SR520 VPN Server Vista

Hi there,
we setup a VPN Server from the CCA. We used the default Security -> VPN Server path. We then exported the VPN Profile to a PCF file.
The Cisco VPN client works fine on 32bits operating systems.
How do we set this up on Vista and Windows 7? The Client installer says '64 bits not supported'
The Cisco AnyConnect VPN client has no option to import a PCF file. And the manual says it does not support IPSec/UDP.
What are we to do?
Eljakim

One more issue:
you can setup websites from the internet that can be used from the outside after logging on from the Cisco web interface, but without actually setting up the VPN.
This is a nice feature. It works fine for non-secure (http) websites. However, we also a https site on the inside with a self-signed certificate (iomega storage device). This device cannot be accessed this way.
So two questions remain (I've given up on the Mac issue):
* how do we install a new certificate for the SR520 from the CCA
* how do we get https websites to work

Similar Messages

GUI issues with VPN server / remote settings - SR520 UC540

Kinda new to the CCA world, but not new to the game. So far I am finding the limitations a bit frustrating, but here's the main issue at the moment:
Attempting to set up a simple network with a UC540 at HQ, with an SR520 at a SOHO site. I can get the remote VPN working fine, also get a VPN to the SR520 for remote administration working. Actually had everything working fine, saved the config and rebooted to test prior to shipping it to out.
However, when I go back to look at the settings, trouble starts.The remote VPN settings don't show - the CCA tells me changes have been made in the CLI (not). The display for the VPN Server also seems buggy as it will not always display the settings for the VPN itself or the networks listed under split tunnels.Changes to either VPN setup appear to bork the other.
As this is going to a site far, far away I need to be very sure that the VPN setup is solid, at least for remote access. I have a sneaking suspicion that some of the settings are shared and changes to one setup affect the other, but after going from everything working > save > reload > not working, I can't see what is wrong.
Short version - need SOHO to communicate with HQ over site-to-site VPN, with remote access from 3d location to CCA.
Any hints?

Hi,
To resolve your issue as soon as possible, please post your question on the Forefront TMG forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=Forefrontedgegeneral
Steven Lee
TechNet Community Support

Cisco 3825 as a EZ VPN Server

I have a Cisco 3825 setup as a EZ VPN Server. I can connect and authenticate to it but I can't pass traffic (at least that's what it seems like).
My internal network is 192.168.111.x and my VPN pool is 10.13.0.x. I am succesfully assigned an IP from that pool when I authenticate with the Cisco client.
Here is my Group part of my config with my domain name pulled out:
crypto isakmp client configuration group SRC
key "whatever"
dns 192.168.111.221 192.168.111.220
wins 192.168.111.221
domain domain.com
pool SDM_POOL_1
acl 106
split-dns domain.com
netmask 255.255.255.0
And here is my ACL:
access-list 106 remark VPN ACL
access-list 106 permit ip 192.168.111.0 0.0.0.255 any
access-list 106 permit icmp any any
Also, just in case it helps, the interface that I am terminating on is a loopback. My external interface has an IP that my ISP will not route so I NAT'd one of my public IP's to the Loopback.
Please let me know if you need more info and I'll be happy to give it to you.
I know I'm close, just one last thing to tweak. Thanks for all the help!

I just found this link with a quick search:
PIX/ASA 7.x: Allow Split Tunneling for VPN Clients on the ASA Configuration Example
<http://www.cisco.com/en/US/customer/products/ps6120/prod_configuration_examples_list.html>
Links for more examples:
http://www.cisco.com/en/US/customer/products/ps6120/prod_configuration_examples_list.html
Do you plan on using SSL VPN or Cisco IPSEC VPN Client? SSL VPN client can auto-deploy to any non-Vista Windows machine (does not yet support Vista to my knowledge). If remote users have Vista, you'll need to use VPN Client software installed on their machines. Also consider how you will do authentication...do you require two-factor, or pointing ASA to a Cisco Secure ACS server, or perhaps pointing to Windows Active Directory for authentication? Lots of possibilities...

Cisco sr520 VPN configuration and deployment

Hope one of the cisco genius' can help me out. I have a small business with one sr520 edge router. The network is up and running fine but I need to allow remote users to connect back to a vpn at the office in order to access user winxp Pcs using RDP remotedesktop.
I have searched the web and cisco forums and see there are quite a few vpn configurations but I found no clear setup guide for accomplishing what I understood to be pretty simple. "allow 5 outside users to connect back to the office and work as if they were sitting in the office"
Question:
1. What client software is needed on the remote client pc to connect back back to the sr520 vpn? Can I use the windows pptp vpn client or the built-in Mac client?
2. My router shows three items labeled vpn. VPN remote, VPN Server and SSL VPN...i have tweaked each of these screens but still not been able to connect an outside client. Is there a setup guide to explain the features of this router and how to use it.
3. after poking around the Cisco site for a vpn client i am wondering why do I need a support contract to use a feature of a router I just bought? Does Firmware and client software cost extra?
Thanks for any assistance you can offer...
Kevin Hall
Houston Tx

