SRM as an Add on to ECC

Hi All,
Can anybody please forward me the presentation for SRM as an Add on to ECC
6.0. Also please provide any other presentations giving overview of SRM activities
and configuration steps.
Regards,
Sourabh

Closed

Similar Messages

  • Vendor Migration issue for SRM as add-on to ECC

    Hello Experts,
    I am working on SRM as add-on to ECC.
    When I am trying to migrate vendors from ECC to SRM using MDS_LOAD_COCKPIT. Within monitor, all queues are 'green' indicating that data has successfully migrated to SRM.
    But when I check vendors in trx- ppomv_bbp, i don't see any vendor being migrated from ECC. Neither the BPs are crated for these vendor masters.
    I have configured all necessary configuration- i.e.
    1) I have carried out necessary settings in tables-
    mdsv_ctrl_opt_a
    crmc_but_call_fu
    v_tbc001
    2) In addition, I have maintained backend Purchase Org in PPOMA_BBP.
    3) I have checked RFC connections, definition of logical systems and
    it seems to be alright.
    Can anybody please guide if I am missing on any config or can point
    me in right direction to investigate??
    At SRM GUI, I tried making a local vendor using 'BBPMAININT' but end up in a short-dump.
    Can you please help?
    Thanks and Regards,
    Amit

    Hi,
    if you problem is still existing, following might be possible solution. Try it.
    Maintain Table BBP_MARKETP_INFO with corresponding Vendorroot ID (ex. VG50000....) that you already created in the PPOCV_BBP trx.
    Hope it helps.
    Regards
    PM

  • SRM 5.0 as an Add on with ECC 6.0

    Even i have the same question on how we would manage the distibution model when the SRM System is installed as an add on with ECC. Since being on the same client here are some of the Questions. I have also opened a new thread on this.
    1.) How would the distribution model be distributed when on the same client?
    2.) How would the Documents flow between two different systems?
    3.) In an SUS-MM scenario, how would this be handled when installed on the same client?
    4.) How would material and vendor replication facilitated?
    Any thoughts would be highly appreciated !!
    Thanks,
    Sundeep

    Hi Sundeep,
    I have answered for vendor replication here :
    One Client Solution
    For product category, material and material type replication, this is same process through activation of relevant objects in table mdsv_ctrl_opt_a
    Then you have to trigger the replication through mds_load_cockpit
    For SUS, you have to select SUS_ONE (instead of EBP_ONE) in table bbp_backend_dest
    That all what i know so far
    Kind regards,
    Yann

  • SRM 5.5 as an add-on on ECC 6.0 vs SAP SRM 5.5 server

    Hi
    Are  there any limitations if we go with SAP SRM 5.5 Server as an add-on on ECC 6.0 compared to Implementation of SAP SRM 5.5 server on its own.
    FYI-We just have one ERP Back-end system.
    BTW, what is the difference between SAP SRM server 5.5 vs SAP SRM server 5.5 Plus.
    Thanks in advance.
    Thanks & Regards,
    Anji

    Hi
    Summary:
    You can use classic scenario in Add-on.
    You can use self-service procurement and SUS in Add-on.
    You cannot have Sourcing and other scenarios.
    No migration from Add-on to Separate server available.
    Best regards
    Ramki

  • General Understanding SRM as Add-On to ECC 6.0

    Since I checked in this forum there is no configuration guide for SRM as Add-On available I have some general problems. Does SRM Add-On as single client installation with ECC 6.0  require replication and download of data objects and do I have to maintain the middleware parameters? If it is like this I understand why tere is no specific configration guide for SRM as Add-On!
    In Detail:
    When I configure SRM as Add-On do I have to replicate objects like product, product category, customizing (UOM), vendor from the backend as in stand alone implementation?
    Do I also have to replicate organizational structure via report from the backend or can I use the organizational structure form the backend directly for the SRM?
    Do I have to download the locations from the backend?
    Rgds.
    Dieter

    Hi
    ECC 5.0 does not come with EBP or SRM. ECC 6.0 (ERP 2005) comes with SRM Server as an add-on. Only self service procurement and supplier enablement scenarios are supported. Not recommended for sourcing scenarios and multi-backend deployment options.
    <u>Please look at http://help.sap.com/erp
    Then click on SAP SRM for ERP.
    you will find very good documentation here.</u>
    <u>Please go through these detailed pointers for more information -></u>
    http://help.sap.com/saphelp_srm50/helpdata/en/43/028c9ce2a35158e10000000a1553f7/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/index_srmaddon.htm
    What is hub deployment?
    Re: SRM as ADD On in ECC6.0
    SRM@ERP2005
    Re: SAP SRM - ERP INTEGRATION
    Re: SAP R/3 MM and Electronic external Catalog
    SRM Server as an Add on to ERP 2005
    SRM as an add-on to ERP 2005
    Hope this will definitely help.
    Regards
    - Atul

