SRM 7.13 Web-Dynpro custom configuration is not getting delegated

Hello Experts
please help to solve my issue:
SRM 7.13 I created a new configuration of a Wed-dynpro view to replace the original one.
But for some unknown reason it is not getting delegated on the SRM web. Technical Help shows the original WDCONFIGURATIONID.
My WD configuration properties show that the new config should be delegated to replace the one which is still visible on SRM web.
I even tried to add my WD configuration to the table WDY_CONF_DELC, but no luck.
I have no info yet on this from my client, so I am triyng to get some hint even this way.
Thanks
Imi

I am on SRM 7.13 and I also have problems to make my new WD configurations visible on SRM web.
Component: /SAPSRM/WDC_DODC_ORG_ATTR
View: V_DODC_ATTR_PLANT
It is actually the table for Plants in Personalization --> SRM User Settings (Personal Settings) - Attributes (Plant)
I configured the part above.
How to make my WD config work?
I tried to add the config info into table WDY_CONF_DELC, but it makes dumps in User Settings.

Similar Messages

  • Updating extended fields in SRM Business Partner Web Dynpro UI does not work

    Hey community,
    I'd like to extend the SAP SRM Business Partner Web Dynpro (SRM 7.13). I did it like in SAP Note 1386310 described. Everything works fine, the fields show the correct data. But updating these fields does not have any effect.
    I only want to extend the existent fields NAME_ORG3 and NAME_ORG4. I did the following steps:
    - Because of the fact that the fields are existent and not custom, I skipped the extension of structures INCL_EEW_BUT000 and INCL_EEW_BUT000_X (ok, in utter despair I even tried this, but of course I got the message "fields already exist...")
    - I added the 2 fields to the SRM business partner data transfer structure INCL_EEW_BP_CSF_COMPANY_DATA.
    - In Web Dynpro /SAPSRM/WDC_MODC_NAME, view V_PS_OIF_NAME I added the fields NAME_ORG3 and NAME_ORG4 to the context node COMPANY_DATA
    - I added corresponding Input fields and labels to the WD layout.
    - in view /sapsrm/v_mdfsbc I customized the new fields
    -> the new fields are visible in the WD, and, oh wow, they even show the correct data!
    -> Unfortunately, updating the fields does not work, but000 does not get any data.
    Debugging the function "bupa_central_extincl_change" brings up, that function BUP_MEMORY_BUT000_GET gets a but000 structure with filled NAME_ORG1 and NAME_ORG2, but NAME_ORG3 and NAME_ORG4 are empty.
    I also regarded SAP Note 1453747, but the code was already right.
    Any Ideas? Many thanks in advance!
    Steffi

    Hi  Stefanie Krause,
    I am also facing the same problem
    I added the one fields "APPROVAL_EMAIL” to the SRM business partner, data transfer structure '/SAPSRM/S_CLL_BP_COMPANY_DATA ' . I have appended the structure.
    I added corresponding Input fields and labels to the WD layout.
    -> the new fields are visible in the WD,
    -> i am able to visible the input field in WD,
    But if add some value press on next tab and back to the screen the value will be refreshed .
    Kindly help me
    Thanks and Regards,
    Maruthi.M

  • FD33 - Receivable Field in Customer master is not getting updated

    FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
    In SD, we are having the item category but i am not getting how to control for FI documents? How can i make them credit relevant item. Also for special item, we are controlling the same through Transaction code : OBXY - by special GL indicators but what about the normal/general item?
    How can I control the general FI documents having various FI documents type as relevant to credit check?

    Apart from the above,please also check the below:
    FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
    As per me there is no specific control to active the credit active field in FI values unlike for updating the sales values in FD32 we activate credit active for the item cat(VOV7) which will ensure the sales values to update (open order, open delivery and open invoices) in to credit management.
    For FI values to update i think this is inbuilt in the program only.( example update group 000012,15,18 etc).
    Any way coming into query not updating the receivables, please check the below points once again.
    1. Check the whether invoice has accounting document generated or not, make sure that it is generated then only system update the receivables.
    2. Even if the above all points are checked including above all posts,then also still the same issue repeating  then try to run the program RVKRED77, before this first run RVKRED88 and compare this values with FD32.
    thanks,
    Srinu.

