SRM 7.0, PO details are not getting populated in Contract History Tab

Hello Folks,
I am stuck with an issue and would need your help regarding that.
Scenario: (Extended Classic Scenario) SRM version 7
A catagory Contract is created.
Shopping cart created with Contract as the source of supply.
Once the SC is approved PO is generated.
Now if we open the contract and view the History tab, under Tracking PO details should appear.
However we are not getting any details of the PO in the Contract. Could you please suggest where to look, to resolve this issue.
Your inputs will be highly appreciated.
Regards
Nishant Rajvanshi

RZ20 errors:
Local Errors: Business to Business Procurement(600)
Error reading export data for EXEC transfer of purchase order
Error in local purchase order; no update of references in EXEC system
Backend Errors:
PO 3000000051: No instance of object type PurchaseOrder has been created. External reference:
Purchase order 3000000051: Document contains no items
Purchase order 3000000051: Transfer Failed; Resubmit
Since we are in SRM 7.0 ECC 6.04 Ehp 4, with PI 7.11 + ROS and no SUS.
doent the system uses ESOA Service for PO replication.
We did CCTR / CPPR scenarios too. Both are sucessful.
Do we need to impl BADI PUR_SE_PO_INTERFACE_OUT_SELECT
But thats for Service hierarchy and Service POs - We dont have Service hierarchy or SUS in our SLD.
IF PO replication also uses PI, what configuration do i need to do?

Similar Messages

Partner details are not getting captured to the purchase order from the ven

Hi,
Issue : ( ECC PO)
Partner details are not getting captured to the purchase order from the vendor master.
We found that the partners are not getting captured in ECC PO's automatically from the vendor master. We checked for all the config and everything seems to be o.k, but could not figure it out.
Any suggestions are highly appreciated.
Regards
Sudhakar

Hey Sudhakar,
I believe what is happening here is that the ECC PO document type has not been assigned to the partner determination procedure.
If this is working properly for standard POs, then,
Go to Partner detrmination under Purchasing> Partner Settings in Purchasing Documents> Assign Partner Schemas to Document Types.
and enter teh appropriate document type and refer it to the procedure you have for NB Pos

UWL : New tasks are not getting populated in the UWL

Hi Experts,
I<b> configured my uwl to my backend system , the completed tasks are getting populated in the UWL but the New tasks and in progress tasks are not getting populated in the UWL.(some thing strange).</b>
When i am trying to configure the universal worklist system ,its givin me a caution message as <b>System SHDCLNT012 does not support optimized delta pull</b> . where SHDCLNT012 is the system alias name.
Is this the problem for not populating the new tasks in the UWL?
Please provide me the solution..
Thanks & Regards,
Sateesh

Hi Sateesh,
This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
Kai

Why data are not getting poulated in dynamically added tab in a tab navigator???

Hi All,
I am facing a very strange problem and need you expert opinion on this. Ok so the problem goes like this:
In my application i have a tab navigator where i have 2 fixed tabs say tab A and tab B. In tab B I have a data grid where All the user name are getting populated. Once the user clicks on any datagrid row i am dynamically adding a new tab based on username , so if in my datagrid u1,u2 and u3 are getting displayed then once you clik on u1 a new tab called u1 is getting displayed. Code for this goes like this:
var vbox1: VBox= new VBox();
box1.label=mydatagrid.selectedItem.uName;
var sde:* = new searchDetails();
vbox1.addChild(sde);
myTabnavigator.addChild(vBox1);
Application.application.searchdetails.displayall();
I have created a component called searchDetails where i have designed the page wit various fields for this tab.This also has a method called displayall() which is populating the data in all fields using php an my sql where i have designed the page wit various fields for this tab.
New tab is getting displayed perfectly. My problem is once the tab is getting displayed fields are not getting populated with data.
Please let me know what wrong i am doing. I am really struggling

Hmm.. you have to assign text to the labelfields on creation complete not before that, the fllow will be like this
var vbox1: VBox= new VBox();
var sde:* = new searchDetails();
vbox1.addEventListener(creationcompleteevent,function);
vbox1.addChild(sde);
myTabnavigator.addChild(vBox1);
function(e:event):void{
box1.label = "text";

When inserting 2 column details in a single table using Stored Procedure.Only 2 Column details getting inserted.1column details are not getting into the table.Please see the below script and help me to change.

