Src Addr filter and Dst Addr filter

Wht is the format/syntax of specifying IP addresses in the Src Addr filter and Dst Addr filter fileds of any signature?
Can i put a subnet, multiple subnets etc ? any syntax examples?
I can't put the $<VARIABLE> is wht i have found out.

Here are some examples:
192.168.1.1
192.168.1.0-192.168.1.255
192.168.1.0-192.168.1.255,192.168.2.0-192.168.2.255

Similar Messages

I have Camera Raw 8.7.1 and I don't have camera raw filter and the radial filter tool

I have Camera Raw 8.7.1 and I don't have camera raw filter or the radial filter tool. Reading on line says it should be available? I am confused... why do I not have these tools?

Because you’re using CS6 not CC.

Report filter and column formula filter help

Using OBIEE 11.1.1.6.8
I have a column formula in an OBIEE Analysis that queries data based on a specific File Date: 31-Oct-2013. the formula looks like this: SUM(CASE WHEN "CLOV - File Date"."File Date" = '31-OCT-2013' AND "Pending Claim - Process Time"."Claim Date" <= TIMESTAMP '2013-01-31 00:00:00' THEN 1 ELSE 0 END)
The issue is I have other columns that need to query data as of the most recent File Date available. For that, I usually use this in the report filter section: SELECT MAX("CLOV - File Date"."File Date") FROM "VETSNET OPERATIONS REPORTS". this will pull the most recent date available.
What formula(s) do I need to use so I can have other columns pull the most recent data while the other column always uses the 31-Oct-2013 date?

If you like to port the same logic in Analysis then that might be easy to do.
Not sure how to handle other column ie Claim without looking data, but try with a new metric max(File Date) and set the content level may be Year or as per requirement and use that column in the same expression
let us know updates

I have Camera Raw 8.7.1 installed. Sometimes it will allow me access to the Radial Filter and sometimes not. Why?

I have Camera Raw 8.7.1 installed. Sometimes it will show me icons for the Graduated Filter and the Radial Filter and I can use both. At other times it will not show the Radial Filter and of course when that happens I can't use it. Why?

I have CS 6 installed as well as a subscription to Photoshop CC, but I don't use CS 6. I'm just keeping it around in case Adobe jumps the CC subscription price out of sight. I was using Photoshop CC and Bridge. I always pass my .nef and .jpg files through ACR first. Sometimes the Radial Filter button is there and sometimes it is not.

Form based j_security_check with javax.servlet.Filter and some pesky images

We have defined the web app to use Form based authentication. Some of the images internal to our application we would like to allow access without having to formally log into the system. In order to accomodate this we have created an javax.servlet.Filter where we strip off some parameters off of the end of the url to log them in.
This works great for everything EXCEPT urls that are in <img src> tags. urls in these tags will never hit the filter. You can take the same url and place it in the browser and it will hit the filter. Its just urls in <img src> tags.
The images cannot be moved to a public place, they must stay where they are.
Does anyone know why the <img src> tag is doing this? It is fairly easy to replicate. Just use form based authentication, create a filter, and try to access an image from an img src tag.
Be sure to clear your browser cache and try again if you think you have it working.
Any security gods out there?
Thanks,
Mark

Since nobody responded, I will tell you what we decided to do. For images, we use a servlet outside of the security wall that loads and streams an image back to the browser instead of a direct image url.
So we do something like this:
<img src="https:\\foo.com\Servlet\ImageDisplay?id=1234&user=23432">
Then our servlet parses the params, finds and streams back the image, and instead of returning back "html\text" in the servlet, the servlet returns something like this:
HttpServletResponse response = blah...
BufferedImage bi = new BufferedImage("load in the image resource");
try {
response.setContentType("image/gif");
ServletOutputStream out = response.getOutputStream();
JPEGImageEncoder encoder = JPEGCodec.createJPEGEncoder(out);
encoder.encode(bi);
catch (IOException ioe) {
servlet.log("DrawMapAction: IO Exception encoding JPEG to ServletOutputStream.", ioe);
}

