Src/wwu directory does not exist

Chapter 3 of three of the Single Sign-on Administrator's Guide (Rel. 3.0.9) refers to 'ssoexp.csh' in the "src/wwu directory in
which Portal is installed". What are they talking about?
I found an "ssoexp.csh" in ".../Portal30/admin/plsql/wwu" that I am going to use.
Does this mean my Portal install was done wrong? Or is the documentation off?
TIA

Hi,
I tried to change the directory for DIR_TRANS but I encountered the error directory does not exist. The directory is something like that
switest\sapmnt\trans. Anything went wrong?
Ideally the share
switest\sapmnt points to the location <drive>:/usr/sap/
Taking your case , sapmnt should point to
switest\<Drivename>\usr\sap.
So will be need to ensure that this location is shared as sapmnt and you have created a folder trans under this location.
Hope this helps.
Regards,
Deepak Kori

Similar Messages

  • ERROR: Cannot start mail services, configuration directory does not exist

    I'm running an Xserve G5 with one internal boot drive and one RAID using the other two internal drives. I used Apple's Disk Utility to set-up the RAID.
    Back in early December, I moved my mail database and mail store to the RAID. Ever since, when I restart the server, the mailaccess.log generates the following error:
    Jan 23 18:51:33 mail master[47]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/RAID/mail.data/db
    I'm speculating this is a timing error that gets created when Postfix initially can't find the RAID. Then, it must try again and find it because the error message does not repeat and mail starts running.
    Is this something to worry about?

    Hi Joel,
    You're right, it's a timing issues. The mail system is ready for work before the file system is mounted. It's benign.
    Jeff

  • Import Error: The root directory does not exist

    Hi,
    I have some isuuses with importing the extended page. When I try to Import it throws an error.
    Root Directory does not exist.
    I am using the following command.
    import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
    Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
    Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
    G":
    Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
    Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
    Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
    "Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
    abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
    be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
    mRN" because it violates scope restrictions.
    Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
    nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
    kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
    nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
    ause it violates scope restrictions.
    The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
    cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
    able style because it is inside "tableLayout".
    The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
    cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
    N" of stackLayout style because it is inside "tableLayout".
    Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
    "Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
    tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
    referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
    ecause it violates scope restrictions.
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Import completed.
    But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
    Could suggest how to solve this problem.
    Thanks
    Prabhat

    Hi Tapash
    while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
    when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
    it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
    my concern is why i m getting this error
    my import command looks like this
    java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
    could u pls suggest some solution.

  • Import Error:Root Directory Does not exist

    Hi,
    I have some isuuses with importing the extended page. When I try to Import it throws an error.
    Root Directory does not exist.
    I am using the following command.
    import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
    Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
    Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
    G":
    Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
    Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
    Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
    "Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
    abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
    be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
    mRN" because it violates scope restrictions.
    Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
    nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
    kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
    nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
    ause it violates scope restrictions.
    The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
    cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
    able style because it is inside "tableLayout".
    The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
    cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
    N" of stackLayout style because it is inside "tableLayout".
    Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
    "Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
    tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
    referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
    ecause it violates scope restrictions.
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Import completed.
    But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
    Could suggest how to solve this problem.
    Thanks
    Prabhat

    Hi Tapash
    while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
    when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
    it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
    my concern is why i m getting this error
    my import command looks like this
    java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
    could u pls suggest some solution.

  • Error in file receiver adapter (Directory does not exist / cannot be create

    I have a NFS reiceiver file NFS adapter with target directory:
    10.128.68.38\arbo2000\UploadPinfos\arbodev
    if I run this line in windows, windows access to this folder.
    Full Error log:
    Receiver Adapter v2123 for Party '', Service 'BS_0000_ARBO_DEV':
    Configured at 2006-04-06 18:08:26 CEST
    History:
    - 2006-04-06 18:08:35 CEST: Error: Message processing failed: Exception: Message processing failed - configuration error in file receiver adapter (Directory does not exist / cannot be created)
    Can somebody help me please??

    Hi Alvaro,
            If your XI server is running on Unix platform then you'll get the access only after mounting 10.128.68.38 this system as a drive. This is equivalent to the windows network mapping.
    Next thing is that once that is done then you can access the path /arbo2000/UploadPinfos/arbodev by mentioning it in your directory path.
    To check whether the above mentioned is the problem then pls do try by doing it with FTP protocol. If it works then for acting as a local directory for NFS you need to mount the drive.
    Cheers
    JK

  • File adapter : Do not poll if directory does not exist

    Hi people !
    I have a BPEL process that takes files as Input messages.
    I use a file adapter to do that.
    It works well but I would like to avoid polling the directory if it does not exist, do you know how to control if the directory actually exists ?
    Here is the File Adapter configuration :
    <jca:operation
    PhysicalDirectory="PhysDir"
    ActivationSpec="oracle.tip.adapter.file.inbound.FileActivationSpec"
    PhysicalArchiveDirectory="ArchiveDirl"
    DeleteFile="true"
    IncludeFiles=".*\.xml"
    PollingFrequency="30"
    MinimumAge="0"
    OpaqueSchema="false" >
    </jca:operation>
    Even if the directory does not exist, the process endlessly tries to poll that directory.
    Thanks in advance,
    Romain.