Line 390 Under the (Insert into SALES_TRADEIN Table)
I need to insert (TradeIn_1_VIN) Values If there is no values in (TradeIn_1_VIN) then i have to insert (TradeIn_2_VIN) values to the (SALES_TRADEIN) Table.
After i run then below script only (TradeIn_2_VIN) values are get inserted in the table. (TradeIn_1_VIN) are not getting loaded in to the table.
I think there is the problem from Line No (404 to 414) Please help me change those particular lines to insert (TradeIn_1_VIN) Values also.If there is no details then (TradeIn_2_VIN) need to be inserted.
-- =============================================
-- Stored Procedure for Flatfile_Sales
-- =============================================
USE [IconicMarketing]
---==========Sales_Cursor
--USE [IconicMarketing]
--GO
DECLARE
@FileType
varchar(50),
@ACDealerID
varchar(50),
@ClientDealerID
varchar(50),
@DMSType
varchar(50),
@DealNumber
varchar(50),
@CustomerNumber
varchar(50),
@CustomerName
varchar(50),
@CustomerFirstName
varchar(50),
@CustomerLastName
varchar(50),
@CustomerAddress
varchar(50),
@CustomerCity
varchar(50),
@CustomerState
varchar(50),
@CustomerZip
varchar(50),
@CustomerCounty
varchar(50),
@CustomerHomePhone
varchar(50),
@CustomerWorkPhone
varchar(50),
@CustomerCellPhone
varchar(50),
@CustomerPagerPhone
varchar(50),
@CustomerEmail
varchar(50),
@CustomerBirthDate
varchar(50),
@MailBlock
varchar(50),
@CoBuyerName
varchar(50),
@CoBuyerFirstName
varchar(50),
@CoBuyerLastName
varchar(50),
@CoBuyerAddress
varchar(50),
@CoBuyerCity
varchar(50),
@CoBuyerState
varchar(50),
@CoBuyerZip
varchar(50),
@CoBuyerCounty
varchar(50),
@CoBuyerHomePhone
varchar(50),
@CoBuyerWorkPhone
varchar(50),
@CoBuyerBirthDate
varchar(50),
@Salesman_1_Number
varchar(50),
@Salesman_1_Name
varchar(50),
@Salesman_2_Number
varchar(50),
@Salesman_2_Name
varchar(50),
@ClosingManagerName
varchar(50),
@ClosingManagerNumber
varchar(50),
@F_AND_I_ManagerNumber
varchar(50),
@F_AND_I_ManagerName
varchar(50),
@SalesManagerNumber
varchar(50),
@SalesManagerName
varchar(50),
@EntryDate
varchar(50),
@DealBookDate
varchar(50),
@VehicleYear
varchar(50),
@VehicleMake
varchar(50),
@VehicleModel
varchar(50),
@VehicleStockNumber
varchar(50),
@VehicleVIN
varchar(50),
@VehicleExteriorColor
varchar(50),
@VehicleInteriorColor
varchar(50),
@VehicleMileage
varchar(50),
@VehicleType
varchar(50),
@InServiceDate
varchar(50),
@HoldBackAmount
varchar(50),
@DealType
varchar(50),
@SaleType
varchar(50),
@BankCode
varchar(50),
@BankName
varchar(50),
@SalesmanCommission
varchar(50),
@GrossProfitSale
varchar(50),
@FinanceReserve
varchar(50),
@CreditLifePremium
varchar(50),
@CreditLifeCommision
varchar(50),
@TotalInsuranceReserve
varchar(50),
@BalloonAmount
varchar(50),
@CashPrice
varchar(50),
@AmountFinanced
varchar(50),
@TotalOfPayments
varchar(50),
@MSRP varchar(50),
@DownPayment
varchar(50),
@SecurityDesposit
varchar(50),
@Rebate
varchar(50),
@Term varchar(50),
@RetailPayment
varchar(50),
@PaymentType
varchar(50),
@RetailFirstPayDate
varchar(50),
@LeaseFirstPayDate
varchar(50),
@DayToFirstPayment
varchar(50),
@LeaseAnnualMiles
varchar(50),
@MileageRate
varchar(50),
@APRRate
varchar(50),
@ResidualAmount
varchar(50),
@LicenseFee
varchar(50),
@RegistrationFee
varchar(50),
@TotalTax
varchar(50),
@ExtendedWarrantyName
varchar(50),
@ExtendedWarrantyTerm
varchar(50),
@ExtendedWarrantyLimitMiles
varchar(50),
@ExtendedWarrantyDollar
varchar(50),
@ExtendedWarrantyProfit
varchar(50),
@FrontGross
varchar(50),
@BackGross
varchar(50),
@TradeIn_1_VIN
varchar(50),
@TradeIn_2_VIN
varchar(50),
@TradeIn_1_Make
varchar(50),
@TradeIn_2_Make
varchar(50),
@TradeIn_1_Model
varchar(50),
@TradeIn_2_Model
varchar(50),
@TradeIn_1_ExteriorColor
varchar(50),
@TradeIn_2_ExteriorColor
varchar(50),
@TradeIn_1_Year
varchar(50),
@TradeIn_2_Year
varchar(50),
@TradeIn_1_Mileage
varchar(50),
@TradeIn_2_Mileage
varchar(50),
@TradeIn_1_Gross
varchar(50),
@TradeIn_2_Gross
varchar(50),
@TradeIn_1_Payoff
varchar(50),
@TradeIn_2_Payoff
varchar(50),
@TradeIn_1_ACV
varchar(50),
@TradeIn_2_ACV
varchar(50),
@Fee_1_Name
varchar(50),
@Fee_1_Fee
varchar(50),
@Fee_1_Commission
varchar(50),
@Fee_2_Name
varchar(50),