Hi,
Some users have reported that IPSecuritas works well with the Cisco Small Business routers.
http://www.lobotomo.com/products/IPSecuritas/
For the RV180 I would try to adapt the SA500 tutorial to make it work:
http://www.cisco.com/en/US/docs/security/multi_function_security/multi_function_security_appliance/sa_500/technote/note/SA500_mac_appnote.pdf
Please note that this client is not supported by Cisco. If you have questions or issues, please post here on the forum.
- Marty

VPN Server behind Time Capsule

I have a mixed environment at home, with several Macs, two Ubuntu servers and 3 Vista laptops the family uses. Recently I had the need to setup a VPN server on one of the Windows machines with standard PPTP/L2TP, nothing out of the ordinary. All my internal clients can connect to the VPN server just fine, however, I find no specific VPN passthrough option nor a port forwarding option for GRE in Time Capsule, thus, any external connection attempts have been in vain. Yes, I have tried this by dropping all firewalls, etc for a short period of time, but to no avail.
The time capsule is hooked up directly with my ADSL2+ modem, where RFC bridging is setup on the modem to allow Time Capsule to be my sole NAT devices.
Any insight into this, or has anyone else had success with this?

I did extensive testing with this last night but still managed to get nowhere (did fix another NAT-PMP on IPv6 issue I had though by enabling Tunneling on the Time Capsule -- another story but my time wasn't completely wasted ).
I'm just trying to get L2TP working personally... I think this uses ESP rather than GRE but the same principle applies. I disabled all 'Back to my Mac' services too, I felt these may be interfering with IKE/NAT traversal ports (I know it's a requirement to kill these for CISCO VPN client to work).
Which ISP are you with btw? I'm on BT.. You don't think they are the root cause in my case do you? Clutching at straws now i know.
Wonder id my AEBS functions any differently....

VPN client connect to CISCO 887 VPN Server bat they stop at router!!

Hi
my scenario is as follows
SERVER1 on lan (192.168.5.2/24)
|
|
CISCO-887 (192.168.5.4) with VPN server
|
|
INTERNET
|
|
VPN Cisco client on xp machine
My connection have public ip address assegned by ISP, after ppp login.
I've just configured (with Cisco Configuration Professional) the ADSL connection and VPN Server (Easy VPN).
All the PC on LAN surf internet and remote PC connect to VPN Cisco server via cisco VPN client.
But all remote PC after connection to Cisco VPN server don't ping SERVER1 in lan and therefore don't see SERVER1 and every other resource in LAN.
They can ping only router!!!
They are configured with Cisco VPN client (V5.0.007) with "Enabled Trasparent Tunnelling" and "IPSec over UDP NAT/PAT".
What is wrong in my attached configuration? (I've alspo tried to bind Virtual-Template1 both to unnambered Dialer0 and to Loopback0 but without luck)
Peraps ACL problem?
Building configuration...
Current configuration : 5019 bytes
! Last configuration change at 05:20:37 UTC Tue Apr 24 2012 by adm
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname gate
boot-start-marker
boot-end-marker
no logging buffered
aaa new-model
aaa authentication login default local
aaa authentication login ciscocp_vpn_xauth_ml_1 local
aaa authentication login ciscocp_vpn_xauth_ml_2 local
aaa authorization exec default local
aaa authorization network ciscocp_vpn_group_ml_1 local
aaa authorization network ciscocp_vpn_group_ml_2 local
aaa session-id common
memory-size iomem 10
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-453216506
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-453216506
revocation-check none
rsakeypair TP-self-signed-453216506
crypto pki certificate chain TP-self-signed-453216506
certificate self-signed 01
        quit
ip name-server 212.216.112.222
ip cef
no ipv6 cef
password encryption aes
license udi pid CISCO887VA-K9 sn ********
username adm privilege 15 secret 5 *****************
username user1 secret 5 ******************
controller VDSL 0
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group EXTERNALS
key 6 *********\*******
dns 192.168.5.2
wins 192.168.5.2
domain domain.local
pool SDM_POOL_1
save-password
crypto isakmp profile ciscocp-ike-profile-1
   match identity group EXTERNALS
   client authentication list ciscocp_vpn_xauth_ml_2
   isakmp authorization list ciscocp_vpn_group_ml_2
   client configuration address respond
   virtual-template 1
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac
crypto ipsec profile CiscoCP_Profile1
set transform-set ESP-3DES-SHA1
set isakmp-profile ciscocp-ike-profile-1
interface Loopback0
ip address 10.10.10.10 255.255.255.0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no atm ilmi-keepalive
interface ATM0.1 point-to-point
pvc 8/35
encapsulation aal5snap
protocol ppp dialer
dialer pool-member 1
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Virtual-Template1 type tunnel
ip unnumbered Dialer0
tunnel mode ipsec ipv4
tunnel protection ipsec profile CiscoCP_Profile1
interface Vlan1
ip address 192.168.5.4 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly in
interface Dialer0
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname ******@*******.****
ppp chap password 0 alicenewag
ppp pap sent-username ******@*******.**** password 0 *********
ip local pool SDM_POOL_1 192.168.5.20 192.168.5.50
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
ip nat inside source list 1 interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 192.168.5.0 0.0.0.255
access-list 100 remark CCP_ACL Category=4
access-list 100 permit ip 192.168.5.0 0.0.0.255 any
dialer-list 1 protocol ip permit
line con 0
line aux 0
line vty 0 4
transport input all
end