QSUF (Query string url filter) and SQL Server reporting services report viewer parameters

Hi,
this is my issue:
I have a SQL Server reporting services web part on a page with a report with 1 parameter, lets say it's a client list
Then i have a QSUF that will be used to filter the clients list through the URL
However, once i connect the filter and the report viewer web part, the parameter goes away and is no longer accessible
I'd like to somehow keep the parameter visible, in case there is no parameter sent through the URL, i would like the user to be able to choose a client from the parameter drop down list
I saw that there is a "send empty if no values are passed" option, but i can't seem to get this working properly and i don't know if this option will make the parameter visible again
Any help would be appreciated
Thanks.

Hi,
According to your post, my understanding is that the query string url filter web part not worked well with SQL server reproting services web part.
Did you use the Wiki page layout in your environment?
You can change the page to a web part page, then check whether it work.
There is a similar thread for your reference.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/4d7584e3-8e1a-48bf-9346-32f8cb480dd1/query-string-url-filter-web-part?forum=sharepointgeneralprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Web Logic 10.3.6 (64bit) - Could not load the sitemesh filter and library

Installed Web Logic 10.3.3 (32bit) and Java JDK 1.6.0_21 (32bit) in a customer's server (Windows Server 2008 R2 and 64-bit Operating System). The web page can be displayed with header and side menu.
However installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) on that same server. The web page cannot be displayed with header and side menu, it is just displayed with a blank background. Refer to the below "ERROR LOG", found the application could not load the sitemesh filter and library properly. We are using sitemesh-2.3.jar.
Have tried installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) in a test server (Windows Server 2008 R2 and 64-bit Operating System). The web page can be displayed with header and side menu.
Please assist on this issue. Thanks.
Below is the sitemesh that is declared and configured.
WEB-INF/web.xml
<filter>
<filter-name>sitemesh</filter-name>
<filter-class>com.opensymphony.module.sitemesh.filter.PageFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>sitemesh</filter-name>
<url-pattern>/*</url-pattern>
<dispatcher>REQUEST</dispatcher>
<dispatcher>FORWARD</dispatcher>
<dispatcher>INCLUDE</dispatcher>
</filter-mapping>
WEB-INF/decorators.xml
<decorators defaultdir="/template/decorators">
<decorator name="plain" page="plain.jsp"/>
<decorator name="printable" page="printable.jsp"/>
<decorator name="standard" page="page_template_std.jsp">
<pattern>/*.jsp</pattern>
</decorator>
<excludes>
<pattern>/include/*</pattern>
<pattern>/js/*</pattern>
<pattern>/Login.jsp*</pattern>
</excludes>
</decorators>
WEB-INF/sitemesh.xml
<sitemesh>
<property name="decorators-file" value="/WEB-INF/decorators.xml"/>
<excludes file="${decorators-file}"/>
<page-parsers>
<parser content-type="text/html"
class="com.opensymphony.module.sitemesh.parser.HTMLPageParser" />
<parser content-type="text/html;charset=ISO-8859-1"
class="com.opensymphony.module.sitemesh.parser.HTMLPageParser" />
</page-parsers>
<decorator-mappers>
     <mapper class="com.opensymphony.module.sitemesh.mapper.PageDecoratorMapper">
          <param name="property.1" value="meta.decorator" />
          <param name="property.2" value="decorator" />
     </mapper>
     <mapper class="com.opensymphony.module.sitemesh.mapper.FrameSetDecoratorMapper">
     </mapper>
     <mapper class="com.opensymphony.module.sitemesh.mapper.AgentDecoratorMapper">
          <param name="match.MSIE" value="ie" />
          <param name="match.Mozilla [" value="ns" />
          <param name="match.Opera" value="opera" />
          <param name="match.Lynx" value="lynx" />
     </mapper>
     <mapper class="com.opensymphony.module.sitemesh.mapper.PrintableDecoratorMapper">
          <param name="decorator" value="printable" />
          <param name="parameter.name" value="printable" />
          <param name="parameter.value" value="true" />
     </mapper>
     <mapper class="com.opensymphony.module.sitemesh.mapper.RobotDecoratorMapper">
          <param name="decorator" value="robot" />
     </mapper>
     <mapper class="com.opensymphony.module.sitemesh.mapper.ParameterDecoratorMapper">
          <param name="decorator.parameter" value="decorator" />
     </mapper>
     <mapper class="com.opensymphony.module.sitemesh.mapper.FileDecoratorMapper">
     </mapper>
     <mapper class="com.opensymphony.module.sitemesh.mapper.ConfigDecoratorMapper">
          <param name="config" value="/WEB-INF/decorators.xml" />
     </mapper>
</decorator-mappers>
</sitemesh>
ERROR LOG
####<May 8, 2012 5:38:49 PM SGT> <Error> <HTTP> <BHQKPK10060> <cms_cimbmy> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1336469929804> <BEA-101165> <Could not load user defined filter in web.xml: com.opensymphony.module.sitemesh.filter.PageFilter.
com.opensymphony.module.sitemesh.factory.FactoryException: Cannot construct Factory : com.opensymphony.module.sitemesh.factory.DefaultFactory: java.lang.reflect.InvocationTargetException
     at com.opensymphony.module.sitemesh.Factory.getInstance(Factory.java:50)
     at com.opensymphony.module.sitemesh.filter.PageFilter.init(PageFilter.java:87)
     at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
     at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

