[..\..\Src\Win\WinFile.ccp-754]   Error In Media Encoder CS4!

======================================
Adobe Media Encoder has encountered an error. 
[..\..\Src\Win\WinFile.ccp-754]
======================================
I have paid a small fortune to get the Masters Collection CS4, and after a few months of using it, I get this error for no reason!
It happens everytime I try to encode files in Adobe MEdia Encoder CS4 (Fully Updated) like music, home videos ect to different formats so I can share them with family.
My system: HP Pavilion DV9700 500GB HDD, 512Mb NVideo Geforce, 4Gb DDR2 RAM, Vista Ultimate x64.
Any help would be greatly appreciated!
Thanks
Justin 

I get this error for no reason!
You are wrong. There is a reason. What the reason is, is hard to discern due to lack of information. Look at this link closely, read the included link to the WIKI and reply to the 16 questions asked at the end of the article if you have not yet found the solution with all the steps outlined: Some suggestions

Similar Messages

  • Src/Win/WinFile.cpp-754" error

    I’m using PPRO in Production Premium CS4.
    I’m getting the “Src/Win/WinFile.cpp-754” error” when I AME starts or shortly after it starts. System worked fine since I installed the CS4 upgrade 4 months ago but today a project is due and this happens.
    My system: Dell Precision 690, 3Ghz Xeon processor, 4 GB ram, Internal HDs (1) 300 and (1) 400 GB, External HDs (2) 1 TB.
    I’ve read and searched the forums and now I’m frustrated and in need of some help. Has anyone found definitive solution to this “Src/Win/WinFile.cpp-754” problem?
    Thanks,
    Tony

    Hi,
    I searched the internet with that error mssg and it seems a lot of them have to do with video card drivers. There was some information about matrox drivers and that problem on the internet...
    Also some 'Axio' card driver problems related to that error message...
    Have you recently updated your video card drivers ?
    Rod

  • Premiere Pro (CS6) - Windows 8 - [..\...Src\Win\Winfile.cpp-814] error

    Hello         
    Im currently having some issues with Premiero Pro (via creative suite 6) on a Windows 8 64 bit machine after reinstalling due to an error resulting in the encoding sequence crashing/hanging and remaining on 0% indefinitly
    Video and audio were both taken via the same machine and are both in .MP4 format. The project will render correctly however will not export
    Upon selection of export with match sequence settings enabled I receive the error box saying:
    Premiere Pro Debug Event
    Premiere Pro has encountered an error.
    [..\...Src\Win\Winfile.cpp-814]
    Upon closing the error the screen returns back to the work space. with an error box saying:Error compiling movie - unknown error. After this it again shows the infinite encoding screen.
    I have tried uninstalling the programme and running any updates etc however I am unable to get it to work.
    Would really appreciate an answer to this.Uninstalling and reinstalling is in itself a pain.
    Many thanks

    I can't give direct help with that error, but some reading that MAY help... These notes are (mostly) for Encore, but some ideas that may help
    As well as the below, right click the program icon and select Run as Administrator, which is NOT the same thing as running the computer with the Administrator account, and which fixes several "odd" problems...
    Run as Administrator http://forums.adobe.com/thread/969395 (Encore AND PPro)
    Odd Errors http://forums.adobe.com/thread/670174
    Long File Names or odd characters cause problems
    Read http://forums.adobe.com/thread/588273
    And #4 http://forums.adobe.com/thread/666558
    And This Message Thread http://forums.adobe.com/thread/665641

  • Premiere Pro (CS6) - Windows 7- [..\...Src\Win\Winfile.cpp-814] error

    Hi,
    I'm currently working on an animated music video to upload on YouTube fairly soon and while trying to export my video I get an error popup saying [..\...Src\Win\Winfile.cpp-814].
    I've had no problem exporting before and now this thing comes out of nowhere to ruin my day and my project haha.
    I've resterted the project and the popup still appears. I even went to the extent of going back to Premiere Pro CS 5.5 but I receive  a popup saying  [..\...Src\Win\Winfile.cpp-785]
    ...with another saying "Thank you for using "Adobe Device Control". The Adobe product that installed "Adobe Device Central" has not been activated. Please launch and activate that Adobe product before continuing to use "Adobe Device Central" after it exports.
    And,  when the project  does export, it exports with just the video with NO audio .
    I have never had this issue before, it just randomly happened. I've use Premiere Pro going on 5 years now and have never had an issue until now. Someone or some hero please help me slay this dragon so I may post my awesome music video on YouTube. Thanks

    I found a bug report on this exact crash. The developer's notes indicate that the crash occurs when Premiere gets an unexpected result when checking to see if a file is open. One thing that might work is to reboot the system, thereby closing any files that were basically in a bad state.
    If that doesn't do the trick, then installing PPro CC as a trial should allow you to get around this.

