SRA Gateway Error

Hi all,
When I try to access the Gatway from the /amconsole, I get the following error in the gateway logs.
ERROR: Unable to initialize GatewyaProfile/PlatformProfile
java.lang.RuntimeException: Bad URL - Check the url of the servlet or Application login failed
I am not sure what is wrong and where to debug. It would be really nice if somone could throw some light.
Thanks in Advance.

Similar Messages

Error Starting SRA Gateway

When I try to start my SRA Gateway I get the following error:
Error calling ListAllKnownProfiles on host1.portal.com
I am trying to start the Gateway with command:
/opt/SUNWportal/bin/psadmin start-sra-instance -u amadmin name default type gateway -f /tmp/password-file
Any thoughts?

here is part of the admin.cli logs:
[#|2009-09-24T17:14:26.270+0000|SEVERE|SJS Portal Server|debug.com.sun.portal.admin.cli.commands|ThreadID=10; ClassName=com.sun.portal.admin.cli.commands.sra.GenericSRACommand; MethodName=runCommand; |PSALI_CSPACC0006:MBeanException
javax.management.MBeanException: Exception thrown in operation StartGateway
at com.sun.jmx.mbeanserver.StandardMetaDataImpl.invoke(StandardMetaDataImpl.java:435)
at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
at com.sun.jdmk.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:203)
at com.sun.jdmk.interceptor.MBeanServerInterceptorWrapper.invoke(MBeanServerInterceptorWrapper.java:512)
at com.sun.portal.admin.server.PortalServerLoggingInterceptor.invoke(Unknown Source)
at com.sun.cacao.agent.DispatchInterceptor.invoke(DispatchInterceptor.java:763)
at com.sun.cacao.agent.auth.impl.AccessControlInterceptor.invoke(AccessControlInterceptor.java:618)
at com.sun.jdmk.JdmkMBeanServerImpl.invoke(JdmkMBeanServerImpl.java:764)
at com.sun.cacao.common.instrum.impl.InstrumDefaultForwarder.invoke(InstrumDefaultForwarder.java:106)
at javax.management.remote.generic.ServerIntermediary.handleRequest(ServerIntermediary.java:280)
at javax.management.remote.generic.ServerIntermediary$PrivilegedRequestJob.run(ServerIntermediary.java:951)
at java.security.AccessController.doPrivileged(Native Method)
at javax.management.remote.generic.ServerIntermediary$RequestHandler.handleMBSReqMessage(ServerIntermediary.java:727)
at javax.management.remote.generic.ServerIntermediary$RequestHandler.execute(ServerIntermediary.java:629)
at com.sun.jmx.remote.generic.ServerSynchroMessageConnectionImpl$RemoteJob.run(ServerSynchroMessageConnectionImpl.java:266)
at com.sun.jmx.remote.opt.util.ThreadService$ThreadServiceJob.run(ThreadService.java:208)
at com.sun.jmx.remote.opt.util.JobExecutor.run(JobExecutor.java:59)
Caused by: com.sun.portal.admin.common.PSMBeanException
at com.sun.portal.sra.admin.mbeans.SRA.StartSRAInstance(Unknown Source)
at com.sun.portal.sra.admin.mbeans.SRA.StartGateway(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.jmx.mbeanserver.StandardMetaDataImpl.invoke(StandardMetaDataImpl.java:414)

How to fix gateway error in a View Page?

I have created an override view page and I need to add a button or link which should take the user to a page in different server. I am getting gateway error. The sample code as follows. Any thougts will be helpful. Thanks in advance.
string sUrl = "<pt:gatewayLink pt:href='http://appserver/step1.asp' pt:objectID='206' pt:classID='35' xmlns:pt='http://www.plumtree.com/xmlschemas/ptui/'/>"; HTMLAnchor myAnchor = new HTMLAnchor(sUrl); myAnchor.AddInnerHTMLString("Add a Logo"); myCell.AddInnerHTMLElement(myAnchor);

i think, something is wrong in the approach itself.
when you include the code, you do not need to create a new
instance of Hmenu. Instead, you can simply use lnkBar .addChild(),
because the this code is of your Hmenu itself.
But i suggest you to use dataprovider for the linkbar instead
of looping through the categories and adding the child.
you just declare xmlData as Bindable and provide it as
dataProvider of the linkbar.
hope it works.

