SRM 7.0 Central Contracts Migration from ECC existing contracts

Hi colleagues
We are facing the implementation of SRM 7.0 in a client who has ECC installed and we have a doubt with contract migration
We are considering using SRM Central Contracts in order to get them replicated on ECC
All the contracts "alive" that exist in ECC should be created on SRM as central Contracts. The problem is that when you create a SRM central contract the system will replicate it to ECC ... in that case we will have the same contract twice on ECC
Does anybody face this situation?
I figure out that if at the moment we are creating SRM central contracts we turn off XI/PI the system would not replicate the contract to ECC but I think it would return an error without creating the contract on SRM... and even if we managed to create the central contracts in SRM without replicating them to ECC we would have the problem that both contracts wouldn´t be linked
We can´t consider the solution to be creating those contracts on SRM as SRM local contracts because we need to follow contract cicle in SRM after migration
Could anybody help me out with these?
Thanks
Regards

Hello,
You can upload contracts from ECC to SRM using report BBP_CONTRACT_INITIAL_UPLOAD in SRM.
If you want take care of document type mappings/ Condition type mappings, use badi BBP_CTR_INIT_UP in SRM.
Thanks,
Sushil.

Similar Messages

How to map service contract data from ecc to crm

Hi Experts,
Please help me,how to map service contract data from ecc to crm system.
is there any perticular process.please let me know.
thanks in advance..

Hi Srinivasulu,
Create the service contract type of ECC and also item categories under it in ECC in CRM. Map the number ranges.
Check the Partners mapping from R/3 to CRM and that will be all.
I tried but in CRM in the transaction type internal number range is mandatory. So, if you create service contract in ECC with one number it will replicate to CRM but with different number. But you can see ECC number under the transaction history in CRM.
Good Luck.
Sharath.

Contract data from ECC to MDM

HI all,
We have standard setup to push Contract data to catalog from ECC using MECCM transaction from ECC... and Via PI we use the standard way to FTP the file... we use standard mapping interface in PI - CatalogueUpdateNotification_Out... which in turn pushes the Data from PI to FTP server. Where the MDM picks it and upload it.
Everything works fine.... But I need to understand how the MDM recogize the File and how the PORT and XML schemas upload the FIle into MDM database???
Need to Identify whether it can be modified???
regards,
Prabhu

Hi Prabhu,
You can upload the xsd from PI into MDM. To get the schema go to your message type and click on xsd tab and copy and paste in notepad and save as .xsd and upload. Else you need to create the schema in external tools like altova xml spy or stylus studio etc.
There is option in MDM whether to load that file from the port automatically or manually. If automatic it will load immediate else you need to run manaully the file.
Need to Identify whether it can be modified???
I did not understand this. Do you mean to change something in the file once written from PI. If yes then try to go to MDM console and open the port and load it manually. So the file will be sitting there and you can modify and upload manually through Import Manager. But this is not advisable in production.
If PI is sending a csv or tab delimited file then you dont need to have a schme for that. You can load it manually.
Regards,
---Satish

Issue in Temp table creation in PCM Databridge and data migration from ecc to PCM using databridge

Hi,
we are working on mapping SAP PCM table structure data and the data which is coming from ECC.
We are using Databridge tool to upload the data for the same,upload from databridge involves
using Specification file to upload the data into SAP PCM.
The problem we are facing is that
The responsiblity center(cost center) in ECC and SAP PCm are different.There is one to many relationship between them
eg 1 ecc cost center-->many SAP PCM cst center,we need to split the line item vale of one ecc cost center into many SAP PCM cost centers
eg C1 cost center from ECC has value 4000 to be split across PCM1,PCM2,PCM3,PCM4 cost centers in SAP PCM
we need to automate using the databridge ,we are stuck up in this task.
Please guide us.
Also we are trying to create temporary table usinf Table temporary command in SPE file of databridge.The purpose of this is to put the ECC data in temp table as per our req and then use the temp table as data source for putting data in PCm as per our requirement.
Please advise us on this approach
Regards
Shrirang
9552334897

Schema's SYS,CTXSYS, MDSYS and ORDSYS are Not Exported using exp/expdp
Doc ID: Note:228482.1
I suppose he already installed a software 12c and created a database itseems - So when you imported you might have this "already exists"
Whenever the database is created and software installed by default system,sys,sysaux will be created.

