SRM 7: Open Technical RFx response button action in e-Bidding

Hi,
Can anybody tell me how to catch the event on click the button "Open Technical RFx Response" and check some validation logic and according to stop the event process by raisin an error message in SRM 7 Bid invitation process.

Can anybody say what is the Object Type for this action?

Similar Messages

  • SRM 7: Open Technical RFx response

    Hi,
    Can anybody tell me how to catch the event on click the button "Open Technical RFx Response" and check some validation logic and according to stop the event process by raisin an error message in SRM 7 Bid invitation process.
    Edited by: Angshuman Chakraborty on Jul 27, 2011 12:37 PM

    Hi Chakri,
    You can reset_mesages by deleting message log. try this.. it might helps.
    data: l_wd_view_controller         type ref to if_wd_view_controller,
            l_api_wdr_msg_area           type ref to if_wd_window_controller,
            l_wd_message_area            type ref to if_wd_message_area.
      l_wd_view_controller ?= wd_this->wd_get_api( ).
      l_api_wdr_msg_area ?= l_wd_view_controller->get_embedding_window_ctlr( ).
      l_wd_message_area = l_api_wdr_msg_area->get_message_area( ).
      l_wd_message_area->reset_messages( i_keep_current = 'X ' ).  // try with 'X'. and ' ' .
    Cheers,
    Kris.

  • SRM Open Public RFx Response

    Hi Team
    Kindly we use SRM 7 Extend Classic Scenario and follow the follow scenario
    1- Create SC and Approve it
    2- Convert SC to Public RFx document and approve it
    3- Supplier create RFx response
    4- simulation log on is complete and each permission submit it
    now system should be ready to open supplier response to check best price but when I try to open any supplier response I got the following error
    Price RFx response opening has not been performed

    Hello Ali,
    Did you send a Quotation with price? or with price $0,00?
    If you would like to do a RFI without price, define the Detailed Price Information field with the value"No price".
    Rgs,
    Pedro Marques

  • SRM RFx Response Undo Accept/Reject Action

    Kindly we use SRM 7 EHP1 , when I try to find out undo accept or undo
    reject button on Screen but there is no button for undo action
    Is that available in SRM 7 EHP1 ? and if it is available why is not
    shown ? or need any configuration ?
    Please advise ASAP

    Hi
    1687814  - Rfx response is not editable after Undo Accept for purchaser
    is not correct note , my question is
    when I try to find out undo accept or undo
    reject button on Screen but there is no button for undo action

  • After approver reject RFx response(QUOT), is that possible tho open back?

    Hi Gurus,
    We are now implementing SRM 7 EHp 1 and with workflow in RFx creation and evaluation. During RFx evaluation, once the approval reject the quotation and the status will turn into REJECTED. Is there anyway to open back the quotation in order leave it as rejected.
    There is few scenario we facing at the moment.
    1. 5 lines item. Bidder A been partial award 3 items and Bidder B partial award 2 item. Both quotation route to approval in awaiting approver status. If approval reject bidder A quotation and put a remark to purchaser that bidder B should get the full award (5 items). Is that possible to handle by the system?
    2. 5 lines item. Bidder A been partial award 3 items and Bidder B partial award 2 item. Both quotation route to approval in awaiting approver status. The approval reject bidder A and accept bidder B. Could system handle the 3 items back to the sourcing cockpit?
    Best regards,
    Wind

    Hello Wind,
    Kindly refer to the thread Re: Quotation in Release Rejected Status, how does the purchaser can review it? , to solve your issue here.
    As per the standard functionality delivered with SRM 701, purchaser user should be allowed to view the details for the Rejected RFx response and he also he will be provided with the Undo Reject option to re-submit the response for approval to the purchasing manager.
    Hope this helps you.
    Best Regards,
    Rahul

  • InDesign Button Action for PDF – Open File (in new window)

    I am using the 'Open File' action on buttons in a document i am making which will eventually be a PDF, but am wanting to specify the button action to open the file (another PDF) in a new window.
    I have found that I can achieve this and add button actions with this specific behavior in Acrobat, but it seems to be missing in indesign's abilities as far as I can see. Is there a way to do this in indesign so that i do not have to tinker in acrobat after I have made my PDF. As if I have changes to the PDF, all buttons then have to be totally re-done each time, and i will have possibly 900 buttons!!
    Thanks.
    (Using indesign CS4)

    Jeff,
    You are correct. I want to have a DVD with multiple PDFs. The main one almost acting as a table of contents for the rest.
    Problem = the 'main one' is 62 pages long, many hundred buttons and every page has at least a few of these links needed.
    Which means, if you are correct (and I believe you are, hope you aren't) that I need to custom code these buttons in Acrobat.
    The method is easy, but x300 = painful. And then the kicker... Boss says, 'Change slide 30' ... which means: Back to InDesign, Export to PDF, Recode ALL BUTTONS.
    *Note, there are some 'interactive' buttons with roll over states. So I don't think replacing the pages would work.