Obiee oracle gateway error while updating row count

Hi ,
OBIEE server 11.1.1.5 ,oracle server11g installed in linux 64bit,
while updating row count in Admin tool i am getting the following error
[NQODBC][SQL_STATE:HY000][nQSError:10058] A general error has occured.
[nQSError: 43113]Message returned from OBIS.
[nQSError:43093]An error occured while processing the EXECUTE PHYSICAL statement.
[nQSError:17003]Oracle gateway error: OCIEnvNIsCreate or OCIEnvInit failed to initialize environment.Please check your Oracle Client installation and make sure the correct version of OCI libraries are in the library path.
i am able to check the database from sqlplus it is working fine.
Any suggestion highly appreciated plzzz

Make sure your connection pool is valid and able to import or execute reports.
If everything good as above said, in Physical layer database properties-> general tab choose the database version and try it once.
If not
Check the doc id 1271486.1
Or
To resolve the issue create a softlink (ln -s) in the <OracleBI>/server/Bin folder to link to the 32-bit Oracle Client Driver file.
The example below shows how to perform a softlink from the 64 bit directory:
cd /u10/app/orcladmin/oracle/OracleBI/server/Bin
ln -s $ORACLE_HOME/lib32/libclntsh.so.10.1 libclntsh.so.10.1
If helps mark

"Not Gatewayed" error

I'm adding my first .NET portlet to our new 5.0.1 portal. I can have the page load properly if I remove all IPortletContext code. However, when loading, it loads the first time into the portal ok, but when I try to do any "click throughs" with buttons I get the dreaded "Not gatewayed" error.
I've triple-checked the HTTP configuration on the portlet web service setup and have the proper URL's (according to the EDK). However, still getting that. I'm thinking its the way I'm posting the information back, or a setup on my form variable or something?
Buttons that get clicked are paging buttons to show "more" rows of data in a data grid element.
Any help or thoughts would be appreciated!
Kirk [email protected]

Thanks to this thread I realized I needed to install the Plumtree Web Controls (2.0) as I was using the DataGrid feature. However, the main button I test with is actually just a "submit" button. I'm sure I'm missing something pretty simple, so I'll include some more detail. Hope someone can find what I'm missing:
Page is "Chargebacks.aspx"
Form action is "Chargebacks.aspx" in folder (web app) http://Tportaldev1/Chargebacks/
Gateway page on web service setup is:
http://TPortaldev1/Chargebacks/
The gadget loads into a My Page and works fine. When I try to hit a submit button, it takes me to the error. When I view source on the page that is working in the my page, I notice the form action is forced to the full http://tportaldev1/chargebacks/chargebacks.aspxeven tho I don't specify it, or if I do, I specify just the page. Apparently the URL transformer is not hitting this...any thoughts?

Strange Gateway Error with one APP Server (WSAETIMEDOUT)

Hello Everyone,
We are experiencing a strange gateway timeout issue on one application server in our SAP environment. This started happening after we applied a series of Microsoft patches and updated the SAP kernals from 179 (DB 172) to 185 (DB 182).
From this App server we are seeing all kinds of gateway errors, the following is a sample from the dev_rd file from the server in question:
LOCATION    SAP-Gateway on host sappe1exp5 / sapgw00
ERROR       partner 'sappe1exp4:sapgw00' not reached
TIME        Sat May 30 23:40:54 2009
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER     67
GwTraceHdlInfo:
HANDLE   = 6
TIME     = Sat May 30 23:40:33 2009
SOCKET   = 468
STAT     = NI_CONN_WAIT
TYPE     = STREAM IPv4
OUT      = 0 messages 0 bytes
IN       = 0 messages 0 bytes
LOCAL    = 0.0.0.0:2604
REMOTE   = -
OPTIONS = BUFFERED
ni hdl      = 6
type        = CLIENT
net_stat    = CONNECT_TO_REM_GW_PENDING
hostaddr    = 10.10.0.21
opcode      = NORMAL_CLIENT
conn opcode = REMOTE_GATEWAY
conn vers   = 105
index       = 59
data        = 0000000000000000
ext_info    = 000000000333DCA0
offset      = 0
rest_len    = 0
snc_forced = 0
remote gateway infos:
hostname =
hostaddr = 10.10.0.21
service = sapgw00
tpname   = sapdp00
Sat May 30 23:46:17 2009
***LOG Q0I=> NiPConnect2: connect (10060: WSAETIMEDOUT: Connection timed out) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 6 / sock 428
    (SI_ECONN_REFUSE/10060; I4; ST; 10.10.0.21:3300) [nixxi.cpp    2823]
I have done alot of searching and I have tried the following things:
1) Checked the services file of this machine, they line up with all other systems
2) Attempted to telnet to other App servers on 3200, 3300, 3600 with no success
3) tried to connect via SM59 to another App server with no success
4) Attempted to do all of these things in reverse from the another app server with the same results.
This is only happening with one app server in our landscape and this app server has no issues connecting to the CI.
Any ideas on where I can look further?
Edited by: James Wright on Jun 5, 2009 10:10 PM

