SRM 7. 0 with ECC 6.0 Enhancement Pack

1) My client just upgraded their R/3 to ECC 6.0, but no Enhancement Pack.
2) They are trying to upgrade from SRM 5.0 to SRM 7.0 in the near futures.
3) During their first SRM phase, their scenario is limited to the following:
a. R/3 RFQs are pushed to SRM via RFC call (custom program)
b. SRM vendor logs in to see the RFQs and creates Quote
c. SRM buyer evaluates the quotes
4) Question: In order to run the above mentioned scenario without issues, is Enhancement Pack 4 a mandatory component for them, or can ECC 6.0 without any EnH support it already? If it's mandatory, which sub-components of the EnH 4 must be activated in order to support the scenario?
5) Question: In their next SRM phase, they are trying to run scenarios like PPS and Doc Builder. In that case, is Enhancement Pack 4 a mandatory component?
6) Last: Is there any SAP official documentation that maybe answers the question that I listed above?
Thanks.

Hello Jay,
Please find the upgrade information:
https://websmp206.sap-ag.de/upgrade-srm
EhP4 is not mandatory for strategic sourcing, data transfer via RFC can be used.
The benefit with EhP4 for your scenario will be new feature of "Collective Processing of purchase requistion" CPPR; where buyer can select the PReq line items on the portal & create RFx directly in the SRM system. All data transfer is via PI in this scenario. Creating a RFQ in ECC is not a good idea, when you can leverage the RFx capabilities of SRM.
New features: Blog:
/people/michael.jud/blog/2008/09/10/srm-70-in-the-business-suite
Official information :
http://service.sap.com/srm click on SRM 7.0 external view
Hope this solves.
Thanks
Ashutosh

Similar Messages

SAP SRM 7.0 with ECC EHP 4 components to execute scenario

Hi All,
I am new to SAP SRM 7.0.Could you please let me know that what are all the components needs to be in place to execute the technical scenarios and business scenarios.I had an hands on experience on SAP SRM 5.0 with ECC 6.0 backend.
Some where i read that there are lot of configuration changes when we integrate SRM 7 with ECC EHP 4.Do we need to have PI 7 for executing Centralized contract and plan driven procurement scenario?Please guide me to have some exposure towards higher version.Thank you in advance.
Best Regards,
praveen

Hello,
You can refer the INSTALLATION AND UPGRADE INFORMATION , Master guides etc maintained at the below mentioned location which will answer all your query's here.
Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.0 .
Best Regards,
Rahul

Central contract in SRM 7.0 with ECC 6.0

Hi
We are using SRM 7.0 with ECC 6.0
When we create contract in SRM 7.0 & Trying to distribute to Backend as Contract, It is showing error in BBP_PD as below
HEADER I1015 Awaiting Approval
HEADER I1021 Created
HEADER I1038 Complete
HEADER I1141 Released
HEADER I1180 Document Completed
HEADER I1193 In Distribution
HEADER I1195 Distribution Incorrect
0000000001 I1143 Item is Active
Badi BBP_DETERMINE_LOGSY is activated to define backend system
No IDOC is also generated.
No errors in MOnitor also
Not sure what is message type needs to define & what else is needed
Regards,
NNK

HI
Need to do following
1. Keep conidtion types in ECC & SRM same for contract.
2. Also Add message types BLAORD & COND_A manually in ECC in WE20.
Then only it works
Regards,
NNK

SRM 7 ehp1 with ECC 6 ehp5?

Gurus,
Is it mandatory to use SRM 7 ehp1 with ECC 6 ehp5? Our client has ECC 6 ehp 4 and is now upgrading from SRM 4 to SRM 7 ehp1. Can you share some links where I can confirm if SRM 7 ehp1 with ECC 6 ehp5 is mandatory?
Also pl let me know what is the difference between shopping cart creation in SRM 4.0 and SRM 7.0 ehp1. SAP says they have changed something and made it more user friendly. Is it different from normal SRM 7 (without the ehp component?)
Regards,
John

Hi,
There are 3 ways of sending PO from SRM to ECC
1.Via - RFC ( by setting the system landscape to a lesser version ) it will not have any side effects just that it used RFC connections instead of ESOA
2.Via PI - by setting the landscape to the current version and configure the relevant XML services in the SOAMANGER
3. via Non PI Web Services- by setting the landscape to current version . This time the webservices are configured in SRM system itself.
I have configured transfer of Contracts from SRM 7.01 to ECC 6.5 EHP5 as Contract/ Scheduling Agreement to the backend with Non PI Web Services(via XML). This way we didnt have to install PI at the client place which saved them a lot.
I have written a blog on how to transfer central contracts from srm to ecc using web services but without PI , please find the link below and hope it is helpful.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/06/13/transfer-of-central-contract-from-srm-to-ecc-using-web-services-without-pi
Regards,
Naveen

SRM 7.01 with ECC 6.0 EHP 7.0

Hi Guys,
Does anyone have an idea on SRM 7.01 compatibility with ECC 6.0 EHP 7.0. Any things needs to be taken care from SRM side after an upgrade to EHP 7 in ECC side.
Please share your experience.
Thanks for your reply in advance.

