SRM 7.0 How to change the descr of Step 3 of the FPM in sourcing cockpit

Hi
I am trying to change the description of the Step 3 in carry out sourcing from Review Drafts ( No data ) to some custom description. So I went into the component configuration /SAPSRM/WDCC_FPM_DO_SOCO_GAF for the FPM_GAF_COMPONENT and replaced the step 3 with my custom webdynpro component and changed t he description and saved it. But when I actually carry out sourcing it is still displaying the old title but calling my new webdynpro component. Does anyone has any idea why it is doing it that way.  Is there another place that I need to change the description.
Thanks in advance
Krishna

I figured it out myself. It is happening inside the method SET_GAF_STEP_TEXT

Similar Messages

  • How to change keyword in many pictures at the same time?

    I gave a big series of pictures the wrong keywords. Now, I can't figure out how to change them (besides one by one...).
    If I select e.g. 10 pictures in Library-mode, how to change keywords on them all at the same time?

    Make sure you are in Grid View, primary monitor (if you have two), select 10 pictures and type (or delete) the keywords in the Keywording panel in the left upper corner.
    Make sure the Metadata->Show Metadata for Target Photo Only is unchecked in the menus. Otherwise your edits will only apply to the primary selected (most selected) image.

  • How to change async to sync after deploying the process.? Thanks

    How to change async to sync after deploying the process.? Thanks

    you'd need to change the base wsdl, the generated one (_Name.wsdl) and the bpel.file .. and remove the generated classes .. (all in domains/you_domain/tmp/your_process dir)
    the wsdl needs to get the output msg to the input msg instead of a callback porttype, the same needs to be in the generated wsdl (don't forget to remove the callback role in plnk session).. and the bpel process needs to have a reply instead of the invoke ..
    this is what you would need to do .. BUT, maybe we can find a better solution for you, if you elaborate on the usecase..
    during design time this is easier :-)
    regards clemens

  • When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object?

    When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object? The clip color turns purple and it only allows me to add motion but not change the clip duration and speed anymore.

    Thanks for the reply and as a work around method I used the Photoshop to do all the adjustments then export the video to iMovie to finish the final cut. I also have a problem to paint or clone on a blank video layer created in Photoshop. It tells me the time is beyond the target frame time, I don't understand the message. Can you explain to me what did I do wrong? Thanks a lot!
    John Wang
    801-3618742
    [email protected] 
    http://johnwanggallery.shutterfly.com  

  • How to change Topic's Icon and show the Print Button

    Hi, currently i'm using robohelp html version 8. I have spent quite some time to figure out how to change topic's Icon and show the Print Button in my project. Anyone can help me on this? Btw, i using MX(template) to generate the output with FlashHelp Pro.
    Below is the screenshot for clearer clarification:
    Thanks.

    We would have told you if there was.
    Sorry but a downside of FlashHelp is that your customising options are limited.
    See www.grainge.org for RoboHelp and Authoring tips
    Follow me @petergrainge

  • SRM 5.0 - how to change default password?

    Hello,
    Am trying to install SRM 5.0 Oracle 10g as the DB. In the instllation doc of SRM 5.0 a default password is given to connect to the database and I see the encrypted password is in the jdbc properties. How can we change the default password? How do I get the encrypted value?
    Any help is appreciated.
    Thanks

    Propblem resovled, find the corresponding function group and screen, then change the translation.

  • How to change annotation's appearance  when printing the annotation under Adobe Reader?

      I'm developping a plugin under SDK 7.0 for Adobe Reader  . I have two problems.
      1)I will change annotation's appearance  when printing the annotation. How to do under Adobe Reader?
        Uunder Adobe Arobat,I use PDRegisterAnnotHandler to register GetPrintAppearance,but PDRegisterAnnotHandler does not work under Adobe Reader.
      2)Under Adobe Reader ,app.execMenuItem doesnt work.How to execute menuItem using JavaScript under Adobe Reader?
    Please Help,had better give me sample,thank.

    app.execMenuItem most certainly does work with Reader - what problems are you running into trying to use it?
    As for developing Reader plug-ins - yes, some of the SDK methods aren't available to Reader.  If you want to change the appearance of an annotation in Reader, you would need to acquire the Cos object of that annotation and modify its appearance dictionary manually.

  • How to change a TAB dynamically to be the active tab?