Hi,
on sappe1exp5 try the following command in a dos prompt:
telnet sappe1exp4 sapgw00
this should also time out i.e. hang for a certain amount of time (~50 seconds) and then terminate with error.
It simply means that the IP address 10.10.0.21 is not reachable from your client PC.
Maybe you changed some IP addresses during patches. Usually there is an RFC destination that is not functioning properly.
Best regards
Carl Philipp

Hi All , Getting connection to Gateway error when synchronizing in MI

Hi All , Getting connection to Gateway error when synchronizing in MI using MAU application .
Please provide the solution ASAP.
Also provide the notes which can be avilable in SERVICE.SAP
Thanks&Regards.
Bharat

Hi,
well, the error - you should get this error as well if you sync with a new and empty client? It seems your Sync service is down. Check the sync service itself. Is the URL accessible from the device itself?
It is usually not related to the App (MAU in your case) it is related to the ladscape itself.
Can you add the correct error message and the part of the trace that shows the message? Including the lines before with the ping if the server is available?
Regards,
Oliver

SRA Gateway and short URL's

Is it possible to configure SRA Gateway so it redirect external requests with "short" urls to internal portal?
https://gateway.abc.lt/banklogin.do -> https://gateway.abc.lt/http://psrv1.abc.lan:8080/banklogin.do
Can it be achieved using additional Rewriter RuleSet or I have to configure a web proxy?
Reason is, customers has been using these URL's for a while. We migrating from a configuration where loadbalancers used to hit portal server directly and there a bunch of URL with /serverlet.do form.
Any help is appreciated.
-Saul

Hey sorry to jump in on this, but you mentioned the Re=Write module for IIS. I was a little confused. Do you download this extension to you local desktop? or to your remote hosting server?. I have IIS on my machine, but at the moment have it disabled due to running WAMP as well. I know how to configure WAMP to run on a different port, but if this extension goes on my remote server, I wouldnt have to do that. Thanks for any advice!

SRA gateway - performance problems

Hi!
I'm experiencing slow response with SRA gateway when I stress the home page in a site www.example.com. I redirected the SRA default home page to a custom application home page.
In my deployment, I have one machine with SRA 2005Q1 and my application is running in another machine with Application Server 7 EE UR4.
I stressed the application with two tools: Jmeter and Pureload, getting the same results. I put only one worker, 1 thread and 20 iterations, so it's a very low load for the response that I'm getting.
When I test the application directly, without SRA, I get a very good average response of about 300ms, but when I test the application with SRA gateway protecting the application, I get an average response from 12 to 16 seconds!
I followed all SUN tuning recomendations and ran the perftune script and still got the same results.
When I execute the stress tests, the processor has a load of 4% and the memory usage is 14%.
After analyzing the results I noticed that the main page loads quickly but the average load time of the images is very high. I searched in sunsolve for similar problems with SRA slow loading of images and static content, but I didn't find anything.
Anyone has the same problem? any ideas how to solve it? where can I find more documentation?
thx in advance. Hjuarez :)

Hi There.
First off, I'd do a few things, what's your threadpool set to? default is 200, i'd bump this to 500.
Honestly, I'd test it with NO TUNING, (method of my madness) IE your 'gateway' script CMD variables, Just modify the min and max memory setting, default is 64 and 128, i'd set it to 128 and 1024-2048, and remove all over tuning suggestions (unless you have GC monitoring variables.
my portal system get's 220,000 logins a month, and my gateway is a 280R 2x900mhz sparc 3 system, and it's extremely fast (well, as fast as the gateway goes anyhow :-) )
- I'd be interested to see your results, I have 2004Q2 on my system. there's various other factors in play here, but I tried a 'tuned' gateway, and it was 25-30 % slower then 'untuned' and i've been running my gateway with this minimal tuning since oct 05. I've had no stability problems.
in your amconsole gateway setup area, do you have persistent connections on or off? on=faster throughput, but on my system cause JSS/NSS issues, and gateway coredumps, so it's off right now.
Dave
PS how is jmeter and pureload working for you?

504 gateway error

Hi. I have a macbook air and when I try to open up certain websites, it says 504-GATEWAY ERROR!
I have cleared browsing data, restarted and tried different browsers. I need HELP!
Is there anyway to fix this?

That's a problem on the web server, not on your computer.

