SRM 5.0 as an Add on with ECC 6.0

Even i have the same question on how we would manage the distibution model when the SRM System is installed as an add on with ECC. Since being on the same client here are some of the Questions. I have also opened a new thread on this.
1.) How would the distribution model be distributed when on the same client?
2.) How would the Documents flow between two different systems?
3.) In an SUS-MM scenario, how would this be handled when installed on the same client?
4.) How would material and vendor replication facilitated?
Any thoughts would be highly appreciated !!
Thanks,
Sundeep

Hi Sundeep,
I have answered for vendor replication here :
One Client Solution
For product category, material and material type replication, this is same process through activation of relevant objects in table mdsv_ctrl_opt_a
Then you have to trigger the replication through mds_load_cockpit
For SUS, you have to select SUS_ONE (instead of EBP_ONE) in table bbp_backend_dest
That all what i know so far
Kind regards,
Yann

Similar Messages

SUS-MM Lanscape with SRM 5.0 as an Add-on with ECC6.0

All-
We are implementing SRM 5.0 as an add on with ECC 6.0. We are aware of all the constraints and those constraints do not matter within our scope. The open question that we have is that if SRM is installed as an Add on with ECC.
Can we also leverage the SUS-MM functionality within SRM, when installed as an Add on with ECC 6.0??
Any help would be appreciated.
Sundeep

Marcin,
FYI
http://help.sap.com/saphelp_erp2005/helpdata/en/index_srmaddon.htm
Sundeep

SRM 5.5 as an add-on on ECC 6.0 vs SAP SRM 5.5 server

Hi
Are there any limitations if we go with SAP SRM 5.5 Server as an add-on on ECC 6.0 compared to Implementation of SAP SRM 5.5 server on its own.
FYI-We just have one ERP Back-end system.
BTW, what is the difference between SAP SRM server 5.5 vs SAP SRM server 5.5 Plus.
Thanks in advance.
Thanks & Regards,
Anji

Hi
Summary:
You can use classic scenario in Add-on.
You can use self-service procurement and SUS in Add-on.
You cannot have Sourcing and other scenarios.
No migration from Add-on to Separate server available.
Best regards
Ramki

SRM 7.0 EHP1 integartion with ECC

HI,
We are currently using EHP4 of ECC and upgraded our SRM system from 5.0 to EHP1.
What is the min version reqt for integration SRM 7.0 EHP1 with ECC??
I read somehere that SRM 7.0 EHP1 cannot be integarted with ECC lower than EHP5?can someone confirm?

Hi Ricardo,
Thanks for the response!
It is recommended to have SRM 7.01 with ECC EHP4 (at least) to get the maximum advantage of integration part of SRM and ECC system. With these combination, you can create central contract via ESOA services and distribute the contract to R/3 backend system.
-->By SRM 7.0 .1 do you mean SRM 7.0 EHP1?
Can you also confirm if all features of ECC EHP4 are part of EHP5?(EHP4 is subset of EHP5)
We are currently on SRM 7.0 and are planning to upgrade to EHP1.However on the ECC side,we have all business functions needed in both EHP4 and EHP5.Considering this,would it be advisable to anyways upgrade SRM to EHP1?
Also by upgrading to EHP1,my undesratanding is that we only activate the scenario specific switches in the system..is that true?
Please advise.

Vendor Migration issue for SRM as add-on to ECC

Hello Experts,
I am working on SRM as add-on to ECC.
When I am trying to migrate vendors from ECC to SRM using MDS_LOAD_COCKPIT. Within monitor, all queues are 'green' indicating that data has successfully migrated to SRM.
But when I check vendors in trx- ppomv_bbp, i don't see any vendor being migrated from ECC. Neither the BPs are crated for these vendor masters.
I have configured all necessary configuration- i.e.
1) I have carried out necessary settings in tables-
mdsv_ctrl_opt_a
crmc_but_call_fu
v_tbc001
2) In addition, I have maintained backend Purchase Org in PPOMA_BBP.
3) I have checked RFC connections, definition of logical systems and
it seems to be alright.
Can anybody please guide if I am missing on any config or can point
me in right direction to investigate??
At SRM GUI, I tried making a local vendor using 'BBPMAININT' but end up in a short-dump.
Can you please help?
Thanks and Regards,
Amit