    Hi,
    I have a portlet written in Java and registered using a web provider. This portlet exposes a link which drives the content of another portlet through parameters&events.
    This other portlet is placed on the same page but on a different TAB (!).
    What I want is, when clicked on the link in Portlet1, this changes the content of the Portlet2 (via an event and parameter - that works) AND should change the TAB, so that the TAB which contains the Portlet2 is active and shown.
    I couldn't figure out, how to change the TAB with an event or any other way. I can easily change the page through an event, but not to a tab on the same page. Do I overlook something or can I just don't use events for this?
    Is there any API function which does changing tabs or getting the tab id or is there any other programmatic workaround to do dynamic tab changing?
    If so, can someone point me to a code fragment?
    Any help would be much appreciated.
    Cheers,
    Erik

    A work around may be to change the location.href to the url of the tab you want to switch to.
    Have you tried that already?

  • Agent Inbox - how to change SLA colors (traffic lights) in the Web UI

    In agent inbox,
    component: ICCMP_INBOX
    view: InboxResultView and view: InboxItems
    There is a field : overdue
    This field displays red or green based on the due date of the inbox items.
    I want to change this color based on my own custom logic.
    Where do i write code for this ?
    While debugging I see that the field Overdue has only the due date and time but on the web UI screen I see that this field has a red or green icon. Does anyone know where is the code written for displaying the sla color.
    Thanks,
    Karthik

    Hi Karthik,
    In the context node class -> goto Attributes -> there you can see iterator class, for example : CL_ICCMP_IN_INBOXRESULT_IT
    Go to the iterator class and look at method IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START
    There's logic on how to show the icon overdue become red, yellow or green. You can enhance the iterator class and modify the logic to whatever you want and then change the attribute of the context node class to the Z-iterator class
    Hope it's help,
    Lina

  • How to change Windows 7 file associations in the registry

    Hi,
    I have a group of computers that have Office 2010 installed and then PowerPoint Viewer 2007 was installed after that to temporarily resolve an SCCM 2007 patching issue. Needless to say, PowerPoint Viewer 2007 changed some of the PowerPoint 2010 file associations
    to itself instead. I am scripting a clean-up operation to remove PowerPoint Viewer 2007 and set the file associations back to PowerPoint 2010. After doing some research, the few registry paths commonly called out do not contain the information that I am looking
    to change.
    HKEY_CLASSES_ROOT
    HKEY_CLASSES_ROOT\Applications
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts
    The file associations that I need to set back to PowerPoint 2010 are as follows:
    .potm, .potx, .ppsm, .ppsx, .pptm, .pptx
    Does anybody know where to look for where these file associations are set in the registry?
    Thanks,
    Rob

    This is how it is done in vbscript as well:
    http://www.visualbasicscript.com/tm.aspx?high=&m=97211&mpage=1#97217
    Set objShell = Wscript.CreateObject("WScript.Shell")
    objShell.RegWrite "HKCR\.potm\", "PowerPoint.TemplateMacroEnabled.12", "REG_SZ"
    objShell.RegWrite "HKCR\.potx\", "PowerPoint.Template.12", "REG_SZ"
    objShell.RegWrite "HKCR\.ppsm\", "PowerPoint.SlideShowMacroEnabled.12", "REG_SZ"
    objShell.RegWrite "HKCR\.ppsx\", "PowerPoint.SlideShow.12", "REG_SZ"
    objShell.RegWrite "HKCR\.pptm\", "PowerPoint.ShowMacroEnabled.12", "REG_SZ"
    objShell.RegWrite "HKCR\.pptx\", "PowerPoint.Show.12", "REG_SZ"
    One thing to note is that the user will need to log out and log in again to reload the changes to the registry which also updates the change to the file extensions.

  • HT5576 How to change my 4digit pin code at the front screen of my iPad mini

    How to change my iPad mini opening page 4 digit security code

    You can only do that once the iPad is unlocked so of you forgot the passcode, you have to restore your iPad. Be prepared to lose all of your data as well. If you have a backup, you will be able to restore from the backup when you are done restoring the device.
    Read this for more details.
    iOS: Forgotten passcode or device disabled after entering wrong ...

