SRM 7.0 problem with workflow

Hello, please I am working in SRM 7.0 and when I create a SC, or PO, or any other purchasing document in the system I had documents in awaiting approval status, all are in awaiting approval by the system.
In status appears as awaiting approval and the responsible is the system and the approval process is automatic...
Please can you help me?
What can I do to create a SC without approval?
Thanks in advance
Rosa

Hi Jr. SRM , Amit and other ,
I'm also facing same problem . I don't want approval WF for timebing for testing in SRM7.0. I activated BC set /SAPSRM/C_<BO>_600_000_SP04 and Ev Id as it is 3EV_SC_700_002.since suggeted ID '0EV999' didn;t worked , but still giving error "No active process levels have been found ".
In Config guide it is given that by applying BC Sets, you do not need to perform configuration steps below i.e. 1.Define technical configuration ,2.Define settings for Business Rule Framework (BRF) 3.Define business process configuration for process-controlled workflows....so why we need to perform Automatic Workflow Customizing and generalize the task group '40000003' and '40000007' ?
Can you/anyone pls suggest on this please ?
Regards
NAP

Similar Messages

Experiencing problems with workflow- validate step

I am experiencing problems with workflow->validate step in Hyperion FDM.
I am not able to export unmapped dimension members to Excel.
Earlier everything worked fine.
But now all of a sudden it has become a serious problem.
when I click Export to Excel,processing starts and it's never coming to an end.
Every thing is getting stuck up.
Could any one suggest solution to this as it is delaying my deliverable.

Try opening excel first, then doing the export from FDM.

Problem with workflow manager after restore from dump

Hi,
I updated my development environment from my dump production (restore full from dump). I restore my applicative schemas and aslo the schema owf_mgr which is used by my application.
I've got a problem with three views that I cannot recompile....
WF_USERS, WF_ROLES, WF_USER_ROLES
The errore message is ORA-00942 : Table or view doesn't exist.
How can I solve my issue ? Do I miss something
Thanks for your help !

Which version of Oracle Workflow Standalone do you use?
The views are based on workflow tables such as WF_LOCAL_USERS, WF_LOCAL_ROLES, WF_LOCAL_USER_ROLES and DBA dictionary DBA_USERS. Please check if these are available in OWF_MGR schema.
Hope this helps.
Vijay

SRM 7.0: problem with save BP customer fields

Hi Experts,
I've enhanced the Supplier data with customer fields in SRM 7.0 with help of OSS note 1386310.
(it was mentioned in thread Enhance business partner in SRM 7.0)
When I fill customer fields with data on BP overview screen and save, the message "Business Partner changed successfully." appears, but the customer fields data is not saving in database table BUT000.
I've find out that customer data saves in FM BUPA_CENTRAL_EXTINCL_CHANGE. In this FM is a check if include CI_EEW_BUT000 exist in Structure INCL_EEW_BUT000. The check is unsuccessful and program leaves this FM.
When I open INCL_EEW_BUT000, the include CI_EEW_BUT000 exist there, but when I double click on it, message "Structure not available" appears.
Can somebody help with it? Maybe someone is already had this problem?
Thanks,
Ekaterina.

Hi Jr. SRM , Amit and other ,
I'm also facing same problem . I don't want approval WF for timebing for testing in SRM7.0. I activated BC set /SAPSRM/C_<BO>_600_000_SP04 and Ev Id as it is 3EV_SC_700_002.since suggeted ID '0EV999' didn;t worked , but still giving error "No active process levels have been found ".
In Config guide it is given that by applying BC Sets, you do not need to perform configuration steps below i.e. 1.Define technical configuration ,2.Define settings for Business Rule Framework (BRF) 3.Define business process configuration for process-controlled workflows....so why we need to perform Automatic Workflow Customizing and generalize the task group '40000003' and '40000007' ?
Can you/anyone pls suggest on this please ?
Regards
NAP

Problem with WorkFlow of Purchase Orders related to non active employees

Dear all,
We are running into issues with the WorkFlow when people are linked to a PO who are not anymore an active employee. That will give problems in the workflow as those people are logically not going to goods receipt/invoice reciept/approve those invoices.
How should we deal with this problem?
We are thinking about a solution like creating an overview of ALL purchase orders (without Goods Receipt) in which the creator, project manager or project sponsor of that specific PO is not anymore an active employee.
Could someone please advise the right solution?
Thanks in advance.