Do you see any further nested exceptions OR errors in the log file.
Considering that the same WLS-JDK combination works on one machine and does not work on another machine, it indicates an environmental issue.
"However installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) on that same server. The web page cannot be displayed....
Have tried installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) in a test server (Windows Server 2008 R2 and 64-bit Operating System). The web page can be displayed with header and side menu."
I am suspecting if it has to do anything with the native libraries being loaded JAVA_LIB_PATH.
Please review the server log file again for identifying differences in LIB_PATH or PATH or any messages saying "Unable to load native.. performance pack.."
Arun

How to install plugin and exta filter in photoshop cs ? and any special filter for special effects ?

how to install plugin and exta filter in photoshop cs ? and any special filter for special effects ?
kindly recommend me any best one and tel me step by step how i will add more plugins n filters

A Plug_in normally come with an installer or install instructions. Check the documentation for the plug-in you trying to install. It sounds like you don't know what plug-ins you want to install. In that case you don't need to install any. At some point you may read about a plug-in and what it can do and feel you have a need for it. Then you will have a reason to install a plug-in that is not installed by default. There may also be a cost involved most worthwhile plug-ins are not free.
Adobe Optional Plug_ins downloads are Plugins Adobe want to remove from Photoshop and no longer install by default. Also at some point in time these will no longer install into the current Photoshop for Adobe will remove feature or interfaces the use. For example the CS5 optional plugins will install in Windows CS6 perpetual version 13.0.1.3 but not in Subscription version 13.1.2 or perpetual Mac version 13.0.6 fot its 64bit only and the Mac CS5 optional plug-in for Picture package is only a 32bit plug-in.
You will need to keep and maintain old versions of Photoshop if Adobe remove features you use in new versions of Photoshop.

I am trying to apply a lens filter in CS6 to a mp4 movie from the phantom 2 . I do the normal steps of lens filter and choose dji, phantom2 , and I click ok and the picture improves and there is less curve etc. What I don't know is why it seems to revert

I am trying to apply a lens filter in CS6 to a mp4 movie from the phantom 2+. I do the normal steps of lens filter and choose dji, phantom2+, and I click ok and the picture improves and there is less curve etc. What I don't know is why it seems to revert back to the old movie when I come back later on. I know I saved it but I must be doing something wrong. Here are my steps:
Open an Mp4 movie
Choose filter, lens correction
Choose dii
choose Phantom FC200
click ok and the image improves.
I then save as a name.psd and close the file.
I reopen the file and it looks good. When I play the movie it just jumps back to the old curved horizon.
What am I doing wrong? If you can help me I would be very grateful.
Marc

AND yea i afraid to sync my iphone and lose everything ;( i had everything perfect sync ing perfect ical,contacts,mail,apps and now sence new library I dont wana lose everything.....my hole life runs on my fone i need help bad

How to deactivate Filter and Job in Job scheduling?