  • Custom Duty is not getting inventorised

    Hi All
    I am doing MIGO for import PO.
    Custom Duty is not getting debited in stock account but it is posting into a separate line of Account key FR3.
    FR3 is maintained in pricing procedure for this condition tye JCDB for both Account key and accrual.
    Credit is going to the current account custom clearing account , but debit is nit going to stock account.
    Can anybody help please.
    Further how do I know that JCDB is non cenvatable.
    Regards
    Mukta

    Hi Mukta,
    >price difference account will remain same at the month/year end , and that cannot be inventorized later on as well, right?
    >>> Right
    >So how we will treat this account balance, income or loss kind off on the product?
    >>> This PRD GL values will hit P&L account & not the Balance sheet of company, At the end of the year depending upon the values coming in Credit side or Debit side, Profit or Loss is determined, I think some FI guy may explain you about this in much clear way w.r.t. Accounting.
    In case if you are having COPA, your material will be updated with standard price only,
    here also same logic is applied, normally standard price of any finished product is determined by running the product costing considering all the factors, if at all there is variance they will all go to Production variance & again it will be determined as profit or loss at the end of the year,
    for getting the right standard price for finished product you need to run the costing at regular intervals & update the material standard price accordingly w.r.t.COPA.

  • I purchase Adobe Creative Suite 5.5 Web Premium and I did not get Illustrator in my package. Can you check on that issue please!

    I purchase Adobe Creative Suite 5.5 Web Premium and I did not get Illustrator in my package. Can you check on that issue please!

    Web Premium does not contain AI.
    Mylenium

  • Srm 7.0 - Hide field in web dynpro using configurations

    Hello to all,
    I'm trying to hide some fields on PO web dynpro. In this example on web dynpro /SAPSRM/WDC_DODC_PO_I_BD I start the component configuration /SAPSRM/WDCC_DODC_PO_I_BD, I search for the fields I want to hide and put the visibility attribute to Invisible and I mark final check box.
    The fields don't dessapear from the web dynpro. Am I missing something?
    Best regards,
    Nacho

    Thanks for your reply.
    I have here two situations:
    SPRO. If I add the field on Configure Field Control at Header Level/Item Level it disapears but not all fields appear on this transaction. For example, I can't do that to tolerance group (TOL_GP)
    Webdynpro. Using Component Configuration of the dynpro. I guess that it is in two actions:
       - Change the value of visibility to Invisible on Web dynpro Built-In
       - Add field to context. I put for this example:
             Attributes of the Element usagesDefinition (ITEM_TOL.TOL_GP)
                     usageName ITEM_TOL.TOL_GP
                     componentName ITEM_TOL.TOL_GP
                     ConfigurationName /SAPSRM/WDCC_DODC_PO_I_BD
    The webdynpro way doesn't work, Am I missing something?
    Best regards,
    Nacho

  • SRM 7.0 Web Dynpro ABAP Customization

    Hi ,
    Upgrading from SRM 5.0 to SRM 7.0 and would require customization at the Web Dynpro ABAP Component for RFx.
    I need to put a pop-up screen when the Buyer clicks on the "AWARD" button on the Bid Screen. Now I am not able to find the award action/event at the Web Dynpro component level where I have to put the pop-up code and other related logic. I also tried getting into the SPRO and find the class which may contain the AWARD event. Please let me know the solution to this problem. Thank you.
    Manoj

    Hi Akash,
    Thanks for the reply. Can you please guide me through how to go about the enhancement, keeping the original functionality of the Award Button intact. And I understand coding in method of interface is not possible.
    Manoj
    Edited by: MANOJ NACHIMUTHU on Jul 12, 2011 6:33 PM
    Edited by: MANOJ NACHIMUTHU on Jul 12, 2011 6:35 PM

  • ABAP Web Dynpro: Application Configuration vs Admin Personalization problem

    Hi,
    I created an application configuration for the application MT_ORDER_APP with a component configuration on RPLM_MT_ORDER_COMP.  I changed several Labels and UI Element visibility... and saved.
    When I test this application config for viewing an order of type ZX99, I don't see my changes.  If I right-click on the page, I see that the configuration Id used is MT_ORDER_ZX99.
    Why my Z config is overrided by this one???
    By testing in Admin mode, I discovered that I can personalize this MT_ORDER_ZX99 Config.... But then, the changes are visible to all users viewing ZX99 type orders.
    How to manage to make my Application Config highest in priority?