Experts? Anyone?

Problem with workflow to control mitigating RAR to CUP

We have configured in RAR, the workflow to send request for approval of Mitigation Owner using CUP Workflow. For Mitigation Control Using RAR work fine, but unfortunately when we mitigated the Risks through the CUP request, the workflow of Mitigation Control was not started.
Workflow: USER > MANAGER > ROLE OWNER.
Workflow with risk: USER>MANAGER> MITIGATION OWNER> ROLE OWNER (We have problem to send the request for Mitigation Owner).
In the attached file has the details of this problem.
Let me know if you need any other information.
Best Regards,
William Pantaleao

Yes, it is configured correctly misc.
Thanks
William Pantaleã

Problems with Workflow (stoppings, dumps)

Hello all.
The problem description:
In our client system (ERP 701 Win Oracle 10.2, sap_aba - 5, sap_basis - 5, sap_appl - 14) we have this problem from time to time (1 time to 30 processes).
We have developed our own workflow. In all other client's systems all are ok.
But here the workflow process has hanged at the step of creation
business object instance (status waiting). We have dump from user WF-BATCH (MESSAGE_TYPE_X - "Termination occurred in the ABAP program "CL_SWF_RUN_TRANSACTION_MANAGERCP" - in "SAVE".The main program was "SAPMSSY1 "). SWU3 is whole customized. In transaction SWIA I can perform this background step and our Workflow will be continued.
How can we decide this problem?

Hi,
Please check settings required for WF-BATCH on the server from below link.
[Re: Use of SWU3 & WF-BATCH;

Xserver problem with workflow

Apps dba,
Before everything was fine, last Friday we had to reboot our db-tier (database on cm running on it) box.
We got this error,
On entering Oracle Applications Manager (OAM) to check on the status of workflow components (Workflow Manager, "Go" button), under Workflow Metrics, both Work Items and Agent Activity displayed the message
"BIB-7000 Cannot access X Server"
We use VNC. And 11i.
Based on the metalink Note:351839.1., it says it might be due to the DISPLAY configuration..
In the jserv.properties, it looks like
wrapper.env=DISPLAY=dbhost:0.0
From the os,
applmgr:OPEBSN(db)> ps -ef | grep vnc
oracle 8618 1 0 Jan12 ? 00:03:13 Xvnc :1 -desktop dbhost.abc.org:1 (oracle) -httpd /usr/share/vnc/classes -auth /home/oracle/.Xauthority -geometry 1024x768 -depth 16 -rfbwait 30000 -rfbauth /home/oracle/.vnc/passwd -rfbport 5901 -pn
root 8893 1 0 Jan12 ? 00:05:10 Xvnc :2 -desktop dbhost.abc.org:2 (root) -httpd /usr/share/vnc/classes -auth /root/.Xauthority -geometry 1024x768 -depth 16 -rfbwait 30000 -rfbauth /root/.vnc/passwd -rfbport 5902 -pn
applmgr 10572 1 0 13:33 pts/3 00:00:00 Xvnc :3 -desktop dbhost.abc.org:3 (applmgr) -httpd /usr/share/vnc/classes -auth /home/applmgr/.Xauthority -geometry 1024x768 -depth 16 -rfbwait 30000 -rfbauth /home/applmgr/.vnc/passwd -rfbport 5903 –pn
Do you have any idea about how I can fix this problem?
Thank you very much!
Lily

