SRM 7.0 Standard fields

Hi,
Do any one have any idea of how to handle the attributs of standard fields in SRM 7.0, we are not able to change any thing via enhacement options? so how to handle it? ex: in the Delivery/maintenance tab(Ship to address) i want to make the fields input disabled.. so how can we achieve this??

hi Lokesh,
Please check the below link it may help you, its regarding changing the attribute of a standard button.
You may try it for field also.
Rename the "save" button on SC screens to "Hold Cart "
Regards,
Neelima

Similar Messages

Map a custom SRM field to a standard field in R/3

Hello All,
We have created a custom field in SRM and it needs to be transferred to one of R/3's
standard field. it has to be done in both the classic and extended classic scenario.
For the extended classic scenario I tried using the BADI BBP_ECS_PO_OUT_BADI
but this is not getting called in the creation of local purchase order neither
does it transfer the changes made to r/3
As for classic scenario I tried using the BADI BBP_CREATE_BE_PO_NEW ~ FILL_PO_INTERFACE1
but the structure cs_po1_document-IT_POITEM does not get filled up with the item_guid
which needs to act as a reference field to read the table.
At the backend i tried using the bbp_po_inbound_badi and tried to change the value in the
debuggung mode. But it didn't carry the value to the field either.
Thanks in advance,
Prasanna

1. The BADI BBP_CREATE_BE_PO_NEW will only be called in the classic
scenario wherein the purchase order is directly created in the backend
R/3 system.
For extended classic scenario, kindly use the BADI BBP_ECS_PO_OUT_BADI
instead.
Please be sure that you have filled BBP_CREATE_BE_PO_NEW with these lines:
CS_CTRL_ATT-BE_DOC_TYPE = 'SRM'.
CS_CTRL_ATT-BE_STORAGE_CAT = 'DMS_C1_ST'
Please also check the settings in the customing of the backend (DC10, DC20, DC30).
2. Please create test data in BAPI_PO_CREATE1 in backend system according to note 539978 As in the note described, please
- set the Parameter FBGENDAT 'X' in the backend system for the
    RFC user of the SRM system
- execute the report FBGENDAT in the mode 'A'.
    after activating this report, test data will be created by every
    BAPI_PO_CREATE(1) call.
- once you have a new entry in the SM13 of the backend system,
    please deactivate the generation of test data in report FBGENDAT.
Please check the Data transfered from SRM.
3, There are some field with will be cleared during MM processing when
you run the BAPI_PO_CREATE1 with the data transfered from SRM.
Examples :
Classic scenario.
In this case you create service purchase order.
For service purchase orders fields WEMPF and ABLAD(GR_RCPT and UNLOAD_PT in BAPI) are not filled when creating the document. It is absolutely not possible to have this unloading point/ Recepient on item level service documents. The account assignment is entered on service level and it is then used to determine the account assignment on item level. So even if you were able to pass from SRM the unloading point/Recepient on item level in service documents it would be overwritten from the account assignment of services. This functionality won't be available in standard R/3.
Please see note 118008 for more information.
Extended classic scenario.
As soon as you pass delivery address The system clears field EMLIF (supp_vendor in the BAPI interface). Do not pass delivery address and you will be able to have Vendor in the purchase order. Due to the fact that delivery address exist, a lot of fields in lt_item are cleared, including supp_vendor.
Call stack:
8 SAPL2012 FORM PROCESS_ADDR_TABLE
7 SAPL2012 FORM CREATE_ITEM_ADDR
6 SAPL2012 FORM PROCESS_NON_INTEGRATED_COMP
5 SAPL2012 FUNCTION BAPI_PO_CREATE1
Please see code in subroutine PROCESS_ADDR_TABLE:
                CLEAR imt_item-kunnr.
                imt_itemx-kunnr = bapi_yes.
                CLEAR imt_item-emlif.            !!!!!!!!!!!!!!!!!!!!
                imt_itemx-emlif = bapi_yes.
                CLEAR imt_item-lblkz.
If you have the fields cleared in MM process , it is not a SRM-EBP-POR issue , but a MM-PUR-PO-BAPI The BADI BBP_CREATE_BE_PO_NEW will only be called in the classic scenario wherein the purchase order is directly created in the backend R/3 system. For extended classic scenario, kindly use the BADI BBP_ECS_PO_OUT_BADI instead.
I hope this information will help you .
Summer Wang
Edited by: Summer Wang on Nov 24, 2009 2:50 AM

