SRM 5.0 Switching over from EC to Classic scenario

Hello Folks,
We are working in SRM 5.0 Extended classic scenario and the current need is to swipe from EC to the Classic scenario.
I thought it would be a click (uncheck Activation of the EC) and go. But to my surprise, system repeatedly is failing to transmit the Shopping cart into the back-end ECC 6.0 system.
Well...working into Vanilla SAP, my notion is there will be no need to activate any BAdis. Hence no BAdi implementation can be seen active in my system.
Please advice.
Thanks in anticipation.

Hi Marcin,
Thank you so much.
I awarded points for your help.
one quick issue, I am facing problem in posting invoice without reference to the PO. Error message was, "No logical system for FI is maintained. Inform system admin".
It sounds strange as I do have ECC as a solo back-end system. Second, I suppose I did best in assigning the logical system to ACS and SYS (PPOMA_BBP). Can you share your insight.
PS : I know it should be altogether a new thread. Be rest assured I will do all my best to reward your assistance !
Thanks.
Reg,

Similar Messages

HT5824 I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. Please help with turning my iMessage completely off..

I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.

If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it. Also, try changing the password associated with the Apple ID that you were using for iMessage.

My Verizon wireless service at my house has begun to degrade over the last 6 Month. It has begun to be very frustrating seeing how we switched over from Satellite to Verizon 4GLTE wireless device. How do I contact someone to see what the issue may be. Z

My Verizon wireless service at my house has begun to degrade over the last 6 Month. It has begun to be very frustrating seeing how we switched over from Satellite to Verizon 4GLTE wireless device. How do I contact someone to see what the issue may be. Zip Code 22580.

Out of curiosity how much data per month are you using? Another factor could be if neighbors have all done the same thing as you and the node is being overloaded on home internet use.

Switch over from active to passive in the cluster

If online EMS Sun Server goes off line , the client looses the connectivity with EMS till the IP address of the other online server is updated in client PC.
When the servers switch over from active to passive in the cluster, we have to change the server IP settings at the client PC manually. Since both the active as well as the passive servers will be pinging, we are not in a position to identify the active/passive servers, so automatic server setting is not possible at the client.
How to find out the solution for which server is active when the swich over is happend.

Hi Kristoffer,
remember to click on enable schedule when you schedule a package.
To know if a scheduled package is ok you can see first if present in the tblschedule of your appset and also if present in the windows task schedulerif with status "ready".
After you just have to check the view status if you found the package execution completed you're sure it's running. " version at the same time can cause issues also with different packages better to schedule with a sufficient delay to be sure that the first has ended, in your case 1 package is ok.
I would delete the 2 packages from bpc, checking also the windows scheduler to be sure that no packages are running and rebuild one from scratch setting repeat every 4 hours and checking "enable schedule".
Regards
Roberto

I recently switched over from Apple to Sony and I would like to know how I can change my settings so that all my iCloud emails are forwarded to my Gmail account?

I recently switched over from Apple to Sony and I would like to know how I can change my settings so that all my iCloud emails are forwarded to my Gmail account?

Log in on iCloud.com and go to Mail. In Mail, at the bottom left you should see a gear icon. Click on it, go to Settings (or Preferences, I'm doing this from memory), and in there you'll find an option to forward your iCloud email to another service.

Switch over from taxinj to taxinn

how to switch over from taxinj 4.7 version to eec6.0, to switch over from taxinj to taxinn, from business data point of view before cutover strategy , what are the things take into consideration , if taxcodes will overlap, with taxinn .
what are the thigs take as precautions.
waiting for ur response. thank you

When you are switching fron TAXINJ to TAXINN, WRT Tax Codes, it is recommended to maintain new Tax Codes for TAXINN, as TAXINJ follows formula based calculation & TAXINN follows Condirtion based calculation.
Regards,
Rajesh Banka
Reward points if helpful.

Switching over from Extended Classic to Classic Scenario

Dear Experts,
If I need to switch back completely from Extended classic to Classic scenario do I need to activate any BADI?
Else I can just deactivate extended classic in SPRO.
Give your comments.
Regards,
B.N.Karthikeyan.