Hi Imran,
It is compatible, But still for confirmation please see the product availability matrix.
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/support/pam/pam.html?smpsrv=https%3A%2F%2Fwebsmp203.sap-ag.de#pvnr=01200615320900003495&ts=4&pt=t%7Co
Best regards,
Rohit

ECC 6.0 Enhancement Pack 5 upgrade phase ADJUSTCHK faillure

When I run the Enhancement Pack Installation, I get a hard failure at the MAIN_SHDCRE/ADJUSTCHK phase. The error message says "No lines found in logfile matching "UMODPRO\.INX". The log follows...
1 ETQ201 Entering upgrade-phase "ADJUSTCHK" ("20111006131443")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
1 ETQ200 Executing actual phase 'MAIN_SHDCRE/ADJUSTCHK'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'SAP_MOD_EHP'
2 ETQ399 Arg[1] = 'ADJUSTCK.ELG'
2 ETQ399 Arg[2] = 'ADJUSTMT.INF'
4 ETQ010 Date & Time: 20111006131443
4 ETQ265 Starting report "RSUMOD01" with variant "SAP_MOD_EHP" in batch
4 ETQ359 RFC Login to: System="INX", Nr="00", GwHost="fainx", GwService="sapgw00
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
4 ETQ234 Call of function module "SUBST_START_REPORT_IN_BATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ311 Batch job "RSUMOD01" with job count "13144400" scheduled
4 ETQ359 RFC Login to: System="INX", Nr="00", GwHost="fainx", GwService="sapgw00
4 ETQ232 RFC Login succeeded
4 ETQ010 Date & Time: 20111006131819
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
1EETQ248 Missing log file(s) of report "RSUMOD01", matching "UMODPROT\.INX"
What does this mean?
Is the backslash supposed to be in the name UMODPROT.INX?

Hi,
Please check in SM37 if there is any job failure in the system. And also check if there is any dump.
Thanks
Sunny

Ecc 6.0 enhancement pack 5 - incompletion procedure VL10

We loaded ecc60 a few years ago. We just loaded enhancement pack 5 onto sandbox. I am having issues with delivery processing. While creating a delivery either from VL10H or VL01N I have to step through the incompletion log step by step to have the delivery save in the system. If I do not look at every incompletion, the save does give me a doc number but when I go back into it it is not there. None of these incompletion steps currently show up in delivery processing if they are not filled in. (picking time,, loading time, volume, etc). They are not warnings in our PRD system currently. Has anyone seen this and anyone have suggestions on how to resolve with this enhancement pack? I see no notes here or on OSS for this.
Thanks for any help.
Susan

Hi,
We just did a EHP 5 upgrade and after that we found lot of issues in the DN creation area! one was, when you create a DN revesal via VL09 transaction, the document flow is not updated. As well as you get a error in the VL09.
If the credit mamangement is active, your schedule lines are getting doubled in the DN picking screen. Therefore I would suggest you to check for OSS notes.
Best regards,
Rahal

SRM 7.0 EHP1 integartion with ECC

HI,
We are currently using EHP4 of ECC and upgraded our SRM system from 5.0 to EHP1.
What is the min version reqt for integration SRM 7.0 EHP1 with ECC??
I read somehere that SRM 7.0 EHP1 cannot be integarted with ECC lower than EHP5?can someone confirm?

Hi Ricardo,
Thanks for the response!
It is recommended to have SRM 7.01 with ECC EHP4 (at least) to get the maximum advantage of integration part of SRM and ECC system. With these combination, you can create central contract via ESOA services and distribute the contract to R/3 backend system.
-->By SRM 7.0 .1 do you mean SRM 7.0 EHP1?
Can you also confirm if all features of ECC EHP4 are part of EHP5?(EHP4 is subset of EHP5)
We are currently on SRM 7.0 and are planning to upgrade to EHP1.However on the ECC side,we have all business functions needed in both EHP4 and EHP5.Considering this,would it be advisable to anyways upgrade SRM to EHP1?
Also by upgrading to EHP1,my undesratanding is that we only activate the scenario specific switches in the system..is that true?
Please advise.

