SRM ADDON ON ECC ( Material Replication)

Hi expert
We had activate the addon of srm on our ECC.
We replicated the categories product with cockpit syncronisation,
we tried to replicate material using MDS_ECCMAT_PRODMAT ---> without result
We tried to replicate material using MDS_PRODMAT_ECCMAT ---> Without result
In the syncronisation scoop, we choose 'ONLY Materialdata' and ' material and relationship data'
This method is correct? or we schould take onother way?
Please any one can help us?
Best regard

As above people suggest: re-check customising, everything done correctly?
Now to the addition: what you see is correct behaviour, the initial download is started from SRM, so it sends the request from SRM outbound to ECC inbound and then the data from ECC outbound to SRM inbound.
Basically, check all queues in all directions to see if there is a sysfail somewhere.
Regards,
Robin

Similar Messages

Material Replication from ECC to SRM 7.0

Hi Experts,
I am working on Extended classic scenario SRM 7.0 with ECC 6.0, I have created the Material Group and Master data in ECC system. While doing replication via R3AS i am getting the following error msg( I have applied Note 720819 & 330401in ECC ).
Errors:
Hierarchy for material types does not exist
(Before materials are imported from the ERP system, the material types from the ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).)
MATERIAL: Object will not be loaded
Pl do the needful.
Regards
Mohan

Hi Pl check whether you follwed these steps are not.
Hi find below for the product cat
Steps to create the product category in SRM:
1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
3) Do a test and check if the product category is available for procurement in SC.
Regards,
Satish

Material replication from ECC to SRM

Dear SRM 7.0 Experts,
We are implementimg SRM 7.0 and we are trying to execute the Initial Load of materials into SRM 7 from ECC. We have completed all the Middleware settings and all the customising required for material replication. Whe we run the initial load (tcode R3AS) and select the first object DNL_CUST_BASIS3, it runs but the status remains "Running" in R3AM1. There is no errors in SMQ1as the entry runs and completes and therefore disappears. There is no errors recorded in SMW0 or SLG1 either. What could be the problem?
I checked in SMQ1 & SMQ2 as well, but there is no entries here for the object DNL_CUST_BASIS3. what we can do to resolve the issue ?
Regds,
Cb

Have you checked the outbound queue in backend R/3 system ?
Have you defined the additional user in CRMCONSUM table apart from the CRM user?
Verify and, if necessary, change or insert entries in tables CRMCONSUM and CRMRFCPAR as
described in SAP Note 430980. See also SAP Note 720819.
Hope this helps you.
Regards
Abhijeet

Material replication ECC-SRM, in wrong queue (outbound in SRM system)

Hi,
I'm working in SRM 5 integrating with multiple ECC systems.
When attempt to replicate materials from one of the ECC systems, if I run the transaction R3AS for MATERIAL, the Monitor Load Transaction shows the object is "Running" indefintely.
I checked the inbound queue in SRM and there was nothing there, then I checked the outbond queue also in SRM and the entry is there.
Which means its in the wrong queue it should be in the inbound queue.
By the way there was nothing related to the object in the queues on the ECC side.
Can anyone point me in the right direction to fix this.
Thanks and Regards'
David

As above people suggest: re-check customising, everything done correctly?
Now to the addition: what you see is correct behaviour, the initial download is started from SRM, so it sends the request from SRM outbound to ECC inbound and then the data from ECC outbound to SRM inbound.
Basically, check all queues in all directions to see if there is a sysfail somewhere.
Regards,
Robin

