SRM 7.0: How to add Ship-to address ?

Hi Experts,
This is on SRM 7.0.
I have to add a new ship-to address in SRM 7.0.
When i log in as SRM ADMIN, i go to the transaction "Business Partner: Purchasing Company".
Here i have the options "Create Purchasing Company" , "Display" and "Edit"
The option "Create Purchasing Company" is alone open to execute, where as the other two options like "Display" and "Edit" are greyed out.
The table is also empty, even though we have Companies created in the system already.
Is there any setting required to bring up all the Companies in the table ? sothat i can Edit or Display ?
Please advice.
Thanks!

Harsha,
Edit and Display buttons will be active only when you select any purchasing company from the list that displayed when you choose  Purchasing Companies. So in your case you do not have any Purchasing companies maintained and hence you were not able to view the companies.
To view the companies in the list you need to maintain a company in the Org structure.First choose an org unit and activate company check box under Function Tab and make sure BP# is generated by the system for this org unit. This will create a Purchasing company. Then logon to SRM portal and go to "Business Partner:Purchasing Company" and refresh the screen, you will see the company you just created. Select this and click Edit button that will open a new window. Go to Address Data tab and create new addresses and activate the check box Ship-to Address.
Hope this will help you.
Thanks,
Jagadish

Similar Messages

  • How to add ship To field to Shopping Cart

    I have a request to add ship to address field for Limit shopping carts. Can any one please let me know how we can do the same?

    Hello,
    Usually, delivery address tab is displayed in limit shopping cart. Some other fields are not displayed, but delivery address is.
    Check the following wiki page:
    http://wiki.sdn.sap.com/wiki/display/SRM/LimitShoppingCart-Somefieldsarenotdisplayed
    Regards,
    Ricardo

  • How to add the IP address helper command to the switch

    Hi
    I am trouble shooting a SF 200-48P and I am a bit lost without a CLI not used to the GUI. What I need to know is how to add the IP address helper command to the switch?
    I have a number of IP phones which are not getting an IP address from DHCP (PCs which are diasy chained off the phones are all working correctly). On the higher end switches I would have added the IP address helper command to the VLAN and that would have sorted it. However I can't seem to figure out how to do this on the small business switch.
    Thanks
    Lorne

    Thanks Rizwan. I was banging my head wishing they weren't small business switches as I felt lost without the command line!
    Lorne Gallagher | McCann FitzGerald Solicitors | Riverside One, Sir John Rogerson's Quay, Dublin 2, Ireland | DDI +353 1 607 1726 | Fax +353 1 829 0010 | www.mccannfitzgerald.ie
    Ireland Law Firm of the Year 2011 | Chambers Europe
    Ireland Law Firm of the Year 2011 | International Financial Law Review

  • HT2486 want to know how to add pictures to address book that DO NOT appear as fullscreen images on the iPhone but remain as icons with the iPhone background visible

    want to know how to add pictures to address book that DO NOT appear as fullscreen images on the iPhone but remain as icons with the iPhone background visible (see attached image). for some reason, all new contacts added through Mountain Lion appear as fullscreen caller ID images.

    This would be better addressed in the iPhone forum, I would post there as well.

  • How to add ship-to and sold-to party name in a view table.

    Hi Expert,
    May i know how to add in the field names for ship-to and sold-to party name in a view table? I know that the name should be retrieve from KNA1 but how to map the name to the respective fields? Please help urgently. Thanks.
    Regards,
    Shawn
    Message was edited by: Manish Kumar : Do not use urgent word.

    Hi,
         Use Table KNVP for Codes and Join with KNA1 for names using Alias LIKE
         select a~kunnr a~name1 b~kunnr b~name1 from
           kna1 as a
         INNER JOIN
           kna1 as b on a~kunnr eq b~kunnr
           INNER JOIN knvp as c
         on a~kunnr eq c~kunnr
         INTO TABLE IT_SHIP
         where c~parwe in ('AG','WE')
         AND KUNNR IN .....

