SRM 7.0 Process-controlled Workflow not starting

Hi,
I have problems with implementing an own process-controlled workflow. The "Sample BC Set for Process Level Definition" /SAPSRM/C_SC_600_001_SP04 is working fine. However I do not succeed in triggering a customer Process Schema for BUS2121.
The (first?) problem can be duplicated as following:
1. BC-Set /SAPSRM/C_SC_600_001_SP04 is activated
1.1 When creating a shopping card (Web Portal) a approver ("Head of organizational unit" in OrgManagement) is displayed in the Details (Approval-Workitem is created when saving the shopping cart)
--> OK
2. Deactivation of Process Schema 3C_SC_600_001 (replace Eval.IDs with customer Eval.ID which contains always false expression)
--> When creating a shopping card (Web Portal) no approval data is displayed in the Details
--> OK
3. Copy Process Schema 3C_SC_600_001 into ZC_SC_600_001; replace customer Eval.ID with original Eval.IDs (Boole; no process schema in expression (Eval-ID 3EV_SC_600_001_100; Expression 3B_SC_600_001_100: "Execute always"))
--> When creating a shopping card (Web Portal) no approval data is displayed in the Details
--> NOT OK; the same result as with 1.1 is expected
Why is 3. not working? Any ideas would be very welcome.
Best regards

Hi..
what do you see in SLG1? .. i think your process level Eval.id result is false, that is the reason workflow is not kicking of
1- level approval.. check your process level configure and try to use 0ev000 as a Eval.Id instead your custom Eval.Id and test..
Saravanan

Similar Messages

SRM Process Controlled Workflow - Re-start using FM BBP_PD_SC_UPDATE

Hi All,
We are upgrading from SRM4.0 to SRM7.0 SP07 in classic scenario. We switched to Process Controlled Workflow.
We have a CUSTOM application where the requisition items are entered and a Shopping Cart is created in SRM through Function Module BBP_PD_SC_CREATE. When the Shopping Cart is created in SRM , the Process Controlled Worflow is triggered successfully.
In the custom application , we allow users to do changes to the requisition that are awaiting approval.The changes are updated in SRM Shopping Cart through function module BBP_PD_SC_UPDATE. It is noticed that the workflow process levels are not re-started after the shopping cart is updated through FM BBP_PD_SC_UPDATE.
However , the process levels are re-started when the change is directly done to the Shopping Cart in SRM POWL. We want the process levels to be re-started even when the changes are done through BBP_PD_SC_UPDATE. The users are used do changes to the requisition through the custom application. We also noticed that system does not go through BAdI /SAPSRM/BD_WF_PROCESS_RESTART when changes are done to the SC through BBP_PD_SC_UPDATE.
Is there any way that we can trigger process level re-start when SC is changed through FM BBP_PD_SC_UPDATE
Thanks
Sukumar

HI ,
       This is not the correct way of updating the SC. please check the below process...
       first you try to get the SC document in Edit mode and this can be done only SY-UNAME should requester of the SC or( user who are changing the SC should be in the Org structure ). ( This point why i mentioned is you mentioned that your editing through custom application ).
note : use try and endtry and catch the exception when u get the SC document in Edit mode.
DATA: lo_pdo_sc             TYPE REF TO /sapsrm/cl_pdo_bo_sc_adv.
      "Instance SC PDO Layer
      lo_pdo_sc ?= /sapsrm/cl_pdo_factory_sc_adv=>get_instance( iv_header_guid   = p_guid "ps_shopping_cart-guid
                                                                iv_mode          = /sapsrm/if_pdo_constants_gen_c=>gc_mode_edit ).
   now you do what ever changes to the document. I mentioned points below.
        "Get Item Details
      lo_pdo_sc->/sapsrm/if_pdo_bo_sc~get_item_detail
do changes to the items of the SC.
       "Update SC Items
      lo_pdo_sc->/sapsrm/if_pdo_bo_sc~update_items
       "Submit Update
      lo_pdo_sc->/sapsrm/if_pdo_base~submit_update
       "Save SC
      lo_pdo_sc->/sapsrm/if_pdo_base~save
      or order the SC again.
      COMMIT WORK AND WAIT.
regards,
Devi