Material replication from R/3 to SRM - Issue with Material group

Hello All,
                  I am working on BADI PRODUCT_CUSTOMER2 and method MAP_R3_TO_CRM_MATERIALMaterial replication part from R/3 to SRM.
I am using a Ztable to map r/3 material group to SRM material group(Product category).
For example Material M1 with material group 100 is transferred to SRM. Material group(Product category) 100 exist in SRM, but I am changing the material group to 200 in the product_customer2 badi. its working fine.
In another scenario, Material with material M1 with material group 300. Material group(product category) 300 does not exist in SRM,
I am changing the material group to 200 in the bdoc, in the product_customer2 badi. It is not working. The LUW is failing in SMQ2 transaction with the error "Error in Mapping (Details: transaction SMW01)". The BDOC is failing with error "Category for material group 300 does not exist"
I tried to deactivate the badi PRODUCT_CUSTOMER2, even then the FM MAP_BAPIMTCS_AND_PROCESS is validating the material group from R/3.
I tried to change the material group 300 to the existing material group 200 at initial stage in debugging in function module MAP_BAPIMTCS_AND_PROCESS but still the bdoc is failing with error "No storage form defined for product type 01 / logical system".
I am doing my testing using the following steps.
1. change the material descriptioni in MM02 in R/3.
2. An item is displayed in the queue in SMQ2 in SRM.
3. I have debugged the LUW and analyzed my badi by setting breakpoint at method MAP_R3_TO_CRM_MATERIAL, its changing the material group in the bdoc properly.
   that didnt work.
   also i tried to change the material group in the function module MAP_BAPIMTCS_AND_PROCESS before the badi is called.
4. I am checking the BDOc status using tcode SMW01 and checking the material using tcode COMMPR01.
can someone tell me how I can change the R/3 material group to SRM material group at the time of mapping in SRM?
Thanks
Sathish PM

Hi find below for the product cat
Steps to create the product category in SRM:
1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
3) Do a test and check if the product category is available for procurement in SC.
Regards,
Satish

Overwriting Conditions data during Material Replication from R/3 to SRM.

Hi,
 When creating a new info record and then running the material replication program everything looks OK. However, if for the same material you create a new info record or change the existing info record and then run the material replication, some of the previous data is removed.
 We implemented BADI(PRODUCT_CUSTOMER2) to read info records from R/3. When i debug BADI all the info record and condition info is populated. Once the control leaves the BADI standard SAP code is not inserting/updating delta condition records. It is only populating latest info record.
 SRM 4.0
 Support pack level : 11
 BADI Name: PRODUCT_CUSTOMER2
 Method Name: MAP_R3_TO_CRM_MATERIAL
 Conditions Populated in structure : COMT_PROD_SERVICE_BDOC- CONDITIONS-CND_BBP_WORKING_SET.
Thanks in Advance,
Vineela.

Hi
Please go through this ->
Note 715213 Interface change in BAdIs in Release SRM 4.0
Note 689135 Conditions are not downloaded when product is updated in R/3
Note 534899 - Inconsistencies in the Content Workbench
Note 420343 - TIP: Backend price transfer in product conditions
Note 459640 - Category error when transferring backend prices with report
Note 415839 - Removing errors in external product interface
For pricing condition type, go to the SAP Help links
http://help.sap.com/saphelp_srm30/helpdata/en/72/f40f3c98ddaa4ce10000000a11402f/content.htm
and also
http://help.sap.com/saphelp_srm30/helpdata/en/ee/d9df3bbcce4b37e10000000a114084/content.htm
Do you use IPC for pricing? I am not sure whether you can use R/3 4.6C with SRM5.5. Check your systems. Refer SAP notes 539720 if you are using simplified pricing (Classic scenario).
Also check for SAP OSS Notes - 394975 and 420343
Update of price in srm is possible through the SAP OSS Note 420343. This note describes an option to transfer a price from the Backend via a report and a BADI and to store this price in the condition table of the corresponding product in the EBP. But you have to do small changes,i think this note will certainly helps you to transfer material master prices to srm product master automatically.
Update Price in SRM 5.5 Automatically using report - EBP_GET_BACKEND_PRICES
Re: Update Price in SRM 5.5 Automatically using report EBP_GET_BACKEND_PRICES
Condition Type SRM - ECC
Re: Condition Type SRM - ECC
Re: Replicating additional fields (R/3 4.7) to SRM product master
Transfer Inforecord Conditions Scales to SRM Product Master
Hope this will help.
Regards
- Atul

SRM 7.0 - CRM middleware settigns for material replication

Hello SRM Guru's
Can you please provide me detail step by step process of CRM middleware settings for material replication from ECC 6.0 SRM 7.0?
Thanks.
Regards,
Magesh.