  • How to add shipping instructions while creating SO

    Hi All,
    I'm using the BAPI_SALESORDER_CREATEFROMDAT1 to create Sales Order.
    I want to add shipping instructions while creating each orders.
    How do I pass this information to the backend with this BAPI?
    Thanks
    Thruna

    Somebody knows like I can indicate to him to a button that I have in a form, that accedes to the image in the route where will settle addon? I have this, but it does not work to me
    oButton.Image = IO.Directory.GetParent(Application.StartupPath).ToString & "\CFL.BMP"

  • How to modify Ship-to address when adding item into SC

    Hello,
    I need to modify a Delivery address (ship-to) address of a shopping cart.
    I tried to create a implementation of BADI BBP_DOC_CHANGE_BADI, method BBP_SC_CHANGE where I tried to loop at et_partner, searching for ship-to address partner (partner_fct = 00000027)
    I updated the building, floor and room fields for this partner
    <fs_partner>-building_p = l_usr_addr-building.
    <fs_partner>-floor_p    = l_usr_addr-floor.
    <fs_partner>-room_no_p  = l_usr_addr-roomnumber.
    but it's ignored in Delivery address tab (the data is not shown) until I clear the ADDR_NO field:
    CLEAR <fs_partner>-addr_no.
    In this case the Delivery address tab displays correct data
    But when this shopping cart requires to be approved (ie because of not enough spending limit of the requistioner), the Approver opens the shopping cart, the delivery address is OK. But when he choose Reject (or any kind of edit action), then click on Delivery address tab, all address fields are empty
    Please suggest how can modify the Delivery adrress ?

    Hello Miroslav,
    As you cleared ADDR_NO, address data for partner Ship-To are deleted: this is logic...
    You need to populate correct ADDR_NO to your Ship-To partner.
    Have a look at wiki below:
    [Delivery Address in Shopping Cart - How does it work ?|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=230261594]
    Regards.
    Laurent.

  • Error in SRM 7.01,Trace showing Partner Ship-To Address not found in FEH.

    Hi Gurus,
    Please throw some light on my isssue.
    We are developing Plan Driven Procurement Business Scenario in SRM.
    Current System details are ECC 6.0 EHP4, PI 7.1 & SRM 7.01.
    We have done all the configuration settings in ECC, PI & SRM.
    PR created in ECC 6.0 and External source of Supply tab generated in PR, processed through SAP PI successfully to SRM 7.01. In SRM it showing an error trace as *Partner Ship-To address not found* . We are using ABAP Proxies and standard content for this PDP Scenario.Using PurchaseRequestERPSourcingRequest_Out as an outbound interface and PurchaseRequestERPSourcingRequest_In as Inbound interface. shopping cart is not getting created in SRM system. FEH is enabled in SRM system to trace the error.
    Please provide inputs to resolve the issue.
    Ashok

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • CRM B2C Shop : How to add multiple delivery addresses ?

    Hi
    We have a requirement add multiple delivery addreses to the Web shop user. The default process adds an address when registering. This works. We need to add additional delivery addresses. I have tried the following code, but it doesn't work:
                 User user = null;
              Address address = null;
              user = bom.createUser();
              user.clearMessages();
              BusinessPartnerManager buPaMa = bom.getBUPAManager();
              address = new AddressFormular(requestParser).getAddress();
              BusinessPartner partner = buPaMa.createBusinessPartner(user.getBusinessPartner(), null, address);
              SoldTo soldTo = new SoldTo();
              if(!buPaMa.addPartnerFunction(partner,soldTo))
                   String error = buPaMa.getMessageList().toString();
    Any suggestions?

    Hi
    Thanks for the info. I realise the code I added will not do what I want. My requirement is NOT to add a delivery(ship-to) address to the order, but to list, add, remove delivery addresses of the users profile from CRM. Our CRM consultant directed me in the right direction. The standard CRM bapi's to handle BP addreses are:
    BAPI_BUPA_ADDRESSES_GET
    BAPI_BUPA_ADDRESS_ADD
    BAPI_BUPA_ADDRESS_CHANGE
    BAPI_BUPA_ADDRESS_GETDETAIL
    BAPI_BUPA_ADDRESS_REMOVE
    I searched the CRM Shop standard Java code and these bapi's are not called. We will have to write custom Java to implement these bapi calls.
    Thanks,
    Chris

  • How to add iCloud email address

    Can't find any info on how to add another icloud email address.
    Any help out there?

