SRM back end service PO not showing NAVS value in Item condition

Hi,
We are on classic scenario.When PO for services created in backend from SRM, in item details view under conditions,NAVS value seen as '0' but at service level it shows the correctly calculated value for NAVS.
When PO crrated in ECC dierctly for service it correctly shows up NAVS value both at item level under condition tab & also in service condition
Any suggestion
rgds,
arjman

requirement closed

Similar Messages

PMI Problem (End-to-End Monitor does not show data)

(End-to-End Monitor does not show data)
As I know that XML Messages Alerts T-code: SXMB_NOMI shows all alerts including errors as well I put date Range: 01-01-2008 to 01-08-2008 and filters for "Errors" system does show more then 300 errors
But problem in RWB - End-to-End Monitoring, when I click on display and date range 01-01-2008 to 01-08-2008 its give me graphical overview in right of window
and shows summary:
Errors:                     0 Average
Open                  904 Maximum
Successfully Completed         0 Minimum
Overall:                  904
I thing End-to-End Monitor doesn't get data from PMI...
why does't show any errors, which is shows in SXMB_MONI
Please tell me how to resolve that problem
Thanks in Advanced
Edited by: issue2008 issue on Aug 26, 2008 12:02 PM

Hi,
A destination pointing to the Integration Server is created on the J2EE engine to collect the data for the end-to-end monitoring. If this destination is incorrect or if there are several clients in the system of the integration server, the data may be sent to the incorrect client.
This might be a reason so you can implement the correction of the destination in a manual way as follows:
Open the J2EE visual administrator.
Select the Destination service.
Select the HTTP "pmistore" destination.
Enter the URL for the ICF service spi_gate of the Integration Server in the following form "http://<host>:<port>/sap/bc/spi_gate?sap-client=<xxx>", where 'host' denotes the host of the integration server, 'port' denotes the HTTP port, and xxx is the client of the Integration Server.
Thanks,
Hemant

Service Interfaces not showing in the IP when imported in ID in PI7.1

HI Experts,
     I have developed an Integration process(IP) in ESR using some Service interfaces and Operation mapping for implementing BPM.
I am trying to import the IP into my Integration Directory. But the imported Integration process(which is now as good as a Business Service) does not show the Interfaces i have used in the BPM in the ESR.
   Without the interfaces being attached to the IP, i cannot create RD and ID's.
This is the first time BPM is being configured in this server.
Please guide me if there are any settings specific to ccBPM to be done in ECC.
Please help me resolve this issue... i am in a crictical condition to meet the deadline..
Thanx in advance,
Nandan

Hi Neetesh,
         Thanx for your reply. If there are any initial settings to be done in PI, please list them so that i can check if they exist in our system.
Also,when i check(f7) my IP , its showing a message that " Container element my_interface in step Send1 is initialized but is not used ". Is this a concern ?
I have copy pasted my interface names in the RD and InterfaceDtrmn in my ID and completed the ID part of configuration.When i test the BPM by triggering my Purchase Orders from my sender service,it is showing the following error in moni:
"<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack> " in error section and in TRace its showing this error:
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="1" type="T">could not create BPE proxy for message, no XML object definition found for message 70126C4C0C4D0B11E1000000AC113034</Trace>
</Trace>
</Trace>
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
Please suggest how these can be resolved????

New Services Downloads Not Showing Up

I downloaded and installed (for all users) the the Internet Services package and I can't seem to get the services to become visible. For example, the "Lookup in Wikipedia" service does not show up in the services menu when I highlight text in Pages and open the services menu. I have:
1. Tried doing the same thing in TextEdit (with no success)
2. Tried restarting the computer.
3. Tried reinstalling the Internet Services and restarting the computer.
4. Tried repairing permissions on the disk
One thing that seems odd to me is that /Library/Services/ is blocked (the no-entry sign) to me in finder from my profile (non-administrator). Is this normal? Here are the permissions on it:
mycomputer:~ user$ ls -l /Library | grep 'Services'
drwxrwxr-x 6 root admin 204 23 Jun 08:47 PDF Services
drwx------ 14 administrator wheel 476 3 Sep 17:41 Services
Might this be the problem? (I don't want to change the permissions on this folder without knowing what those permissions are 'supposed' to be).

Thanks. I had the same problem. I checked the permissions on both the Automator and the Services folder and they were set to another user as the owner and wheel as the group. I used batchmod to change the permissions to match the rest of the folders in the /Library - root owner, group admin, users read and execute. I'm rusty on my unix so didn't go for the chmod because I forgot how.
As soon as they were repaired, my installed services finally showed up and other services started appearing. I even repaired permissions on my disk and it didn't pick it up.
It still seems really inconsistent where the services show up (menu, contextual, button on finder window) but at least I know it's sort of working now.