  • Unknown error on Media Encoder (CS4)

    I'm trying to render a movie and every time I get about half way through it crashes saying unknown error..
    Oddly I can render the 1st half of the movie and then quit and restart and render the 2nd half of my movie, but not both together..
    I've tried reinstalling CS4 (totally clean removal and install), duplicating clips and reimporting them, creating new project files and importing old sequences, etc. Nothing seems to work.
    I'm using CS4 (Premiere 4.2.1 and Media Encoder 4.2) on a Mac Pro with OS 10.7.5
    anyone have any ideas?

    Hi,
    Screendump is from CS5.5 but should look simular to CS4

  • Adobe Media Encoder CS4 Error: WinFile.cpp-754

    When encoding video from one format to another (no matter what is source and what is result file format) I have an error after some time or in the begining of the process. "Adobe Media Encoder has encountered an error ..\..\Src\Win\WinFile.cpp-754"
    Version of Encoder is 4.2.0.006 (updated).
    I can't encode any files. What is the problem?

    Any update on this?
    I get WinFile.cpp-754 on CS4 and WinFile.cpp-785 on CS5 trying to encode the same AVI file.
    I'm trying to load a 59.94 fps AVI file into PremierPro CS4 and need to convert it to something else (correct?)

  • Error message [..\..\Src\Win\WinFile.cpp-758]

    i tried to encode AVI video file with media encoder CS5 to MPEG2
    and after it seemed the encoding was done i got this message?
    [..\..\Src\Win\WinFile.cpp-758]
    can enyone help me with this?

    I had the same problem with recently updated Encore (5.01.) Tried shortening & simplifying file names with no luck either. I tried half a dozen things that sometimes work (e.g., refreshing source material, restarting Prmier Pro project from scratch) because of an error I overlooked. Nothing worked. Then, much by accident, I looked at the Media Cache. I had recently shifted the Media Cache to a new 3 TB hard drive that wasn't being used very heavily, figuring I had a lifetime supply of space. Wrong. It was completely filled up, mostly with the Media Cache. I cleared the Media Cache [Edit > Preferences > Media...] and BINGO! The project rendered cleanly.
    Hope this helps.
    Adobe needs to address this issue. The best solution would be to automatically clear out the cache materials associated with a perticular project whenever the project drops off the radar. A minimal solution that should be quick and easy to implement would be to monitor the empty space on the scratch disk and flash a pop-up warning when it was getting too full.
    Addendum, 10 May 2012:
    This one has left me thoroughly confused. Just ran a similar set of files through Encore, cleared the cache first, then good ole 758 again. It took several attempts, but finally it went through. Then I discovered I had forgotten to set something minor in the navigation and had to re-do it. Three tries later, it worked. Phase of the moon, I suppose.
    This is not the first time this has happened - it happens occasionally with other similar files. I have had my best success running Encore when I let it run alone.  It doesn't seem to time share very well with other programs, which is inconvenient because I like to work with Premiere and Photoshop getting the next project ready to go while Encore is processing the current one. Encore needs a batch queue like the one Premiere uses so I could prep the projects in Premiere/Photoshop during the day and then let the Encore queue run overnight. The queue would have to be configured so that if one project failed it would set it aside and move on to the next one.
    Another problem Encore has is hanging temporarily. It doesn't die but just quits responding for a short time. It took me a while to discover that Encore was running but just not responsive to the operating system. I'm a little surprised because I have a fairly fast AMD 6 core chip and lots of RAM (or so I thought) at 16 GB. The gadgets and Resource Monitor tell me that the six cores are frequently using over 90% of the available combines cpu cycles and occasionally most of the available RAM.
    I put in a 256 GB  solid state drive, divided between the o/s and installed programs, leaveing about 120 GB for the files I was processing. The idea was that everything would be moving strictly in solid state. Maybe that speeded the system up too much. Putting in a 120 GB SSD sure made an 8-year old XP box scream though.
    I am looking forward to getting CS6 in the next few weeks - I hope they have these bugs sorted out by then. From what I have seen in the forums, similar WinFile.cpp problems have been in existence since CS4 at least.
    Message was edited by: Retired Spook

  • Exporting AVI clips (error: "[\Src\Win\WinFile.cpp-759]" after 4 %)