Hello,
Your pool of VPN addresses is overlapping with the interface vlan1.
Since proxy-arp is disabled on that interface, it will never work
2 solutions
1- Pool uses a different network than 192.168.5
2- Enable ip proxy-arp on interface vlan1
Cheers,
Olivier

VPN client connect to CISCO 887 VPN Server but I can't ping Local LAN

Hi
my scenario is as follows
SERVER1 on lan (192.168.1.4)
|
|
CISCO-887 (192.168.1.254)
|
|
INTERNET
|
|
VPN Cisco client on windows 7 machine
My connection have public ip address assegned by ISP, after ppp login.
I've just configured (with Cisco Configuration Professional) the ADSL connection and VPN Server (Easy VPN).
All the PC on LAN surf internet and remote PC connect to VPN Cisco server via cisco VPN client.
But all remote PC after connection to Cisco VPN server don't ping SERVER1 in lan and therefore don't see SERVER1 and every other resource in LAN. I can't even ping the gateway 192.168.1.254
I'm using Cisco VPN client (V5.0.07) with "IPSec over UDP NAT/PAT".
What is wrong in my attached configuration? (I've alspo tried to bind Virtual-Template1 both to unnambered Dialer0 and to Loopback0 but without luck)
Perhaps ACL problem?
Building configuration...
Current configuration : 4921 bytes
! Last configuration change at 14:33:06 UTC Sun Jan 26 2014 by NetasTest
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname TestLab
boot-start-marker
boot-end-marker
enable secret 4 5ioUNqNjoCPaFZIVNAyYuHFA2e9v8Ivuc7a7UlyQ3Zw
aaa new-model
aaa authentication login default local
aaa authentication login ciscocp_vpn_xauth_ml_1 local
aaa authentication login ciscocp_vpn_xauth_ml_2 local
aaa authorization exec default local
aaa authorization network ciscocp_vpn_group_ml_1 local
aaa authorization network ciscocp_vpn_group_ml_2 local
aaa session-id common
memory-size iomem 10
crypto pki trustpoint TP-self-signed-3013130599
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3013130599
revocation-check none
rsakeypair TP-self-signed-3013130599
crypto pki certificate chain TP-self-signed-3013130599
certificate self-signed 01
3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 33303133 31333035 3939301E 170D3134 30313236 31333333
35305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 30313331
33303539 3930819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100A873 940DE7B9 112D7C1E CEF53553 ED09B479 24721449 DBD6F559 1B9702B7
9087E94B 50CBB29F 6FE9C3EC A244357F 287E932F 4AB30518 08C2EAC1 1DF0C521
8D0931F7 6E7F7511 7A66FBF1 A355BB2A 26DAD318 5A5A7B0D A261EE22 1FB70FD1
C20F1073 BF055A86 D621F905 E96BD966 A4E87C95 8222F1EE C3627B9A B5963DCE
AE7F0203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
551D2304 18301680 14E37481 4AAFF252 197AC35C A6C1E8E1 E9DF5B35 27301D06
03551D0E 04160414 E374814A AFF25219 7AC35CA6 C1E8E1E9 DF5B3527 300D0609
2A864886 F70D0101 05050003 81810082 FEE61317 43C08637 F840D6F8 E8FA11D5
AA5E49D4 BA720ECB 534D1D6B 1A912547 59FED1B1 2B68296C A28F1CD7 FB697048
B7BF52B8 08827BC6 20B7EA59 E029D785 2E9E11DB 8EAF8FB4 D821C7F5 1AB39B0D
B599ECC1 F38B733A 5E46FFA8 F0920CD8 DBD0984F 2A05B7A0 478A1FC5 952B0DCC
CBB28E7A E91A090D 53DAD1A0 3F66A3
quit
no ip domain lookup
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn ***********
username ******* secret 4 5ioUNqNjoCPaFZIVNAyYuHFA2e9v8Ivuc7a7UlyQ3Zw
username ******* secret 4 Qf/16YMe96arcCpYI46YRa.3.7HcUGTBeJB3ZyRxMtE
controller VDSL 0
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group EXTERNALS
key NetasTest
dns 8.8.4.4
pool VPN-Pool
acl 120
crypto isakmp profile ciscocp-ike-profile-1
match identity group EXTERNALS
client authentication list ciscocp_vpn_xauth_ml_2
isakmp authorization list ciscocp_vpn_group_ml_2
client configuration address respond
virtual-template 1
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
mode tunnel
crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac
mode tunnel
crypto ipsec profile CiscoCP_Profile1
set transform-set ESP-3DES-SHA1
set isakmp-profile ciscocp-ike-profile-1
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no atm ilmi-keepalive
hold-queue 224 in
pvc 8/35
pppoe-client dial-pool-number 1
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Virtual-Template1 type tunnel
ip address 192.168.2.1 255.255.255.0
tunnel mode ipsec ipv4
tunnel protection ipsec profile CiscoCP_Profile1
interface Vlan1
ip address 192.168.1.254 255.255.255.0
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1452
interface Dialer0
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname ****
ppp chap password 0 *********
ppp pap sent-username ****** password 0 *******
no cdp enable
ip local pool VPN-Pool 192.168.2.210 192.168.2.215
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
ip nat inside source list 100 interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
access-list 100 remark
access-list 100 deny ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 100 remark
access-list 100 permit ip 192.168.1.0 0.0.0.255 any
access-list 120 remark
access-list 120 permit ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
line con 0
exec-timeout 5 30
password ******
no modem enable
line aux 0
line vty 0 4
password ******
transport input all
end
Best Regards,

