SRM EBP certification --- Please guide

Hi Friends,
I want to take the SRM EBP certification, Please guide me on the same.
Please send me the document " SAP BestPractices for SRM "  and other relevant documents needed for SAP SRM EBP certification with sample questions on the same.
My mailid:  [email protected]
Have a nice day,
Thanks & Regards
Ankur

Hi Jayasree,
Exam is quite simple when you are familliar with SRM210 Course.
Certification have test questions like:
1 Which of the following are true
a In Classic Scenario, PO to the vendor is always sent from the R/3
b In Classic Scenario, PO to the vendor is always sent from the SRM
c In Classic Scenario, PO to the vendor is always sent from both R/3
d In Classic scenarion, PO to the vendor can be sent via email
Total point marks = 100
Passing marks = 70
I recomend to read SAP BestPractices for SRM to complete Your knowledge to exam preparation.
If You want I can send You this document on email.
Regards,
Marcin Gajewski
Please reward points for helpful answer

Similar Messages

  • Sap srm ebp certification

    I believe that there is a list of questions that are asked during the srm ebp certification exam. There are 40 questions and the exam is of one hour duration. Can anybody send me the list of questions or likely questions that can be asked. I would appreciate if you could send those to me at [email protected]
    regards

    Dear Ravi,
    I am planning to do certification in SAP SRM, will it be possible for you to send me the required documents will really appreciate that and will be very thankful to you,
    Also if you have interveiw questions and will add to it that will be great. Please send it [email protected] address.
    Thanks in Advance,
    Mohan

  • Looking for SAP security certification - Please guide me !!!

    Hello,
    This is Harsha from Bangalore, India.
    I am currently working as a system administrator with CISCO System, Bangalore with an overall experience of 5 years.
    I am interested in taking the SAP security model. Please assist me regarding the same with guidance to a proper career path.

    Thats a very generic and vague question.
    But to sart with, get trained in SAP Security. You might even go for Certification if you have the time and money for that.  And then just float your Resume.
    pk

  • SAP Certification - Please guide

    Dear SAP Gurus,
    I have an exp of 9 years in HR, End user (SAP) as 4 years and I have gained (To some extent) techno-functional skills through exp. Is there any way towards progression in SAP as functional and Technical.
    I intend to shift towards Full time Tehcno-Functional SAP consultant. Is it a right time ? Also would like to know that, I am a commerce graduate and intend to do ABAP. What exactly needed to do an ABAP course. Where I can do the course (less course fee) in hyderabad.
    How much impact it will make if i do both Functional and ABAP with quality intervals.
    Kindly advice.
    Regards
    Arun

    Hi Arun,
    The HR experience that you are talking about will help you to understand client's business process and his requirements easily.
    The end user experience that you are talkin will help in understanding what is SAP and how SAP works.
    But for being a techno-functional consultant, you need to understand how SAP works in the backend.
    I mean about the database tables, views, ABAP syntax, logic etc. etc.
    And for being a confident functional consultant you should understand what is there in Standard SAP? How a requirement can be achieved or how standard SAP can be customized to meet client's requirement?
    Regards,
    Raj

  • Transfer RFQ from R/3 to SRM-EBP

    Hi,
    We are using SRM 5.5. I want to transfer RFQ from R/3 to SRM-EBP.
    Please suggest.
    Note: I have some idea.
    1. R/3 - I will create a Z Program
    2. In this program I will get the details of RFQ in R/3.
    3. I will create a RFC Function Module in SRM.
    4. In my R/3 program I will call SRM RFC Function Module.
    5. I will pass all the RFQ details into my SRM RFC Function Module.
    6. Now I have the RFQ details in SRM-EBP in that SRM RFC Function Module.
    7. In this SRM RFC Function Module I need to create a BID based on my R/3 RFQ details
    8. My doubt: what coding is required to create a BID in SRM-EBP.
       Because I can't use BDC to create BID in SRM-EBP.
    Regards,
    Natchiappan.M