SRM 7.0 - Process controlled workflow

Hi,
Landscape - SRM 7.0 SP05
Workflow - Porcess controlled
Scenario - Self service procurement
Problem:
1. We have mulitple level approval workflow for the shopping cart. I am using standard workflow task- 40007953 and using /SAPSRM/BD_WF_RESP_RESOLVER badi to determine agents.
2. All the potential approvers (managers) are determined correctly by this badi but the issue is work-item is sent to all the approvers at the same time where as the requirement is to sent the work-item to each approver in series i.e. only when the work-item is approved by the lower level manager, it should go to the higher level manager. Currently, this workflow task sends the work-item to all potential approvers at one go who can start working on parallely which is not desired.
Could anyone please help me to resolve this?
Please note that adding additional process steps in the process-level configuration was the option but we could not opt for that at this point of development as we have gone too far in terms badi development for agent derterminiation
Thanks & regards,
Amit

Amit,
It is not possible to send the work item to people in sequence by configuring only one process level. If you have only one process level, the agent determination will only be applicable to that process level. If you are trying to assign multiple agents to that step, then all will get the work item at the same time.
I recommend doing one thing, Create multiple process levels(= no of approval levels you want). For each process level you keep same event and expressions. But your agent determination badi implementation need to be tweaked. Here is how you can do that
Use Parameters along with agent determnation badi implementation. In other words derive Agents based on the value of parameter using your badi implementation. This parameter can be configured in Process Controlled Workflow Configuration.
Example,
Process step 1 - WF_BADI - Parameter1
Process step 2 - WF_BADI - parameter2
Now write some code in the WF_BADI to pick up particular agent if parameter value is Parameter1 , pick another agent if parameter value is parameter2. Doing this way you wont ve to redesign your BADI implementation as you are able to break up the Agent logic based on parameter values.
Virender Singh

SRM 7.0 Process Controlled Workflow-Level Type in Process level config

Hello Experts,
In SRM 7.0 for Process controlled workflow,for Level Type in Process Level configuration we have 3 different options
1) Approval with Completion
2) Approval
3) Automatic(System User)
Can you plz explain what is the difference between these 3 diffrent potion for Level Type in Process Level configuration.
Your help will be highly appreciated,
Thanks & Regards,
RKS

1. Approval with completion : This allows approvers to make any changes to document while approving. Generally you define this type for buyer in SC approval.
2. Approval : above minus change
3. Automatic (system approval) : If no process level is determined, you need to set up a process level with automatic approval to approve the document by system.

SRM 7.0 Process Controlled Workflow change

Hi
I have a SRM 7 process controlled Shopping cart workflow working ok, Approval based on value levels. The customer wouldlike to change this so that approval is also based on cost center attributes and also want at each approval level to have a reviewer.
Could anyone advise me how to add in a reviewer, as well as an approver for a particular process step, and also confirm that to have the cost center attribute taken account of at each process step, i would have to develop and code a new expression / evaluation ID, rather than use existing one.
Many Thanks
john

Hi John,
Reviews are common for all process level.. itu2019s not process level specify like approvers.. Also we can add reviewers dynamically by a simple BADI implementation and configurations as follows..
BADI Implementation:
BADI : /SAPSRM/BD_WF_RESP_RESOLVER
Enhancement Spot: /SAPSRM/BD_WF_AGENTS
BADI Definition : /SAPSRM/BD_WF_REVIEWER_RULE
Configuration:
We can see Reviewer folder for all process schemas..
For adding approver or pool of approvers for a particular process level, review my answer in the following forum.. Re: SRM 7.0 SP05 - BRF Item level approval does not work
Thanks!!
Bharath