    I do agree with you that the directory should exist because the adapter was configured to poll on that directory !!
    Nevertheless, I would like to know how to control its existence before polling...
    Romain.

  • Input File repository server Error: The requested directory does not exist.

    Hi,
    Getting following error "The requested directory does not exist." for Input and Out put file repository server.
    The specfied directory exists and the user has local administrative privelges with full control of the IFRS and OFRS location.
    The location was earlier working and after trying to implement Windows AD the things stopped. Have tried reverting the things but the following issue still persists.
    Thanks,
    Manpreet

    @Siva,
    I am not using the defacult FRS, I have specfied a specfic location on which the user has full control.
    this was working prior to the Windows AD setup tried by me.

  • Error when trying to install the adobe creative suite exit code 39.I get the following error message Directory does not exist : /Applications/Utilities/Adobe Application Manager/DECore/DE6/resources/uninstall/Uninstall Product.app

    i have run the adobe cleaner , repaired disk permission and also tried to download and install several times.
    this is a mac osx running the yoshmite
    please help
    this is the error
    Exit Code: 39
    Please see specific errors below for troubleshooting. For example,  ERROR: DW042 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 2 error(s)
    ERROR: Directory does not exist : /Applications/Utilities/Adobe Application Manager/DECore/DE6/resources/uninstall/Uninstall Product.app
    ERROR: DW042: ARP Entry couldn't be created for language : en_US

    Oliviat14nov does /Applications/Utilities/Adobe Application Manager/DECore/DE6/resources/uninstall exist on your computer? 

  • Deploying custom page to MDS respository: The root directory does not exist

    Hi,
    with XMLImport, I have
    java oracle.jrad.tools.xml.importer.XMLImporter /u01/jdevhomes/sjallerat/jdevhome/myprojects/technip/oracle/apps/xxepc/deploying/webui -jdk13 -mmddir "/u01/jdevhomes/sjallerat/jdevhome/myhtml/OA_HTML/jrad" -username apps -password venus -rootdir /u01/jdevhomes/sjallerat/jdevhome/myprojects -validate -dbconnection "(description = (address_list = ( address =(protocol = tcp)(host = xxxxxxxxxxxxxxxxx)(port = xxxx)))(connect_data = (sid = xxxx)))"
    Importing /technip/oracle/apps/xxXXX/deploying/webui/EpcTestMessagesPG
    Error: The root directory does not exist.
    xxXXX is new. With existing app, add one module .xml is OK.
    Thank you for yor help.
    Serge

    We have registered XXYYY as a new application in our instance of oracle application with a basepath = XXYYY_TOP.
    And add in Linux's file xxxxxx.env the declaration : XXYYY_TOP with rootpath = /xxxxxxx/oracle/xxxappl/XXYYY/11.5.0.
    Let us must be made another statement in another file?
    Thank you.

  • ELoad Message Webpage Dialog - Repository root directory does not exist ...

    I get the following eLoad Message Webpage Dialog message:
    Repository root directory does not exist or is inaccessible:
    Repository:QC Scripts
    Directory:\\kocfs01\Collaborate\Ingenium Imp Study\PRIDE\QA\QC Phase II - Client Fraternal\e-Tester Scripts
    (messag id=repos.missingRootDir)
    Everything was fine a few dys ago.
    How do I fix this?

    The problem was due to a 'canceled' user id in the 'Services" Log On As field. Once a valid user id was entered and the services restarted, eLoad opened without the Repository root directory Warning message

  • ~/oradiag_$USER/.. and "Directory does not exist for read/write" issue

    Hi.
    Recently I've discovered that ADR was creating a folder in one of ours Oracle 11.2.0.1 server, in the users home like ~/oradiag_$USER/.. The problem is that this logging files dont stop growning, and they are filled only with this lines:
    Wed Apr 11 13:40:06 2012
    Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
    Wed Apr 11 13:40:06 2012
    Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
    Wed Apr 11 13:40:06 2012
    Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
    Wed Apr 11 13:40:06 2012
    Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
    Wed Apr 11 13:41:06 2012
    Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
    etc
    I've searched around internet about this issue all that I've found is a "workaround" by creating those folders. And yep, it works, it stops growning.
    Then I checked the others servers that we have, and the problem replicates in some servers with the same Oracle version.
    My question is: Why this? Why in some servers ADR is looking for that folder? That folder didnt exist in any of them, but only some servers tries to read/write on it (or, at least, log it) What parameter relies on it?
    Regards.

