SRM 07 Live Action

Dear Expert,
I am starting to work with the SRM 07 Live Action.
I can enter to the Live Action after I published the Action.
Can someone tell me how to create password to the bidders I added to the auction?
How can I create the URL for them?
Can they enter the action using regular internet Access?
Thanks,
Yaron

Hi,
You will have to have the vendors in the SRM vendor organization, and also create contact persons to these vendors.
So when you create contact persons you will have a su01 user with bidder role associated with it, hence for the same su01 user a portal user with bidder role has to be created.
Once the live auction is published the bidders have to login to the portal with above user and access the live auction.
Regards
Sam

Similar Messages

How to add live action video to the timeline in Adobe Flash CS5?

Hi, I want to make an animation over live action footage, I've looked on the guides and the ones which explain what I need to do are for previous versions of Flash and don't work on CS5.
I'm wondering how I can import a video in to Adobe Flash CS5, so that it plays in the timeline frame by frame? I dont mean putting it on one frame so it will play, but so i can edit objects over the top of the flash in each single frame
Thanks.

So are you saying that you cannot embed the video directly into the main timeline (I don't use CS5) as you could with earlier versions?
Overall I wonder if you are using the wrong tool for the job. Flash is not a video editor and attempts to use it as such often fall short. Adobe After Effects or even a simple video editor may work better:
http://www.adobe.com/products/aftereffects.html
If that is not an option... how about
.... embed video directly into main timeline... or
... convert video file to .swf, then import .swf... extending timeline as needed..... or
... if vid is short, do frame grab for each frame, save as bitmap, import the series of bitmaps, place them on layer below animation... or
but to keep the video synced to the animation, you'll need to set the Flash doc frame rate to exactly the same as the original framerate of the video. For example, if shot in mini-dv format, the frame rate of the video is 29.97 so the Flash doc frame rate would need to be 29.97 also.
Best of luck,
Adninjastrator

Can I video capture 'live action' from Viewer screen ...

Can I capture 'live action ' video as it appears on the 'viewer screen' in iMovie as I move the cursor across the 'source video' clips. Does iMovie allow me to record this 'action' to hard drive ?? ... Suggestions greatly appreciated.

it is this 'rapidly changing 'still' images' as it appears in the 'viewer' that I want to record.
You could use a screen capture application like Snapz ProX to capture the "preview" window as it is either playing or being "scrubbed." On the other hand, if you have QT Pro, you could also export the original source clip as a sequence of still images (image frequency can be selected by the user) to a folder and then simply open the "Image Sequence" using QT Pro to create a motion clip with a user selected frame rate for viewing. This approach would provide a more even playback than a screen capture of a "scrubbed" playback which depends on how fast and steadily you "scrub" the file.

Hiding com.sap.pct.srm.core.action.oldwfl.approve button in UWL InBoX

Hi,
Currently I am working on SRM upgrade project . How to remove/hide approve button in UWL inbox.
Below xml code, using in UWL configuration file in portal:
<ItemType name="uwl.task.webflow.srm.TS90000005.SAP_SRM" connector="WebFlowConnector" defaultView="com.sap.pct.srm.core.view.tasks" defaultAction="com.sap.pct.srm.core.action.launchWD.oldwfl.cont.approve" executionMode="default">
<ItemTypeCriteria systemId="SAP_SRM" externalType="TS90000005" connector="WebFlowConnector"/>
<Actions>
<Action reference="com.sap.pct.srm.core.action.launchWD.oldwfl.cont.approve" />
<!<Properties><Property name="display_order_priority" value="uwlExcludeFromPreviewDetail"/></Properties></Action>>
</Actions>
</ItemType>
Implemented " uwlExcludeFromPreviewDetail" code in xml, but it is not working. Pls guide, how to tweak the properties definition a little bit to get it to work.
By removing approval reference in xml code, approre button and inbox hyperlink both functionality disappear. As per my requirement, Inbox approve data should have hyperlink as it is and approve button should be disappear/remove/hide.
Otherwise without hyperlink, user has to select any workflow item and click "Details" button. For this need xml code for enabling Details button
Anybody light on this

Hi,
Remove the Approval action from the XML by deleting <Action reference="com.sap.pct.srm.core.action.launchWD.oldwfl.cont.approve" />
Also on this, <ItemType name="uwl.task.webflow.srm.TS90000005.SAP_SRM" connector="WebFlowConnector" defaultView="com.sap.pct.srm.core.view.tasks" defaultAction="com.sap.pct.srm.core.action.launchWD.oldwfl.cont.approve" executionMode="default">
change the defaultAction="viewDetail" to enable the hyperlink which will open up the detail if click on hyperlink. If you need to open up the details in SAP GUI (ITS), change the defaultAction="launchSAPAction"
Hope this helps.
Jigar