  • How to change a h:outputText value in the current form on key pressed event

    Hello Suners,
    Greetings! I'm developing my first JSF web application and i'm trying to figure a way out to change outputText value when key pressed on another inputText so that when the user is typing his name for example he can see the letters showing respectively in the outputText.
    I managed to do it onchange but the user must focus out of the inputText to see his name in the outputText which is not right and the form must submit onchange event which is annoying.
    <h:inputText value="#{login.username}" title="name" id="name" required="true" onchange="this.form.submit()" >
                                <f:validateLength maximum="10" minimum="1"/>
                                <f:validator validatorId="myValidator"/>
                                <f:valueChangeListener type="classes.MyListener"/>
    </h:inputText>Is there any listener i can associate with the "onkeypress" attribute? Can anyone help me to do that with JSF?
    King Regards,

    hi, with JSF 2 you got the ajax tag, just tried it and it works fine :)
    <h:inputText id="myinput" value="#{back.name}">
        <f:ajax execute="@this" event="keyup" render="outtext"/>
    </h:inputText>
    <h:outputText id="outtext" value="#{back.name}"/>or before JSF 2
    <h:outputScript name="jsf.js" library="javax.faces" target="head"/>
    <h:inputText id="myinput" value="#{back.name}" onkeyup="jsf.ajax.request(this, event, {render: 'outtext'}); return false;"/>
    <h:outputText id="outtext" value="#{back.name}"/>The name property is a simple String in the bean.
    Hope this helps
    Edited by: hereps on Aug 21, 2010 7:18 AM

  • How to change properties of an image when the state changes? (normal, rollover, mouse down, action)

    I want to enlarge image (photo) while rolling over.

    Sure, This works but copying back the button does not replace the original, it just adds a new button, so for every change, there is a new copy added. I did notice this when I wanted to change the size of the button, they were both visible !
    Pierre

  • I have 2 emails accounts one sends and receives fine with a POP account the other IMAP and I'm buggered if i know how to change it or to even check the answer from this question.  OMG is there a computer buddy who can help this idiot pleeeeease

    Firstly I apologise for my dumness when it comes to computers. 
    We have a new imac and i have tried to set up our emails.  One is setup up under POP (and is fine) and the other under IMAP, its the later that doesnt send or receive.  What do I need to do to change the setup.  I go into 'account' and where to from there??

    You can access, usually under the Apple (icon) menu in the main desktop
    window, note item with name "About this Mac" & click on that, to see more
    information about your computer, its OS X version, and other. The system
    version and build model are there. Do not post a serial number.
    If you are setting up Mail in a Mavericks OS X 10.9.x system, there often
    is access to information in the Help viewer from the main menu bar, or
    in an open mail application. If you have a Gmail or other account, that
    info is often on their home page where setup and help are located.
    The settings of each email account may vary according to their provider;
    so you would have to change your computer to accept them. An older
    link to a general look at that issue, change IMAP to POP, is covered here:
    https://discussions.apple.com/message/16770816#16770816
    While that may not answer your question, you could use the info in
    your Mac OS X system Help viewer and use its search; or maybe
    a Spotlight search to see an answer online.
    You have to learn some basic things in order to actually use these...
    and it helps to expand that so you won't have to pay for tech service
    on things you can do yourself in a few minutes, beyond easy stuff.
    Of course, you're hearing this from a guy with no ISP email, ever.
    So mine are web-mail only; & I never save email to a computer.
    PS: If you have a new Mac with an AppleCare plan, you may be able
    contact Support for help. Ask someone (for 90 days, or up to 3 years
    if the Plan was extended) there at AppleCare, for their guidance.
    http://www.apple.com/support/contact/
    Good luck & happy computing!
    edited

  • How to change automatic translation of videos to the Apple TV?

    In iTunes, videos get automatically translated to my Apple TV (3. Generation with newest OS-Version). I have every software on my Mac on the newest verion.

    Hello jakobfrommünster,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    About AirPlay Mirroring in OS X
    http://support.apple.com/kb/ht5404
    Turning AirPlay Mirroring on and off
    If your Mac supports AirPlay Mirroring, an AirPlay Mirroring menu extra appears in the menu bar when an Apple TV is on the same network. Turn on mirroring by selecting an Apple TV from the AirPlay Mirroring menu:
    Note: The AirPlay Mirroring menu extra icon is blue when AirPlay Mirroring is on.
    You can also turn it on via System Preferences > Displays:
    In Mavericks select AirPlay Display:
    To turn off AirPlay Mirroring, select "Turn Off AirPlay Mirroring" in the AirPlay Mirroring menu extra, or Off in Displays Preferences.  You can also press the Menu button on the Apple TV remote to end the current AirPlay Mirroring session.
    Best of luck,
    Mario

Maybe you are looking for