SelectOneChoice not showing all values from database

Hi!
I have to put a list of values in my select one choice. When I do the query in database, all the values are selected. But, with the same query on JPQL, the select on choice do not show all values in database. Anyone can help me, please?
P.S.: I am using SelectOneChoice with SelectItems, in JDeveloper 11g
Code:
<af:selectOneChoice id="selAction" value="#{row.idCmd}"
unselectedLabel="<Selecione>">
<af:forEach var="alertTypeNode"
items="#{bindings.actionFindAll.iteratorBinding.allRowsInRange}">
<af:selectItem value="#{alertTypeNode.dataProvider.idCmd}"
label="#{alertTypeNode.dataProvider.nmCmd}"
id="si1"/>
</af:forEach>
</af:selectOneChoice>

In your page binding check the rangesize setting for the executable you use - set it to -1.

Report similar to MC$4 that does not show absolute values

Hi all,
We need a report similar to Report similar to MC$4 which has the same drilldown capabilities but does not show absolute values, and instead shows the proper (actual) values.
Or if its possible to change something in the MC$4 report to show the actual values and not the absolute.
Thanks in advance!
George

HI
Your input criteria should contain all plant numbers and the period to be analyzed. Execute the report and then select: Plant Analysis\Export\Transfer to XXL\Deselect all options and tick Plant, Storage Location and Month. Follow the options to export to Excel. Report will be based on Plant, Storage location and Month.
Regards

ME23n , Does not shows the values correctly in print preview

Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandib

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

Filters not showing up values

Hi Gurus,
I am working on some reports in WAD.
I have characteristic "Region" which has 4 values like EAST,WEST,SOUTH,NORTH. This is a User Entry so I created a variable for this and it shows the values with check boxes beside it when you click on the variable entry screen input help. Once I execute the query the result is displayed. When I click on the Filter ICON on the Navigation Block for REGION it is not showing the Values for this region but just shows only 4 check boxes.
This Characteristic doesnot have master data. It is displaying the KEY values.
For the characteristics which Master Data it is showing the values both in Varaible selection screen and also in Filter Selections.
Please update me with a solution.
Thanks,
Raj

have you tried replacing it with the file essbase.bak_startup file, instead of the older essbase.sec file?
If you check your app folders you will still be able to see the cubes you had created its just that Essbase can't pull those up with the older .sec file.
The essbase.bak_startup file is always updated everytime the Essbase server is started up.
Be sure to take a backup of the file before starting up the server again.
The reason your essbase.sec and essbase.bak files are both corrupt is because when you first discovered that the essbase.sec file is corrupt it was when you started the server up.
What you need to keep in mind if the machine which holds the essbase server shuts down abruptly or crashes (which usually leads to the situation you are in) is to never start up the Essbase server right away, as you may have a corrupt essbase.sec file, and if you start up the server without taking a backup of the essbase.bak file you may risk corrupting the essbase.bak file as well.
This is because at start up the essbase.bak file gets replaced with the essbase.sec file.
let me know if this works.
Regards,
Anindyo

Using transactio code to execute a report does not show default value

Hi all ,
I have given a default value of a field on my selection-screen by initialization in a hr report .
I am using PNP database and default selction-screen in hr report category .
While the report is working fine while executing directly , It is not showing default value when executed through a transaction code .
Can any body tell why it is so ?
Thanks & regards
Sun

Did you create the transaction as a report transaction?
Rob

OBI columns not showing distinct values.

Hi,
Please help me out with the below issue.
I have a colulmn called Product Type. Same column is been pulled into many subject areas. In one of the subject area the column when checked for all product types, it is not showing distinct values, instead it displays multiple rows of sinlge value. Whereas in other subject areas it dsiplays distinct values.
So please help me out on this issue.
Thanks,
Rajesh S

Hi,
I don't think it's not an issue with not selecting "Select Distinct Value" checkbox .. because same column pulled into to other subject areas working fine. But here also sometimes it shows correct distinct value and sometimes all values(Duplicate values).
Thanks,
Rajesh.