SRM 7.0 Process Controlled Workflow - Shopping Cart customising

Hi
I am trying to use my own task (copied from TS 40007953) in the shopping cart approval workflow. I have made my task a general task and I have added it to task grouo TG 40000003.
I also put my task number in the task id column in the process level customising.
When the shopping cart is ordered, the workflow is started correctly AND my task is used in the workflow log.
The workitem goes to the correct approver (portal UWL) but the task does not behave correctly. The approve/reject buttons are missing and it does not open.
Is there something I have missed?
Appreciate any ideas:)

Hi..
Any reason that you have customized task use to approve / reject the SC?..
Saravanan

Dead Line Monitoring for Shopping cart approval(SRM 7.0 Process controlled)

Hi Friends,
I am using SRM 7.0 Process controlled Workflow. I need to do below.
Dead Line Monitoring details are given below.
If the approval workitem is not addressed in 3 business days by Approver, the approver would get reminder email notification. If approval Workitem is not addressed in 5 business days by the approver, then an email notification is sent to requester,approver and the workflow administrator.
How to obtain this. Please help me.
Thanks,
Balaji.T.

Hi Masa,
Thank you for your input.
You mean, shall we use BADI BBP_ALERTING for deadline monitoring.?
Infact, i have used
SRM Server->Cross-Application Basic Settings=>Event and Event Schema for Alert Management->Define Event Schema
In that i specified
WF_COMPL_LATEST_END->Message(low)->APPROVAL_DEADL_NOTIFIC_NEW : 24 hours.
But it is not triggering for dead line Monitoring(24 hours Later).
If any body faces this same problem, Please let me know.
Thanks,
Balaji.T.

Approver not determined process controlled workflow in SAP SRM 7.0

Hello all,
I have setup process controlled workflow in SAP SRM 7.0 EHP3 for shopping cart approval.
I have 4 approval levels.
I have used item-based Decision for entire document because for some items i want system approval.
In implementation of BADI /SAPSRM/BD_WF_RESP_RESOLVER, in the method /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_AREA_TO_ITEM_MAP, i am skipping the items for which i want system approval.
Also in method /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_APPROVERS_BY_AREA_GUID of BADI implementation class, i am keeping the approver table empty for the step which i want system approval.
For example i have 1 item in shopping cart and for 1st step, based on some accouting criteria, i want system approval for 1st level and the workitem should go directly to 2 approval step when shopping cart is ordered. This is not happening.
But if i have multiple items, and one item should have system approval based on some criteria and the 1st approval level should be system approval and other item should go to the 1st approver. This is happening and showing 'system' approver for item1 and 'appr_xyz' for item 2.
For shopping cart having only 1 item, If i approve the shopping cart in this state only, it doesn't go to any approver and is not usable.
am i missing anything in BADI /SAPSRM/BD_WF_RESP_RESOLVER??
Please let me know.
Regards,
Yayati Ekbote

Hi Adrian,
Yes it is possible to display custom workflows in the Universal Worklist, However, I am not sure what you are trying to do with a routing table. If the workitems are of type decision, you can use UserDecisionHandler (action handler) configured in the XML file to use the Approve/Reject functionality - we are talking about webflow connector here correct? R/3 connector?
Regards,
Beth Maben
EP - Senior Support Consultant II
SAP Active Global Support
Global Support Centre Ireland
**SDN Forum Moderator:
SAP Enterprise Portal: Application Integration
**SDN Universal Worklist Wiki:
http://wiki.sdn.sap.com/wiki/x/ehU