@Fee_2_Fee
varchar(50),
@Fee_2_Commission
varchar(50),
@Fee_3_Name
varchar(50),
@Fee_3_Fee
varchar(50),
@Fee_3_Commission
varchar(50),
@Fee_4_Name
varchar(50),
@Fee_4_Fee
varchar(50),
@Fee_4_Commission
varchar(50),
@Fee_5_Name
varchar(50),
@Fee_5_Fee
varchar(50),
@Fee_5_Commission
varchar(50),
@Fee_6_Name
varchar(50),
@Fee_6_Fee
varchar(50),
@Fee_6_Commission
varchar(50),
@Fee_7_Name
varchar(50),
@Fee_7_Fee
varchar(50),
@Fee_7_Commission
varchar(50),
@Fee_8_Name
varchar(50),
@Fee_8_Fee
varchar(50),
@Fee_8_Commission
varchar(50),
@Fee_9_Name
varchar(50),
@Fee_9_Fee
varchar(50),
@Fee_9_Commission
varchar(50),
@Fee_10_Name
varchar(50),
@Fee_10_Fee
varchar(50),
@Fee_10_Commission
varchar(50),
@ContractDate
varchar(50),
@InsuranceName
varchar(50),
@InsuranceAgentName
varchar(50),
@InsuranceAddress
varchar(50),
@InsuranceCity
varchar(50),
@InsuranceState
varchar(50),
@InsuranceZip
varchar(50),
@InsurancePhone
varchar(50),
@InsurancePolicyNumber
varchar(50),
@InsuranceEffectiveDate
varchar(50),
@InsuranceExpirationDate
varchar(50),
@InsuranceCompensationDeduction
varchar(50),
@TradeIn_1_InteriorColor
varchar(50),
@TradeIn_2_InteriorColor
varchar(50),
@PhoneBlock
varchar(50),
@LicensePlateNumber
varchar(50),
@Cost varchar(50),
@InvoiceAmount
varchar(50),
@FinanceCharge
varchar(50),
@TotalPickupPayment
varchar(50),
@TotalAccessories
varchar(50),
@TotalDriveOffAmount
varchar(50),
@EmailBlock
varchar(50),
@ModelDescriptionOfCarSold
varchar(50),
@VehicleClassification
varchar(50),
@ModelNumberOfCarSold
varchar(50),
@GAPPremium
varchar(50),
@LastInstallmentDate
varchar(50),
@CashDeposit
varchar(50),
@AHPremium
varchar(50),
@LeaseRate
varchar(50),
@DealerSelect
varchar(50),
@LeasePayment
varchar(50),
@LeaseNetCapCost
varchar(50),
@LeaseTotalCapReduction
varchar(50),
@DealStatus
varchar(50),
@CustomerSuffix
varchar(50),
@CustomerSalutation
varchar(50),
@CustomerAddress2
varchar(50),
@CustomerMiddleName
varchar(50),
@GlobalOptOut
varchar(50),
@LeaseTerm
varchar(50),
@ExtendedWarrantyFlag
varchar(50),
@Salesman_3_Number
varchar(50),
@Salesman_3_Name
varchar(50),
@Salesman_4_Number
varchar(50),
@Salesman_4_Name
varchar(50),
@Salesman_5_Number
varchar(50),
@Salesman_5_Name
varchar(50),
@Salesman_6_Number
varchar(50),
@Salesman_6_Name
varchar(50),
@APRRate2
varchar(50),
@APRRate3
varchar(50),
@APRRate4
varchar(50),
@Term2
varchar(50),
@SecurityDeposit2
varchar(50),
@DownPayment2
varchar(50),
@TotalOfPayments2
varchar(50),
@BasePayment
varchar(50),
@JournalSaleAmount
varchar(50),
@IndividualBusinessFlag
varchar(50),
@InventoryDate
varchar(50),
@StatusDate
varchar(50),
@ListPrice
varchar(50),
@NetTradeAmount
varchar(50),
@TrimLevel
varchar(50),
@SubTrimLevel
varchar(50),
@BodyDescription
varchar(50),
@BodyDoorCount
varchar(50),
@TransmissionDesc
varchar(50),
@EngineDesc
varchar(50),
@TypeCode
varchar(50),
@SLCT2
varchar(50),
@DealDateOffset
varchar(50),
@AccountingDate
varchar(50),
@CoBuyerCustNum
varchar(50),
@CoBuyerCell
varchar(50),
@CoBuyerEmail
varchar(50),
@CoBuyerSalutation
varchar(50),
@CoBuyerPhoneBlock
varchar(50),
@CoBuyerMailBlock
varchar(50),
@CoBuyerEmailBlock
varchar(50),
@RealBookDate
varchar(50),
@CoBuyerMiddleName
varchar(50),
@CoBuyerCountry
varchar(50),
@CoBuyerAddress2
varchar(50),
@CoBuyerOptOut
varchar(50),
@CoBuyerOccupation
varchar(50),
@CoBuyerEmployer
varchar(50),
@Country
varchar(50),
@Occupation
varchar(50),
@Employer
varchar(50),
@Salesman2Commission
varchar(50),
@BankAddress
varchar(50),
@BankCity
varchar(50),
@BankState
varchar(50),
@BankZip
varchar(50),
@LeaseEstimatedMiles
varchar(50),
@AFTReserve
varchar(50),
@CreditLifePrem
varchar(50),
@CreditLifeRes
varchar(50),
@AHRes
varchar(50),
@Language
varchar(50),
@BuyRate
varchar(50),
@DMVAmount
varchar(50),
@Weight
varchar(50),
@StateDMVTotFee
varchar(50),
@ROSNumber
varchar(50),
@Incentives
varchar(50),
@CASS_STD_LINE1
varchar(50),
@CASS_STD_LINE2
varchar(50),
@CASS_STD_CITY
varchar(50),
@CASS_STD_STATE
varchar(50),
@CASS_STD_ZIP
varchar(50),
@CASS_STD_ZIP4
varchar(50),
@CASS_STD_DPBC
varchar(50),
@CASS_STD_CHKDGT
varchar(50),
@CASS_STD_CART
varchar(50),
@CASS_STD_LOT
varchar(50),