TDMS Migration from ECC 5.0 to 6.05

Does TDMS version 4.0 supports data migration between ECC 5.0 and ECC 6.0 EhP5? With the upcoming release of LVM into ramp-up, would this be a better alternative?

Hi,
No, TDMS does not support data transfer between system of different release.
How LVM will help you in doing data transfer between different releases ? As per my understanding LVM is totally different tool than TDMS.
Thanks
Sunny

EJB migration from an existing jar

Hi,
I have a jar containing my ejbs with descriptors(jboss/weblogic). I have created an enterprise application project in NWDS. Is there any way i can directly put this ejb jar into ear project without using migration plugin. I will change the descriptors in the jar file manually. Please guide..
Thanks and regards,
Sujesh

Re: Why not boot from the 750 GB drive and try the migration that way?
Good idea, but no joy. I've booted from both the original 250 GB HD and the new 750 GB HD and in both instances Migration Assistant reports one of my folders has 239.8 TB. Any idea why such an impossible amount is reported? Thanks, -wjm

Can Hyperion repository be migrated from Oracle to MySQL

Hi Gurus,
I was wondering if Hyperion Repository can be migrated from an existing Oracle database to MySQL database. If yes, then how? Any kind of advice is greatly appreciated.
Regards,
Uday

Hi,
First question is why you want to move from Oracle to MySQL as in newer versions of Hyperion MySQL is not supported anymore.
There is no direct way of migrating the database you would have to look at using a 3rd party conversion tool or writing some custom code.
Cheers
John
http://john-goodwin.blogspot.com/

Google Apps Connector: Migrate from 1.0.4455 to 1.1.5658.jar

Hello IDM Gurus,
Recently I upgraded our IDM instance from 8.1 with patch 14. My
understanding is that this aggregation of patches would also allow us to
utilize the new Google Apps (org.identityconnectors.googleapps-1.1.5658.jar) connector.
http://wikis.sun.com/display/IdentityConnectors/Google+Apps+Connector
1st question: How does one migrate from an existing instance of the Google Apps connector 1.0.4455?
Resources->Migrate Adapters->Migration Wizard (Does not list the Google Apps Resource)
Thank you for any assistance or documentation you may be able to provide.
- IDMxml

I think you had copy from some where i.e pdf, doc file. Write in notepad, don't copy, paste it and try.
In error clearly showing some kinds of junk character ie. "ûrepository"
Edited by: 953040 on Apr 10, 2013 10:47 PM

Migration Tool for Contract & PO from R/3 to SRM 5.0

Hi gurus,
I'm working on an implementation of SAP SRM 5.0 for the following scenario:
- Plan driven
- Contract Management
- Order Management
We actually have 2 R/3 system. We want to migrate contract and PO from this system to SRM and then manage contract & PO into SRM. Following changes on these documents became possible only on SRM. But we want to distribute these changes and new documents from SRM to R/3 systems, working with extended classic scenario (for contract we want to use GOA contract).
Moreover we have another activity to do few months after go-live. In fact we need to close 2 R/3 system and to switch to one new ECC system, in wich we have to migrate existing documents. So we have to convert on these documents organizational structures, vendors, back-end systems and so on...
Have somenone any idea to do it? There is a SAP tool?
Thank you in advance.
Best Regards

Marco,
ever heard of report BBP_CONTRACT_INITIAL_UPLOAD?
Excerpt from the initial comment...
*Purpose:
*This program can be used to upload contracts from ERP to SRM. A
*separate contract in SRM would be created for each successfully
*transfrred ERP contract. Also the list of all the successfully
*transfrred contracts would be maintained in SRM.
Hope this helps,
Richard