    The following problem:
    I have 2 adobe premiere project. both have the same film and film length but different video codecs.
    1. project (low quality video codecs (mpeg4)
    export works fine
    2. project (high quality video codecs (avi)
    export stops every time after 4% with the following error notice:
    "Premiere Pro has encountered an error.
    [..\..\Src\Win\WinFile.cpp-759]"
    or if I want export the project with other codecs, eg H.264 then Adobe premiere freezes and I can close Adobe Premiere then.
    Premiere memory settings (valid for both premiere projects):
    Installed RAM: 3,7 GB
    RAM reserved for other applications: 1,5 GB
    Ram available for Adobe: 2,2 GB
    Optimize rendering for: "Memory"
    computer details:
    system type: 64 Bit
    installed RAM: 3,75 GB
    processor: AMD Athlon, 2 x4 635 processor 2.90 GHz
    graphics card: ATI Radeon HD4200
    windows edition: 7
    How can I solve the problem, so that I can export my whole project in AVI codecs without freezing problems or error problems?
    Is it a hardware or software problem?
    Thanks in advance for your help

    Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link
    Most especially the SOURCE FILE codec used... see Question 1

  • Error message [..\..\Src\Win\WinPathUtils.ccp-553]

    MY PROJECT:
    26 hours of HD footage captured from Canon XH-A1. My system/project specs are:
    - Intel Quad Core Q6600 2.4Ghz CPU
    - 2Gb RAM
    - 4 X 500gb SATA 2 Drives
    - At least 60 GIGS of head room on each drive
    - Windows XP
    - 25P
    - Version CS3 2.0
    When I load up my project this error keeps popping up repeatedly -
    [..\..\Src\Win\WinPathUtils.ccp-553]
    Does anyone know what this means? It is stopping my project from working properly.
    Cheers,
    Jeremy.

    Some troubleshooting tips.
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • AVI clips export (Fehlermeldung: "[..\..\Src\Win\WinFile.cpp-759]") Premiere friert ein beim export

    The following problem:
    I have 2 adobe premiere project. both have the same film and film length but different video codecs.
    1. project (low quality video codecs (mpeg4)
    export works fine
    2. project (high quality video codecs (avi)
    export stops every time after 4% with the following error notice:
    "Premiere Pro has encountered an error.
    [..\..\Src\Win\WinFile.cpp-759]"
    or if I want export the project with other codecs, eg H.264 then Adobe premiere freezes and I can close Adobe Premiere then.
    Premiere memory settings (valid for both premiere projects):
    Installed RAM: 3,7 GB
    RAM reserved for other applications: 1,5 GB
    Ram available for Adobe: 2,2 GB
    Optimize rendering for: "Memory"
    computer details:
    system type: 64 Bit
    installed RAM: 3,75 GB
    processor: AMD Athlon, 2 x4 635 processor 2.90 GHz
    graphics card: ATI Radeon HD4200
    windows edition: 7
    How can I solve the problem, so that I can export my whole project in AVI codecs without freezing problems or error problems?
    Is it a hardware or software problem?
    Thanks in advance for your help
    Ich bin Deutscher. Ich brauche schnelle Hilfe. deshalb habe ich aus dem englischen forum mein eintrag kopiert und hier eingefügt.
    Vielen Dank im Voraus

    Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link
    Most especially the SOURCE FILE codec used... see Question 1

  • Adobe Media Encoder CS4 error

    Hi,
    I've just purchased Flash CS4 and tried the "Adobe Media Encoder CS4" that comes with it.
    When attempting to launch it, I get this (see attachement) error and the program doesn't launch.
    Anyone aware of the cause of this error ? How I could get it resolved etc..
    Thanks in advance.

    Any update on this?
    I get WinFile.cpp-754 on CS4 and WinFile.cpp-785 on CS5 trying to encode the same AVI file.
    I'm trying to load a 59.94 fps AVI file into PremierPro CS4 and need to convert it to something else (correct?)

  • Adobe Media Encoder CS4 error in elearning suite trial version

    Hi there, I have a trial version of elearning suite 2.5 and I have the error "Thank you for using Adobe Media Encoder CS4. The Adobe product that installed Media Encoder has not activated. Please launch and activate that Adobe product before continuing to use Media Encoder". My searching points me to a full reinstall, but is there an easier fix? Currently running Mac OS 10.5.8. Thanks.

    Any update on this?
    I get WinFile.cpp-754 on CS4 and WinFile.cpp-785 on CS5 trying to encode the same AVI file.
    I'm trying to load a 59.94 fps AVI file into PremierPro CS4 and need to convert it to something else (correct?)

  • Adobe Media Encoder CS4 runtime error

    I am wondering why I am getting a runtime error while
    attempting to use Adobe Media Encoder CS4...As soon as I launch
    Adobe Media Encoder CS4, it crashes I have installed and
    reinstalled Flash a couple time, to see if this corrects the
    problem, which it doesn't, and just last week it was working
    fine...Does anybody have a ideal what is going on?