Matching part of a live-action footage with 3d perspective

Hi!, just a simple trouble... hope so...
I have a live-action footage showing the stage of a theater from the stage perspective. The stage has two parts, one lower than the other. The footage has no movement, the only thing i need to do is moving up the lower level, to match the upper level. I've been trying to do it just by 'eyeballing it". I duplicated the layer, mask the lower level, activated the 3d box in the layer, and tried to make the effect just by make keyframes and combining position and x rotation. But i just painful.. i just dont get it...
link http://www.freeimagehosting.net/image.php?6ff086661b.jpg

Hi Craig, i've been trying to shift up the layer, with a mask, the problem i'm having is that doesnt match the perspective of the frame, and when i try to softly rotate the layer as is goes up, its just doesnt look real. The idea is make a bigger bottom layer by precomposing and painting/cloning/stretching, so when its moved on 3d near to the horizon line i still have visible floor, thanxs anyway?

Filter for turning live action into animation?

Is there a filter that will turn live action into art the way you can with Photoshop on stills?

Can you provide a little more info on this desired filter please?
A screen shot perhaps.
Al

SRM Live Auction - java version in vendor side

Hi experts
I work with SRM 7.0
In order to use SRM Live Auction What is the minimum java version
that the supplier need to download in his computer.
Almog

Issue resolved by keeping the IE Privacy settings to low level.

Triangular poly filter for live action?

Is there a filter that yields a triangular poly look to a live action clip with the polys following the natural contour of the imagery...similar to a low res 3D render?

It would be fantastic if someone cracked that, would it not? No, short of experimental 3D reconstruction software or things like the various Kinext experiments there is no such software that I'm aware of and even if there were, to get a proper polygon flow you'd need more than one view. Y'know, self-intersections and other ambiguous situations that won't work from just one fixed angle...
Mylenium

Surrogate bidding in SRM Live auction

Hi,
While doing surrogate bidding in SRM live auction, system gives following error,
"You are not authorised to display the auction"
What settings are required in customisation to bid in live auction on the behalf of supplier?
Thanks a ton
Regards,
NB

Proxy bidding enables the system to automatically bid on a bidders behalf, promoting competitive bidding by allowing bidders to more easily monitor the auction, since it is not necessary for them to enter bids manually.
ARE YOU WITHIN THESE PREREQUISITES?
a.) Proxy bidding can only be enabled for auctions that use the overall best bid validation.
b.) Proxy bidding can only be enabled if bid decrements greater than zero have been defined on all line items.
c.) Proxy bidding is not available in auctions with lots.
When proxy bidding is enabled, bidders submit a minimum bid to indicate the lowest they are willing to submit for a line item. The system then acts as a proxy agent and rapidly bids on line items on the bidders behalf during the auction, placing bids according to bidding parameters such as next valid bid, bid decrement, and reserve price to maintain the bidders leading position in an active auction until the auction ends or the minimum bid is reached.

Live action in flash

I have to do a project for a course in flash animation, and I
was wondering if it was possible to do a live-action movie in
flash? If so, how would you import the live video to flash? Oh,
and, more specifically, this all has to be done on Flash 5.
Thanks for the help!

Flash 5 OMG

Importing 3D objects to animate within live action

Regarding motion tracking, I'd like to import a 3D model of a robot and interact it with live action characters in a scene. Nothing too complicated - it hovers around but, it needs to be in 3D space for realism. What I've read of tracking, I can put an object in a scene and lock it down through camera movement and such. I would imagine the rotobrush tool will come in handy for this process. I just haven't wrapped my brain around how to animate this robot in a scene where the camera may be moving. Any suggestions?

3d tracking a scene is never "nothing too complicated".
The most important step is having a good script.
Other steps following that will include planning, storyboarding, shooting the scene (with enough tracking markers - or trackable elements - in the right places in the shot), shooting a clean plate (also, take the chance to grab some ambient room noise for your audio editing later), and shooting an HDRI - note: this is not an all-inclusive list.
That was all just pre-production and production.
Steps in post would include tracking the shot, modeling the 3d elements, texturing the 3d elements, lighting the 3d elements, animating the 3d elements, rendering the 3d elements and their various passes (object buffers, ambient occlusion, shadows, lights, motion vectors, depth pass, etc.), compositing your 3d elements into the scene (which will involve color correction and may or may not involve keying, rotoscoping, and other techniques - you'll figure this out during the planning stages), rendering out your composite in a proper intermediate codec, bringing your final shot into your editing program, adding sound design, color grading, and producing a finished file in the correct delivery codec. Again, there is more to it than this, but these are some of the basic steps.