Hi,
Configuration Guides are available in SAP Solution Manager Server. Downloaded offline version is also available in SAP Service Marketplace. http://service.sap.com/srm-inst
Please check a good blog by Marcin Gajewski. /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
SDN has search functions. You can find solutions for your issue.
Regards,
Masa

Material replication without registering queues in SMQS and SMQR in SRM 7.0

Hi,
Please help me to understand following:
What is the use of transction SMQS and SMQR ?
what is the use of registering inboud and outboud queue in SMQS and SMQR ?
Do material replication will not work if I will not register any queue in the said transaction code ?
If yes, what are the queue I need to register in SRM and ECC respectively ?
Regds,
Jennifer

Hi jenny ,
1. T code SMQS is used to register a destination and prior to this u need to define your destination by using T code SM59.
2.T code SMQR is used to set up the ques.CRM ---> CRM Middleware and Related Components -
>Queue Setup à Register CSA Queues.
3. to monitor and organise the Inbound and outbound queues.
Sachin s

Material replication errors - SRM 5.0

Hi all,
Iam getting error when i replicate material master from r3 to srm.
i successfully done service replication in to srm system, but material not.
error is :
Allocation of the tax for country IN, sequence 1, value 0 not possible
Message no. SRM_PRODUCT_SALES038
followed steps:
1. maintained all middleware parameters
2. R3AS , Load object as material , source site and destination site, selected source system and executed.
3.smq1 - no q's in the line
4. smq2 - the following q's re there.
R3AD_ATTRIBUTE
R3AD_CLASS
R3AI_MATERIAL
SRMD_ATTRIBUTE
SRMD_BUPA_MAIN
SRMD_CLASS
SRMD_MATERIACONTAINER
SRMD_MATERIAFINISHED G
SRMD_MATERIAHOS-A1
SRMD_MATERIAHOS-D21B
SRMD_MATERIAJEPLLEAS
SRMD_MATERIAM1
SRMD_MATERIAPAC01
SRMD_MATERIAPMTEST_MAT
SRMD_MATERIATEST_MATER
5. selected R3AI_MATERIAL and executed - status shown as SYSFAIL. due to error mapping.
6. SMW01 - checked the logs - error appeared like this.
Allocation of the tax for country IN, sequence 1, value 0 not possible
Message no. SRM_PRODUCT_SALES038
7. Went to R/3 material master - checked any material is having SALES VIEW with a tax code,
No where i found any thing in that....
Friends....need help...i stuck up...with the error....
any clues ...
regards
sai

Reason for the above problem is :
we need to maintain filter settings in R3AC1.
TABLE STRUCTURE: MARA
Field: PSTAT
OP:EQ
Incl/Excl : I Inclusive defined
I run the R3AS again after these settings,material replicated successfully.
thankyou so much muthu.
Very useful tips.....
regards
sai

Material Replication from R/3 to SRM - Object status stuck in Running mode

Hi Experts, I am new to this Forum and I am facing the following issue,
System Info :
SRM 5.0
ECC 6.0
I am trying to replicate two materials from the backend R/3 system and have set material filters on the SRM side.
The filters are Table: MARA, Field: MATNR, OP= Equality(=low), LOW = T-SRM13, inclusive defined.
The filters are Table: MARA, Field: MATNR, OP= Equality(=low), LOW = T-SRM113, inclusive defined.
This is my sequence of operations in SRM:
I deleted exisiting queues, started initial load and then activated the inbound Queues for my client.
Then when checking, Monitor Load objects in SRM, the status for Material is stuck in Running mode with an yellow sign.
Please let me know if you have any advice.