    Metalink note
    11g Sqlnet Log Shows Error "Directory does not exist for read/write" [ID 797678.1]
    Errors Filling log.xml and sqlnet.log: Directory does not exist for read/write [opt/oracle/oemagent/agent11g/log] [ID 1291286.1]

  • SSPU issue: Cache directory does not exist, and couldn't create a new downl

    I have installed SSPU and created an offer over there. When I run my offer it gives the error:
    Cache directory does not exist, and couldn't create a new download cache directory.
    Can anyone tell me the root cause and workaround for this issue?

    Hi
    Try deleting the "offer" directory from SSPU home and then delete the offer from Sub-Client . Restart client and then add the provider . Start pushing the content from SSPU and see if the issue still persists .
    Thanks
    Srinath

  • ADAWS Webapp Directory Does Not Exist

    Hello,
    When I do the test (Security Settings) by the URL http://localhost/adaws/install/writeFiles.aspx I have the following error: "ADAWS Webapp Directory Does Not Exist."
    Someone knows what are happening?

    Tech support told me:<br><br>
    "We have bug #60365 filed on this issue. The version number in WriteFiles.asp.vb is hardcoded to '6.2' and It will look through pthome.xml for this version of ID-AD and not find it. As a result, it will throw the 'Directory Does Not Exist' error. "<br><br>
    Basically, just ignore the diagnostic error as the remainder of the app is unaffected by it.

  • The Specified Directory Does not Exist

    Hi expert
    could you help me with my problem , this word " The Specified Directory  Does Not Exist" its some stupid question , isn't it ?
    this is my sitiuation    :
    1.  BPC version is SAP BPC 5.0.512
    2. we are using  MS Excel 2003
    our user  do some modification from BPC  WEB (the BPC open excel file with many macro and add-in etc ...  ), then user save using Save Dynamic Template  sub menu from eTools menu , and raise message "The Specified Directory Does not Exist < directory path>/eEXCEL. "
    the questions Are .
    1. Could anyone explain why BPC try to save in Client Local Direcory not is BPC Server 
    2. Could  anyone help me how to resolve the problem ?
    (i am appolagize with my bad english )
    thanks.

    HI nvsleman ,
    I had the same problem and I manually copied the eExcel folder (on my local harddrive) from a working application to the application in question.
    Hope this helps
    Sabine

  • Specified directory does not exist

    Hi there,
    I'm having a wierd problem, and can't seem to find a way around it.
    I'm logging into my clients' version 5 SP10 application, and the "Finance" app works fine: all dimensions downloaded, all folders created locally, etc (today is the first day I've used my PC with this appset so I didn't have these locally previously).
    However, when I switch to my "interco" app, or any other, I get this error (NOTE: my user profile folder is on D not C):
    "The Specified directory does not exists: D:\Jason\Documents\Outlooksoft\<Server Name>\<User>\App Info\<Appset>\<Application>\eExcel"
    Sorry, not very easy to read!
    It doesn't seem to create these folders. But if I do it manually (through My Computer), the next time I log in I don't get the error - presumably because the folder has been created.
    My colleague has the exact same problem from the exact same application set, and we are using different Windows OSs (he is on XP and I'm on Vista) so it can't be that.
    Any ideas? I have worked at this client many times, but not since SP10 was applied - could that be the cause of the problem?
    Thanks as always!
    Jason

    Jason,
    I had the same issue with a few applications. SAP tech advised me to copy an application and it should re-create folder structure. Another approach is to process application without selecting any options - should also re-create folder structure, but I can't confirm this one.
    And 3rd way is to copy folder structure from a good (working) version of the same application into the "broken" one.
    Hope that helps,
    Akim

Maybe you are looking for

  • How do I get a sum of cells for rows that contain a text in a drop down menu?

    I am trying to track individual sales with each of my vendors. I have a column of drop down menu's that list each of my vendors. I am trying to associate a dollar amount for a single transaction in a row that is associated with a vendor and get a sum

  • Automatic red eye correction

    How canI disable automatic red eye correction?

  • WRVS4400N xbox360 IP address not assigned

    The xbox360 connects to the wireless wrvs4400n signal and the USB bridge light is green.  WEP and SSID are correct.  Other laptops at home connect wirelessly with DHCP just fine. Tried manual IP and that failed, too.  I noticed the wrvs4400n is not l

  • Dbms_scheduler gives error when setting up notifiactions

    Hello, I'm using XE 11.g and SQL Developer 4.0 on a Windows 7 platform.  I have a package associated with a job.  I set it up using the Job wizard in SQL Developer 4.0.  The job is executed weekly, as defined the schedule.  All of this works well. I

  • Rtp video streaming issue from linux to windows

    i am currently running a windows machine and linux machine on the same network connected by a linksy wrt45g router. i am trying to use avtransmit2.java and avreceive2.java to stream a video from one computer to the other and i can't get it to go from