PO not showing committment value

Hi All,
I am an FI consultant. We have a issue where PO is not showing committment value. Could you please sugget what can be the possible reason.
Regards
Deepak

Hi All,
further to add this:-
Our PO value is 815525 GBP & invoice value is 744707.52 GBP.
our PO qty is 1 & invoice qty is 3.
Please help.
Regards
Deepak

PO not showing commitment value

Hi All,
We have one issue where PO is not showing committment value. Could you please guide whether this can be becasue of any problem in WBS element or cost element.
Please suggest.
Reagrds
Deepak

Hi Deepak
1. Check if Commitment Management is active in Contr Area (OKKP)
2. Check if Commitment mngt is active in Project profile / WBS element
3. There is a program for Int Orders, RKANBU01 which updates missing commitments for Int Orders.. Its called RECONSTRUCT AVAILABILITY CONTROL
See if RKANBU01 or similar program is there for WBS also
Br, Ajay M

Query is not showing the values - authentication error

Hi,
After running a query it is not showing the values and showing <b>"You do not have the authorization for the selected component."</b>
Diagnosis
You do not have the authorization for the selected component.
System response
The selected component cannot be edited.
Procedure
lease speak to the person responsible for authorization, if you require authorization for the editing of this component. The function is protected by the object "Business Explorer - components" with the following fields:
InfoCube ZPLAYOPPT
Type of a component REP
Component PLAYBOOK_OPPT_1
Activity 16
Notification Number BRAIN 800
<b>Can u pls tell me the solution.</b>Thanks and Regards,
Giri.

Go to SU01, look at your authorization profile for which roles you are given. Then, go to PFCG and check out the roles and how they are defined. It is possible that you are not authorized to view application area, infocube, certain characteritics etc.
Hope this helps,
Regards,
Petter

Front End Service is not starting

Hi ,
Any one can help me to resolve this issue.
I have one enterprise edition front end server .if i try to start the front end service it give the following error
Server startup is being delayed because fabric pool manager is initializing.
Cause: This is normal when Pool is bootstrapped and indicates that the Front-End is waiting for a quorum of other Front-Ends to be started.
Resolution:
If this event recurs persistently, ensure that 85% of the Front-Ends configured for this Pool are up and running. For 2 or 3 machine Pools, initial cold-start of the Pool requires all machines to be started. If multiple Front-Ends have been recently decommissioned,
run Reset-CsPoolRegistrarState -ResetType QuorumLossRecovery to enable the Pool to recover from Quorum Loss and make progress.

If understand the problem Correctly You one Lync enterprise edition installed is that right?
If yes Please note For a recommended Lync Server 2013 EE pool deployment, there should be at least three Lync Server 2013 front-end servers in the EE pool.
http://technet.microsoft.com/en-us/library/gg412996.aspx
We recommend that all your Enterprise Edition Front End pools include at least three Front End Servers
Also refer Why 3 server pool?
http://social.technet.microsoft.com/Forums/lync/en-US/1e277415-01b0-4123-a5bc-260909368d5b/why-3-server-pool?forum=lyncdeploy
If you just want one Lync server please install Lync Standard Edition
Front End Pools with Two Front End Servers
We do not recommend deploying a Front End pool that contains only two Front End Servers. If you do ever need to deploy such a pool, follow these guidelines:
If one of the two Front End Servers goes down, you should try to bring the failed server back up as soon as you can. Similarly, if you need to upgrade one of the two servers, bring it back online as soon as the upgrade is finished.
If for some reason you need to bring both servers down at the same time, do the following when the downtime for the pool is finished:
The best practice is to restart both Front End Servers at the same time.
If the two servers cannot be restarted at the same time, you should bring them back up in the reverse order of the order they went down.
If you cannot bring them back up in that order, then use the following cmdlet before bringing the pool back up:.
Reset-CsPoolRegistrarState -ResetType QuorumLossRecovery -PoolFQDN <FQDN>
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer"
Regards Edwin Anthony Joseph

Service Registry : Services does not show under Service definitions..

Hi All,
I am new to PI ..
My PI system is 7.11 ..DB DB2
Query is that when i start PI tools and click on service registry under service definitions it does not show any services..
Do i have to publish services so that it can be accessed from the mentioned location..or is there any other configuration that i need to execute..
Regards
Sohal....

Hi Sohal,
You may want to refer to:
#1267817 - Configure Services Registry proxy (ServicesRegistrySi)
Also, check the following links that may aid you with that:
http://help.sap.com/saphelp_nwpi71/helpdata/en/46/94dd02c7b915ebe10000000a114a6b/frameset.htm
and
http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/cc8fd368c873dfe10000000a11466f/frameset.htm
Regards,
Caio Cagnani

SRM back end service PO not showing NAVS value in Item condition

Similar Messages

Maybe you are looking for