Hi,
My scenario is:
XI will poll the file from 3rd party system and wil send to R/3 via IDOC adapter.
On every sunday , R/3 will be down for 3-4 hrs for maintenance purpose.
I need to create job scheduling in such a way that XI sould collect all the message coming on sunday during that period
of time and after endtime has reached , it should process those message and should send the message to R/3 system.
I have created Sender/Receiver ID ..also create Filter and a JOBID.
while creating Job ID i specified the following
1: Start Date    = 18.08.2009
2:Start Time     = 11.00.00
3:End Date      = 18.08.2009
4:End Time      = 15.00.00
5:Period          = 7
6:Period Unit   = D (Days)
Job should be scheduled at 11.00.00 and end at 15.00.00 ,filter and Job both should deactivate and after 15.00.00 it should process those messages.
But the problem is it doesnt deactivate the filter.
I tried using SXMS_JOB_DEACTIVATE and SXMS_START_JOB_AT_ONCE
Both deacitvtes the JOB but not filter.
Can any body tell me , how to go with it.
Also if I have to write a report, what all things are required.
regards,
Mayank

Hi Volker,
Down time for R/3 is more ..so i am not sure whether XI will trying till that time or not.
And XI is not able to than all the incoming messages in XI during that period of time will be Red Flag.
can we write a report in XI such a way that .. all the queued messages should be processed ..thorugh Job scheduling.

Top-N Filter and Rank

Hi,
I want to display the Top-3 records based on the dashboard prompts and also display the overall rank of the record independent of the prompt.
My data is in the format:
Region Market Revenue
East New York1 $100
East New York2 $80
East San Jose1 $50
East San Jose2 $60
North Det1 $125
North Det2 $20
North Dal1 $22
North Dal2 $25
Users will be selecting the Region, Market from Dashboard prompts and want to see the top-3 based on their selection and also see their rank nationally. So, If I selected East Region, my output should be
Region Market Rev Rank
East New York1 $100 2
East New York2 $80 3
East San Jose1 $50 5
I defined a Top-3 filter and used Rank function but that gives the ranking as 1,2,3. This is expected as it is ranking the filtered set. I tried the Rank By function but that didn't help either.
Any help would be appreciated.
thanks,
Prakash

Build the "overall" ranking in the BMM layer and expose it as a separate column. Then add it to your Request. Now the rank will be independent of the filter.

The Graduated Filter and Adjustment Brush in Lightroom 4 | The Complete Picture with Julieanne Kost | Adobe TV

In this episode of The Complete Picture, discover the power of making selective adjustments like dodging and burning, color corrections and noise removal using the Graduated Filter and Adjustment Brush in Lightroom 4. Note: although this video was recorded in Lightroom, the same techniques are available in Adobe Camera Raw in Photoshop CS6.
http://adobe.ly/QPYXzm

Julianne is a great tutor but the picture behind her head is distracting.
Tom Torda