    Hi,
    how did  you  open in administrative mode?
    to open in adminstrative mode do as follows:
    In se80 ,i.e in the menu bar:
    Web Dynpro Application->Test->Test in Administation mode.
    i hope u can see the option "Settings for surrent config" .
    you can refer the thread.
    [Re: ABAP Web Dynpro Application changes in Administation mode]
    Priya.

  • Web Dynpro render configuration for Adobe Interactive Forms

    Hi,
    Is there any possibility to check rendering configuration for Web Dynpro application? I built web dynpro application which shows simple Adobe Interactive Form. In Sap Adobe LiveCycle Designer all buttons of Interactive Form are working (JavaScript) but in the form showed by web dynpro application in IE buttons have no action. Do You know what is the cause or where to search?

    Hi Pawel,
    The interface of the UI element InteractiveForm contains the method SET_LEGACY_EDITING_MODE, which in turn contains a Boolean parameter. The form is then ready for input
    method WDDOMODIFYVIEW.
    data: LR_INTERACTIVE_FORM type ref to CL_WD_INTERACTIVE_FORM,
    LR_METHOD_HANDLER type ref to IF_WD_IACTIVE_FORM_METHOD_HNDL.
    check first_time = abap_true.
    LR_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT(u2018INTERACTIVE_FORM_1u2019).
    LR_METHOD_HANDLER ?= LR_INTERACTIVE_FORM->_METHOD_HANDLER.
    LR_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( abap_true ).
    endmethod.
    Regards,
    Runal

  • Call another Web Dynpro with Configuration

    HI to all
    I have a Web Dynpro Components, and i have made Application configuration.
    So I want call this Web Dynpro Application from an other Web Dynpro Application with the configuration I have made before.
    Is this possible if so what have I to that this works, has some one a code example for me.
    Thanks & Regrets
    Hermann

    Hi Hermann,
    When you run an application with a special configuration, you may notice the additional URL-parameter
    &sap-wd-configId=my_configid
    . Just add this as a parameter to the application URL, and it will work.
    Ciao, Regina

  • Web Dynpro ABAP, Interctive Form not opening

    I have a simple Web Dynpro with a context node with two attributes (char10).
    There's a view with an Interactive Form UI element and an input field with the corresponding label.
    I've created a form through the Interactive Form UI element property templateSource exporting the context of the view to the form.
    In the form I have a texfield bound to one of the context's attributes and a Web Dynpro Active X Submit Button.
    The form displays fine without the enabled property of the Interactive Form UI element.
    The problem is that I want this form to be interactive, so I have to set the enabled property to TRUE. When I do that the following error displays in the Internet Explorer:
    Error when processing your request
    Note
    The following error text was processed in the system AID : An exception occurred that was not caught.
    The error occurred on the application server sapaida_AID_41 and in the work process 4 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: RAISE of program CX_WD_GENERAL=================CP
    Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LSTANDARD===============CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LSTANDARD===============CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LSTANDARD===============CP
    Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LSTANDARD===============CP
    Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
    Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system AID in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapaida_AID_41 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 4 in transaction ST11 on the application server sapaida_AID_41 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 200 -u: ABAPD4JV -l: E -s: AID -i: sapaida_AID_41 -w: 4 -d: 20061123 -t: 173247 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    I'm running on Netweaver 2004s SP8. I've already installed ACF and properly configured ADS.
    Can anyone tell me what's happening?
    Thanks in advance!
    Santiago

    Hello
    Current problem should be caused by ReaderRights credential.   
    Please install / configure ReaderRights credential. For documentation,  
    refer to ADS configuration guide.                                       
    http://service.sap.com/adobe                                            
       -> Media library -> documentation -> you can find ADS configuration  
    guide.                                                                  
    In this guide, please refer to chapter 'Installing and configuring      
    credentials'.                                                                               
    Dezso

  • Web dynpro Flash Island will not load in portal

    Hi everyone,
    Does anyone know what could be the cause why our FlashIsland wont load into the portal.
    We do get the blue Flash-background and if we right-click on it,
    the right-clickMenu has an item "Movie not loaded".
    The server supports FlashIsland because we are using Netweaver 7 EH 1.
    Also we haven't got any problem to run normal web dynpro's with FlashIsland.
    Is there something you need to configure to use FlashIslands in the Portal.
    edit:
    I also added a new workset and some pages with iviews..
    If i include my Islands here it works.. Only if i alter a webdynpro app that is already added to the portal
    the .swf won't load...
    Does anyone has an idea?
    Kim S.
    Edited by: Kim Schoukens on Oct 26, 2010 5:29 PM

