterface.java:710)
at com.sap.security.core.wd.jmxmodel.wdp.IPublicJmxModelCompInterface$ICompanyNode.doSupplyElements(IPublicJmxModelCompInterface.java:4301)
at com.sap.tc.webdynpro.progmodel.context.DataNode.supplyElements(DataNode.java:110)
at com.sap.tc.webdynpro.progmodel.context.Node.getElementListAsObject(Node.java:263)
at com.sap.tc.webdynpro.progmodel.context.MappedNode.createMappedElementList(MappedNode.java:78)
at com.sap.tc.webdynpro.progmodel.context.MappedNode.supplyElements(MappedNode.java:71)
at com.sap.tc.webdynpro.progmodel.context.Node.getElementListAsObject(Node.java:263)
at com.sap.tc.webdynpro.progmodel.context.MappedNode.createMappedElementList(MappedNode.java:78)
at com.sap.tc.webdynpro.progmodel.context.MappedNode.supplyElements(MappedNode.java:71)
at com.sap.tc.webdynpro.progmodel.context.Node.getElementListAsObject(Node.java:263)
at com.sap.tc.webdynpro.progmodel.context.Node.getElements(Node.java:270)Hi,
Change User Password screen is in fact user self services screen of NW UME and to access it, user must have Manage_My_Password action. Installation and Security Guide ask to assign this action to all roles. -
I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file in that edit how to change user roles in that xml it will generate automatic id.how to do that in xml file ?
Thanks john for you are reply.
I had tried what you sad.I open shared service in that foundation project i had export shared service.after that in import-export file.In that role.csv,user.csv,group.csv.Like this file have.When i open user file added some users after i trying save in excel it shown messgse
I click yes and save the .csv file and import from share servie. i got error like this
am i doing right way john.or explain clearly -
Changing user who calls Enterprise Service dynamically
Hello all,
I'd like to call Enterprise Service as Portal logon user.
As you know Enterprise Service is implemented on ECC, it always requires ECC's user/password when I access it.
Off the top of my head I may use logon ticket, but it does not work well for Enterprise Service.
I've already done the system configuration to use logon ticket - setting profile parameters of ECC, importing client certification and so on.
What I tried:
1. Create Destination at "Web Services Configuration: WS Destination"with following parameters:
Destination Type: WSDL
URL: http://<hostname>:<port>/sap/bc/srt/xip/sap/ECC_SALESORDERCRTRC?sap-client=800&wsdl=1.1
Authentication: HTTP Authentication, Logon Ticket
2. Try to test ES at "WS Navigator"
-> When I search ES in destination which I created, the following error occurred:
Invalid Response Code: (401) Unauthorized. The requested URL was:"http://<hostname>:<port>/sap/bc/srt/xip/sap/ECC_SALESORDERCRTRC?sap-client=800&wsdl=1.1"
When I changed destination's settings as follows, testing ES at "WS Navigator" succeeded.
Authentication: HTTP Authentication, User ID/Password(Basic), apply fixed user
But I'd like to change user who calls ES dynamically, because I want to set the user who creates sales order to Portal logon user.
Could you give me any advice?
Ikuehi lkue,
Please see my weblog @ https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/7891. [original link is broken] [original link is broken] [original link is broken] When you create SM59 HTTP destination, select "send logon ticket" or "logged in user id /password" . This will automatically use logged in user id dynamically.
Hope it helps you and solves your problem.
Regards,
Arul -
Change user's short name?
Hi and thank you in advance for any assistance you may give.
I am administering a group of computers for an office of about 20 architects. There is an XServe running 10.5.8 server. One user, when her server account was set up years ago had her name misspelled (Katie instead of Katy) on her server account. This has caused a few problems.
In an attempt to resolve them I went into the Workgroup Manager, changed her account's name and added a short name which included the correct spelling. The services she accesses are file sharing and calendar, she is running 10.7.4 on an iMac.
iCal, unfortunately, when I set her account to use the new short name, does not work and gives a 403 error. Setting the account to the previous short name works fine.
I do not seem to be able to delete the old incorrect short name from her profile on the server. Is there a way to do this, and will this allow the new short name to work in iCal? Will it cause other issues?
Any replies much appreciated.Hi baobhanjex!
Here is a direct link that usually works, to the utility ChangeShortName by Dan Frakes.
Read all of the instructions carefully, and proceed cautiously, as an improper change can result in unwanted results.
Such as;
Return to Default Desktop, Apparent "Loss" of Home Directory
Mac OS X 10.3 Help: My home folder and desktop are different than before
Also, here is a KB Article on How to change user short name or home directory name.
ali b -
We have problem to create or change users
Hi All,
We have problem to create or change users we are getting error:
/GMIES/USR1VAR is not defined in the ABAP Dictionary as a table, projection view or database view.
Please let me know what needs to be done.