Cannot superimpose graphic over clip of live action

I did this before so I know I am missing something.
I am trying to superimpose a LiveTitle graphic over a live action clip. I keep getting the prompt that I cannot due the edit and to check my video tracks. I am trying to slow down the speed of the LiveType graphic clip and it does not seem to be working. Anyone have any ideas on how I can solve these two problems? Thanks.

You slow down the LT animation inside the LT project. Stretch out the animation and make the text longer. Import the LT project inti FCE and drag it from the browser into the timeline onto the track above your video.

Two par biddig and live action for sinle document

Hi,
I have a requirement for a sngle shopping cart at the time of sourcing is it possible to carry out live action process and bidding (RFx process) simultaneously for single shopping cart document.

only one JAy is correct.
SC Item will not agian appear in the cockpit once it was converted to next follow on docuement and Object links are created.
OR
You can create an auction by converting an RFx into an auction. This enables you to process converted auctions more efficiently and use bids copied from an RFx to drive competitive bidding. You can choose to copy full-quantity bids without attributes from the RFx to the auction; only valid bids created for the current external version of the RFx are transferred during conversion.
Muthu

Rotoscoping and live-action animation

Is it possible to do rotoscoping and live-action animation in iMovie? This type of animation was used in the "Take On Me" music video by a-ha in the 80's and more recently in the Charles Schwab commercials and the movie "A Scanner Darkly" starring Keanu Reeves and Winona Ryder.
iMac 1.8 Ghz PowerPC G5 Mac OS X (10.4.8)

welcome SCD to the  boards of discussions...
iM is a consumer video edit app... import some minutes of miniDV camcorder stuff, edit it - done...-
such elaborated effects as rotoscoping are for sure NOT supported... these are domains of the Big Guys as Final Cut (I'm using FCElements for the "special effects" in my homemovies...) or $$$$ Motion, After Effects etc.pp.
they main need to do such effects is a second video-layer.. which iM doesn't support...-
the "poor-man's effect machine" is the combo of a grafic app + QTpro... that will allow to convert a bunch of handpainted pics into a solid dv-stream for iM... I did that for my lil' StarWars project I made for my son... (which reminds me to finally finish the making_of website < slapping own forehead .. > )
another, excellent tool for rotosoping is
http://www.istopmotion.com/
.. the "onion-skinning" allows perfect precision ...

SRM Live Auction Applet

Hello SRM Experts,
We having SRM 5.0 classic scenario and LAC WPS 5.0. I created a Live Auction and the status are Ready, Aktiv, Published and Complete. I have also a LA session number, but when I use the Link "Live Auction" in AUC/BID Screen I got following Applet error message.
+Service cannot be reached
What has happened?
URL http://bitb72.sap.bitgv.de:8000/sap/bc/gui/sap/its/_accessibility=0 call was terminated because the corresponding service is not available.
Note
The termination occurred in system B72 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:bitb72_B72_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team+
In the next step I was using the Live Auction Applet Smoke Test. After enter the Auc session number and the purchaser`s user name and password the message "Auction cannot be viewed in current status" appears in Pop-Up Window.
When I enter the Bidder´s user name and passwort the message "Your are not authorized to display the auction" appears in Pop-Up Window.
The Roles are like following:
Purchaser:
SAP_BBP_STAL_OPERAT_PURCHASER
SAP_EC_BBP_EMPLOYEE
SAP_EC_BBP_OP_PURCHASER
Bidder:
SAP_BBP_STAL_BIDDER
SAP_EC_BBP_BIDDER
I have no idea what the issue is. The smoke test looks fine all tests are on green light. Maybe there is a problem with vendor-BP-Bidder Relationship.
Thank you very much for your answer in advance.
Kind Regards
Axel

Hi
Please refer to the following SAP OSS notes ->
Note 687840 - Live Auction does not work after JAVA patch via SDM
Note 670992 - Patch for LAC WPS 1.0
Note 669562 - Live Auction 1.0 - General patch deployment procedure
Note 998201 E-Sourcing Enterprise SRM Java Server 4.2 SP3 Release & Info
Note 998099 E-Sourcing Enterprise plus Contracts 4.2 SP3 Release & Info
Note 814201 Quot submission despite deletion from bid invitation (2)
Note 36677 Structure of components for customer messages
Note 730403 No notification of ban to banned bidder
Hope this will definitely help.
Regards
- Atul

SRM 07 Live Action

Similar Messages

Maybe you are looking for