Process controlled Workflow is not starting

Hi,
I have problems with implementing an own process-controlled workflow. The "Sample BC Set for Process Level Definition" /SAPSRM/C_SC_600_001_SP04 is working fine. However I do not succeed in triggering a customer Process Schema for BUS2121.
The (first?) problem can be duplicated as following:
1. BC-Set /SAPSRM/C_SC_600_001_SP04 is activated
1.1 When creating a shopping card (Web Portal) a approver ("Head of organizational unit" in OrgManagement) is displayed in the Details (Approval-Workitem is created when saving the shopping cart)
--> OK
2. Deactivation of Process Schema 3C_SC_600_001 (replace Eval.IDs with customer Eval.ID which contains always false expression)
--> When creating a shopping card (Web Portal) no approval data is displayed in the Details
--> OK
3. Copy Process Schema 3C_SC_600_001 into ZC_SC_600_001; replace customer Eval.ID with original Eval.IDs (Boole; no process schema in expression (Eval-ID 3EV_SC_600_001_100; Expression 3B_SC_600_001_100: "Execute always"))
--> When creating a shopping card (Web Portal) no approval data is displayed in the Details
--> NOT OK; the same result as with 1.1 is expected
Why is 3. not working? Any ideas would be very welcome.
Best regards

In most cases, this means that the 'Start Process' is not configured correctly. Take a look at the following:
1. make sure that the Wf assigned to your start process is active
2. make sure that reference numbers are configured and assigned to your process
3. assign a user to receive error messages when an error occurs
Thanks,
Derrick Banks

SRM 7.0 Process-Controlled (BRF) Workflow -- Error message to Shopping Cart

I am modifying a BRF Expression used to calculate approval levels. During this calculation, I may run into error conditions (e.g. Currency tranlsation not found) that I want to display to the user (in the Shopping Cart).
I have tried raising the following exceptions:
/sapsrm/CX_WF_RULE_ERROR.
/sapsrm/CX_WF_RULE_ABORT.
Raising these exceptions do result in SLG1 log entries being written, but the User is not informed of the error (ie. at top of shopping cart where other messages display).
I can probably jump out of the Webdynrpo to read logs, but thought there MUST be some standard way of passing error conditions from the BRF, back to WF, and then back to the Webdynpro Window.
Anybody raise error messages back to the online user from Process-Controlled Workflow?
Thanks,
- Tim

>
Saravanan Dharmaraj wrote:
> Hi Tim,
>
> I am not sure about your business requirement, but if you want to display custom error message while user create a SC, SAP has provided a standard BADI - BBP_DOC_CHECK_BADI. You can implement this Badi to raise a custom error,warning message. You can build your brf logic in the BADI implementation..
>
>
> Best Regards,
> Saravanan Dharmaraj.
Hi Saravanan,
I am actually modifying the Approval Limit Checks (for multi-currency translations) that you recently coded in Maryland. It can occur that errors occur in determining limits (new Currency translation I just added), or during the lookup of agents (ie user config is inconsistent).
In these cases, I can make the shopping cart Dump, by raising untrapped error messages, or assertions. However, I would like to raise exceptions that get trapped (such as the ones I identified in original post), and then make their way to the shopping cart.
Unless I am missing something, I don't think the WF BADIs, or BRF are gonna communicate errors back to the shopping cart, even though these components are called during cart creation and checks.
I realize that I can recode the Agent Determination BADIs, BRF calls, or even read BRF logs within BBP_DOC_CHECK_BADI. I mentioned this in my original posting as well.
Anyway, any help is appreciated.
Thanks,
- Tim

SRM Process Controlled Workflow

Hi Exports,
I have created a Process schema for SC object type (BUS2121)..
Looks like my process levels are trigged before the shopping cart is actually ordered by the user..
Is this a normal behavior? or I am missing any configuration? or I need to have a additional process level initially to check whether the SC completed?..
Please advice..
Thanks in advance
Bharath