    Hi,
    Thanks for your reply. But How can I pass the guid as a input for that function module.
    I tried that function module. If you have some sample code with this function module Please share with me.
    Thanks and Regards,
    Natchiappan.M

  • SRM (EBP - SRM210) Certification materials

    Hi,
    I am planning to take SRM (EBP - SRM210) Certification exam. Hence, I am looking for certification questions & answers and related materials. Those who would like to share these files, Please send them to me at [email protected]
    Thanks in advance
    Raja

    Hi Atul,
    Thanks for your information and config material.
    But, I could not find certification questions & answers which i am looking for.
    Can you help me out on this, if you can.
    with regards
    Raja

  • Please guide wether i do certification direct 10G or first 9i

    hi dear
    i ameet kumar and i have been working in the oracle field as oracle developer since 2years in the 9i and 10G.
    i want to do certification but i have not much knowledge about the certification point of view.
    What is certification code of oracle 10G developer track,syllabus and reference books.
    So someone experience my senior guide me how do i start up,way of preparation.
    i wait .
    Regards
    Ameet Kumar
    Oracle Developer

    user572632 wrote:
    Hi frns
    I am an OCA in Oracle 9i, (have cleared 1Z0-007 and 1Z0-031)....
    Please guide me in further career development ...
    I have interest in pl/sql....
    Will it be wise to go for Oracle Database 11g: Program with PL/SQL (1Z0-144) exam and become Oracle PL/SQL Developer Certified Associate as i did 1Z0-007 as part of OCA 9i earlier ?
    OR
    should i go for 1Z0-147 first and then 1Z0-044.....
    Which will be more beneficial for me ?
    Any other suggestion will be welcomed :)
    Thanks.You chose either to take 1z0-144 or 1z0-147 (but not both).
    From previous posts you will see that I consider studying for 1z0-144 (the more modern exam) to be far more beneficial than study for 1z0-147 )the older exam). The reason i the more modern exams are more focused on topics on what a candidate needs to know to do the job.

  • Integration Builder Configuration. SRM/EBP ---- XI ------ SRM/SUS

    Hi Masters of SRM.
    could you please show how make the configuration in XI into Builder configurations
    the scenario is SRM/ebp -
    > XI -
    > SRM/SUS
    any guide because I have the guide for the ERP----> XI -
    >SUS. but does not my requirement.
    the both systems are in same box but different client.
    thanks for yours atentions

    Thanks: Nichil.
    I  follow  your instructions.,  when I make simulation in Generation Log. show all lights in yellow color for example:
    Receiver Determination(s):
      | SRD_009 | PurchaseOrderRequest_Out | * | *
    Analysis
    Required sender communication component: | SRD_009 A receiver determination was found for the connection All receivers are contained in the receiver determination found
    Results
    The reused receiver determination is already assigned to the configuration scenario
    Notes
    Check the conditions for all receivers of the receiver determination. The default result value for the generated condition is: TRUE
    I am  message for test and I can see the message into PI the estatus is Recorded and flag is color Green.
    but no show an error or problems only stay  in Recorded Status , othe observation into the SXMB_MONI  the fiel Receiver component and Receiver Interface are empty,  
    what you suggets ?
    best regards.

  • SAP SRM 7 Certification

    Hi SAP Gurus,
    I would like to do SRM certification... can you mention of provide the list of material/books we need to refer...
    and do we have seperate certification for SRM 5 and SRM 7? Bcos i started my career from SRM 7...
    Please guide me on this...     <<Moderator: Email address is removed>>
    Thanks in advance
    Message was edited by: Ravi Sankar Venna

    Hello Sanjay,
    Please visit
    https://training.sap.com
    and check the curriculum based on your SAP Certification code, you should be able to find out the curriculum.
    Please note SAP Certification materials are copy-righted and not allowed to freely distribute them.
    Kind Regards,
    Ravi
    PS:
    Bcos (SMS / Mobile language is not allowed in SCN)
    Email addresses cannot be published as part of your postings. However, you can follow the user / mention the email address in your profile.