  • SUS when SRM is add-on for ECC

    Gurus:
    Did anyone implemented SAP Supplier Self-Service when you have SRM Add-on in ECC (SRM One Client Scenario)?
    Any help is well appreciated.
    Regards,
    Vijay Alisetty

    In a security point of view the production SUS should stay in a independent server. I think that you have to see this with the security team. The vendor's companies are going to do log-on in your SUS system (via web).
    Two years ago, analyzing SRM versus SRM add-on SAP told us that materials with MRP are not supported with the add-on so the company decided to do not use the SRM add-on. SAP told us that contract management is not supported also with the add-on.
    We did not use the SRM add-on for other motives (MRP). Did you asked SAP his advice using SUS with the add-on.
    Hope to help you.
    Marta

  • PR to SRM--Unable to see XML in ECC system

    Hello,
    We are on ECC 6 EHP4 and SRM 7.0. We are trying to send PR to SRM system. We were able to send requirements initially, but from past 6-7 hours none of the requirements are transferred. I do not see any XML messages generated.
    Please help me in finding the cause of this behavior.
    Note: No configuration changes are done in the system.
    Thanks,
    Arahanth

    i dont think system uses XML messages to send PR from ECC to SRM system.
    PR's are transfered to SRM and shopping carts created using RFC calls , please check the LOGS in the transaction SLG1 in both the SRM system and also in the ECC system.

  • EWM deployment as an add on to ECC 6.0

    Hello Experts,
    We are implementing EWM as an add on to ECC 6.0. Anybody can please guide on step by step procedure to implement this? Is there a SAP best practice for implementing EWM? Please route to any useful documentation.
    Any help is highly appreciated.
    Thanks,
    Khan

    no answer.

  • SRM as an add-on to ERP 2005

    Hi Experts,
    I am interested in the Pro's and Con's regarding SRM as an add-on to ERP 2005.
    - what is the limitations? Disadvantages?
    - What kind of business situations are suited for this scenario?
    - What are the benefits?
    I hope you can help me here!
    Thanks in advance!
    Kind regards
    Line Wiuff

    Hi,
    I'm a current user of the add-on.
    My organization had an ITS implementation for Purchase Requisition in 4.6 and decided to migrate to ECC6.0 with SRM 5.5 instead of maintaining the old development (I joined at testing phase).
    Our scenario is currently limited to shopping carts and customizing was intentionnally kept at minimum level.
    The go live happened in November last year.
    We have 600+ users among which 100 approvers.
    My feedback:
    --- integration with HR was not an easy job (mainly because we had Organization Management in our previous implementation).
    - we had a big performance issue because our users had been spammed internally by PSM module for 3 years (the system didn't manage to display mailbox with 10'000+ documents, solved by cleaning...),
    - given that previously users were creating PR the transition was not really smooth (they re-order similar tings all the time),
    - still struggling with an address issue (address on each line of the printed PO if generated from more than one shopping cart). In theory I understand the back-end can be fed with whatever we want but we're not there yet (we may miss MM expertise though).
    - quite a lots of notes to apply.
    + it enabled us a direct connection to PSM (Public Sector Management) which is really good in our context (custom n-step approval, use of a BADI),
    ++ we plan some B2B connection, I already tested it and it was really cool (you shop on another web site, and when you check out there is almost a PO).
    ++ OSS support good.
    Regards,
    Anne

  • No Range for CP in SRM 7.0  in case of ECC HR Org Structure replication

    Hi Experts,
    We have SRM 7.0 , in case of ECC HR Org Structure replication, where we maintan the No Range for CP  ( Employee replicated from ECC) in SRM ..I belive it is External ( In ECC it is at PA04 for Employee )?
    Thanks
    NAP

    You need to schedule program RHALENI in Insert mode to achieve the same
    Thanks,
    Sundeep

  • Logon srm 5.5 add-on ecc6.0

    I have installed srm 5.5 add-on ,but i don't know how to logon it.