Copying custom fields from SRM PO to ECC PO standard fields

Hi All,
There are three custom fields which are added in SRM SC and PO at item level. My requirement is to map these three custom fields to three standard fields in ECC PO. Can any one please explain me, how the replication of SRM PO to ECC PO happens? I could find a function module "B470_PO_CREATE". Can any one tell me through which transaction or program this FM will be triggered.
Any useful answer will be rewarded
Thanks,
Deepthi

Hi Kumar,
Sorry for the late reply. I have the solution for this question.
For copying the custom fields code is to be written in the BADI "BBP_ECS_PO_OUT_BADI", method "BBP_B46B_PO_OUTBOUND". This BADI has both ECC PO fields and all the SRM fields(including the custom fields added in PO and SC) in separate structures.IS_HEADER, IT_ITEM etc has all the SRM PO values. CS_BAPI_POHEADER, CT_BAPI_POITEM etc has ECC PO values.
There are two function modules, BBP_PD_PO_TRANSFER_EXEC and BBP_PD_PO_TRANSFER_EXEC_V2. Execute these function modules with the GUID for PO after PO change or create in SRM system. Once the FM is executed the BADI will be triggered and the additional functionality carried out and PO replication from SRM to ECC happens.
Hope this helps you. Please let me know if you need any more information.
Thanks,
Deepthi

Adding Standard field in SC POWL result in SRM 7.0

Hello Experts,
We have Upgraded the system from SRM 4.0 to 7.0. Here, we have a requirement to add a standard field(BE_OBJECT_ID = PO Number) to the SC POWL result list. I know to procedure to do for Custom fields.
Could any one of you help me in this.
Thanks in Advance,
Vishnu Reddy

Hi! To add columns to POWL result, you can accesthe path below in SPRO:
SAP SRM
-> SRM server
-> Cross-Application Basic Settings
-> POWL and Advanced Search
-> Adjust POWL Layout, Search Criteria and Pushbuttons
After this, select the POWL (Feeder Type). For SC, you can use SAPSRM_FEEDER_SC, for example.
Then click on Field Catalog (right menu). Set a value in the Position column for the field you need to add.
I hope this helps.
Best regards,
Christian Zeuch

SC Workflow not updating standard field

Hi,
I am using SRM 5.0 .After approval of SC which have multiple item not updating standard field of source_ind to all the line items .
It's getting updated in only first line item .
Recent Package : SAP_ABA SAPKA70011
Thanks ,
Sachin

Hi,
DO you mean to tell that after the shopping cart is approved , only the first item is send to the sourcing cockpit?
ANd the other items of the shopping cart are not send to the sourcing cockpit?
Can you please compare the category for the two lines? is it the same?
can you check wether the category mentioned for the second line has got category which has been configured for sourcing cockpit?

How to map customer field to standard field using BAPI_PO_CREATE1 ?

Hi,
i am trying to transfer a customer field from SRM to ECC60 through BAPI_PO_CREATE1;
In SRM the EAN field does not exist; Thus we have created it.
While transfering the PO to ECC, we try tu use BBP_PO_INBOUND_BADI to map the SRM field to the EAN11 field in EKPO.
However, we do not find the EAN11 field in the BAPIPOITEM structure.
Steps already done :
BBP_CUFMAP
How do we map a customer field coming from an external system to an ECC standard field ?
Kind regards,
Yann

interface name is: SalesOrderCreateRequestConfirmation_In
have a look at this link to get some more details:
http://help.sap.com/esoa_erp2005/helpdata/en/44/62e384e370311de10000000a155369/frameset.htm
is that what you need?

Adding an asterix(*) in the standard field in the shopping cart screen.