Net price zero for SRM service central contract in SAP ECC

Hi
Net price in backend ECC is showing as zero for SRM service central contrracts, all other price fieids are fine expect net prices. We have no issues for material contract.
Does any one had similar issue of net price zero? I have tested this scenrio in couple of SRM 7 landscpape all are with similar behaviour. Is it standard?
Your response is highly appreciated.
Regard
Prashanth K Saralaya

Hi prashant
I never tried service . but you can see this below symptom for you.I extensively worked on Material contracts.
Are you creating contract from Process contract or Via RFQ
Note 1272305 - Total value wrongly calculated in Contract Service lines
Symptom
We create a Service contract in the R/3 Backend from RFQ. During the transfer we calculate the gross price based on the quantity,price and price unit. (ie) The field ESLL-BRTWR is filled with following formula in the idoc processing. ls_e1edc20-BRTWR
= ( is_item-price * is_item-quantity ) / is_item-price_unit.
AS total value of the service lines is calculated based on the field NETWR which is passed as blank from SRM, during recalculation total value when we change the gross price of one of the service lines in r/3, it is required to fill this field
till PI values are brought correctly till posting to ECC. ?
Note 1123292 - Net Price wrongly calculated in plug-in MAP_BLAORD_SERVICES
my experience in GOA
Note:-
2 set stream of DATA comes from SRM as BLOARD and COND_A ..
Even some times when we reprocess failed IDOCS in BD87 in ECC ( comes contract data from SRM as GOA and failed due to some data validation in ECC). now data issue was fixed at Material master level. and
if we forget to reprocess COND_A - BLOARD creates a successfull GOA but net price shows as ZERO for each material and when you post the COND_A data and correct price will be updated in ECC contract. so kindly check price data reaches or not not or price calculation failed in ECC.
Muthu

How Product category contract replicate from SRM to ECC?

HI, dear experts:
     I work with SRM 7.0.   I have reliazed that contract with product ID replicated to ECC , it is a standar way.   But the contract without Product ID ,only product category and description    cann't be replicated to ECC.    why?   how I do ?
    Please tell me ,thanks very much.
Jesse.

Hi, Muthu
I made e some change in ECC . and the error info is "Combination item category W /account assignment category U not defined" in BD87 .
     item category 'W' is material group in ECC.
how will i do ?
   thank you
Hi, Muthu
     I made the setting in ECC to permit 'Combination item category W /account assignment category U', and the contract can reach the ECC.    in ECC, the contract item category is 'W' (material group).      actually, in ECC ,material group contract can be created wihtout 'W'.    the MM consultant also don't except 'W' as item category, should as empty.   Will I do some change in SRM . how to do ?
thank you again
Hi, Muthu
     By testing, I found the situation:
    when creating contract, in item, if I select Item Category as 'Product Category' , then I can't input 'Product ID' ,'Unit', 'Price', etc.   I can only input main info such as 'Target Quantity' 'Target Value' etc.
     when the contract is generated in ECC.     the item category is 'W' , Target Quantity is empty, Price is empty, the Target value that is input in SRM    is disapeared,   in other words, this kind of contract don't have price (value) .
      is it normal?
      my business expect it is like with product ID. can this be realized?
detail 'W' can be known from url:
http://help.sap.com/saphelp_46c/helpdata/en/75/ee0f4055c811d189900000e8322d00/content.htm
Jesse
Edited by: Jianxin Lei on Jun 28, 2010 11:10 AM
Edited by: Jianxin Lei on Jun 28, 2010 1:45 PM

Central Contract Mngt: Contract Confirmation Out not triggering from ECC

Hi,
Can some one take a look at this and let me know if you have any suggestions
After following note 1268821 we have Contracts replicating from SRM to ECC via PI. However we are not getting the Contract Replication Confirmation Out triggering from ECC to SRM The configuration in PI is waiting to receive PurchasingContractSRMReplicationConfirmation_Out from ECC for delivery to PurchasingContractSRMReplicationConfirmation_In in SRM.
Does anyone know what we maybe missing, perhaps a setting in ECC that will trigger the Confirmation Out to SRM?
Any help much appreciated.
Che

Just an update.
It turns out that ECC is generating message PurchasingContractERPConfirmation_Out which is contrary to what we are expecting PurchasingContractSRMReplicationConfirmation_Out.
Have logged it with SAP support for now.