The wrapper.env DISPLAY variable is looking for the Xserver on dbhost:0.0 while your VNC server is running on dbhost:1.0 and dbhost:2:0 and dbhost:3.0.
You may want to check what your $APPL_TOP/admin/[ENV].xml file has the display set to. Autoconfig/cloning has been known to reset the display variable to port 0.0.
Whatever the xml file and the jserv.properties are set to (the concurrent manager script also has an entry in it for DISPLAY), you will probably have to change it to a Valid port (ie. 1.0, 2.0 or 3.0). You may also have to execute the following commands 'DISPLAY=dbhost:1.0;export DISPLAY;xhost +'.
There is a metalink note on setting up the XServer for eBusiness but I can't remember the number.

Problems with Auto approval workflow (WS 10000060) for shopping carts

Hi SAP Network community,
I have got a problem with the auto approval workflow for shopping carts.
Basically the workflow approves the shopping cart once it was created.
But then the related Purchase Order remains in Status held. If the PO gets ordered manually then it is not transferred to the R/3 backend system.
For testing purposes also the one step approval workflow was activated. If the shopping cart gets approved by clicking into the detail approval screen (not by approving through the green tick box in the shopping cart overview) then the PO gets ordered and transferred to the backend system as normal.
But if the shopping cart gets approved by using the green tick box in the shopping cart overview then the same problem occurs as described for the auto approval workflow.
The system version is SRM 4.00
Did anybody have the same or similar problems with the auto approval workflow and what could be the reason for this problems.
Thanks in advance,
Robert

Hi
Which SRM Workflow Scenario are you using (IS it Item level workflow or Shopping cart level Workflow) ?
Are you using customized SRM Business workflow or Standard SRM Workflow ?
Please go through these links as well.
http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/eb/289f4099852e54e10000000a1550b0/frameset.htm
Incase you are using Standard SRM Workflow, please raise an Customer OSS message with SAP at the earliest.
Regards
- Atul

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Problems with PO creation in SRM in Plan Driven Scenario

Hi experts,
I have a problem with creation of PO from SC in SRM 5.0 (Extended Classic) in Plan Driven Scenario:
We transfer PM order from FI/LO (ECC 5.0) to SRM (the Extended Classic is activated).
SC (External req) is being approved
After approval there is a status on each SC position: "Item in transfer", after a long time status is being changed to "Error in transmition".
PO is not created and I don't know why. Any ideas?
Regards
RafaD

Hi RafaD,
Check for the shopping cart status message in BBP_PD.
Also check the status in application monitor using RZ20 then you will get a better picture about the problem.
Check the settings in the SPRO > IMG > SRM > SRM Server > Cross Application basic settings > Define objects in Back end systems.
Also check the following SAP notes which will help you in sorting out the problem :
Note 757625 - Incorrect Status I1112->analysis report
Note 1040878 - Cannot transfer shopping carts with status I1112
Note 631513 - Shopping cart in status 'Erroneous transfer' without alert
Note 1003350 - Follow-on doc BE PO not created for SC
Based on the error details you get through BBP_PD & RZ20, you can apply any of the relevant SAP notes mentioned above.
Hope this will solve your problem.
Let me know the outcome.
Rgds,
Teja