Hi all,
In the Delivery address of the shopping cart screen, I need to add (*) in a field text, saying that it is mandatory field.
So, I need information that can help me change the standard field text, to add(*) in prefix. can you please help me find the information to add the same.
Regards,
Abhinay.

Hi Abhinay,
if you are in SRM 7.0 , then you can do it through the below configuration else you will have to modify the relevant HTML template.
SPRO->IMG->SAP Supplier relationship managemnet->SRM Server->Cross Application basic setings->extension and Field control(personalization)-> configure field control->configure control of field of substructure->Metadata for Fields of Substructures and Table-Like Enhancements
In your case if this is delivery address field , then choose Bus. object set type as 07 , Business object as BUS2121 , set level as Item , set subtype as 00000027.
you have to finnd the field name and select that and make the option as Field Visisble, Fiels enable 'Field required' tick.
As far as i know it will make a red asterick in the screen but you will have to write that check in DOC_CHECK_BADI to throw error message.
Thanks
Iftekhar Alam

SRM 7 SC custom fields to Local PO

Hi ,
we are in Extended Classic Scenario
I have a custom filed in the shopping cart, based on the input in the SC custom filed the same data should be flown into the standard field in the LOCAL SRM PO.
Can anybody suggest me how to achevie the functionality.
Thanks and Regards,
Krishna Chaitanya

Hi,
May be attached below link document will usefull to you.
https://websmp105.sap-ag.de/~sapidb/011000358700001969972008E.pdf
Thanks
VIKAS

Display standard Field Profit Center in Account Assignment Tab

Hello all,
i have a problem regarding display a standard field.
The Business Case is that when i create a new shopping cart, on item level, on tab account assignment i want to display the field profit_ctr.
i thought that i can maintain this in SPRO.
Configure Field Control -> Configure for Fields of Substructures -> Metadata for Fields of Substructures and Table-Like Enhancements
with new entry
31 PROFIT_CTR BUS2121
but i can see this field when i create a new shopping cart.
You have an Idea how to configure this ?
greetz Chris

Hi,
Check SPRO configuration for account assignment settings @
SRM server->cross application basic settings->account assignment->Define account assignment
1. Check for your acc assignment category for ex. WBS , what are account assignment fields are maintained.
if not there maintain profit_ctr from search help.
2. If you are not able to track profit_ctr in search help then you may need to make respective profit center entry in table BBP_C_ACC_F and then perfom step 1.
after above steps even you are not able to get profit center on screen then you may need to check
1. Meta data configuration
2. WDP component for profit_ctr field
Regards
-Vipin

Bapi bbp_create_be_rs_new mapping a customer field to standard field

hey guys , I am trying to create a reservation in ECC and i am trying to map a custom field to a standard field in ecc. In the structure of the reservation in the bapi there field does not exist but it exists in ecc. How do i map one of the values from the item table to a field to ECC when the field does not even exists in the bapi?
The field that i want to map is PRIO_URG in ecc and it does not exists in the bapi bbp_create_be_rs_new. I saw that there is an IT_RS_EXtensionin strucutre but I dont know how to pass a custom field to a standard?
I also want to pas a text id field to ECC too? How should i do that? thank you.

help! I don't understand how to pass my value that i got from a table in SRM to the bapi structure bapiparex?

How to create a custom task in SRM for the standard task

Hi Gurus,
How to create a custom task in SRM for the standard task eg: TS10407929
regards,
George.

from PFTC itself. Same.

Display value in custom field selection of standard field

Hi,
I want to display the country value based on the Account selection, that is the country associated with the selected Account.
I created Contact extension BO and added country field with data type CountryCode. Account is a standard field.
I am able to fetch country value but assigning the value to Country field can be done in only BeforeSave.absl
I have also provided validation for this country field.
Issue here is:
First Validation-OnSave.absl gets called and then BeforeSave.absl.
I want the country value to be displayed once the user selects Account.
Regards,
Vijaya Chavan