I've updated ios to c870-advipservicesk9-mz.124-24.T8.bin and tried to ping from rv320 to 871 and vice versa. Ping stil not working.
router#sh crypto session detail
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, T - cTCP encapsulation
X - IKE Extended Authentication, F - IKE Fragmentation
Interface: Dialer0
Uptime: 00:40:37
Session status: UP-ACTIVE
Peer: 93.190.178.205 port 500 fvrf: (none) ivrf: (none)
Phase1_id: 192.168.1.100
Desc: (none)
IKE SA: local 93.190.177.103/500 remote 93.190.178.205/500 Active
Capabilities:(none) connid:2001 lifetime:07:19:22
IPSEC FLOW: permit ip 10.1.1.0/255.255.255.0 10.1.2.0/255.255.255.0
Active SAs: 4, origin: dynamic crypto map
Inbound: #pkts dec'ed 0 drop 30 life (KB/Sec) 4500544/1162
Outbound: #pkts enc'ed 5 drop 0 life (KB/Sec) 4500549/1162

VPN between ASA5505 Easy VPN Server and 881G Router as Easy VPN Client

Hello,
I have problem in VPN between ASA5505 Easy VPN Server and 881G Router as Easy VPN Client. ASA 5505 have 7.2.3 software and 881G router have 15.1 software.
881G is configured as hardware client in network exstention mode, and it is placed behind NAT. ASA5505 is working as server. Same VPN Group works correctly from VPN software clients.
When I send traffic from 881G client side, in show cryto sessin detail I see encrypted packets. But with same command I dont see decrypted packet on ASA5505 side. On both devices Phase 1 and Phase 2 are UP.
VPN is working when I replace ASA5505 with ASA5510 correctly with have 8.4.6 software. But problem is that i need to do this VPN between ASA5505 and 881G.
Can you help me, how can I debug or troubleshoot this problem ?
I am unable to update software on ASA5505 side.

Hello,
Hire is what my config look like:
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 60 set pfs
crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 80 set pfs
crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 100 set pfs
crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 120 set pfs
crypto dynamic-map outside_dyn_map 120 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 140 set pfs
crypto dynamic-map outside_dyn_map 140 set transform-set ESP-AES-128-SHA
crypto dynamic-map outside_dyn_map 160 set pfs
crypto dynamic-map outside_dyn_map 160 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 180 set pfs
crypto dynamic-map outside_dyn_map 180 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 200 set pfs
crypto dynamic-map outside_dyn_map 200 set transform-set ESP-AES-256-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 2
authentication pre-share
encryption 3des
hash sha
group 1
lifetime 86400
crypto isakmp policy 3
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
tunnel-group HW-CLIENT-GROUPR type ipsec-ra
tunnel-group HW-CLIENT-GROUP general-attributes
address-pool HW-CLIENT-GROUP-POOL
default-group-policy HW-CLIENT-GROUP
tunnel-group HW-CLIENT-GROUP ipsec-attributes
pre-shared-key *******
group-policy HW-CLIENT-GROUP internal
group-policy HW-CLIENT-GROUP attributes
password-storage enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value cisco_splitTunnelAcl
nem enable

ASA 5505 as a SSL VPN Server and Easy VPN Client at the same time?

Is it possible to configure and operate the ASA 5505 as a SSL VPN server and Easy VPN Client at the same time? We would like to configure a few of these without having to purchase additional ASA 5505 and use a 2 device method (1 SSL VPN Server and 1 Easy VPN Client). Thanks in advance.

I don't think it is possible. Following links may help you
http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008068dabe.html
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008071c428.shtml

How to setup built-in VPN server on Mountain Lion

Anyone have information on configuring the built-in VPN server in OS X Mountain Lion ?

Update - it works ! At least I can connect to Mountain Lion (not server) from my iPhone using the VPN Server Configurator app.
Here's what I did :
1) download the app and install
2) setup using the help files on the web page : http://www.greenworldsoft.com/product-vpn-server-help.html
3) at the last stage you need to setup port forwardin on your router
4) under Airport Utility 6.0 you cannot setup ports 500 or 4500 due to BTTM conflicts but setup the other 2 ports (1723 TCP and 1701 UDP), update airport extreme
5) download Airport Utility 5.6 from here : download already extracted utility it is in it's extracted form as is necessary under Mtn Lion (thanks to NetUse Monitor for the download - great app by the way)
6) run 5.6 and setup port forwarding (Advanced-Port Mapping) for the other 2 ports (500 and 4500 UDP), update airport extreme
7) that's it, I was able to connect to the VPN from my iPhone !