@CASS_STD_LOTORD
varchar(50),
@CASS_STD_URB
varchar(50),
@CASS_STD_FIPS
varchar(50),
@CASS_STD_EWS
varchar(50),
@CASS_STD_LACS
varchar(50),
@CASS_STD_ZIPMOV
varchar(50),
@CASS_STD_Z4LOM
varchar(50),
@CASS_STD_NDIAPT
varchar(50),
@CASS_STD_NDIRR
varchar(50),
@CASS_STD_LACSRT
varchar(50),
@CASS_STD_ERROR_CD
varchar(50),
@NCOA_AC_ID
varchar(50),
@NCOA_COA_ADDSRC
varchar(50),
@NCOA_COA_MATCH
varchar(50),
@NCOA_COA_MOVTYP
varchar(50),
@NCOA_COA_DATE
varchar(50),
@NCOA_COA_DELCD
varchar(50),
@NCOA_COA_RTYPE
varchar(50),
@NCOA_COA_RTNCD
varchar(50),
@NCOA_COA_LINE1
varchar(50),
@NCOA_COA_LINE2
varchar(50),
@NCOA_COA_CITY
varchar(50),
@NCOA_COA_STATE
varchar(50),
@NCOA_COA_ZIP
varchar(50),
@NCOA_COA_ZIP4
varchar(50),
@NCOA_COA_DPBC
varchar(50),
@NCOA_COA_CHKDGT
varchar(50),
@NCOA_COA_CART
varchar(50),
@NCOA_COA_LOT
varchar(50),
@NCOA_COA_LOTORD
varchar(50),
@NCOA_COA_URB
varchar(50),
@NCOA_COA_Z4LOM
varchar(50),
@NCOA_COA_ACTION
varchar(50),
@NCOA_COA_QNAME
varchar(50),
@NCOA_DPV_AA
varchar(50),
@NCOA_DPV_A1
varchar(50),
@NCOA_DPV_BB
varchar(50),
@NCOA_DPV_CC
varchar(50),
@NCOA_DPV_M1
varchar(50),
@NCOA_DPV_M3
varchar(50),
@NCOA_DPV_N1
varchar(50),
@NCOA_DPV_P1
varchar(50),
@NCOA_DPV_P3
varchar(50),
@NCOA_DPV_RR
varchar(50),
@NCOA_DPV_R1
varchar(50),
@NCOA_DPV_STATUS
varchar(50),
@NCOA_DPV_F1
varchar(50),
@NCOA_DPV_G1
varchar(50),
@NCOA_DPV_U1
varchar(50),
@myerror
varchar(500),
@SalesID
int,
@errornumber int,
@errorseverity varchar(500),
@errorstate int,
@errorprocedure varchar(500),
@errorline varchar(50),
@errormessage varchar(1000);
DECLARE Sales_Cursor CURSOR FOR
SELECT * from FLATFILE_SALES;
OPEN Sales_Cursor;
:r C:\Clients\BlackBook\BlackBookMarketing\Bharath\LOG_SALES_INSERT.sql
WHILE @@FETCH_STATUS = 0
BEGIN
PRINT @VehicleVIN ;
--===============================================================================
-- ****************** insert into Sales Table ***********
BEGIN TRY
INSERT INTO Sales
IconicDealerID,
DealNumber,
CustomerNumber,
DMSType,
ContractDate
VALUES (@ClientDealerID,@DealNumber,@CustomerNumber,@DMSType,@ContractDate);
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER()
,@errorseverity = ERROR_SEVERITY()
,@errorstate = ERROR_STATE()
,@errorprocedure = ERROR_PROCEDURE()
,@errorline = ERROR_LINE()
,@errormessage = ERROR_MESSAGE();
:r C:\Clients\BlackBook\BlackBookMarketing\Bharath\LOG_SALES_INSERT.sql
@errornumber ,
@errorseverity ,
@errorstate,
@errorprocedure,
@errorline,
@errormessage);
END CATCH
PRINT @errornumber;
PRINT @errorseverity;
PRINT @errorprocedure;
PRINT @errorline;
PRINT @errormessage;
PRINT @errorstate;
set @myerror = @@ERROR;
-- This PRINT statement prints 'Error = 0' because
-- @@ERROR is reset in the IF statement above.
PRINT N'Error = ' + @myerror;
set @SalesID = scope_identity();
PRINT @SalesID;
--================================================================================
--Insert into SALES_TRADEIN Table
BEGIN TRY
INSERT INTO SALES_TRADEIN
SalesID,
TradeIn_VIN,
TradeIn_Make,
TradeIn_Model,
TradeIn_ExteriorColor,
TradeIn_Year,
TradeIn_Mileage,
TradeIn_Gross,
TradeIn_Payoff,
TradeIn_ACV,
TradeIn_InteriorColor
VALUES
@SalesID,
case when @TradeIn_1_VIN is not null then @TradeIn_2_VIN end,
case when @TradeIn_1_Make is not null then @TradeIn_2_Make end,
case when @TradeIn_1_Model is not null then @TradeIn_2_Model end,
case when @TradeIn_1_ExteriorColor is not null then @TradeIn_2_ExteriorColor end,
case when @TradeIn_1_Year is not null then @TradeIn_2_Year end,
case when @TradeIn_1_Mileage is not null then @TradeIn_2_Mileage end,
case when @TradeIn_1_Gross is not null then @TradeIn_2_Gross end,
case when @TradeIn_1_Payoff is not null then @TradeIn_2_Payoff end,
case when @TradeIn_1_ACV is not null then @TradeIn_2_ACV end,
case when @TradeIn_1_InteriorColor is not null then @TradeIn_2_InteriorColor end
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER()
,@errorseverity = ERROR_SEVERITY()
,@errorstate = ERROR_STATE()
,@errorprocedure = ERROR_PROCEDURE()
,@errorline = ERROR_LINE()
,@errormessage = ERROR_MESSAGE();
:r C:\Clients\BlackBook\BlackBookMarketing\Bharath\LOG_SALES_INSERT.sql
END CATCH