Hello,
First of all, check RFC queues in transatcion SMQ1 and SMQ2 for any detailed information.
Make sure if Your RFC user has SAP_ALL authorisation - if not add it and delete all material queues and run again.
Make shure if You run report BBP_PRODUCT_SETTINGS_MW with proper option and unchecked "Test mode". Once you have done this rerun your initial load for DNL_CUST_PROD0, DNL_CUST_PROD1, BASIS3 and MATERIAL.
Regards,
Marcin Gajewski
Please reward points for helpful answers.

Why SAP SRM material replication happens through CRM middleware?

Can some one help me to understand, Why SAP SRM material replication happens through CRM middleware? Is there any functional/Technical reason behind this design?

Dear Sridhar,
SRM releases later SRM 4.0 are working with the same middleware implementation,
there where no changes between the releases. The SRM middleware implementation
was decoupled from the CRM middleware development at that time.
(Middleware is based on the basis functionality of queued Remote Function Calls qRFC)
Regards
Laszlo

Material replication between SAP and SRM

Howdy friends.
Is there any way to stop having to manually activate the material replication queue between SAP and SRM each time please?
Our admin team go to transaction SMQ2 each day and for 2-3 years have been manually activating each queue manually and doing this several times per queue as the entries do not reach zero. Surely, it is possible to set this up to be automatic as a job?
Ciao,
Mike

Hello,
I could not find the SDN Weblog but here a link to an article that migh help you....[url]http://searchsap.techtarget.com/tip/0,289483,sid21_gci1245134_mem1,00.html[url]
That should help you check your settings, et al and resolve your issue.
Regards, Dean.

Vendor and Material Replication from ECC6 Ehp7 to SRM7.0

Hi Experts,
I am facing an issue with replicating Material and Vendor Master from ECC to SRM system.
ECC system - ECC6.0 Ehp 7 & SRM system - SRM7.0
Middleware setting is done as per Note 720819 and performed the object like DNL_CUST_BASIS3 , DNL_CUST_PROD0, DNL_CUST_PROD1 and found Sucess in SRM R3AM1.
Errors :
1. Material Replication Error in SMW01
Mat. for Initial Download: Table not supported by function
Alternative units of measure are inconsistent; correct the values COM_PRODUCT_UNIT COMM_PR_UNIT
Alternative units of measure are inconsistent; correct the values
Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT.
2. Vendor Replication Error in BBPGETVD
Backend systems with Release 740 are not supported
Message no. BBP_BUPA002
What are all the compatabilty issues will be faced connecting SAP ECC6 Ehp7 with SRM7.0? Can any one list down.
Please Suggest the valuable comments to resolve the problem as earliest.
Thanks & Regards,
Ramprakash N

Dear Ramprakash,
Please check below URL for #1.
Alternative units of measure are inconsistent; correct the values in SMW01
Please find the following note which might help you for issue #2.
1313972
1349825
1372175
Thanks
Shuvrajyoti

Why we need crm middleware for material replication?

Hi Experts,
Why we need CRM middleware for material replication from ECC to SRM when we can do the vendor replication from ECC to SRM with ABAP report? IS there any technical limitation?
Thanks and regards,
Ranjan

Hello,
Vendors and locations, for example, you can replicate from ECC to SRM using ABAP reports.
However, if you want to replicate the following information, you should use the middleware:
- DNL-CUST-BASIS3 - Basis CRM online
- DNL-CUST-PROD0 - Material number conversions
- DNL-CUST-PROD1 - Product : categories
- DNL_CUST_SRVMAS - Customizing: Service Master
- MATERIAL - R/3 Material Master
- SERVICE_MASTER - R/3 Service Master
Check note 872533. It provides more information.
Regards,
Ricardo

Why do we need to define RFC destination and user for material replication

Dear Experts,
why do we need to define RFC destination and user for material replication? Here we use crm middleware only for material replication. Could you please help me to understand it?
regards,
Ranjan

Hello,
As far as I know, you can use the same RFC destination already available in ECC to SRM to replicate materials.
You can refer to note 720819.
Regards,
Ricardo

SRM ADDON ON ECC ( Material Replication)

Similar Messages

Maybe you are looking for