    Hi
    Hope this is helpful.
    http://help.sap.com/saphelp_srm50/helpdata/en/55/711e14c0681f418b8b7722fd3c0dc6/frameset.htm
    Thanks

  • SRM 7.0 Add Fields in Account Assignment Table

    Hi SRM Gurus,
    I am working on SRM7.0.
    I want to add two fields in Account Assignment Table in Account assignment tab of Shopping cart Item.
    I can do it using WebDynpro Enhancement framework , i.e.
    1) Create an append structure for Structure INCL_EEW_PD_ACC_CSF
    2) Enhance WebDynpro Component : /SAPSRM/WDC_UI_DO_ACC - Component controller node
    3) Map this with View  V_DO_ACCOUNTING Node
    4) Create the necessary Table Columns and Column editors in Account Assignment Table
    However i think using SPRO configuration and enhancing few structures also this can be achieved.
    Can anyone guide me on how can i achieve it without creating WebDynpro ABAP Enhancement?
    Regards,
    Ashish Shah

    I've never done it with account data, but yes with header and item.
    I think in this case you need to add these fields in SPRO:
    SAP Supplier Relationship Management --> SRM Server --> Cross-Application Basic Settings --> Extensions and Field Control (Personalization) --> Configure Field Control --> Configure Control for Fields of Substructures --> Metadata for Fields of Substructures and Table-Like Enhancements
    Adding the fields with "Set Type" = 31 Accounting...

  • SRM PO not getting transfer to ECC Backend after SP07 upgradation

    Dear Gurus
    We are in Classic scenario SRM 7.2
    Recently we have upgraded SP07 in R/3 system ECC 6.6.
    Prior SP 7 upgradation SRM PO created against RFx response were getting transferred to ECC backend in Held status with couple of error messag
    (which later user use to do further changes in ECC)
    Now post SP7 upgradation, we are finding an error in SXMB_MONI as"Error in Receiver Side ABAP Application
    not finding much help in debug thorugh SPROXY
    can anyone guide on this issue
    Thanks & Regards

    Dear Elham,
    To find the solution of the problem I think you need to debug.
    Follow below steps if this help you
    a) Run the report "FBGENDAT"
    b) Input the data as below screen shot
    c) Then go to se37 execute FM : BAPI_PO_CREATE1
    d) You will find the test data directory and test data will be saved as below
    e) In this test date change PO number you should get the error which you are getting above.
    Thanks
    Ankit Jain

  • Need to Add Language in ECC 6.0

    Dear All,
         We have ECC 6.0 system and running for one year with two languages English and German. Now I want to add one more language to the system so that user can log in using new language. Plz let me know the required steps to be taken care before adding language. I need information regarding effors that we need for this activity. If possible, plz share a project plan for the same.
    Thank you so mcuh in advance.
    Regards,
    Chandra.

    Is your system Unicode? non unicode?.
    What language?
    Regards,
    Alfredo.

  • SRM PO DO NOT REPLICATED IN ECC 6.0

    I have a problem to migrate SRM po to ECC 6.0 
    the workflow is WS14000075 without appobal Completed but The PO does no migrate.  the trx. RZ20 show the next. message
    Comm. error checking account assignmt for purchase order 400000000.
    the PO is Local ECS (extended classic)  in SPRO in settings is like NO Validate FI in System Logic SRM LOCAL b2b.
    mi RFC is OK. configurated.
    some suggestions?

    Hi Oscar
    wha tis the piece of account information
    cost center
    PM order
    Networkorder
    are any one has been inactivate ot tECNICALLY COMPLETED?
    ARE GL ACCOUNT IS VALID - WHAT IS THE  GL ACCOUNT is it expecnsive GL  account  ?
    what type of purchase order - Direct material or indiect material ?
    com.error - is it happening for only one purchase order.?
    bbp_document_tab any entry for this Purchase order.
    Muthu

Maybe you are looking for

  • Hp6500A plus. When I scan a document to PDF it is produced as a BMP file.

    My scan settings are correct and have been saving correctly. All of a sudden the scanner starts producing a BMP file instead of a PDF file.  It doesnt matter what i do it will not work correctly.  I have switched off eveything , retstarted , checked

  • Problem with Function returned without value  -

    all i am having a problem w/ jdev passing the values. when hardcoded it works. when i remove to pass the 2 vals for doc_type and doc_num the params are being passed to the impl but the String sql = " BEGIN :5 := scotts_test_proc.get_log(:1, :2, :3, :

  • Some things have gone wrong

    There seems to be a light purple spot on my iPod. It is not located on the screen but near the scroll wheel. It will not rub off. Also my back light is wigging out. I have it set on 2secs and have the brightness all the way down. This is to conserve

  • F4 functionality on selection screen

    Hi, i am having One requirement that  need to create f4 functionality on selection screen. please give me solution on that

  • Base Unit of Measure issue

    Hi Experts, As per the scenario, my client is manufacturing a rod whose std length is 6m. But, he is selling it in other sizes also like 4.3, 5.5 so on. So, the price should be get calculated on length & no of pieces. As, per my understanding I had p