HI,
Yes. That is correct task ID.
FYI. Task ID List for Process-Controlled Workflow
SRM Contract     BUS2000113               No Completion Task
          40007980     SRM_CT_APPR1     SRM Contract Approval
          40008003     SRM_CTR_Acc     Accept Decision / Adjust Document
          40007997     SRM_CTR_Revi     Revise Document
          40107926     SRM_CTR_RW     review document
SRM Shopping Cart     BUS2121
                                           40007952     SRM_SC_COMP1     SRM Shopping Cart Completion
          40007953     SRM_SC_APPR1     SRM Shopping Cart Approval (1)
          40007954     SRM_SC_APPR2     SRM Shopping Cart Approval (2)
          40007994     SRM_SC_Acc     Accept Decision / Adjust Document
          40007936     SRM_SC_Revi     Revise Document
          40007945     SRM_SC_RW     Review Document
SRM RFx     BUS2200     40107917     SRM_BI_COMP1     SRM RFx Completion
          40007982     SRM_BI_APPR1     SRM RFx Approval
          40107922     SRM_RFx_Acc     Accept Decision / Adjust Document
          40007998     SRM_RFQ_Revi     Revise Document
          40107927     SRM_RFQ_RW     Review Document
SRM Purchase Order     BUS2201
                                           40007973     SRM_PO_COMP1     SRM Purchase Order Completion
          40007974     SRM_PO_APPR1     SRM Purchase Order Approval
          40007995     SRM_PO_Acc     Accept Decision / Adjust Document
          40007996     SRM_PO_Revi     Revise Document
          40107924     SRM_PO_RW     Review Document
SRM Supplier Quote     BUS2202               No Completion Task
          40007981     SRM_QT_APPR1     SRM RFx Response/Bid Approval
                    No Adjust task
          40007999     SRM_QTE_Revi     Revise Document
          40107928     SRM_QTE_RW     Review Document
                    No Completion Task
          40008000     SRM_QT_APPR2     SRM Bid Approval
                    No Adjust task
          40107934     srm_bid_revi     Revise Bid
          40107935     srm_bid_rw     Review Bid
SRM Confirmation of Goods/Service     BUS2203               No Completion Task
          40007987     SRM_CF_APPR1     SRM Confirmation Approval
                    No Adjust task
          40008004     SRM_CF_Revi     Revise Document
          40107929     SRM_CF_RW     review confirmation
SRM Incoming Invoice     BUS2205               No Completion Task
          40008005     SRM_IV_APPR1     SRM Invoice Approval
                    No Adjust task
          40008006     SRM_IV_Revi     Revise Document
          40107925     SRM_IV_RW     Review Document
Auto          40007988     SRM_AUTOAPP     Automatic Approval
Auto          40007989     SRM_AUTOREJ     Automatic Rejection
Regards,
Masa

Complexity of using N-step BADI in SRM 7using Process controlled Workflow.

Hi,
Just as a big thought,
I have a Shopping Cart requirement, Here i am asked to develop a Custom workflow for SRM 7.0.
And the client is looking for us to use Process Control Workflows i.e(BRF integrated one).
I need to understand the complexity of using a N-step BADI.
How would be the complexity level if I use a N step BADI( ie Multiple approval levels on Line Item Based).
Kindly tell me the complexity of Using it and if any one has come across some requirement like this, then explain me that how did you face the situation.
Expecting an Earliest Response.
Thanks,
Shanky

Hi,
Is your project SRM 7.0 implementation project then you have to go for Process Controlled Workflow and if your project is upgrade then you can still go with Application Controlled Workflow but down line this has to switch to Process Controlled Workflow.
Best Regards,
Saravanan

Process-controlled workflow hang due to dump

Hi all,
due to a temporary dump in an SRM 7 system, some document-related workflows are stucked... in other terms, these workflow processes have been started, the the dump occoured and by now, they seems to be stucked in "in process" state.
Tecnically, these are not workflow in error, so SWI2_DIAG is not helpful.
We'd like to unlock this situation and -eventually- restart the workflow process. How can we do it?
Thanks in advance for your help and support.
edit: system dump is now solved, which means, triggering the same workflow process will result in a success.
Edited by: Matteo Montalto on Jun 30, 2011 4:34 PM

Ok. There used to be OSS Note 1458380 - Process Controlled Workflow Restart Program, if the document is in "Awaiting Approval" Status.
Or do the manual restart by using tcode SWUE (Event trigger)
Object Category - ABAP Class
Object Type - /SAPSRM/CL_WF_PDO_SC
Event - READY_FOR_WORKFLOW
Object Key - <DOCUMENT_GUID>
Event Parameter - <SC Creator User ID>
and Click "Create Event" button
Use SWI1 to check whether the event is created and see whether the document is submitted for workflow triggering or use SWI6 to check for that SC document

Advantage of Process-Controlled Workflow

Good Morning!
What are the advantage of Process-Controlled Workflow? (and/or what are the advantage of Business-Rule-Framework?)