Problem with external punchout in SRM Server 713

Hello,
We upgrade from SRM_SERVER 701 SP 04 to SRM_SERVER 713 SP 02, now we have a problem with external catalog, we did not change anything in standard call structure, however now when the user access to external catalog, select a product and "checkout", SRM returns to shopping cart screen without products and no message are register in log in transaction code SLG1.
Our parameters in structure are:
10                     https://xxxxxxxxx                          URL
20 VIEW_ID          NAME                            Fixed value
30 VIEW_PASSWD     XXXXXX               Fixed value
40 USER_ID          SY-UNAME                   SAP field
50 BRANDING      search5                     Fixed value
60 LANGUAGE      ES                           Fixed value
70 COUNTRY      MX                             Fixed value
75 EASYORDER 1                          Fixed value
80 target _top                                  Fixed value
85 ~caller      CTLG                              Fixed value
90 OCI_VERSION     4.0                     Fixed value
91 FILTER                                      Fixed value
92 OPI_VERSION 1.0                     Fixed value
100 HOOK_URL                             return URL
110 returntarget      _top                       Fixed value
we made some test with parameter BYPASS_INB_HANDLER, set as 'X' but this not solve our issue.
We have an implementation in badi BBP_CATALOG_TRANSFER to map product category, even if I set an external breakpoint in this implementation, system does not pass through it, also we test with this implementation inactive and behavior is the same, nothing transfer to shopping cart
Does anyone know what's missing?
Thanks in advance.
Best regards,
José Luis D.

Hello Jason,
Thank you for your answer, but as I told, If I set an external breakpoint it does not stop for debugging, so I can't see table as you recomended. This process (debugging) is familiar to me, in last version I can do it.
Any suggestion?
Thanks in advance, best regards
José Luis D

Need to send HTML email from Workflow : problem with sender

Hi all,
i need to send HTML email from my Workflow. I did it but i have a problem with the sender. The sender of email is always the agent responsible of workitem, and i don't want the receiver can answer to sender. So i need to put a false email address like nosender.at.mycustomer.com.
Possible to do that ?
Thanks for your help.
Cheers

Hi rick
How to change the wf-batch to some other name as you mention in previous reply. Can you give some details of that. If i use the function module SO_NEW_DOCUMENT_ATT_SEND_API1 how to change the wf-batch name and if i use send mail step in my workflow how to change wf-batch name.
Regards
vijay

Problems with "Author once" workflow, can't transcode HDV to BD and DVD

Adobe claims that with Encore CS3 you can
"author once, deliver to three formats" -- Blu-ray, DVD and Flash. I have been doing some research and testing, but have not been able to get it to work.
It seems as though Encore is not capable of taking HDV 1080i60 footage and transcoding it for both Blu-ray and DVD. The Blu-ray looks great, but the downconverted transcode for DVD is completely unusable.
Link to screen shot of HDV to DVD transcode. (Note: this is a frame at 100%, so the "comb teeth" really are that big.)
I have seen some pretty pathetic downconversions from HDV to DV resolution, but this is the most creatively useless one I've come across so far.
I have been able to use Dynamic Link to get an almost acceptable "author once" workflow from HDV footage. Unfortunately, I have not been able to find a way to get Encore or After Effects to render fields for the DVD transcode, so fast-moving graphic elements and text have jerky/strobing motion.
FYI, I got Dynamic Link working well for non-fast clips by doing the following:
Make sure that "Separate Fields" was set to "Upper" in "Interpret Footage" for the HDV clip.
Set the clip's frame blending mode to "Frame Mix" ("Pixel Motion" works, just take longer).
Enable Frame Blending for the comp.
(Enable Motion Blur for the comp if any layers are using Motion Blur).
If only there were a button to enable field rendering for the comp along with Frame Blending and Motion Blur, as both of those options directly affect how the Dynamic Link renders/transcodes in Encore.
I noticed that without Frame Blending enabled for both the clip and the comp, the motion in the transcode was very jerky, even though the clip had not been time stretched/remapped.
Does anyone know of some way to get the mythical "author once" workflow to work? Perhaps it's only for progressive workflows and not interlaced? Could this be a Mac-related problem (I have not been able to test on Windows)?
I know I can downconvert first, then import into Encore, and that does work fine, but that completely negates the wonderful concept of "author once".
Any help or advice is greatly appreciated.
-Joel Granholm
Details:
Encore CS3 3.0.1.008
After Effects CS3 8.0.1.8
Premiere Pro CS3 3.0.1
Final Cut Studio 2
Mac OS X 10.4.10
Mac Pro 8-core, 8 GB RAM / MacBook Pro 17" 2-core, 4 GB RAM
Shooting/editing in HDV 1080i60
Trying to create:
BD: NTSC, 1440x1080, 29.97i (upper field first), H.264.
DVD: NTSC, 16:9 Aspect Ratio, 29.97i (lower field first), MPEG2