Bloom filter and performance

I have the following query:
SELECT
                obst.obst_id obstructionId
               ,oost.comment_clob CommentClob
               ,chp1.ptcar_no StartPtcar
               ,chp2.ptcar_no EndPtcar
               ,oost.track_code Track
               ,oost.start_date StartPeriod
               ,oost.end_date EndPeriod
               ,oost.doc_no RelaasId
               ,obst.status_code Status
        FROM   T1 obst
             , T2 oost
             , T3 chp1
             , T3 chp2
          where obst.oost_id      = oost.oost_id
          and oost.chp_id_start = chp1.chp_id
          and oost.chp_id_end   = chp2.chp_id
          and obst.obs_stat     = 2
   and add_months(obst.mod_date,13) >= :ld_curr_date
   and oost.start_date between :ld_from_date and :ld_to_date
          and exists (select 1
                        from T4 obsv
                           , T5 veh
                        where obsv.veh_id = veh.veh_id
                        and (:ln_opr_id is null
                               OR veh.opr_id = :ln_opr_id)
                        and obsv.obst_id = obst.obst_id
                        and veh.ac_number between :ln_min_number and :ln_max_number
                        and obsv.start_date > obst.start_date
         order by obst.obst_id;
Giving the following execution plan where a bloom filter has been used.
| Id | Operation                           | Name                    | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads |
|   0 | SELECT STATEMENT                    |                         |      1 |        |     10 |00:02:13.09 |     128K| 94376 |
|   1 | SORT ORDER BY                      |                         |      1 |      8 |     10 |00:02:13.09 |     128K| 94376 |
|   2 |   NESTED LOOPS                      |                         |      1 |        |     10 |00:02:13.06 |     128K| 94376 |
|   3 |    NESTED LOOPS                     |                         |      1 |      8 |     10 |00:02:13.06 |     128K| 94376 |
|   4 |     NESTED LOOPS                    |                         |      1 |      8 |     10 |00:02:13.06 |     128K| 94376 |
|* 5 |      HASH JOIN SEMI                 |                         |      1 |      8 |     10 |00:02:13.06 |     128K| 94376 |
|   6 |       JOIN FILTER CREATE            | :BF0000                 |      1 |        |   1469 |00:00:02.06 |   12430 |     76 |
|   7 |        NESTED LOOPS                 |                         |      1 |        |   1469 |00:00:00.17 |   12430 |     76 |
|   8 |         NESTED LOOPS                |                         |      1 |    307 |   5522 |00:00:00.11 |   10545 |     52 |
|* 9 |          TABLE ACCESS BY INDEX ROWID| T2                      |      1 |    316 |   5522 |00:00:00.07 |    3383 |     46 |
|* 10 |           INDEX RANGE SCAN          | T2_OOST_START_DATE_I    |      1 |   1033 |   8543 |00:00:00.03 |      33 |      3 |
|* 11 |          INDEX RANGE SCAN           | T1_OBST_OOST_DK_I       |   5522 |      1 |   5522 |00:00:00.08 |    7162 |      6 |
|* 12 |         TABLE ACCESS BY INDEX ROWID | T1                      |   5522 |      1 |   1469 |00:00:00.13 |    1885 |     24 |
| 13 |       VIEW                          | VW_SQ_1                 |      1 | 64027 |   1405 |00:00:07.82 |     115K| 94300 |
|* 14 |        FILTER                       |                         |      1 |        |   1405 |00:00:07.82 |     115K| 94300 |
| 15 |         JOIN FILTER USE             | :BF0000                 |      1 | 64027 |   1405 |00:00:07.82 |     115K| 94300 |
| 16 |          PARTITION REFERENCE ALL    |                         |      1 | 64027 | 64027 |00:01:48.22 |     115K| 94300 |
|* 17 |           HASH JOIN                 |                         |     52 | 64027 | 64027 |00:02:03.37 |     115K| 94300 |