  • Pricing in SRM for RFx response

    Dear SRM Experts,
    We are using sourcing scenario in SRM 7.0 EHP 1 and are inviting bids from international as well domestic vendors.
    Bids contain varoious price components apart from the basic price like deleivery cost, insuarance, packing and forwarding etc. Based on this price components we wanted to calculate the landed cost of the material.
    Since SRM only has one calculation schema 0100 for mainatenance group 01QU ( RFx response) i wanted inputs on how difference schema can be mapped into SRM for calculating the net price from RFx response.
    Any pointers on the same will be apperciated.
    Regards,
    Darshan

    Hi Ramki,
    First of all i am really honoured to have reply from you. I have referred your book many a times during the implementation as well as support phase.
    Presently we are working for one of the client wherein the requirement is that the responses received from various bidders having values against different pricing condition needs to compared before the L1 bidder is finalized and PO is placed. Landed cost of material needs to be calculated for the Bids received from international as well as domestic bidders which would have different conditions.
    I have created various condition types in the maintanace group 01QU (RFx responses). So that those conditions can be populated in RFx at time of publishing and we can receive the values against those conditions in response. There is need to calculate the landed cost of material at the time of comparison report generation. 
    Using IPC i think wont be feasible because anyways we need to calculate landed differently for domestic as international vendors. Also from stability perspective this is not advisable.
    I would request if i can get pointers to map this requirement.
    With Regards,
    Darshan

  • Help in button action to open a file that is attached to main pdf doc

    Hello,
    I have created a button and used an icon saying "click here...." the action I want to attach to it is to have on mouse down for it to open the file which is attached to the document.
    Is this possible?  If so how do I direct the acton of "open file" to be the one attached in document?  can't figure out path...
    there was a suggestion of how to make a javascript for the button action to open the attachment panel...
    this is what was written... and then below that is my question on what was written...
    thomp wrote:Try thisif(app.viewerVersion < 8)
    app.execMenuItem(....);
    else
    app.execMenuItem(....);
    what would go in the '(...)' above?
    I am very poor at javascript, but I am guessing that there is something I would need to fill in there? Am I correct?
    thank you...
    I, too, am trying to get my button action to open the attached document in my pdf form - NOT the navigation panel... I already have it doing that...
    thanks again for any feedback!

    Erin,
    After you set your link... go back into the edit mode, click on your link and go to Actions Tab, click on the "go to page view in another document' under the actions part of that tab (bottom portion of page), then click on Edit... it will open a 'Target Document' window and in the top portion click on 'open in...' drop down box and select 'new window'.... close out and SAVE!
    Hope that helps!

  • SRM RFx / RFx Response Condition Configuration

    Hi Team
    Kindly I need your help to know how configure SRM RFx /RFx Response condition
    Waiting your help

    Hi Team
    Kindly when add item condition at RFx document we got the following issue
    Error : Condition information is incomplete , so please advise
    Kindly find attachment document

  • Can't Create Contract From RFx Response (SAP SRM 7.0)

    Dear Expert,
    Could you help me,
    i have create rfx, response the rfx and accepted the rfx response.
    After i have accepted that RFx, i would like to make a contract from this RFx response. Via menu Create Contract.
    But this error is show up.
    Error application is coming up.
    20111020
    RHESAS
    093450
    sapgsd
    http://sapgsd.garuda-indonesia.com:8011/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif
    OBJECTS_OBJREF_NOT_ASSIGNED
    Access via 'NULL' object reference not possible.
    Method: PST95E57RQRHC49FBLT5QTJBJT9Z of program /1BCWDY/NC67WCWB50U4IGZ40GZ1==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/NC67WCWB50U4IGZ40GZ1==CP
    Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
    Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP
    Method: DO_MODIFY_VIEW of program CL_WDR_CLIENT_COMPONENT=======CP
    Method: DO_MODIFY_VIEW of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
    Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
    Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
    http://sapgsd.garuda-indonesia.com:8011/sap/bc/webdynpro/sapsrm/wda_l_fpm
    Do you have any idea to solve this issue?
    (we are activate Procurement for Public Sector Functions )
    Regards,
    Rhesa Syahrial

    Hi All,
    I have solved this issue.
    I missed the configuration in Partner Grouping schema ID.
    Regards,
    Rhesa Syahrial

  • PO  creation From accepted RFx response

    Hi,
    Please can you help ME, i am not able to create PO of services, here is my process :
    SC created in SRM - > SC goes to sourcing -> buyer creates RFx -> RFx is sent to bidder -> bidder processes RFx Response -> buyer accepts RFx response -> buyer creates follow on document (PO) from RFx Response (create PO).
    Error message:  /SAPPSSRM/HIER 015
    Product type XXX  of item differs from type XXX of product XXX.
    N.B : PO based on materials number work fine.
    Thank you,
    Karim