OSX 10.8 server Set VPN server in Local net, How to restrict the Local some IP connect to the VPN server?(noob,so need clearly)

the tittle is my question. I am noob , so I hope i can make my question clear. Now i 'd like to tell you more about my question:
My aim is to set a VPN server in Local lan, then ppl can connect to the VPN server, But I dont wanna all of the Local lan IP cant connet to it. So I neet to set a rule to restrick some local Ip to connect failure, just like banning so IP in a rule.such as: just like the "192.168.4.3~192.168.4.20 ; 192.168.7.3~192.168.7.20 " IPs can connect . the IPs which outside the rules can not do.
my step is following:
1) install server app
2)and then i set a VPN server , finally the VPN server can be connected successfully by local lan computer(PC or Mac)
3)But i found no restrict IP founction in Server app panel.
4)then i down load workgroup manager, and found nothing there about such a founction about IP restriction.
so can you tell me how to aproach my aim?
Please tell me in a clear detail,I am noob
thank you

Won't the password restrict everyone from connecting unless they know the password?
I have never worked with a VPN server, so I can't really add any suggestions. Below are links to Apple support articles, but I'm not sure they will help you:
VPN - Set up Connection
VPN - Advanced Setup
VPN - Connect
VPN - Connect Automatically

Win 8.1 running HyperV as VPN server

Hello,
I have a PC running WIN 8.1, I'm running HyperV on it (for win8phone development)
On this PC, I want to set up a VPN server. When I set up incoming connection, it says, that there's no interface for incoming connections. What shall I do so?

Hi,
As Microsoft suggest, you need add two virtual NIC, then attache the NIC to the different vSwitch, one vNIC for the internal another one for the external.
The simlar third party article:
Setup a Windows Server 2012 VPN
http://www.sysads.co.uk/2013/02/setup-windows-server-2012-vpn-part1/2/
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 8.1 VPN Server Setup - No Network softwaare to choose

Hi Everyone
Windows 8.1
Setting up an incoming VPN Server.
When I try to create a New Incoming Connection via Control Panel > Network and Sharing Center > Change adapter settings > Alt - F > New Incoming Connection.
The wizard appears so I check the User Account > Next > Check Through the Internet > Next bringing up the Allow connections to this computer window where I should be able select Networking software to be enabled and then go on
to click Allow Access button. The networking software to highlight window is blank. Using the Install... button below this window brings up the Select Network Feature Type window where I can highlight a feature (Client, Service or Protocol)
and click Add button . It returns to the Allow connections window which has not changed and nothing is added. Still blank.
How do I get the network software to be there to select?
I have done this on other machines and had no problems at all. It worked the way it should.
After I did an image and reset operating system, the VPN Server Setup worked as it should. Restored image as it is way to much work to rebuild the machine. So any ideas?
Any and all help will be appreciated.
Thanks in advance. Lowell

Hi,
Did you mean you have solved this problem by resetting Windows?
Regarding to current information, this issue can be caused by port settings or corrupted Windows components.
Please check if the VPN port 1723 has been set as allowed in both your Firewall and router settings pages.
Also, we may fix such issue by running following repair command:
NOTE: Please run these commands as administrator.
SFC /SCANNOW
dism /online /cleanup-image /restorehealth
For further help, you can upload %windir%\logs\CBS\cbs.log and %windir%\Logs\DISM\dism.log into Onedrive or similar file service and share the link here for our research.
Kate Li
TechNet Community Support