Hi,
if you problem is still existing, following might be possible solution. Try it.
Maintain Table BBP_MARKETP_INFO with corresponding Vendorroot ID (ex. VG50000....) that you already created in the PPOCV_BBP trx.
Hope it helps.
Regards
PM

Central contract in SRM 7.0 with ECC 6.0

Hi
We are using SRM 7.0 with ECC 6.0
When we create contract in SRM 7.0 & Trying to distribute to Backend as Contract, It is showing error in BBP_PD as below
HEADER I1015 Awaiting Approval
HEADER I1021 Created
HEADER I1038 Complete
HEADER I1141 Released
HEADER I1180 Document Completed
HEADER I1193 In Distribution
HEADER I1195 Distribution Incorrect
0000000001 I1143 Item is Active
Badi BBP_DETERMINE_LOGSY is activated to define backend system
No IDOC is also generated.
No errors in MOnitor also
Not sure what is message type needs to define & what else is needed
Regards,
NNK

HI
Need to do following
1. Keep conidtion types in ECC & SRM same for contract.
2. Also Add message types BLAORD & COND_A manually in ECC in WE20.
Then only it works
Regards,
NNK

General Understanding SRM as Add-On to ECC 6.0

Since I checked in this forum there is no configuration guide for SRM as Add-On available I have some general problems. Does SRM Add-On as single client installation with ECC 6.0 require replication and download of data objects and do I have to maintain the middleware parameters? If it is like this I understand why tere is no specific configration guide for SRM as Add-On!
In Detail:
When I configure SRM as Add-On do I have to replicate objects like product, product category, customizing (UOM), vendor from the backend as in stand alone implementation?
Do I also have to replicate organizational structure via report from the backend or can I use the organizational structure form the backend directly for the SRM?
Do I have to download the locations from the backend?
Rgds.
Dieter

Hi
ECC 5.0 does not come with EBP or SRM. ECC 6.0 (ERP 2005) comes with SRM Server as an add-on. Only self service procurement and supplier enablement scenarios are supported. Not recommended for sourcing scenarios and multi-backend deployment options.
<u>Please look at http://help.sap.com/erp
Then click on SAP SRM for ERP.
you will find very good documentation here.</u>
<u>Please go through these detailed pointers for more information -></u>
http://help.sap.com/saphelp_srm50/helpdata/en/43/028c9ce2a35158e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/index_srmaddon.htm
What is hub deployment?
Re: SRM as ADD On in ECC6.0
SRM@ERP2005
Re: SAP SRM - ERP INTEGRATION
Re: SAP R/3 MM and Electronic external Catalog
SRM Server as an Add on to ERP 2005
SRM as an add-on to ERP 2005
Hope this will definitely help.
Regards
- Atul

Add Item "With Free Description" in shopping cart

Hello Everyone,
We have the following requirement in SRM 7.0.
During creation of a Shopping cart, we use "Add Item with Free description" to add a new item
When we click "Add Item with Free description" a pop up appears, and in this pop we needs to be updated with a new field called Supplier Product Number which is already available as a standard field in Item Data Tab of shopping cart when we click on Details button.
Requirement is that, customer wants to enter this Supplier Product Number in this pop up screen along with item details, rather than entering it at item data tab. Could anybody suggest me the steps how to achieve this and also once the Supplier Product Number is entered in the Add Item with free description Pop up screen, it need to be synced and should appear in Item Data tab of shopping cart.
Regards,
Venkat