E71 gateway error

I own a Nokia E71 device since 2 weeks now and i have been very satisfied with it till today. I went for a trip to some cool cities, when i suddenly found myself in need to consult the internet. I searched for and found an unsecured WLAN network. I connected succesfully. I waited some time but the page i was browsing too remained blank. Suddenly, a gateway error message popped up. I searched for other networks and i found another 6 unsecured networks. I got this error everytime. At home, i can succesfully browse the web on my E71. I am even typing this message on my E71 right now. I just can't seem to connect to other networks anymore. I already tried to disable energy saving, and i also fiddled around with the advanced settings. Nothing helped. The last thing i tried was upgrading the firmware which i did succesfully. The phone is fully resetted after an upgrade. I consciously did not backup my settings, to see if the problem would be gone. I spent alot of time to set up everything again, and i tried to connect again and guess what: just another gateway error. This cannot be a hardware faillure since i can still connect to my network. What can be the problem? Thanks very much in advance.

Oh my dear, sorry for the bad formatting. It seems that my enters to part the text into paragraph, do not appear. I wrote it in Opera Mini. Sorry for the inconvenience, folks! I hope this will not shoo away any experts that may be able to help me. By the way: the networks that all failed were unsecured. My network is WEP secured and this works. This might be an interesting detail.

502 gateway error

Hi,
I've come across a problem and not sure where the problem lies, hope
someone can help me. When I access webmail through portal gateway
(Portal 3SP2 on Solaris 8 (webmail from iMS 5.1), and attach big
attachments (>400kb through dial up, over 2MB through DSL), I eventually
receive this message while my attachment is uploading:
Unable to fulfill your request
Server returned 502 Gateway Error: Session: Unable to connect to host:
hostname of portal+profile server.
The timeout periods differ, which makes it hard in pinpointing the
error. For example, using DSL, uploading a 2.25 MB attachment, I got
the error after 7 minutes of uploading, while I received it after 4
minutes on a modem line. I have no issues uploading small attachments.
The portal server (not gateway) also has the messaging server residing
on it, no messages in the error log of the messaging server.
thanks in advance,
Manon

Generally 502 Gateway error occurs when the URL in the address bar is not reachable by the Gateway. Maybe the URL is not the correct one or some rewrite related issues. The best way to debug is to bypass the gateway and check if the URL works fine from all the servers (in http mode). Another workaround is, try pinging that particular domain from Gateway Host.
If you still find the error, Turn the debug=message in /etc/opt/SUNWips/platform.conf and try to reach the same URL 2 or 3 times. Then send me the /var/opt/SUNWips/debug/iwtGateway file.

Failed BEXANALYZER gateway errors stay in DISCONNECT state

When I check SMGW I can see gateway errors for BEXANALYZER. Normally the parameter gw/conn_disconnect would cleanup these sessions (session w/ state of DISCONNECT). But this parm does not cleanup registered server programs.
Any ideas how these can be removed?
AL08 will show "old" users - in this case failed RFC's so it is misleading.
Thank you.

Hello Agus
The error message indicates that the dispatcher process was not able to
deliver a NOWP message to a user context that does no longer exists.
This happens if a batch process issues an asynchronous RFC that shall
send a response when it finishes. However, the batch job does not wait
to collect the answer.
When the dispatcher tries to pass the result of the aRFC to the batch
process, it realizes that the context that issued the RFC no longer
exists and prints out the message.
YOu can safely ignore the message.
And for more information, Please refer to the notes:
27617     Syslog Q0G, scratch area too small
191234    Syslog: Q0G K request (type NOWP) cannot be ...
681085 Scratch area is too small, opcode 6
62239   Termination when maintaining syslog filters
This information should help a lot.
Regards,
Paul

AES support for SRA Gateway

Is it available an AES256 encryption support for the SRA Gateway Service?
Otherwise, is it possible to plug-in a custom/self-made cipher?
Finally (this is an RFE) it will be interesting if the Gateway could do the encryption job by using openssl APIs instead of the NSS ones, so that one could use his own openssl-based engine.

Hi Walt, thank you for the feedback and for using the Remote Desktop app.
We look at the user feedback in the Store and other site and know how important Gateway is to Remote Desktop, notably so on a phone.
This is on our list of scenarios to enable, look for it in a future update later this year.
Thanks,
David Belanger
This post is "AS IS" and confers no rights.

DEFAULT GATEWAY ERROR

we recently installed microsoft outlook 2013 in windows 7 in our office whille we are trying to connect the outlook to exchange server it show some message
message appearing on my screen is :The action can nt completed.The microsoft exchanage is unavaliable.your network adapter doesnt have the default gateway error.
In microsoft exchange community we seen some solution and that solutions are also tried we get solution for this problem,so please suggest us solution to this problem.

Hi,
If your client doesn't have a Default Gateway, then you need to create a Dword named
DefConnectOpts, value "0" in the registry at HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\RPC
See: http://support.microsoft.com/kb/913843
If you do have Default Gateway, then may I ask if you are connecting to an Exchange Server over Direct Access?
Martina Miskovic

SRA Gateway Error

Similar Messages

Maybe you are looking for