Can't connect to vpn server

I am now setting up the vpn server using mac mini with Mac OSX v 10.7 Lion Server. After setting up, I found that I can't make connection.
When I check out the console, I find that the vpnd continue assign IP address to the same client and then hungup as follows:
Is there any solution?
11/17/11 2:31:56.180 PM racoon: IKE Packet: receive success. (Responder, Main-Mode message 1).
11/17/11 2:31:56.181 PM racoon: IKE Packet: transmit success. (Responder, Main-Mode message 2).
11/17/11 2:31:56.206 PM racoon: IKE Packet: receive success. (Responder, Main-Mode message 3).
11/17/11 2:31:56.225 PM racoon: IKE Packet: transmit success. (Responder, Main-Mode message 4).
11/17/11 2:31:56.241 PM racoon: IKEv1 Phase1 AUTH: success. (Responder, Main-Mode Message 5).
11/17/11 2:31:56.241 PM racoon: IKE Packet: receive success. (Responder, Main-Mode message 5).
11/17/11 2:31:56.241 PM racoon: IKEv1 Phase1 Responder: success. (Responder, Main-Mode).
11/17/11 2:31:56.241 PM racoon: IKE Packet: transmit success. (Responder, Main-Mode message 6).
11/17/11 2:31:56.241 PM racoon: IPSec Phase1 established (Initiated by peer).
11/17/11 2:31:57.098 PM racoon: IPSec Phase2 started (Initiated by me).
11/17/11 2:31:57.098 PM racoon: IKE Packet: transmit success. (Initiator, Quick-Mode message 1).
11/17/11 2:31:57.102 PM racoon: IPSec Phase2 started (Initiated by peer).
11/17/11 2:31:57.102 PM racoon: IKE Packet: receive success. (Responder, Quick-Mode message 1).
11/17/11 2:31:57.102 PM racoon: IKE Packet: transmit success. (Responder, Quick-Mode message 2).
11/17/11 2:31:57.104 PM racoon: IKE Packet: receive success. (Responder, Quick-Mode message 3).
11/17/11 2:31:57.105 PM racoon: IKEv1 Phase2 Responder: success. (Responder, Quick-Mode).
11/17/11 2:31:57.105 PM racoon: IPSec Phase2 established (Initiated by peer).
11/17/11 2:31:57.157 PM vpnd: Incoming call... Address given to client = 137.189.141.137
11/17/11 2:31:57.157 PM com.apple.ppp.l2tp: 2011-11-17 14:31:57 CST Incoming call... Address given to client = 137.189.141.137
11/17/11 2:31:57.180 PM pppd: pppd 2.4.2 (Apple version 560.13) started by root, uid 0
11/17/11 2:31:57.181 PM pppd: L2TP incoming call in progress from '137.189.141.146'...
11/17/11 2:31:58.156 PM vpnd: Incoming call... Address given to client = 137.189.141.138
11/17/11 2:31:58.156 PM com.apple.ppp.l2tp: 2011-11-17 14:31:58 CST Incoming call... Address given to client = 137.189.141.138
11/17/11 2:31:58.177 PM pppd: pppd 2.4.2 (Apple version 560.13) started by root, uid 0
11/17/11 2:31:58.179 PM pppd: L2TP incoming call in progress from '137.189.141.146'...
11/17/11 2:31:59.156 PM vpnd: Incoming call... Address given to client = 137.189.141.139
11/17/11 2:31:59.156 PM com.apple.ppp.l2tp: 2011-11-17 14:31:59 CST Incoming call... Address given to client = 137.189.141.139
11/17/11 2:31:59.178 PM pppd: pppd 2.4.2 (Apple version 560.13) started by root, uid 0
11/17/11 2:31:59.179 PM pppd: L2TP incoming call in progress from '137.189.141.146'...
11/17/11 2:32:00.100 PM racoon: IKE Packet: transmit success. (Phase2 Retransmit).
11/17/11 2:32:00.157 PM vpnd: Incoming call... Address given to client = 137.189.141.140
11/17/11 2:32:00.157 PM com.apple.ppp.l2tp: 2011-11-17 14:32:00 CST Incoming call... Address given to client = 137.189.141.140
11/17/11 2:32:00.178 PM pppd: pppd 2.4.2 (Apple version 560.13) started by root, uid 0
11/17/11 2:32:00.180 PM pppd: L2TP incoming call in progress from '137.189.141.146'...
11/17/11 2:32:02.102 PM racoon: IKE Packet: transmit success. (Phase1 Retransmit).
11/17/11 2:32:03.103 PM racoon: IKE Packet: transmit success. (Phase2 Retransmit).
11/17/11 2:32:06.107 PM racoon: IKE Packet: transmit success. (Phase2 Retransmit).
11/17/11 2:32:09.110 PM racoon: IKEv1 Phase2: maximum retransmits. (Phase2 maximum retransmits).
11/17/11 2:32:12.114 PM racoon: IKE Packet: transmit success. (Phase1 Retransmit).
11/17/11 2:32:17.191 PM vpnd: --> Client with address = 137.189.141.137 has hungup
11/17/11 2:32:17.191 PM com.apple.ppp.l2tp: 2011-11-17 14:32:17 CST --> Client with address = 137.189.141.137 has hungup