I am looking at a SRM 5.5 upgrade to SRM 7 and moving to PCW represents issues and risk to me.
The SAP Migration program /sapsrm/pr_wf_migration_cfg does not deal with the N Step Badi Wf's.
SAP's recommendation is to complete all active Wf's are restart with PCW which means finalising all approvals restarting Approvals using PCW from the start,
SAP recommend ALL processes should be moved to PCW from ACW in a production environment.
If your trying to implement a ACW N Step Badi in PCW then you will probably be looking at Resp Resolvers that refer to a Badi implementation where you will need abap code.
Not sure about a flexible set of approval levels, but think that's another Badi implementation, with abap code.
Not over impressed, I'm afraid. Better structured abap program code in the N Step BADI could be an improvement

Process Controlled Workflows VS Applicaiton Enabled Workflows-What to chose

G'Day All,
We are upgrading from SRM5.0 to SRM7.0
There are these bespoke shopping cart approval workflows developed previously. I have to do some sort of assessment to include
1) Why would we go for PCWs instead of just migrating the old ones in SRM 7.0 as business is pretty happy with the functionality they have got and are not interested in revising the workflow processes. Answer : Application enabled workflows are in maintainence mode so newer functionality would be delivered using PCWs.( is there any other justification ? )
2) Would we be able to map the existing workflow process to PCWs, here i need some pointers. I understand the PCWs are based on BRF though i don't know much about BRF( updating myself ). The key question i have is, whatever is there in bespoke workflow templates would i be able to replicate that using this i.e. a different technology. Since my exposure to either PCWs or BRF is not great so as a general rule i am asking, is it possible or are there any sort of technical limitations on what you can and what you can't do using PCWs which you could design using a normal workflow template?
I am sure this would be a common analysis which many of you might have done or are doing if you are involved in an upgrade.
An Interesting Fact : There is no documentation available on existing SRM 5.0 workflows as what differently they have done to standard. The only thing i know at this stage is they have a bespoke level 1 template which call different standard templates for n level approval process. The apporval process( agent determination ) is based purely on custom logic. I am not that worried about the agent determination as i know i could get that as rule evaluation in BRF. The crux for me is to understand how BRFcontrols or connects to workflow templates in this particular case and what permutation conbinations are possible.
So, i want to have a discussion on this and if possible some insight on all this new PCWs.
Hope to see some valuable comments.
Regards
Praveen

Hi everyone:
My question is the following.
We will implement SRM 7.01 with Process Controlled Workflow.
However in the manual is the following note:
Note: Even if you decide to use Process-Controlled Workflow in general,
there are a few workflows still on the old technology:
WS10400022 . Contract Alert Workflow
WS10000192 - Approval Workflow for Internal Users
WS10000209 - Approval workflow for new bidder/supplier
WS10000093/WS10000100 -Procurement Card Approval
Probably We will required some of this.
My question is if we are planning to configure process and application the correct strategy will be:
1.     Start the configuration with the application controlled workflow and then
2.     Follow with the change of the configuration application to process controlled workflow
3.     And configure the workflowu2019s in process.
u2022     Is there any problem when if we change the check application to process? Are there any chance that we loss the configuration?
u2022     Is there any problem in the functionality that both kinds of workflow (application-process) work at the same time?
u2022     If is possible to make change or maintenance of the application workflow?
Thanksu2019 a lot for all the help
Best Regards

SRM 7.0 Process-controlled Workflow not starting

Similar Messages

Maybe you are looking for