This is what I've understood from your question. You want to replace @TradeIn_2_VIN value if @TradeIn_1_VIN
is NULL, else the value of @TradeIn_1_VIN.
If this is the requirement then, your CASE statement is missing ELSE part. You can re-write this as below
case when @TradeIn_1_VIN is null then @TradeIn_2_VIN
ELSE @TradeIn_1_VIN end,
or simply you can replace the CASE statement with the below
COALESCE function,
COALESCE(@TradeIn_1_VIN, @TradeIn_2_VIN),
Krishnakumar S

Change Pointers are not getting populated in BDCPV table.

Hi All,
         I am trying to create IDOC for Activity type master - KL02 through change pointers. For that I have done following things.
Message type - COAMAS
1. Created Custom message type - WE81 - ZIN_COAMAS_TCSMOBILE
2. WE82 - Config for Mess Type and Idoc type combination
3. SCDO - Checked object type LSTAR and have required tables in that object.
4. BD61 - Activated Change pointers - Generally.
5. BD50 - Checked Active for ZIN_COAMAS_TCSMOBILE
6. BD52 - Added fields for I want to create Change pointers
7. BD60 - Message type and ref Mesage Type and function module config.
8. BD64 - Created distribution model for my Message type
After doing all this settings the change pointers are not getting created in BDCP and BDCPV tables.
Note - The entries are going in CDHDR and CDPOS table for activity which i change through KL02 for class LSTAR
Can anybody figure out what need to be done in this case?
Regards,
Gautam Joshi.

Hi All,
          Solved the problem myself.
          In BD52 I have given
          LSTAR               CSLA         KOARS
          LSTAR               CSLA         LSTAR
          LSTAR               CSLT          KTEXT
          Here the data of activity are stored in TCLA and TCLT tables. So intially while doing config in BD52 I have given TCLA and TCLT table names.
          But I debugged the KL02 and found that change pointers are not created for TCLA and TCLT table. further looking into CDHDr and CDPOS table I found that for COAMAS message type in these two tables table name was CSLAB.
CDPOS entry
LSTAR
3166442
119512890
*CSLAB*
2003166442   2400123120000101
KTEXT
U
--> BUT CSLAB is structure.
After putting these entry in BD52 the problem solved.
LSTAR     CSLAB     KOKRS
LSTAR     CSLAB     KTEXT
LSTAR     CSLAB     LSTAR
Regards,
Gautam Joshi.

CCS Details are not getting updated to COPA in Sales Order Settlement(VA88)

Dear Experts,
Our scenario is MTO with valuated material.
1. Production order is tagged to Sales Order.
2. Production order is settled to Material and variance is getting posted to COPA.
3. At the time of Delivery, COGS Debit (Cost Object- Sales Order), Credit - Inventory.
4. At the time of Billing, Accounting Document is getting generated, COPA document is not getting generated.
5. We are not executing WIP. (as per Business process)
6. Settlement is done thru transaction code VA88. COPA Document is getting generated.
I am facing the following issues in the above MTO process.
1. At time of sales order settlement thru VA88, In COPA, only COGS is getting as updated with one value field i.e. Material Cost. Cost Component data (Material Depreciation, Labor etc..) is not getting updated to COPA.
2. When I settle the Sales Order thru VA88, Billing Quantity is not getting updated to COPA though Quantity field mapping is done properly.
Please help me how to resolve the above issues.
Note: Same Cost Component Structure, we are using for Make to Stock scenario. Cost Component Data is getting updated Properly to COPA (at the time of Billing)
Regards,
vgl
Edited by: vglokam on Aug 31, 2010 10:52 AM
Edited by: vglokam on Aug 31, 2010 10:54 AM

Hi
1. CCS (Cost Comp Split) wont be updated to COPA if you settle via sale order.. In sale order, COGS cost element is posted.. the same will get settled to COPA as one single value...
In MTS, the CCS gets updated to COPA upon billing because of the "valuation" strategy customization... Billing posts to COPA in that case, COPA gets Sales Qty and it is valuated with CCS to give you the break up.. But, in your case, Billing is not posting to COPA, but to sales order.. hence, there is no qty flow into COPA upon billing.. thats why you dont get CCS for MTO
2. The sales qty should be updated to COPA upon VA88.. For this, make the following settings in your PA transfer structure which is used during VA88
1. Go to KEI1, Select your PA transfer structure...
2. Add an assignment line in it... Check on "Qty Billed/Delivered" in the assignment line
3. In the Tab "Value Field" below "source", assign Qty Field
Now when you settle, it should update qty as well
regards
Ajay M

HT201269 while transferring data from iphone 3GS to iphone 4S SMS details are not getting transferred.

While transferring data from old iphone 3gs to new iphone4s through itunes the data in messages is not getting transferred.

@ melfromvictoria
Have you tried right clicking on the 4s and select "restore from back up"

Resource details are not getting displayed in gantt chart -- R12 instance

Hi All,
we are working on a scenarior in R12 instance.
when we run a resource constraint plan and navigate to Gantt chart the complete application is getting hanged and it is not Displaying any resource details.
Before 2 days we were able to view the Gantt chart and resource details were populating properly.
Resource Avalability and usage is correct.
Thanks,
Vasudha

Hi
In R12 Gantt chart is enhanced to show resource gantt in 3 different view. Res units view,resource hours view and res availability view.
Please do the following and see if it works.
On work bench go to Tools , preferences > set gantt chart preferences. even if u want to leave them as default, uncheck something save., and check again and save.
Let me know if it works.
Tnx
Partha

When inserting 3 column details in a single table using Stored Procedure.Only 1 Column details getting inserted.Other 2 Column details are not getting into the table.Please see the below script and help me to change.