11/17/11 2:32:18.163 PM vpnd: Incoming call... Address given to client = 137.189.141.137
11/17/11 2:32:18.163 PM com.apple.ppp.l2tp: 2011-11-17 14:32:18 CST Incoming call... Address given to client = 137.189.141.137
11/17/11 2:32:18.180 PM pppd: pppd 2.4.2 (Apple version 560.13) started by root, uid 0
11/17/11 2:32:18.184 PM pppd: L2TP incoming call in progress from '137.189.141.146'...
11/17/11 2:32:18.186 PM vpnd: --> Client with address = 137.189.141.138 has hungup
11/17/11 2:32:18.186 PM com.apple.ppp.l2tp: 2011-11-17 14:32:18 CST --> Client with address = 137.189.141.138 has hungup
11/17/11 2:32:19.163 PM vpnd: Incoming call... Address given to client = 137.189.141.138
11/17/11 2:32:19.163 PM com.apple.ppp.l2tp: 2011-11-17 14:32:19 CST Incoming call... Address given to client = 137.189.141.138
11/17/11 2:32:19.180 PM pppd: pppd 2.4.2 (Apple version 560.13) started by root, uid 0
11/17/11 2:32:19.184 PM pppd: L2TP incoming call in progress from '137.189.141.146'...
11/17/11 2:32:19.186 PM vpnd: --> Client with address = 137.189.141.139 has hungup
11/17/11 2:32:19.186 PM com.apple.ppp.l2tp: 2011-11-17 14:32:19 CST --> Client with address = 137.189.141.139 has hungup
11/17/11 2:32:20.164 PM com.apple.ppp.l2tp: 2011-11-17 14:32:20 CST Incoming call... Address given to client = 137.189.141.139
11/17/11 2:32:20.164 PM vpnd: Incoming call... Address given to client = 137.189.141.139
11/17/11 2:32:20.187 PM pppd: pppd 2.4.2 (Apple version 560.13) started by root, uid 0
11/17/11 2:32:20.188 PM vpnd: --> Client with address = 137.189.141.140 has hungup
11/17/11 2:32:20.188 PM com.apple.ppp.l2tp: 2011-11-17 14:32:20 CST --> Client with address = 137.189.141.140 has hungup
11/17/11 2:32:20.189 PM pppd: L2TP incoming call in progress from '137.189.141.146'...
11/17/11 2:32:21.164 PM vpnd: Incoming call... Address given to client = 137.189.141.140
11/17/11 2:32:21.164 PM com.apple.ppp.l2tp: 2011-11-17 14:32:21 CST Incoming call... Address given to client = 137.189.141.140
11/17/11 2:32:21.185 PM pppd: pppd 2.4.2 (Apple version 560.13) started by root, uid 0
11/17/11 2:32:21.187 PM pppd: L2TP incoming call in progress from '137.189.141.146'...
11/17/11 2:32:29.130 PM racoon: IKE Packet: transmit success. (Phase1 Retransmit).
11/17/11 2:32:38.192 PM vpnd: --> Client with address = 137.189.141.137 has hungup
11/17/11 2:32:38.192 PM com.apple.ppp.l2tp: 2011-11-17 14:32:38 CST --> Client with address = 137.189.141.137 has hungup
11/17/11 2:32:39.141 PM racoon: IKE Packet: transmit success. (Phase1 Retransmit).
11/17/11 2:32:39.172 PM vpnd: Incoming call... Address given to client = 137.189.141.137
11/17/11 2:32:39.172 PM com.apple.ppp.l2tp: 2011-11-17 14:32:39 CST Incoming call... Address given to client = 137.189.141.137
11/17/11 2:32:39.189 PM vpnd: --> Client with address = 137.189.141.138 has hungup
11/17/11 2:32:39.189 PM com.apple.ppp.l2tp: 2011-11-17 14:32:39 CST --> Client with address = 137.189.141.138 has hungup
11/17/11 2:32:39.191 PM pppd: pppd 2.4.2 (Apple version 560.13) started by root, uid 0
11/17/11 2:32:39.192 PM pppd: L2TP incoming call in progress from '137.189.141.146'...
11/17/11 2:32:40.172 PM vpnd: Incoming call... Address given to client = 137.189.141.138
11/17/11 2:32:40.172 PM com.apple.ppp.l2tp: 2011-11-17 14:32:40 CST Incoming call... Address given to client = 137.189.141.138
11/17/11 2:32:40.194 PM pppd: pppd 2.4.2 (Apple version 560.13) started by root, uid 0
11/17/11 2:32:40.197 PM pppd: L2TP incoming call in progress from '137.189.141.146'...
11/17/11 2:32:40.198 PM vpnd: --> Client with address = 137.189.141.139 has hungup
11/17/11 2:32:40.198 PM com.apple.ppp.l2tp: 2011-11-17 14:32:40 CST --> Client with address = 137.189.141.139 has hungup
11/17/11 2:32:41.173 PM vpnd: Incoming call... Address given to client = 137.189.141.139
11/17/11 2:32:41.173 PM com.apple.ppp.l2tp: 2011-11-17 14:32:41 CST Incoming call... Address given to client = 137.189.141.139
11/17/11 2:32:41.191 PM vpnd: --> Client with address = 137.189.141.140 has hungup