    You can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
    You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
    More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a

  • How to add an email address to an existing contact?

    Can someone explain how this is done (without having to email someone first. You should just be able to add an email address to a contact, yet I have not seen or found a way.
    Please help.

    Thank you nitekram for providing a helpful troubleshooting tip.  
    For future reference, you can view your user manual online to quickly search the steps on actions you would like to perform. Since each device can have a different series of steps to follow, please go to the link below to locate your device's guide:
    www.verizonwireless.com/phoneguides
    Thank you!
    KellyW@VZWSupport

  • How to make ship to address fields mandatroy while creating sales order

    Dear forum Members,
    My client oraganizes trade shows and hence ship to address vries everytime when sales order is entered for the same sold to party.So one times ship to customer is used in the sales order and address is entered at sales order level. Please note that at master data level all address fields are suppressed for one time customer.Hence there is no question of going back to one time customer account group and making any field mandatory.
    While changing address for ship to at order level, there are few fields which are mandatory, for example city is mandatory. I also want to make zip code and region as mandatory.where is this controlled?Please note that this is not account which controls this. i have already done lot of r&d on account group and transaction variants which are not controlling these fields at sales order level.

    Hi Kanwal,
    Only incompletion procedure will not suffice for your requirement.
    You need to make the field mandatory wherein, if you dont enter, system will not allow you for enterin further fields. For this you should do the following:
    Goto transaction SHD0, you will get a screen where you need to enter you Tcode "VA01"
    Below you define a transaction variant (starting with Z).
    On the next tab you have Screen Variant. Here you enter screen variant name, program name & screen number.
    Then you click on create.
    Its like as if you are doing some kind of recording. Finally you will reach to the screen where there are options available to make the field mandatory.
    For your reference the program is SAPMV45A screen number is 4001.
    Further screen are self explinatory.
    Hope this should solve your requirement
    Regards,
    Dhananjay

  • How to Add new Manual address in ADRC?

    Hello Experts,
    My requirement is, I want to add new address in ADRC table, once I insert new address, I will get the new ADRNR number fot that address.
    I want that ADRNR to link with vendor address in delivery document. Means wants to update VBPA table
    ADRDA = u2018Eu2019 and ADRNR = new address number for VBELN = <input>
    I tried to use FM ADDR_INSERTu2026 but itu2019s not returning me anything 
    Do have know how to use these FMu2026 please provide me the sample code.
    Or do you have nay other alternative to do this.
    - Shweta

    Hi
    Why don't u change the address in sales document for that partner?
    Try to use BAPI_ADDRESSORG_SAVEREPLICA
    Max

  • HT6413 how do add another email address to icloud

    I have just bought a windows 8 laptop as a second back up, but I cannot add a non apple email to icloud for windows
    does anybody know how I can do this?

    Thank you so much for tolerating the confusion I created for myself. YEA
    About the "enter email address" ... gee, how did I think Firefox was going to be able to communicate with me?
    So... I go to the AOL mailbox, sign in as usual, the little box is coming down, and I click on save ... ah ha
    If I am on another computer, I will open Firefox ... enter the master password ... and move on as usual? ... because all this is on Firefox servers.
    Small confusion ... scenario ... I am to work on a computer without Firefox installed, and I may not install it. What do I do (say, to get on Yahoo mail) or anywhere else?
    Thank you many many times.

  • How to add image to address labels

    I used to do this all the time, in the good old days. Now, I don't seem to be able to move a tiny clipart item into the area of a label. I can make the labels but no clipart makes it to the printing part. What am I forgetting???
    I was able to add same clipart into business card - but they gave me a square into which to drag that.
    I can get the clipart to appear in the original set up, but it doesn't copy into the list, nor does it show up in print out.
    I hope I am making sense.

    Hi Vicki,
    With the labels showing, press shift-command-L to go to Layout mode.
    Paste your image onto the layout, then size it to fit.
    Return to Browse mode by pressing shift-command-B.
    Regards,
    Barry

Maybe you are looking for