| 18 |            TABLE ACCESS FULL        | T4                      |     52 | 64027 | 64027 |00:00:00.34 |    1408 |    280 |
|* 19 |            TABLE ACCESS FULL        | T5                      |     41 |    569K|   5555K|00:02:08.32 |     114K| 94020 |
| 20 |      TABLE ACCESS BY INDEX ROWID    | T3                      |     10 |      1 |     10 |00:00:00.01 |      22 |      0 |
|* 21 |       INDEX UNIQUE SCAN             | T3_CHP_PK               |     10 |      1 |     10 |00:00:00.01 |      12 |      0 |
|* 22 |     INDEX UNIQUE SCAN               | T3_CHP_PK               |     10 |      1 |     10 |00:00:00.01 |      12 |      0 |
| 23 |    TABLE ACCESS BY INDEX ROWID      | T3                      |     10 |      1 |     10 |00:00:00.01 |      10 |      0 |
Predicate Information (identified by operation id):
   5 - access("ITEM_1"="OBST"."OBST_ID")
       filter("ITEM_2">"OBST"."START_DATE")
   9 - filter(("OOST"."CHP_ID_START" IS NOT NULL AND "OOST"."CHP_ID_END" IS NOT NULL))
10 - access("OOST"."START_DATE">=:LD_FROM_DATE AND "OOST"."START_DATE"<=:LD_TO_DATE)
11 - access("OBST"."OOST_ID"="OOST"."OOST_ID")
12 - filter(("OBST"."OBS_STAT"=2 AND ADD_MONTHS(INTERNAL_FUNCTION("OBST"."MOD_DATE"),13)>=:LD_CURR_DATE))
14 - filter((:LN_MIN_ac_number<=:ln_max_number AND TO_DATE(:LD_FROM_DATE)<=TO_DATE(:LD_TO_DATE)))
17 - access("OBSV"."VEH_ID"="VEH"."VEH_ID")
19 - filter(((:LN_OPR_ID IS NULL OR "VEH"."OPR_ID"=:LN_OPR_ID) AND "VEH"."ac_number">=:LN_MIN_ac_number AND
              "VEH"."ac_number"<=:ln_max_number))
21 - access("OOST"."CHP_ID_START"="CHP1"."CHP_ID")
22 - access("OOST"."CHP_ID_END"="CHP2"."CHP_ID")
This query completes in a not acceptable response time of more than 2 minutes and this is why it has been handled to me for possible improvement.
As you might have already pointed it out from the above execution plan, the operation number 19 is the most time consuming operation (TABLE ACCESS FULL of T5). The query without the EXISTS part represents our data. This part of the query is very fast. It gives about 1500 rows. However, when we want to limit those 1500 records to only records satisfying the exists clause (10 records), the query starts not performing very well because of this full table scan on T5 (5,5 millions).
The ideal situation would have been to :
(a) first join table T5(alias veh) with the table T4(alias obs) using the join condition (predicate 17) limiting the number of record from T5 table
(b) and then filter from T5 table (predicate 19)
But in this case the CBO is starting by a costly full scan of the entire T5 table (5,5 millions of rows operation 19) before sending this enormous amount of data to the HASH JOIN operation 17 which finally throw away the majority of T5 rows not satisfying the join condition : access("OBSV"."VEH_ID"="VEH"."VEH_ID")
I have already verified that the table statistics and their join column statistics are up-to-date and are reflecting the reality. But failed to know how to let the CBO automatically doing what I want it to do i.e. Join first and then filter.
When I discussed with the client we agreed to re-factor a little bit this query so that it is now completing in few seconds.
The new plan is not using bloom filter and the veh table is accessed via its unique index on VEH_ID (18 - access("OBSV"."VEH_ID"="VEH"."VEH_ID")) before applying the filter operation. Exactly as I wanted it to be in the original query
Have you any idea on how to change this join method/order so that the full table scan is post poned? of course without refactoring the query
Do you think that bloom filter is the culprit here?
Thanks in advance
Mohamed Houri
PS : and veh.ac_number between :ln_min_number and :ln_max_number
These two imput parameters are beyound the known low and high value. But even when I used min and max value taken from the table (min = low_value from stats and max = high value from stat), the plan didn't changed