From the Parent Table i need to insert rows which are all under this column {(TradeIn_1_VIN),(TradeIn_2_VIN),(TradeIn_3_VIN) } into SALES_TRADEIN Table .
I have used the below Query,
But it reads only (TradeIn _1_Vin) Column in the SALES_TRADEIN table rest 2 records got skipped..
INSERT INTO SALES_TRADEIN
SalesID,
TradeIn_VIN,
TradeIn_Make,
TradeIn_Model,
TradeIn_ExteriorColor,
TradeIn_Year,
TradeIn_Mileage,
TradeIn_Gross,
TradeIn_Payoff,
TradeIn_ACV,
TradeIn_InteriorColor
VALUES
@SalesID,
case when @TradeIn_1_VIN is null then @TradeIn_2_VIN else @TradeIn_1_VIN end,
case when @TradeIn_1_Make is null then @TradeIn_2_Make else @TradeIn_1_Make end,
case when @TradeIn_1_Model is null then @TradeIn_2_Model else @TradeIn_1_Model end,
case when @TradeIn_1_ExteriorColor is null then @TradeIn_2_ExteriorColor else @TradeIn_1_ExteriorColor end,
case when @TradeIn_1_Year is null then @TradeIn_2_Year else @TradeIn_1_Year end,
case when @TradeIn_1_Mileage is null then @TradeIn_2_Mileage else @TradeIn_1_Mileage end,
case when @TradeIn_1_Gross is null then @TradeIn_2_Gross else @TradeIn_1_Gross end,
case when @TradeIn_1_Payoff is null then @TradeIn_2_Payoff else @TradeIn_1_Payoff end,
case when @TradeIn_1_ACV is null then @TradeIn_2_ACV else @TradeIn_1_ACV end,
case when @TradeIn_1_InteriorColor is null then @TradeIn_2_InteriorColor else @TradeIn_1_InteriorColor end
END TRY
Actually my problem is
If [(TradeIn_1_VIN),(TradeIn_2_VIN),(TradeIn_3_VIN)] these 3 columns have details i need all the 3 columns details need to be read to SALES_TRADEIN table.
Suppose if we have data only in [(TradeIn_1_VIN),(TradeIn_2_VIN)] then these column details need to loaded in the SALES_TRADEIN table.
If any columns are blank no problem it can move next process.
Please help me change those particular lines to insert all the 3 records (TradeIn_1_VIN) (TradeIn_2_VIN) (TradeIn_3_VIN) in to the table.

From SQL2008 on, besides INSERT-SELECT, and INSERT-EXEC, the INSERT-VALUES form of the insert command is improved. It can insert multiple rows like this:
INSERT INTO my_table(MyColA, MyColB)
VALUES
(1, 1),
(2, 2),
(3, 3)
You could also use that in SELECTs, like this:
SELECT *
FROM
( VALUES (1,2), (3,4)
) t(a, b)

Sap ecc 6.0 functional area not getting populated on controlling allocation

Gurus,
Your expertise is very much required.
new gl not activated...
public sector not used
cost of sales activated
functional area field is not visible on ksv1 or distribution cycle, same for assessment.
Kindly help.

I tried KCAV, "get standard values"..
no help... it still not showing on ksv1

Radio Buttons are not getting populated

Hi
this is my program...
plz can any one tell me wt is wrong in my program?
my problm is wn i select " 2 line 2 " in drop down list Radio button 1 and Radio Button 2 should be
invisible and it should display only Radio Button 3....
bt in my program it is not happening....
TABLES: sscrfields.
DATA: name TYPE vrm_id,
      list TYPE vrm_values,
      value LIKE LINE OF list.
PARAMETERS: ps_parm AS LISTBOX VISIBLE LENGTH 10 USER-COMMAND abc.
PARAMETERS: r1 RADIOBUTTON GROUP ab MODIF ID bl2,
            r2 RADIOBUTTON GROUP ab MODIF ID bl2,
            r3 RADIOBUTTON GROUP ab MODIF ID bl3.
INITIALIZATION.
name = 'ps_parm'.
value-key = '1'. value-text = 'line 1'. APPEND value TO list.
value-key = '2'. value-text = 'line 2'. APPEND value TO list.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id     = name
      values = list.
LOOP AT SCREEN.
    IF ps_parm = 1.
      IF screen-name = 'r1' OR screen-name = 'r2'.
        screen-invisible = 0.
      ELSEIF screen-name = 'r3'.
        screen-invisible = 1.
      ENDIF.
      MODIFY SCREEN.
    ELSEIF ps_parm = 2.
      IF screen-name = 'r1' OR screen-name = 'r2'.
        screen-invisible = 1.
      ELSEIF screen-name = 'r3'.
        screen-invisible = 0.
      ENDIF.
      MODIFY SCREEN.
    ELSEIF ps_parm = space.
      r1 = 'X'.
      CLEAR: r2,r3.
      IF screen-name = 'r1' OR screen-name = 'r2' OR
         screen-name = r3.
        screen-invisible = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDIF.
ENDLOOP.
AT SELECTION-SCREEN.
IF sscrfields-ucomm = 'abc'.
ENDIF.
START-OF-SELECTION.
WRITE: / 'Parameter:', ps_parm.