Hi Karthick,
Extended to classic
1. in SPRO - SRM Server - Cross application basic settings - Activate extended classic scenario
-- deactivate the check box.
2 . Cross application settings -- Define objects in backend system ( reservation, PR, PO )
Need to maintain this settings.. like for the sc which document should create in backend like PR/RES/PO.
3.In classic scenario no need to maintain IPC settings.. which require in Extended classic
4. Important thing is you should take care of number ranges..
Thanks
prasad.s

I am switching over from a PC to a MacBook Pro and an iPad. How do I import my Outlook contacts into MacBook and iPad?

I am switching over from a PC to a MacBook Pro and an iPad. How do I import my Outlook contacts into MacBook and iPad?

One option is forwarding your Outlook contacts as vCard files which can be imported by the Address Book on your Mac, followed by being synced with your iPad.
In Outlook, select all contacts and at the menu bar select forward as vCard. Each contact will be a separate vCard file. Send the email to an email account you are accessing with the Mail app on your Mac.
Save the attached vCard files in a folder created on your Desktop or in whichever chosen location for the folder. At the Address Book menu bar, go to File and select Import navigating to the folder that incudes the vCard files. Open the folder to select.

Change from ECS to Classic Scenario

Dear SRM Gurus,
System: SRM Server 5.5
We had activated Extended Classic and made baseline configuration, and tested some scenario.
We now plan to change to classic scenario. So we removed tick from " Activate Extended Classic Scenario ".
Problem: When am trying to create a LEADING PO in R/3 in Classic Scenario,through Shopping cart for a material for which no stock exist, system is creating LOCAL PO in EBP, and am not able to change the PO in R/3.
Is there any NOTE to be applied to change to classic scenario? as we made configuration for ECS.
Pls guide.
Best Regards,
Dinesh

Hi Anil,
I have gone through the postings made by you, Yann and others.
Let me put forward my observations from what you have posted.
1. Is the P.R / P.O getting created in the back end?
You said you could not edit the P.O in back end.
2. Is the shopping cart going to sourcing **** pit or directly creating a P.O in the front end (EBP)?
If the shopping cart is going to sourcing then you can create a P.O in SRM but you can not edit the same in SRM and can be only editable in the back end R/3.
If this is the case then in SPRO > IMG > SRM > SRM Server > Sourcing > check whether the " sourcing always carried out" is mentioned under sourcing tab for that product category. In this case the shopping cart always go to sourcing / purchaser's work list.
If you change the setting to " Sourcing never carried out" then the shopping cart will create either a P.R / P.O in the back end based on the completeness of the data.
Please let me know about these settings and incase any clarification is needed.
Award points for suitable answers.
Rgds,
Teja

Chnge d scenario from extendedclassic to classic scenario(co code specific)

Hello Gurus
We are in SRM 4.0 in extended classic scenario.
In the Global Roll out project, For a Company Code say India , we want to change the scenario from extended classic to classic scenario.Please let us know how this can be achived using BADI's and SPRO customizing in SAP SRM and SAP ECC R/3 system.
Any pointers at the earliest will be highly appreciated.
Thanks and best Regards

Hi,
Please check this link
http://www.erpgenie.com/forum/viewtopic.php?f=34&t=10198
You have to deactivate the Extended classic scenario
Path in the Implementation Guide (IMG): SRM Server ®Cross-Application Basic Settings ® Activate Extended Classic Scenario
Be cautious while doing do in DEV server
.I think you have to maintain Distribution model in BD 64.Create message types
ACC_GOODS_MOVEMENT
BBPCO
BBPIV
MBGMCR
Regards
G.Ganesh Kumar

Mouse pausing every few minutes when switched over from a KVM?

I have just replace my old IOGEAR 2 port KVM that developed issues with a newer version of the same thing and the mouse and Wacom tablet are pausing very 45sec. - 90sec? when switched over to the MINI but run fine on the G5 plugged into the other port.
Nothing has changed except for the replacement 2 port KVM.
Anyone have any ideas???