Jonathan,
I got the plan I was looking for.
It is not exactly the same as the execution plan that corresponds to the re-factored query but it is what I wanted to have.
SELECT /*+ gather_plan_statistics */
               obst.obst_id obstructionId
               ,oost.comment_clob CommentClob
               ,chp1.ptcar_no StartPtcar
               ,chp2.ptcar_no EndPtcar
               ,oost.track_code Track
               ,oost.start_date StartPeriod
               ,oost.end_date EndPeriod
               ,oost.doc_no RelaasId
               ,obst.status_code Status
        FROM   T1 obst
             , T2 oost
             , T3 chp1
             , T3 chp2
        where obst.oost_id = oost.oost_id
          and oost.chp_id_start = chp1.chp_id
          and oost.chp_id_end = chp2.chp_id
          and obst.obs_stat = 2 -- only reeel
                and exists (select /*+ no_unnest push_subq */ 1
                        from T4 obsv
                           , T5 veh
                        where obsv.veh_id = veh.veh_id
                          and (null is null
                               OR veh.opr_id = null
                          and obsv.obst_id = obst.obst_id
                          and veh.ac_number between 1 and 99999
                          and obsv.start_date > obst.start_date
          and oost.start_date between to_date ('20/11/2013','DD/MM/YYYY') and to_date ('27/11/2013','DD/MM/YYYY')
          and add_months(obst.mod_date,13) >= sysdate
         order by obst.obst_id
| Id | Operation                                 | Name                    | Starts | E-Rows | A-Rows |   A-Time   |
|   0 | SELECT STATEMENT                          |                         |      1 |        |      6 |00:00:00.56 |
|   1 | SORT ORDER BY                            |                         |      1 |    254 |      6 |00:00:00.56 |
|* 2 |   HASH JOIN                               |                         |      1 |    254 |      6 |00:00:00.11 |
|   3 |    TABLE ACCESS FULL                      | T3                      |      1 |   2849 |   2849 |00:00:00.01 |
|* 4 |    HASH JOIN                              |                         |      1 |    254 |      6 |00:00:00.11 |
|   5 |     TABLE ACCESS FULL                     | T3                      |      1 |   2849 |   2849 |00:00:00.01 |
|   6 |     NESTED LOOPS                          |                         |      1 |        |      6 |00:00:00.10 |
|   7 |      NESTED LOOPS                         |                         |      1 |    254 |   5012 |00:00:00.09 |
|* 8 |       TABLE ACCESS BY INDEX ROWID         | T2                      |      1 |    262 |   5012 |00:00:00.06 |
|* 9 |        INDEX RANGE SCAN                   | T2_OOST_START_DATE_I    |      1 |    857 |   7722 |00:00:00.01 |
|* 10 |       INDEX RANGE SCAN                    | T1_OBST_OOST_DK_I       |   5012 |      1 |   5012 |00:00:00.03 |
|* 11 |      TABLE ACCESS BY INDEX ROWID          | T1                      |   5012 |      1 |      6 |00:00:00.48 |
| 12 |       NESTED LOOPS                        |                         |   1277 |        |      6 |00:00:00.46 |
| 13 |        NESTED LOOPS                       |                         |   1277 |      2 |      6 |00:00:00.46 |
| 14 |         PARTITION REFERENCE ALL           |                         |   1277 |      4 |      6 |00:00:00.46 |
|* 15 |          TABLE ACCESS BY LOCAL INDEX ROWID| T4                      | 66380 |      4 |      6 |00:00:00.43 |
|* 16 |           INDEX RANGE SCAN                | T4_OBSV_OBST_FK_I       | 66380 |     86 |      6 |00:00:00.28 |
|* 17 |         INDEX UNIQUE SCAN                 | T5_VEH_PK               |      6 |      1 |      6 |00:00:00.01 |
|* 18 |        TABLE ACCESS BY GLOBAL INDEX ROWID | T5                      |      6 |      1 |      6 |00:00:00.01 |
Predicate Information (identified by operation id):
   2 - access("OOST"."CHP_ID_END"="CHP2"."CHP_ID")
   4 - access("OOST"."CHP_ID_START"="CHP1"."CHP_ID")
   8 - filter(("OOST"."CHP_ID_START" IS NOT NULL AND "OOST"."CHP_ID_END" IS NOT NULL))
   9 - access("OOST"."START_DATE">=TO_DATE(' 2013-11-20 00:00:00', 'syyyy-mm-dd hh24:mi:ss') AND "OOST"."START_DATE"<=TO_DATE(' 2013-11-27
              00:00:00', 'syyyy-mm-dd hh24:mi:ss'))
10 - access("OBST"."OOST_ID"="OOST"."OOST_ID")
11 - filter(("OBST"."OBS_STAT"=2 AND ADD_MONTHS(INTERNAL_FUNCTION("OBST"."MOD_DATE"),13)>=SYSDATE@! AND IS NOT NULL))
15 - filter("OBSV"."START_DATE">:B1)
16 - access("OBSV"."OBST_ID"=:B1)
17 - access("OBSV"."VEH_ID"="VEH"."VEH_ID")
18 - filter(("VEH"."ac_number">=1 AND "VEH"."ac_number"<=99999))
Spot how the predicate 17 and 18 are now in the position I wanted them to be i.e probe first the T5 unique index using the join condition and then filter the table T5
But, there is always a but, why am I obliged to hint?
Where did I got something wrong (statistics, optimizer parameter, etc...) so that the CBO did not opted for this execution plan without a hint?
Thanks
Mohamed Houri