    I'd be checking how those original iViews were defined - quite possibly they aren't built in the same way. The island needs to load some libraries and will be relying on a relative path to find these libs - if the path to the app is not defined in a "normal" way then this link may not resolve correctly.
    Worst case - rebuild your iViews if that is working for you.
    Chris

  • Navigating from one Web Dynpro app to another not belonging to same project

    Hi All,
    I wanted to know is it possible to navigate from one Web Dynpro app to another which does not belong to the same project. if yes how.
    Regards
    Sid

    Hi Siddarth,
    If you want provide the interaction between two Web Dynpro applications then you must develop those projects as Development Components as DCs provides the reusability of the components created.
    You can  through these link to find out more information:
    Where to start DC creation  ?
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd0e0401-0801-0010-aaab-d0e1742da383">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd0e0401-0801-0010-aaab-d0e1742da383</a>
    Server Side Eventing:
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/19e6e990-0201-0010-eca6-a62e342eaad3">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/19e6e990-0201-0010-eca6-a62e342eaad3</a>
    Regards,
    Jhansi

  • Web Dynpro - How to set and get info from Component Controller

    Hi Gurus!!!
    Im having some problems getting and setting info in component controller of my Web Dynpro.
    I can't see the difference between View Context and Global Context.
    How can i create a Global Context Between two views?
    Thanks!
    Regards.
    Polakinho.-

    hii
    difference between view context and global context is we can use the same component controller for all the views in the same application.but when when we create node in view context then it will be available for that view only not for any other view...so if we want to use the same node for all the views we need to create that view in the component controller.so it will become global for that application.
    for using global node you need to map that context in view controller.for that you need to go to that view then click on context tab and drag and drop node from component controller.so it will be available for that view.i hope it helps you.
    regards
    twinkal

  • Java Dynpro - Consumed Java WebService - Not getting executed

    I have consumed a Java Web Service ( EJB ) in my Java Web dynpro code ( using Import Web service Model ( Not adaptive ))
    Successfully consumed.
    But the Web Service Model is not getting executed by this code -
    Request_CreatePortalUsrWebServiceViDocument_createUsr createPrtUsr = new Request_CreatePortalUsrWebServiceViDocument_createUsr();
         wdContext.nodeREQUEST_CREATEPORTALUSRWEBSERVICEVIDOCUMENT_CREATEUSR().bind( createPrtUsr );
    try {
         wdContext.currentREQUEST_CREATEPORTALUSRWEBSERVICEVIDOCUMENT_CREATEUSRElement().modelObject().execute();
              wdContext.nodeResponse().invalidate();
         } catch (Exception e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
    This Web Service resides on the local portal server.
    Thanks,

    Hi,
    First, have you tested that the web service works if you run it directly in the WS Navigator?
    Here is a snippet of how I usually call web services:
    public void getUserControlTable( )
        //@@begin getUserControlTable()
              //     Clear down existing context
              wdContext.nodeGetUserControlTable().invalidate();
              // Create model object
              DBMaint_ConfigServicesFactoryWS model = new DBMaint_ConfigServicesFactoryWS();
              // Create context elements
              Request_GetUserControlTable request = new Request_GetUserControlTable(model);
              GetUserControlTable method = new GetUserControlTable(model);
              request.setGetUserControlTable(method);
              // Bind to context
              wdContext.nodeGetUserControlTable().bind(request);
              // Call service
              try {
                   wdContext.nodeGetUserControlTable().currentGetUserControlTableElement().modelObject().execute();
              } catch (Exception ex) {
                   wdThis.wdFireEventDisplayDebugMessage(
                        "Error calling CanUserConfigureApp service - " + ex.getCause().toString());
                   wdThis.wdFireEventDisplayErrorMessage(
                        "Unable to read User Control table - configuration not currently possible",
                        null,
                        null);
                   return;
        //@@end
    I'm not sure why you aren't creating a model object as I cannot instantiate my objects without it - maybe it is because you are using a non-adaptive WS model.  Why aren't you using the adaptive WS Model?
    Also, I don't see where you are creating a method/operation object, you only seem to create the top level Request object.  I'd expect you to need to create the operation level object too and add that into the request, as I do above.
    There is little point in outputting the stack trace like that - I always use the message manager object to display errors and debug message on screen.  I think you should at least add some debug messages to try and pinpoint what is going wrong.
    Gareth.

Maybe you are looking for