If you crisscross the outputs from the KVM does the problem then move to the G5 and the mini work OK? That would suggest an issue with the KVM.

Why am I not able to switch over from IE to Firefox?

I am unable to switch from IE to Firefox. When trying to run this file "Firefox%20setup%204.0.1.exe" I get a message that says "Firefox has encountered a problem." I have Windows XP SP3. I switch over on my netbook successfully, which also runs Windows XP SP3, but I'm having problems on my desktop. Also, on both my netbook and desktop, I use Internet Explorer. Am I doing something wrong?

Thanks for your reply cor-el. the file "FirefoxSetup4.0.1.exe" downloads just fine. After it downloads, I'm asked to run "Firefox%20setup%204.0.1.exe" This is the step which is supposed to launch the installation wizard. This is when I get the error message. I even disabled my virus software to no avail. If the file is corrupted, where else can I get the file online? I'm downloading this one from the Mozilla site.

Switching over from pc to mac and need help!

Ok so I plan on getting the new imac they are revealing today, but I'm not completely sure how to transfer all my music over from the pc and how the iPhone will sync as I've heard that the mac didn't recognize the iPhone after it had already been synced with a pc. I was just going to buy an external hd for the music and other things, but I really don't want to spend $100 plus for something that is only for transfer and some backup. I was considering burning cd's as well as I only have about a 250 song library and many blank cd's. Which choice or other option would be best? As for the not recognizing problem, is there something I have to do to like "format" it for mac and a feature I need to set up on the mac? Any help is appreciated.

taymon21,
The iPhone will show up on both a Windows-based PC and a Mac without needing to be reformated. From the File Menu in iTunes you can choose to sync your purchased music back to the computer.
In addition the Apple Retail Stores offer a service to move your files over.
You can burn approximately 150-200 songs per CD as a Data CD in iTunes, and import from there if you would like. You can set the CD Burning preference in iTunes in Windows by going to the Edit Menu, Preferences, Advanced Tab, then the burning section. Choose the option for "Data CD"
Hope this helps,
Nathan C.

SRM table for backend PO & PR no. in Classic scenario

Hi All,
We are in classic scenario.
I need the table/view name which stores the PR and PO no. created in the backend system.
I could find different view names for PO,PR nos. from BBP_PD but is there any single table/view which stores this data ?
Any other table names will help.
regards,
Sambit

Muthu,
Appreciate your speedy response.
I found your answers helpful. Though the table didnt meet the requirement I have awarded you the points as it was helpful.
I'm not sure why but the BBP_PDBEI table should fetch the data when Bus. object type BUS2012 as suggested by you. But it only fetches the SRM POs created directly not the R/3 standard POs. I mean the table fetches "EBP PO" document type not the "R/3 PO" created directly in the R/3 backend system.
Thanks,
Sambit

When i switch over from PC to Mac?

i have an external hard drive i back all my files up with.
When i finally get my MacBook Pro or Mac Pro to migrate over is there a "wizard" of some type?
Also does the hard drive need to be formatted Fat32 or will OSX read the NTFS?

You will need to use 3rd party software or just drag document files over. The only "wizard" works with OS X volumes.
OS X can read FAT32 and NTFS but it can't write to NTFS without 3rd party drivers or software. MacFuse and MacDrive are two I can think of.
If you ever want to boot from your external, it needs to be formatted to Mac OS Extended (HFS+) and the drive needs to use "GUID Partition Table" rather than Master Boot Record. Disk Utility: Partitions -> Options... is how you change partition tables and reformat.
You might want to have a 2nd backup - I find two is minimum - and keep one as is, and later have rotating backup sets with one set always off line.
If there was one program to use for backups and synchronizing, I would start with free/shareware and excellent Carbon Copy Cloner 3.0b4.
http://www.bombich.com

SRM 5.0 Switching over from EC to Classic scenario

Similar Messages

Maybe you are looking for