    Don't know if this helps anyone else, bt the runtime errors i have been getting occur when I try to build and burn a blu-ray file. And they happen intermittently. In fact, on this project, I had burned several test blu-rays without difficulty. When I made one minor change on the penultimate version, and tried to burn again, the system crashed with a run time error. Then it crashed 9 more times over the course of the week.
    Finally in frustration, I created an interim ISO file in Encore- ie in the build workstream, i selected burn an image file rather than burning a blu-ray disk. After this intermediate step completed, i then did a separate burn in encore but burned from the image file. No snags.
    Not sure why but this program has trouble doing a sequence of activities. As it is, I already render and save the file before burning. Now I have another interim step to create an image file before burning.
    In my next hardware change, I am going to switch to make Mac and Apple software. Enough of MS Windows and Adobe, the GM and Chrysler of the software industry. Hopefully what my friends tell me is true; that Apple stuff actually works.

  • Adobe Media Encoder CS4 Encoding Error

    I got an error when Adobe Media Encoder CS4 encoding which is the crash of ImporterProcessServer. It crashes the halfway of the encoding process. I restarted my comp and tried several times before but the results still the same. Sometimes ImporterProcessServer did not crash but the encoder failed compiling without any error.
    Processor : Intel Core 2 Duo E4600 2.4GHZ
    RAM: 2GB
    OS: Win7 32bit
    Graphic: Nvidia 8600 GeForce 512 mb

    First thing to check is what is on the Timeline at about the 50% point. Do you have an odd Asset there?
    Do you have a gap in the Video at about that point?
    Then, do you have adequate defragmented free space on the destination HDD?
    Good luck,
    Hunt

  • Media Encoder CS4 No Error No File (Says It's Created, but It Isn't)

    I have tried repeatedly today to encode an QuickTime container to P2 format, and while Adobe Media Encoder CS4 appears to load correctly, do the conversion, and confirm the file creation, I can not find the file that was supposed to be created.
    There is no error message.  Below is the transcript of the log from one attempt:
    9/10/2009 5:38:41 PM : Queue Started
    - Source File: F:…\NASDAQ\0001DI.mov
    - Output File: C:…\Desktop\0001DI_1.MXF
    - Preset Used: DVCPROHD 720p 30
    - Video: 960x720, 29.97 [fps], Progressive
    - Audio: 48000 Hz, Stereo, 16 bit
    - Bitrate:
    - Encoding Time: 00:00:22
    9/10/2009 5:39:04 PM : File Successfully Encoded
    9/10/2009 5:39:04 PM : Queue Stopped
    Only, no where on my computer is there the file “0001DI_1.MXF”.  Not only have I looked in the Desktop folder where it is supposed to be.  I have searched both hard drives on my computer for that file.  This has happened repeatedly with variations of the output file name in the last hour or so.
    I have rebooted the machine.  I have run error-checking on the hard drive. Even though only log into my with my own account and no one else uses it, I have even created a text file with the same name, just in case the file that was created was there but hidden. I had no problem creating the text file in the directory where the output from Media Encoder is supposed to be.
    My suite was fully patched when this was run (except I did install an upgrade to Adobe Reader after this problem occurred when I checked to make sure my software was current).
    I used Media Encoder earlier in the day to create a P2 MXF file from the same source file earlier in the day, and have used it to create other output formats.
    I am working on a Windows XP Professional machine.
    Any ideas?

    Quick postscript that may be relevant...
    I converted the same file I’m having trouble with to WMV format. It worked fine, but the output file name I wanted to give it was long (more than 8 letters not counting the extension). The name of the file created by Media Encoder was only the first 8 letters plus the extension.
    I had no problem manually renaming the file it’s full name (over 20 letters long). It seems Media Encoder couldn’t do that.
    That still begs the question why it didn’t work when I tried to create an MXF file only one letter long. Here is the section of log where I tried to do that. As before, it says the file was created.  I couldn’t find it.
    9/10/2009 5:03:29 PM : Queue Started
    - Source File: F:…\NASDAQ\0001DI.mov
    - Output File: F:…\NASDAQ\a.MXF
    - Preset Used: DVCPROHD 720p 30
    - Video: 960x720, 29.97 [fps], Progressive
    - Audio: 48000 Hz, Stereo, 16 bit
    - Bitrate:
    - Encoding Time: 00:00:26
    9/10/2009 5:03:56 PM : File Successfully Encoded
    9/10/2009 5:03:57 PM : Queue Stopped

Maybe you are looking for