    Hello Ivy,
    I'm working with Karim, here are the maintained entries:
    (I've not listed all Z entries, they have all the same assignments)
    BIDP    HIER_SE   
    BIDX    HIER_SRM   
    ECPO    HIER_SRM   
    EXTR    HIER_SE   
    PCTR    HIER_SRM    Achat de services
    QUOT    HIER_SRM    Achat de services
    RFCR    HIER_SRM   
    RFPM    HIER_SRM   
    RFPP    HIER_SRM   
    RFPS    HIER_SRM   
    RFQU    HIER_SRM   
    ZAMI    HIER_SRM   
    ZAVN    HIER_SRM   
    ZBCC    HIER_SRM   
    ZCRS    HIER_SRM   
    ZCTR    HIER_SRM   
    ZCVN    HIER_SRM   
    ZMAL    HIER_SRM   
    ZMCA    HIER_SRM   
    ZMCR    HIER_SRM   
    Thanks in advance
    Stéphane

  • Collaborators in SAP Sourcing 10.0 must not view RFx responses unless assigned as scoreres

    Dear SAP Sourcing Specialists,
    We are implementing SAP Sourcing 10.0 We assign collaborators on an RFx as
    with the collaborator approver role before it is published, and these collaborators
    review, edit and  approve the RFx and then it is published to suppliers. After responses are  received from suppliers and RFx is now in
    Closed for Responses phase, we do not want these original collaborators to view the RFx responses unless they are assigned as scorers.
    How do we achieve this? We tried to re-assign the  Review collaborator role to these collaborators but they can still view RFx
    responses.
    Steps to reproduce the issue:
    1.Create an RFx in SAP Sourcing 10
    2. Assign collaborators with approval role
    3. Collaborators approve RFx
    4. Move RFx to Open for Responses
    5. Suppliers respond to RFx
    6. Rfx closes. RFx becomes "Closed for Responses"
    7. Log in as one of the collaborators
    8. We do not want the collaborator to view RFx responses unless assigned as a
    scorerer
    Kind regards
    Pedzi

    Why don't just use standard functionality in Page Customisations?
    You can Hide/Unhide a Tab with Dimension Field <%USER_GROUP%> and Group Reference.
    It's a clean, standard way and guaranteed to work and not break anything.
    Bogdan Toma

  • Create RFx Response: An error occurred in the PD Layer transaction terminated

    Hello Experts,
    Currently we are in SRM 7.02 implemenation: we are facing below problem while creating RFx response with popup screen.
                             "An error occurred in the PD Layer transaction terminated"
    For this we have checked below
    1. http://scn.sap.com/thread/1912966    ----> it didn't help
    2. We have assigned SAP_ALL role to bidder also ----> Facing same issue
    3. Check Number ranges ---> everything is fine.
    there is no clue from above points.
    Thanks & Regards
    Sandeep.

    Hello Sandeep,
    I am facing the same problem while creating the RFx response in SUS side. Same error occurred while i am creating the Rfx response with bidder.
    error: An error occurred in the PD Layer transaction terminated
    Could you please let me know, did you find any solution for this issue?
    Thanks in advance!!
    Thanks,
    Anil

  • A fatal error occured in the PD Layer during create Supplier RFx response

    Dear SRM 7 Experts,
    I am implementing SRM 7.  I can successfully create a Supplier RFx Response on behalf of a supplier using the Surrogate Bid functionality.  However, if I log on as a supplier contact person and try to create a Supplier RFx Response, I get error u201D A fatal error occured in the PD Layer. The transaction needs to be terminatedu201D. 
    Number ranges for Supplier RFx response (BUS2202) are maintained and assigned to the transaction type correctly.
    What could be the problem? 
    Kind regards
    Pedzi

    Hi
    Here is the thread which solved the same problem:
    Re: A fatal error occured in the PD Layer during RFx response
    with regards
    Manjunath

  • Condition type error in RFx response

    Dear Experts,
    I have created a new condition type with condition class Discounts/percentages
    and with Fixed amount.
    This created a condition type i ahve mainatined in the "process condition group" under maintanace group '01QU' so that i can excluisvely use for at the RFx response.
    When i am processing the RFx response i am getting an error
    "A fatal error occured in the PD Layer. The transaction needs to be terminated."
    Kindly advise .
    The intention is i have to certain condition types exclusively at the time of RFx response.

    Hi Saha,
    I have not create a new condition in my template, but... I have the same error when I try to create a Quot as Vendor "A fatal error occured in the PD Layer. The transaction needs to be terminated".
    I´m in SRM 7.0 with SP 08.
    Any Idea?
    Thanks,
    Pedro Marques

Maybe you are looking for