Hi,
two things you have to do is ,
1.Loot at acreen should be inside At-Selection screen output event.
2.The values inside quotes should be in uppercase for screen-name. Ex. Screen-name = 'R1'.
3. Clear the radiobutton values before Loop at screen to avoid dump when line 1 is selected .
INITIALIZATION.
name = 'ps_parm'.
value-key = '1'. value-text = 'line 1'. APPEND value TO list.
value-key = '2'. value-text = 'line 2'. APPEND value TO list.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = name
values = list.
At SELECTION-SCREEN OUTPUT.
clear :r1,r2,r3.
LOOP AT SCREEN.
IF ps_parm = 1.
IF screen-name = 'R1' OR screen-name = 'R2'.
screen-invisible = 0.
ELSEIF screen-name = 'R3'.
screen-invisible = 1.
ENDIF.
MODIFY SCREEN.
ELSEIF ps_parm = 2.
IF screen-name = 'R1' OR screen-name = 'R2'.
screen-invisible = 1.
ELSEIF screen-name = 'R3'.
screen-invisible = 0.
ENDIF.
MODIFY SCREEN.
ELSEIF ps_parm = space.
r1 = 'X'.
CLEAR: r2,r3.
IF screen-name = 'R1' OR screen-name = 'R2' OR
screen-name = 'R3'.
screen-invisible = 0.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
AT SELECTION-SCREEN.
IF sscrfields-ucomm = 'abc'.
ENDIF.
START-OF-SELECTION.
WRITE: / 'Parameter:', ps_parm.
Regards,
Hema.

Assessable value and the Excise details are NOT coming in MIGO

We are facing problem that assessable value and the Excise details are NOT getting populated automatically when doing MIGO in IN03 plant.We have a STO from a DC to plant. We created the outbound delivery and then captured the excise invoice using J1IJ.In migo we give the reference of this excise invoice in the excise invoice tab then the values calculated should flow in MIGO.This is not happening and user have to manually calculate the tax and put in the system.
I have followed the following steps
1. Create STO PO ME21N
2. Create outbound delivery using VL10B
3. Do the PGI using VL02N
4. Capture the exice invoice using J1IJ in depot
5. Do MIGO and give the reference of the excise invoice created

Hi,
In STO, your supplying plant is your Vendor for the receiving plant. Hence, you have to maintain the supplying plant as vendor also. Pl. check in table J1ID that the vendor data is maintained for the supplying plant.
Regards,
Prashant

Users details not getting populated in the portal tables..

Hi,
We have implemented single sign on (SSO) and we do not create users in the portal as user/pwd come from OID.
Now becoz of this the portal tables are not getting populated.I require that all the users of the OID to be populated in the portal tables. How can I do it.I depserately require it.

You can use the function wwsec_api.activate_portal_user to create the shadow records in the portal repository.
Ref. : http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1014/wwsec_api.html