Thanks in advance
Thanks&Regards
ShamsHi Markus,
It was due to plugin we had problem , it was not allowing to do any changes in user master records .no one could able to do anything but then we got some correction transport request containing correction to that after importing that transport request it solved the problem.
Thanks&Regards
Shams -
I recently moved to a new MacBook Air with a physically larger hard drive. I had a coworker move over all of my software and data, and everything seems to be playing nicely. All of the current apps I have in place like Photoshop and Illustrator are working just fine.
Unfortunately when I try to download other apps in Creative Cloud it just shows Download Error. I tried reinstalling Creative Cloud, which did nothing.
I should note that when I moved to the larger machine I changed user account names. Whenever I try to use FileSync, it says it is looking for a folder in the old user account folder. This occurs even after trying to change where that folder is in the Preferences.
Additionally I have updated from Mavericks to Yosemite. I do not know what effect that had.
Any insight how to restore my ability to get downloads and updates? Or perhaps how to fix my FileSync?I think I have it resolved by uninstalling everything and running the cleaner per these instructions: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-
Crystal Reports XI Pro About 25% of DLL File attributes changed on install
Post Author: sakelly
CA Forum: Deployment
I am having problems preparing an installation of Crystal Reports XI Pro in a Sanctuary Application Controlled environment where the unique file hashes of DLLs and EXEs need to be recorded and pre-authorised before they can execute. This is because when Crystal Reports XI Pro installs it changes the content of a large number of dlls (for examples chartui.dll and CEReportSource.dll) which all have new file create and modify dates. Hence the file hashes of a previous installation which are authorised for use are different and the application fails to run.Are these changes necessary? It is quite rare to see any application change files this way (sometimes except for licensing reasons).Is there anyway of customising the install to stop the files from changing on install?Will it be safe to overwrite files that are installed with previously installed files (which have been authorised?) I've done some basic testing and it appears ok but a lot of these files are only accessed when producing reports.Thanks,Shaun KellyFurther details on Sanctuary product http://www.lumension.com/Sanctuary_AC_Endpoint_Security.jsp?rpMenuId=118466The closest to a solution I came up with was to try installing Crystal Reports XI from the cds. When the error occurs click to ignore the error and proceed with the install. After the install is finished, the installer will check for updates which gives a link to Crystal Reports XI Release 2 Service pack 4. This is a complete install file of around 1.7 GB in size. Using this install removes the old Crystal Reports XI Release 1 which is where this issue springs from, and installs Release 2 with no errors. Dll versions will change from 11 to 11_5 and the Crystal Viewer will have updated features, like their calendar no longer loads externally within a small internet explorer window, but rather it loads an internal calendar control. After you have installed the updated install file that is the Release 2 version, you can go to this link and install the Service Pack 5 update that Business Objects came out with. Try here: [http://resources.businessobjects.com/support/additional_downloads/runtime.asp#04]
-
"You are not authorized to change users in user group XY"
Hello,
I ran a report. Within that report, a BAPI is called. It's name is user_change.
That BAPI enables you to change user details like passwords and so on...
When I tried to change the user's password, an error message occured.
"You are not authorized to change users in user group XY"
The user belongs to the group XY.
After an unsuccessful pwd change, there is no SU53 file!
So how could I solve that?
Could I explicitly define for which user groups, passwords can be changed?
Any other ideas?
Thanks a lot in advance,
holgerHi Holger,
May be they might have restricted to change password. See <a href="http://www.sap-basis-abap.com/bc/restrict-role-to-unlock-lock-change-password.htm">this</a> for more details. -
I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!
The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.
Maybe you are looking for
-
I share an Apple ID at the moment. I am considering making a new one for services such as iMessage and Facetime. If I create a new Apple ID will my Apple devices (iPhone, iPod Touch) be all wiped of my content? I know music and other iTunes content i
-
How do I tune TCP SYN resend/retransmit rate for satellite?
On a satellite internet connection MacOSX (and, I believe, iPhones) have excessively aggressive SYN resend timing. The existing settings make iTunes and SSL based services (banking, email etc) unreliable and often unworkable. Plain HTTP (most web bro
-
Date range for key date in hierarchy
Dear Friends, Is there a work around for single key date restriction for time dependent hierarchy.Bcos i can only select one key date in teh report for my hierarchy so that it will take that hierarchy which falls in this date and display the result a
-
Char Set with Portuguese special characters
Hi all, it's kind of urgent. I need to create a new Output Device (SPAD transaction) with the device type ASCII. Until that, no problem, but I need this device type to allow printing special characters like Ç, ç, â, ä, º, ª, etc. Every special char i
-
Album Art not making it to iPhone 4S correctly
My Macbook Pro & PC running iTunes 11.01.12 do not transfer correct album art to my iPhone 4S. While playing music some ablum art looks like picture of a music video, or playing Snoop Dogg showing a picture of Mariah Carey