Hi Venkat,
This would require modification of the guided application framework view V_SC_DOFC_I_DESCRIBE to add a new field to the Window, please then check the WD ABAP Documentaiton for details on mapping this new field name to the supplier part number in the shopping cart, I would suggest however to simply fill it in after the fact, the pop up is designed to provide the minimum amount of information required to create the shopping cart, as supplier part number is not a required field in SRM, it is not available in this view. See below for details of the modification point:
Application: /SAPSRM/WDA_L_FPM_GAF
Web Dynpro Component: /SAPSRM/WDC_DODC_SC_I_DES
Window Information: IV_L_FPC_POPUP
View Information: V_SC_DOFC_I_DESCRIBE
Configuration ID: /SAPSRM/WDCC_SC_I_DES_WIZARD
Regards
Jason

Advantages and disadvantages for SRM on one client with ECC

Dear SAP gurus,
We are evaluating the use of SRM on one client with ECC. Is there a paper spesifally discuss the advantage and disadvantages of having this deployment option?
Best regards,
John

Hi
check this link
SRM Server as an Add on to ERP 2005
Advantages
1) one backend for SRM and ECC6.0
Disadvantage
1.Sourcing scenario cannot be implemented.
2.It does not support multiple backend system.
Regards
G.Ganesh Kumar

SUS when SRM is add-on for ECC

Gurus:
Did anyone implemented SAP Supplier Self-Service when you have SRM Add-on in ECC (SRM One Client Scenario)?
Any help is well appreciated.
Regards,
Vijay Alisetty

In a security point of view the production SUS should stay in a independent server. I think that you have to see this with the security team. The vendor's companies are going to do log-on in your SUS system (via web).
Two years ago, analyzing SRM versus SRM add-on SAP told us that materials with MRP are not supported with the add-on so the company decided to do not use the SRM add-on. SAP told us that contract management is not supported also with the add-on.
We did not use the SRM add-on for other motives (MRP). Did you asked SAP his advice using SUS with the add-on.
Hope to help you.
Marta

How is the integration with ECC in SRM 7.0??

Hi,
Working with SRM 5.0 or 5.5 the use of XI for integration with ECC is not mandatory because when we send any document from ECC to SRM like requisitions (to convert them in shopping cards) or when we send any document from SRM to ECC like shopping cards, PO´s, contracts, we only use the RFC´s and the abap programs.
Is the same behavior with SRM 7.0?????
Could the integration from SRM 7 with ECC 6 work with RFC´S without XI or for this vertions is XI mandatory?????
Thanks

SRM70 is closely integrated with XI for transferring docs between ECC and SRM. SAP introduces eSOA tech nology with SRM70 and hence all documents like PR from ECC to SRM, Central Contract from SRM to ECC, PO creation (Classic), etc uses this techn ology.
Thanks,
Jagadish

Known issues for OBIEE Office Add in with Excel 2007?

Hi,
Does anybody know if there are issues for the office add-in with Office 2007?
i'm playing around a little bit to see how it works, but it seems that Excel interferes with the layout.
I do get different grafs and also i tried the tutorial with the excel template and my changes come only partly through.
Thanks
Sandra

Hi Sandra,
Were you able to use OBIEE Office Add in with Excel 2007? I am planning to look at this compatibility. I am looking here to seeif anyone found issues with this setup..
Thanks,
Bharat

Error while installation of Java add-on with EP on ABAP

Dear All,
We are trying to install java add-on with EP on present ABAP system, but getting struck up with error as below at creating java users (sapjsf) in central instance installation phase.
ENVIRONMENT:
ECC6.0
WIN 2003
KERNEL 136
SUPPORT PACK LEVEL AT 13
NETWEAVER 2004S SR1.
DB- ORACLE
error: ( usercheck.log)
java.lang.NoClassDefFoundError: com/sun/tools/javac/Main
Exception in thread "main" Reserved 1610612736 (0x60000000) bytes before loading DLLs.
Critical Error
Launching program failed
-> Internal program error (rc = -1)
error: (sapinst.log)
WARNING 2008-08-11 15:00:00
Execution of the command "C:\usr\sap\B60\DVEBMGS00\exe\jlaunch.exe UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\install\lib;C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\install\sharedlib;C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\install" -c sysnr=00 -c ashost=sapserver -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -message_file UserCheck.message" finished with return code -1. Output:
java.lang.NoClassDefFoundError: com/sun/tools/javac/Main
Exception in thread "main" Reserved 1610612736 (0x60000000) bytes before loading DLLs.
Critical Error
Launching program failed
-> Internal program error (rc = -1)
INFO 2008-08-11 15:00:00
Removing file C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\dev_UserCheck.
ERROR 2008-08-11 15:00:00
CJS-30197 . For more details see output of logfile:
ERROR 2008-08-11 15:00:00
FCO-00011 The step createJSF with step key |NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJSF was executed with status ERROR .
Please help us out at your earliest convenience.
Thanks and warm regards,