I have no new information to report to help you with this, but I am also seeing the same issue. The same behavior happens when connecting through my router *or* via ATT iPhone tethering.

RDP over Easy VPN Server fails, ping works

Dear experts,
What can I do to troubleshout this problem?
This is our router configuration with the Easy VPN Server enabled:
version 15.1
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
no service dhcp
hostname ####
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 6
logging buffered 51200
logging console critical
enable secret ###########################
aaa new-model
aaa authentication login local_authen local
aaa authentication login ciscocp_vpn_xauth_ml_1 local
aaa authorization exec local_author local
aaa authorization network ciscocp_vpn_group_ml_1 local
aaa session-id common
no ipv6 cef
no ip source-route
ip cef
ip dhcp excluded-address 192.168.1.1 192.168.1.29
ip dhcp excluded-address 192.168.1.59
ip dhcp excluded-address 192.168.1.99
ip dhcp excluded-address 192.168.1.182
ip dhcp excluded-address 192.168.1.192
ip dhcp excluded-address 192.168.1.193
ip dhcp excluded-address 192.168.1.198
ip dhcp excluded-address 192.168.1.238
ip dhcp excluded-address 192.168.1.240
ip dhcp excluded-address 192.168.1.243
ip dhcp excluded-address 192.168.1.245
ip dhcp excluded-address 192.168.1.215
ip dhcp excluded-address 192.168.1.122
ip dhcp excluded-address 192.168.1.33
ip dhcp excluded-address 192.168.1.10
ip dhcp excluded-address 192.168.1.11
ip dhcp excluded-address 192.168.1.201
no ip bootp server
ip dhcp-server ##########
multilink bundle-name authenticated
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-############
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-############
revocation-check none
crypto pki certificate chain TP-self-signed-############
certificate self-signed 01
        quit
license udi pid CISCO1941/K9 sn ##########
license boot module c1900 technology-package securityk9
license boot module c1900 technology-package datak9
username #### privilege 15 secret ####################.
username #### secret ####################
username #### secret ####################
username #### secret ####################
redundancy
ip tcp synwait-time 10
ip ssh time-out 60
ip ssh authentication-retries 2
crypto ctcp port 10000
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group ###########
key ##########
dns 192.168.1.4 192.168.1.6
domain ####.local
pool SDM_POOL_1
acl 102
include-local-lan
crypto isakmp profile ciscocp-ike-profile-1
   match identity group ##############
   client authentication list ciscocp_vpn_xauth_ml_1
   isakmp authorization list ciscocp_vpn_group_ml_1
   client configuration address respond
   virtual-template 1
crypto ipsec transform-set ########### esp-aes 256 esp-sha-hmac
crypto ipsec profile CiscoCP_Profile1
set transform-set ###########
set isakmp-profile ciscocp-ike-profile-1
interface Null0
no ip unreachables
interface GigabitEthernet0/0
description $ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$$ES_LAN$$ETH-LAN$$FW_INSIDE$
ip address 192.168.1.1 255.255.255.0
ip access-group 101 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
no mop enabled
interface GigabitEthernet0/1
description $FW_OUTSIDE$
ip address dhcp
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat outside
ip nat enable
ip virtual-reassembly in
duplex auto
speed auto
no mop enabled
interface Virtual-Template1 type tunnel
ip unnumbered GigabitEthernet0/0
tunnel mode ipsec ipv4
tunnel protection ipsec profile CiscoCP_Profile1
ip local pool SDM_POOL_1 192.168.2.1 192.168.2.10
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 23 interface GigabitEthernet0/1 overload
ip route 0.0.0.0 0.0.0.0 ###########
logging esm config
logging trap debugging
access-list 23 permit 192.168.1.0 0.0.0.255
access-list 23 permit 192.168.2.0 0.0.0.255
access-list 101 deny   ip any host 184.82.162.163
access-list 101 deny   ip any host 184.22.103.202
access-list 101 deny   ip any host 76.191.104.39
access-list 101 permit ip any any
access-list 102 permit tcp any any eq 3389
access-list 102 permit ip any any
access-list 102 permit icmp any any
access-list 700 permit 000d.6066.0d02   0000.0000.0000
no cdp run
snmp-server group ICT v3 priv
control-plane
banner exec ^C
Welcome ####^C
banner login ^C
Unauthorized access prohibited
##################################^C
line con 0
login authentication local_authen
transport output telnet
line aux 0
login authentication local_authen
transport output telnet
line vty 0 4
access-class 23 in
password 7 ##################
authorization exec local_author
login authentication local_authen
transport input telnet ssh
line vty 5 15
access-class 23 in
authorization exec local_author
login authentication local_authen
transport input telnet ssh
scheduler allocate 20000 1000
end

In the server debug, I see this:
*Oct 13 09:25:46.662: ISAKMP:(2013): retransmitting phase 2 CONF_XAUTH    -2020890165 ...
*Oct 13 09:25:46.662: ISAKMP (2013): incrementing error counter on node, attempt 1 of 5: retransmit phase 2
*Oct 13 09:25:46.662: ISAKMP (2013): incrementing error counter on sa, attempt 1 of 5: retransmit phase 2
*Oct 13 09:25:46.662: ISAKMP:(2013): retransmitting phase 2 -2020890165 CONF_XAUTH
*Oct 13 09:25:46.662: ISAKMP:(2013): sending packet to 109.59.232.39 my_port 500 peer_port 500 (R) CONF_XAUTH
*Oct 13 09:25:46.662: ISAKMP:(2013):Sending an IKE IPv4 Packet.
*Oct 13 09:25:49.850: ISAKMP (2013): received packet from 109.59.232.39 dport 500 sport 500 Global (R) CONF_XAUTH
*Oct 13 09:25:49.850: ISAKMP:(2013):processing transaction payload from 109.59.232.39. message ID = -2020890165
*Oct 13 09:25:49.850: ISAKMP: Config payload REPLY
*Oct 13 09:25:49.850: ISAKMP/xauth: reply attribute XAUTH_USER_NAME_V2
*Oct 13 09:25:49.850: ISAKMP/xauth: reply attribute XAUTH_USER_PASSWORD_V2
*Oct 13 09:25:49.850: ISAKMP/xauth: Expected attribute XAUTH_TYPE_V2 not received
*Oct 13 09:25:49.850: ISAKMP:(2013):peer does not do paranoid keepalives.
Is it something with the above line ?
/Jesper

SR520 VPN Server Vista

Similar Messages

Maybe you are looking for