Ruud,
Gspot showed there was a problem with the file. What it said was of the 130K frames, most were not needed. I went back to the editor and reconstructed the 130K file. Had problems trying to export to M2v. PPro 2.0 would freeze every time, sometimes in a few minutes, sometimes just short of completing, approx 2 hours(this was a 2 pass vbr setup). I experienced problems just trying to make an AVI file for importing into Encore 2.0. A lot of water has gone under the bridge since I first started this journey(over 300 hours). My first shot at elation occurred when I decided to try an m2v at vbr 1 pass instead of 2 pass. It worked. I say this because of late I have successfully made an Avi file, Imported the timeline and in fact satisfactorily made an m2v file (2 pass). The m2v was also brought into Encore 2.0. Though I have 4 HD's, it seems to me that as I am moving toward a successful product, I'm finding that I've located all my assets on one HD. Is this the way to go? I'd like to thank the alert for using Gspot. And I will, always. I believe that if I had used Gspot earlier I would not have been trying to fix the problem using a bad asset.
I've been able to make an iso file, though having trouble making a playable disc.

Problem with oracle workflow builder 2.6.3.5

Hello
I have installed oracle workflow server 2.6.3 on a oracle 10G 10.2.0.1 in Red Hat linux Enterprise 4L and I have Oracle workflow builder 2.6.3.5 on Microsoft Windows XP Service pack 2
I have the following error when i try to save or open and itemtype from the database
1005: Language is not populated, please refers to Workflow documentation for steps on populating a language.
How can i solve this i've alredy changed the NLS_LANG to match with the server
In the server the language is set to American and in the NLS_LANG i have set like this AMERICAN_AMERICA.US7ASCII
hope you can help me as soon as posible
Andres

Hi Matt thanks for the answer
i've already seen the wf_languages table and i have the following:
CODE NLS_CODESET I
AR AR8ISO8859P6 N
BG CL8ISO8859P5 N
CA WE8ISO8859P1 N
CS EE8ISO8859P2 N
D WE8ISO8859P1 N
DK WE8ISO8859P1 N
E WE8ISO8859P1 N
EG AR8ISO8859P6 N
EL EL8ISO8859P7 N
ESA WE8ISO8859P1 N
F WE8ISO8859P1 N
CODE NLS_CODESET I
FRC WE8ISO8859P1 N
GB WE8ISO8859P1 N
HR EE8ISO8859P2 N
HU EE8ISO8859P2 N
I WE8ISO8859P1 N
IS WE8ISO8859P1 N
IW IW8ISO8859P8 N
JA JA16EUC N
KO KO16KSC5601 N
LT NEE8ISO8859P4 N
N WE8ISO8859P1 N
CODE NLS_CODESET I
NL WE8ISO8859P1 N
PL EE8ISO8859P2 N
PT WE8ISO8859P1 N
PTB WE8ISO8859P1 N
RO EE8ISO8859P2 N
RU CL8ISO8859P5 N
S WE8ISO8859P1 N
SF WE8ISO8859P1 N
SK EE8ISO8859P2 N
SL EE8ISO8859P2 N
TH TH8TISASCII N
CODE NLS_CODESET I
TR WE8ISO8859P9 N
US US7ASCII Y
ZHS ZHS16CGB231280 N
ZHT ZHT16BIG5 N
37 rows selected.
as you can see i have installed the american_america.us7ascii
also the nls_lang key in HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_oracleas1
is set to AMERICAN_AMERICA.US7ASCII
I don't know wich is the problem with this
thank you again

SRM 7.0 problem with workflow

Similar Messages

Maybe you are looking for