GTS 8.0 with ECC Enhancment Pack 4 SP2

Hello-
We've recently upgraded our ECC system to Enhancement Pack 4, SP2. We'd like to install GTS 8.0, however I'm unable to find the requirements for GTS 8.0 in enhancement pack terms. I'm only able to find that it requires SPS16, which I'm not able to find any comparisions relating SPS16 to Ehp4 SP2 to see how they stack up.
Basically, can anybody find or refer me to material for GTS requirements in terms after Enhancement Pack 4? Or a note that compares SPS to EhP versions?
Thanks in advance!!
Jeff

Hi Jeff,
SAP note 1266777 provides the information on installation of GTS on ECC with Enhancement Pack.
Best regards,
Howard

SRM Sync with ECC

HI Everyone,
We are using Classic Approach and the SRM is integrated with ECC. Now we have a problem after doing client copy. We have done client copy only for Quality from PRD in ECC and not for SRM PRD to quality. So there is no proper sync between the SRM Quality and ECC quality. Hence the integration is not proper and the documents are not generated in the ECC quality.
Please guide me the procedure of how to sync the ECC with SRM qualtiy.
Thanks.
Siva

When system is copied from other systems all Logical systems and RFCs will be pointing to the old system. You need to run T-code BDLS for changing the Logical systems to the current systems. Then delete all master data like Material groups, Materials master, Vendors and then re replicate. This should solve your issue.
Thanks,
Jagadish

Passing custom field in contract in SRM to contract in ECC

Hi,
We are using SRM 7.0 with ECC 6 (no EHP). We're planning to use central contract distributed with IDOCs. Our contract in ECC has custom field added in the header. We have tried and successfully pass the contract from SRM to ECC (using IDOC BLAORD03 and COND_A).
I know we can create custom field in contract in SRM, but how to pass the value in the custom field in SRM contract to custom field in ECC contract? Do we need to edit IDOC BLAORD03? Is it possible?
Best regards,
Yosea

Hi,
Does anyone know the answer?
John

How is the integration with ECC in SRM 7.0??

Hi,
Working with SRM 5.0 or 5.5 the use of XI for integration with ECC is not mandatory because when we send any document from ECC to SRM like requisitions (to convert them in shopping cards) or when we send any document from SRM to ECC like shopping cards, PO´s, contracts, we only use the RFC´s and the abap programs.
Is the same behavior with SRM 7.0?????
Could the integration from SRM 7 with ECC 6 work with RFC´S without XI or for this vertions is XI mandatory?????
Thanks

SRM70 is closely integrated with XI for transferring docs between ECC and SRM. SAP introduces eSOA tech nology with SRM70 and hence all documents like PR from ECC to SRM, Central Contract from SRM to ECC, PO creation (Classic), etc uses this techn ology.
Thanks,
Jagadish

SRM 5.0 as an Add on with ECC 6.0

Even i have the same question on how we would manage the distibution model when the SRM System is installed as an add on with ECC. Since being on the same client here are some of the Questions. I have also opened a new thread on this.
1.) How would the distribution model be distributed when on the same client?
2.) How would the Documents flow between two different systems?
3.) In an SUS-MM scenario, how would this be handled when installed on the same client?
4.) How would material and vendor replication facilitated?
Any thoughts would be highly appreciated !!
Thanks,
Sundeep

Hi Sundeep,
I have answered for vendor replication here :
One Client Solution
For product category, material and material type replication, this is same process through activation of relevant objects in table mdsv_ctrl_opt_a
Then you have to trigger the replication through mds_load_cockpit
For SUS, you have to select SUS_ONE (instead of EBP_ONE) in table bbp_backend_dest
That all what i know so far
Kind regards,
Yann

Clariffications in MM SUS Scenario with ECC 6.0 backend and SRM 5.0

Dear Team,
We are implementing MM SUS Scenario with ECC 6.0 backend and SRM 5.0
We need to following clarifications
1 Once we create ASN in SUS, how to cancel the ASN. We are not able to see cancel button for ASNs
2 When we create GRN in ECC against the inbound delivery and perform Return Delivery, this Return Delivery is getting updated in SUS. But the ASN status is not changing to canceled. We are not able to perform new ASN for this. Also invoice is being allowed for these ASNs. How to control the same.
Request your inputs please
Regards,
Ravi

HI can you tell me how you get it solve?
thanks in advance.

Did SRM 4.0 can work together with ECC 6?

Hi:
   We are in a process of upgrade, we are plannig to move from R3 4.7c to ECC 6, and also we have a SRM 4.0.
   Do you know if it is possible to SRM 4.0 to work with ECC 6?? We want to know if we can stay our current version of SRM, and just upgrade R3 to ECC.
   Does anyone have this scenario implemented in your business?
   I'll appreciate your answers.
   Best regards, Abraham
Edited by: Abraham Delgado on Nov 24, 2009 10:37 PM

HI Matthew wee are facing a similar situation with our sap landscape with upgrading an EEC5 to an ECC6 system, and we are also looking to upgrade SRM 4-7
how successful were you with your project and what issues have you come across ?
any information would be greatly appreciated.
Cheers
James
Edited by: James Ibbotson on Oct 13, 2010 3:21 PM

SRM 7. 0 with ECC 6.0 Enhancement Pack

Similar Messages

Maybe you are looking for