Hello. Note 1126481 - SAP installation terminates in step createJSF
Hmmm. but it on UNIX platform...as i can see you have Windows....
Try to check JAVA_HOME and PATH are set correctly ?
Regards.

SAP SRM 7.0 with ECC EHP 4 components to execute scenario

Hi All,
I am new to SAP SRM 7.0.Could you please let me know that what are all the components needs to be in place to execute the technical scenarios and business scenarios.I had an hands on experience on SAP SRM 5.0 with ECC 6.0 backend.
Some where i read that there are lot of configuration changes when we integrate SRM 7 with ECC EHP 4.Do we need to have PI 7 for executing Centralized contract and plan driven procurement scenario?Please guide me to have some exposure towards higher version.Thank you in advance.
Best Regards,
praveen

Hello,
You can refer the INSTALLATION AND UPGRADE INFORMATION , Master guides etc maintained at the below mentioned location which will answer all your query's here.
Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.0 .
Best Regards,
Rahul

Trying to add month with a Date

Hi All,
I am trying to add month with a date. it will take the earlier month and add one month . Here is my code
declare @CollectionDate date='10-30-2014'
select @CollectionDate
;WITH CTemp AS (
SELECT TransactionDate=CAST(@CollectionDate AS DATE) ,RemainingTransaction=1
UNION all
SELECT TransactionDate=DATEADD(MONTH,1,CONVERT(date, CONVERT(varchar(4), YEAR(TransactionDate))
+'-'+CONVERT(varchar(2),MONTH(TransactionDate))
+'-'+ CONVERT(varchar(2),DATEPART(day, @CollectionDate)))),
RemainingTransaction+1
FROM CTemp
WHERE RemainingTransaction < 9
select * from CTemp
When I am giving date 10-28-2014 then it is working fine. But when the date is 10-31-2014 then it shows me the error
Msg 241, Level 16, State 1, Line 3
Conversion failed when converting date and/or time from character string.
I can undestand it is for the month of February but how do I overcome it?
Can anyone help me on this?
Thanks in advance!!
Niladri Biswas

Try the below:
--To find the last day of the month, use the below:
declare @CollectionDate date='10-30-2014'
select @CollectionDate
;WITH CTemp AS (
SELECT TransactionDate=CAST(@CollectionDate AS DATE) ,RemainingTransaction=1
UNION all
SELECT TransactionDate=cast(DATEADD(day,-1,DATEADD(month,MONTH(Transactiondate)-1,DATEADD(year,YEAR(TransactionDate)-1900,0))) as DATE),
RemainingTransaction+1
FROM CTemp
WHERE RemainingTransaction < 9
select * from CTemp
--Just to add a month, use the below
declare @CollectionDate date='10-30-2014'
select @CollectionDate
;WITH CTemp AS (
SELECT TransactionDate=CAST(@CollectionDate AS DATE) ,RemainingTransaction=1
UNION all
SELECT TransactionDate=DATEADD(month,-1,TransactionDate),
RemainingTransaction+1
FROM CTemp
WHERE RemainingTransaction < 9
select * from CTemp
EDIT: You may change -1 to 1 if you want the future months.(I am bit confused whether you are looking for previous months or future months.)

SRM 5.0 as an Add on with ECC 6.0

Similar Messages

Maybe you are looking for