Hi Vinod,
I got the issue.
AfterModify.absl gets called when the Contact Quick Create screen gets loaded and not after selecting the Account field value.
So I tried geting the value directly from the following path without firing a query in BeforeSave.absl.
this.CurrentDefaultIsContactPersonFor.BusinessPartnerRelationship.FirstBusinessPartner.AddressInformation.GetFirst().AddressSnapshot.PostalAddress.GetFirst().CountryCode;
But BeforeSave.absl gets called when I click on "Save". I wanted the value to be displayed soon after the Account Value is selected.
Regards,
Vijaya Chavan

Add search help/drop down list to a standard field in MIR7

Hi All,
I have a requirement to add a search help on one of the strandard field in MIR7. This field has no search help in dictionary (SE11). Do you have any idea on how to do this? Is there any exit that i can use to?
Please help!
Thanks in advance.

Hi Akira,
Please check the below threads.
[how to create F4 for the standard transaction]
[F4 HELP for standard field..;
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/daeda0d7-0701-0010-8caa-edc983384237]
[Re: Adding a field in standard search help;
Edited by: Prasath Arivazhagan on Apr 13, 2010 5:38 AM

F4 HELP for standard field..

i want to put F4 help for standard field FERTH in mm01 and mm02 ...
is there any way to put F4 help for this field..

try this
1. First go to SE11 and create your own search help( if you dont know how to create a search help please feel free to ask me, it is very easy).
2. Now in your module pool program program go to the layout of your screen.
3. Now when you see the attributes of this field in the Dict tab you will find the field Search Help. Now here you can specify the name of the search help you created in SE11.
There is also another mehtod to create the dynamic search help. eg:- in a posted document data get the Document nos related to that company code.
The sample code is like this:-
First of all declare the module below in the flow logic of your screen then create it in your main program.
You declare the module in the PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD TXT_DOCNO MODULE VALUE_BELNR.
You also need to create an internal table where you wil store results of the select query fired below in the module.
here you will get a F4 help on the filed Document Number(TXT_DOCNO) based on the field Company code (TXT_CODCO)
MODULE VALUE_BELNR INPUT.
progname = sy-repid.
dynnum = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'TXT_CODCO'.
APPEND field_value TO dynpro_values.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'BKPF'
fieldname = 'BUKRS'
dynpprog = progname
dynpnr = dynnum
dynprofield = 'TXT_CODCO'.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = progname
dynumb = dynnum
translate_to_upper = 'X'
TABLES
dynpfields = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
SELECT BUKRS BELNR
FROM BKPF
INTO CORRESPONDING FIELDS OF TABLE it_doc1
WHERE BUKRS = field_value-fieldvalue.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BELNR'
dynpprog = progname
dynpnr = dynnum
dynprofield = 'TXT_BELNR'
value_org = 'S'
TABLES
value_tab = it_doc1.
ENDMODULE. " VALUE_BELNR INPUT

Adding a new SAP standard field to complaints result BOL

Hi Experts,
There is a requirement to add SAP standard field 'Posting date' to Advance search result BOL of complaints.
This field already exists in search BOL and visible on WEB UI advanced search.
The field is added as attribute in result context node of BT120S_CPL/AdvSearchComplRL through wizard.
But, unable to see the values getting populated. Could you please let us know if any code to be written for getting values populated.
Regards,
Santosh

Hi Santosh ,
My previous post was based on the fact that you have added a model attribute. Since you have added the field as a value attribute and you want to use it for querying , then you would have to do the following
a) Extract the value from the value node.
b) Add the selection param so that 'posting date' is passed to the GENIL. You can use add selection param method in the Advanced query. Use the name of the field in the BOL & the value as yours.
c) Get the result & show it on the way you want.
This is same as it would have been when you had a model field. In that case also you would have extracted the value from model node. I see no difference here except that fetching the field. Rest of the steps remain the same if the field is available in BOL for advanced query.
Yes the difference lies in showing it in the WebUI as now you would have to fill this value node manually. If you had a model node , the framework would have done this for you.
But don't base your choice of model/value node on the ease of coding but on the business case.
Regards
Kavindra

SRM 7.0 Standard fields

Similar Messages

Maybe you are looking for