Portal events are not getting loaded into the Analytics database tables

Analytics database ASFACT tables (ASFACT_PAGEVIEWS,ASFACT_PORLETVIEW) are not getting populated with data.
Possible diagnosis/workarounds tried:
-Checked the analytics configuration in configuration manager, Enable Analytics Communication option checked
-Registered Portal Events during analytics installation
-Verified that UDP events are sent out from the portal: Test: OK
-Reinstalled Interaction analytics component
Any inputs highly appreciated.
Cheers,
Sandeep
In collector.log, found the exception:
08 Jul 2010 07:12:54,613 ERROR PageViewHandler - could not retrieve user: com.plumtree.analytics.collector.exception.DimensionManagerException: Could not insert dimension in the database
com.plumtree.analytics.collector.exception.DimensionManagerException: Could not insert dimension in the database
at com.plumtree.analytics.collector.cache.DimensionManager.insertDB(DimensionManager.java:271)
at com.plumtree.analytics.collector.cache.DimensionManager.manageDBImage(DimensionManager.java:139)
at com.plumtree.analytics.collector.cache.DimensionManager.handleNewDimension(DimensionManager.java:85)
at com.plumtree.analytics.collector.eventhandler.BaseEventHandler.insertDimension(BaseEventHandler.java:63)
at com.plumtree.analytics.collector.eventhandler.BaseEventHandler.getUser(BaseEventHandler.java:198)
at com.plumtree.analytics.collector.eventhandler.PageViewHandler.handle(PageViewHandler.java:71)
at com.plumtree.analytics.collector.DataResolver.handleEvent(DataResolver.java:165)
at com.plumtree.analytics.collector.DataResolver.run(DataResolver.java:126)
Caused by: org.hibernate.MappingException: Unknown entity: com.plumtree.analytics.core.persist.BaseCustomEventDimension$$BeanGeneratorByCGLIB$$6a0493c4
at org.hibernate.impl.SessionFactoryImpl.getEntityPersister(SessionFactoryImpl.java:569)
at org.hibernate.impl.SessionImpl.getEntityPersister(SessionImpl.java:1086)
at org.hibernate.event.def.AbstractSaveEventListener.saveWithGeneratedId(AbstractSaveEventListener.java:83)
at org.hibernate.event.def.DefaultSaveOrUpdateEventListener.saveWithGeneratedOrRequestedId(DefaultSaveOrUpdateEventListener.java:184)
at org.hibernate.event.def.DefaultSaveEventListener.saveWithGeneratedOrRequestedId(DefaultSaveEventListener.java:33)
at org.hibernate.event.def.DefaultSaveOrUpdateEventListener.entityIsTransient(DefaultSaveOrUpdateEventListener.java:173)
at org.hibernate.event.def.DefaultSaveEventListener.performSaveOrUpdate(DefaultSaveEventListener.java:27)
at org.hibernate.event.def.DefaultSaveOrUpdateEventListener.onSaveOrUpdate(DefaultSaveOrUpdateEventListener.java:69)
at org.hibernate.impl.SessionImpl.save(SessionImpl.java:481)
at org.hibernate.impl.SessionImpl.save(SessionImpl.java:476)
at com.plumtree.analytics.collector.cache.DimensionManager.insertDB(DimensionManager.java:266)
... 7 more
In analyticsui.log, found the exception below:
08 Jul 2010 06:50:25,910 ERROR Configuration - Could not compile the mapping document
org.hibernate.MappingException: duplicate import: com.plumtree.analytics.core.persist.BaseCustomEventFact$$BeanGeneratorByCGLIB$$6a896b0d
at org.hibernate.cfg.Mappings.addImport(Mappings.java:105)
at org.hibernate.cfg.HbmBinder.bindPersistentClassCommonValues(HbmBinder.java:541)
at org.hibernate.cfg.HbmBinder.bindClass(HbmBinder.java:488)
at org.hibernate.cfg.HbmBinder.bindRootClass(HbmBinder.java:234)
at org.hibernate.cfg.HbmBinder.bindRoot(HbmBinder.java:152)
at org.hibernate.cfg.Configuration.add(Configuration.java:362)
at org.hibernate.cfg.Configuration.addXML(Configuration.java:317)
at com.plumtree.analytics.core.HibernateUtil.loadEventMappings(HibernateUtil.java:796)
at com.plumtree.analytics.core.HibernateUtil.loadEventMappings(HibernateUtil.java:652)
at com.plumtree.analytics.core.HibernateUtil.refreshCustomEvents(HibernateUtil.java:496)
at com.plumtree.analytics.ui.common.AnalyticsInitServlet.init(AnalyticsInitServlet.java:104)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1161)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:981)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4045)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4351)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:771)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:525)
at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:920)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:883)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:492)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1138)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:117)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1053)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:719)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
at org.apache.catalina.core.StandardService.start(StandardService.java:516)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:566)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.plumtree.container.Bootstrap.start(Bootstrap.java:531)
at com.plumtree.container.Bootstrap.main(Bootstrap.java:254)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.tanukisoftware.wrapper.WrapperStartStopApp.run(WrapperStartStopApp.java:238)
at java.lang.Thread.run(Thread.java:595)
08 Jul 2010 06:50:25,915 ERROR Configuration - Could not configure datastore from XML
org.hibernate.MappingException: duplicate import: com.plumtree.analytics.core.persist.BaseCustomEventFact$$BeanGeneratorByCGLIB$$6a896b0d
at org.hibernate.cfg.Mappings.addImport(Mappings.java:105)
at org.hibernate.cfg.HbmBinder.bindPersistentClassCommonValues(HbmBinder.java:541)
at org.hibernate.cfg.HbmBinder.bindClass(HbmBinder.java:488)
at org.hibernate.cfg.HbmBinder.bindRootClass(HbmBinder.java:234)
at org.hibernate.cfg.HbmBinder.bindRoot(HbmBinder.java:152)
at org.hibernate.cfg.Configuration.add(Configuration.java:362)
at org.hibernate.cfg.Configuration.addXML(Configuration.java:317)
at com.plumtree.analytics.core.HibernateUtil.loadEventMappings(HibernateUtil.java:796)
at com.plumtree.analytics.core.HibernateUtil.loadEventMappings(HibernateUtil.java:652)
at com.plumtree.analytics.core.HibernateUtil.refreshCustomEvents(HibernateUtil.java:496)
at com.plumtree.analytics.ui.common.AnalyticsInitServlet.init(AnalyticsInitServlet.java:104)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1161)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:981)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4045)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4351)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:771)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:525)
at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:920)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:883)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:492)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1138)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:117)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1053)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:719)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
at org.apache.catalina.core.StandardService.start(StandardService.java:516)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:566)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.plumtree.container.Bootstrap.start(Bootstrap.java:531)
at com.plumtree.container.Bootstrap.main(Bootstrap.java:254)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.tanukisoftware.wrapper.WrapperStartStopApp.run(WrapperStartStopApp.java:238)
at java.lang.Thread.run(Thread.java:595)
wrapper_collector.log
INFO | jvm 1 | 2009/11/10 17:25:22 | at com.plumtree.analytics.collector.eventhandler.PortletViewHandler.handle(PortletViewHandler.java:46)
INFO | jvm 1 | 2009/11/10 17:25:22 | at com.plumtree.analytics.collector.DataResolver.handleEvent(DataResolver.java:165)
INFO | jvm 1 | 2009/11/10 17:25:22 | at com.plumtree.analytics.collector.DataResolver.run(DataResolver.java:126)
INFO | jvm 1 | 2009/11/10 17:25:22 | Caused by: java.sql.SQLException: [plumtree][Oracle JDBC Driver][Oracle]ORA-00001: unique constraint (ANALYTICSDBUSER.IX_USERBYUSERID) violated
INFO | jvm 1 | 2009/11/10 17:25:22 |
INFO | jvm 1 | 2009/11/10 17:25:22 | at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source)

Key words from the error msg suggests reinstallation of Analytics is needed to resolve this.Analytics database is failing to get updated with the correct event mapping and this is why no data is being inserted.
"Could not insert dimension in the database",
"ERROR Configuration - Could not configure datastore from XML
org.hibernate.MappingException: duplicate import: com.plumtree.analytics.core.persist.BaseCustomEventFact$$BeanGeneratorByCGLIB$$6a896b0d"
"ORA-00001: unique constraint (ANALYTICSDBUSER.IX_USERBYUSERID) violated",
"ERROR Configuration - Could not compile the mapping document

SRM 7.0, PO details are not getting populated in Contract History Tab

Similar Messages

Maybe you are looking for