Bayer Filter and colour balance.

Hi all.
I have recently been acquiring images using a mikrotron MC1363 camera and LV code 'Grab and save to AVI'. I have then used ImageJ to create a stack of U8 images. My problem then arises in that I need to apply a bayer filter and colour balance to the images. I have been sent a correction matrix by mikrotron and extracted pixel intensities from the U8 images, but am now stuck. I don't know how to use the information accrued to give a debayered image of true colour. Any advice would be great.
Attached is:
Tthe MC1363 manual
The matrices supplied by mikrotron (lupa1300)
An image folder containing:
-A true colour image
-A snap taken using the MC1365 of the true colour image
-Images of the colours red, green, blue, white and black extracted from the bottom right hand image, as u8 jpegs.
Thanks.
Dan.
Attachments:
992-EoSens 3CL-MC1364-65-Manual.pdf ‏795 KB

Hi Danbubbles,
The pixels of the Bayer filter are arranged in a checkerboard pattern on the sensor. There are twice as many green as red and blue pixels in order to mimic the higher sensitivity of the human eye towards green light.
Due to the filter each pixel measures only one color. The two remaining colors are estimated (interpolated) using the eight surrounding pixels. This technique is called Bayer demosaicing or Bayer to RGB Conversion.
http://www.stemmer-imaging.co.uk/en/glossary/5287-Bayer-Filter
As far as I'm concerned there exit different "de-bayering" algorithm, which are different in terms of quality and performance, but in general
0#
you "move" a structuring element - which is like a subset of your input-image - across your input-picture starting at row = 0 column = 0, which is indexing the same pixel in both of your input AND output-image: http://www.mathworks.de/help/images/morph6.gif
1#
then you calculate a new value for this particular pixel in your output-image via interpolating the indexed pixel and its adjacent pixels in the input-image, e.g. like described in this pdf:
http://www.matrix-vision.com/tl_files/mv11/Glossary/art_bayermosaic_en.pdf
2#
then you move on to the next pixel which should be at row 0, column 1
repeat, until you reach the pixel at row n, column m
Regards,
Alex
♜♖ LabView 8.6 - LabView 2014 ♖♜

Graduated filter and Adjustment brush always use "last used effect"

In my workfow I mostly use opposite effects in the Graduated filter and Adjustment brush.
Lightroom maintains "least used effect" even when changing tools.
Is it possible that each tool retains its last used effect?
In my workflow I mostly use opposite effects when using Adjustment brush en gradient filter. Changing the effects wastes a lot of time when editing hundreds of images.

I agree that it would be nice if the individual tools remembered their own last used preset.
Unfortunately LR does not work that way.

Src Addr filter and Dst Addr filter

Similar Messages

Maybe you are looking for