Multiple contract creation in ECC from a single GOA

Hi Experts,
I am working on a solution regarding to GOA in SRM - Contract in ECC creation and i am wondering about the following scenario:
Create 1 GOA in SRM 5.0 for a central/global purchasing organization and when the appropriate BADI going to transfer it into ECC, it creates contracts for all company codes.
At my current client they use GOA but until now they created 1 GOA for a specific p.org and the BADI transferred (and created) contract in ECC for the specific company code (they donu2019t have kind of central/global purch organization unit in ppoma). In the future they would like to create GOAs which are usable for all companies, but instead of creating (and changing) them manually (N GOA in SRM for N contract in ECC) they want to have an automatism.
Does any of you have any experience on this? That would be really good if you can share with me some high level overview about concept.
Thanks in advance for your help!
Best Regards,
Attila

Hi,
Let me correct if i am right:
- Central Contract -> new concept of SRM 7.0. 1 contract which is visible and usable from ECC and SRM as well. (not available in SRM 5.0 - agree)
- GOA -> it exist in SRM 5.0 for sure! (we are currenlty using it for ECC procurement).
The solution what you are mentioned is good...but as you said only for SRM 70...we are in SRM 5.0 and we need solution for here. Do you have any idea?
Currently i am thinking about a new solution based on "standard" functionalities: if a GOA need to be created for mulitple company, it has to be populated in Header distribution (all company will have the same contract header). It item detail all the required information need to be poupulate in SRM (i.e.: item 1 for p.org1/comp.cod1; item 2 for p.org2/comp.cod2).
When this is done, the BADI need to check the informatoin in SRM GOA and create contract according to that -> in this case 1GOA is created, but the 2 items for totally different p.org/comp.code, the BADI needs to create 2 different contract in ECC (i would like to avoid using reference purchasing organization in ECC!
Thanks in advance!
Best Regards,
Attila

SRM 7 - Contract replication from ERP to SRM

Hi all,
We have SRM 7 and ECC 6.0 and we have a requirement to have contract handling for invoices functionality, in SRM, in order to create invoices with reference to a contract directly.
We want to have ERP system as the central repository for all contracts, meaning that we need to replicate the contracts to SRM, and all the changes made to the contract in ERP side should also be replicated to SRM.
Does anyone know if this scenario can be done as per standard? And if so, how can we replicate the ERP contracts to SRM and ensure that all the changes made in ERP will be replicated to SRM?
Thanks in advance.
Regards,
AN

Dear Krupa,
Thank you for your quick reply.
So we should consider the scenario where SRM is the central repository for the contracts, and all the changes done in SRM should be replicated to ERP.
In this scenario, do you know which steps should be done to allow contract replication from SRM to ERP? I already created a central contract in SRM but there is no message sent to PI.
Thanks in advance.
Regards,
Andreia

SRM 7.01 Central Contract: Email Notification when contract is distributed

Dear all,
I lwould like to know if it exists a standard functionality for distribution notification and how it is customizable.
The scenario:
I create my central contract in SRM and i would like to be able to send email alert to the back end user (Local Contract Manager for example) when the contract has been distributed correctly. Does the user need to be is the SRM Organisational Structure?
Can i use the event schema like expiring contract notifications?
Thank you for your help.
Best Regards,
Jennifer

The first interface that try to get out from SRM was " PurchasingContractERPRequest_Out_V1", thus based on this interface we made the configuration on PI. So, after pressing button " create contract" on srm if we execute tx SXI_MONITOR in SRM we found the interface " PurchasingContractERPRequest_Out_V1" and in the backend system ( ECC) at tv SXI_MONITOR we found interface PurchasingContractERPRequest_In_V1 for this contract with black and white flag ( processed successfully) but no contract created in ECC not even SRM.
Anyway we have checked that inbound proxy is executed but we dont see any contract created
Is this the right Interface? We are missing something?
Best regads and thanks again for your help!

SRM 7.0 Central Contracts Migration from ECC existing contracts

Similar Messages

Maybe you are looking for