  • SRM 7 & SRM MDM installation & configuration guides required

    Hello,
    I urgently need to get my hands on SRM 7 & SRM MDM instal/config guides and release notes
    I currently donot have access to OSS.
    Can somebody please kindly email them to me on:
    Your help will be greatly appreciated.
    Thank you

    Hi
    Check out this link
    http://help.sap.com/saphelp_srm70/helpdata/en/74/344c430fab4d0bbc30996d56cc293a/frameset.htm
    Thanks
    Uday

  • SRM-EBP:  How to delete multiple entries in table BBP_DOCUMENT_TAB easier?

    We are running SRM 4.0 EBP on classic scenario.  I want to delete entries in table BBP_DOCUMENT_TAB easier and faster using FM BBP_DELETE_FROM_DOCUMENT_TAB.  Is there a standard program that calls this FM so that inputting the entries will be faster?  I see only CLEAN_REQREQ_UP but does not serve the purpose.  If none, how can I develop a program to achieve this?  Please help SRM Consultants.

    Hi,
    Please check note 535765, in it there is a special report that deletes entries from this table.
    I hope this helps,
    Kind Regards,
    Lisa

  • In Solution Manager, where can I find the SRM 7.0 Configuration Guide?

    Please give me directions on how to download the SRM 7.0 configuration guide within Solution Manager, these documents are not available on the service marketplace.  We have sol manager 4 I believe, it's not sol manger 7.0.
    Also, if you could send me the guide at matt.joseph at thq.com that would save me from losing more time trying to figure out Solution Manger
    Thanks for your help.
    Matt

    Matt,
    1. Log on to your SAP Solution Manager system.
    2. To be able to access configuration documentation, create a project as follows:
    1. Create your project with transaction SOLAR_PROJECT_ADMIN for project administration.
    2. Connect your SAP system to SAP Solution Manager with transaction SMSY for the SAP Solution Manager system landscape.
    3. Create a project structure and add the required scenarios for your SAP system to your project structure with the Business Blueprint transaction SOLAR01,
    4. Add your SAP system configuration structures to your project structure with the configuration transaction SOLAR02.
    3. Go to the project structure folder <project name> using transaction SOLAR02.
    4. Access configuration documentation for SAP NetWeaver usage types at Configuration StructureSAP NetWeaver 7.0.
    5. Access configuration documentation for all areas of SAP SRM at Configuration StructureSAP SRM <release>.
    Nesimi

  • Vendor Transfer from ECC to SRM-EBP

    I want to transfer vendor from ECC to SRM-EBP.I tried the T code BBPGETVD. But I am getting the below log:
    "Error: Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: 0000100011".
    Please suggest.

    Hi
    I have seen this error. However kindly check in SRM side
    In BP transaction 0000100011. Is this vendor is vailable or not.
    OR
    do some cosmetic change in this vendor in XK02 and when you run BBP_VENDOR_sync REPORT BRINGS you this vendor in SRM
    Muthu

  • Classic Scenarion with MM-SUS (SUS-ECC-SRM/EBP)

    Hi SRM Gurus,
    We are going for SRM Classic Scenario with MM-SUS . SRM 7.0 with ECC 6.0 (Ehp4).
    Here ECC will be connected to SRM and SUS ,i..e SUS-ECC-SRM.
    I learnt that Classic deployment supports MM-SUS scenario. It means that , every document created in ECC or SRM(EBP) need to replicate in other 2 systems. I have concerns about this replication in 2 another systems.
    1. PO-S/C in SRM , creates classic PO in ECC Is this PO sends to SUS ?
    2. Confirmation-Is Confirmation done in ECC/SUS/SRM replicates in another 2 systems ?
    3. Invoice-Is Invoice done in ECC/SUS/SRM replicates in another 2 systems ?
    Can anyone please confirm /suggest , whether this happens or not ?
    Regards
    NAP

    Narendra
    I learnt that Classic deployment supports MM-SUS scenario. It means that , every document created in ECC or SRM(EBP) need to replicate in other 2 systems. I have concerns about this replication in 2 another systems. - EVERY DOCUMENT IS NOT CREATED IN 2 OTHER SYSTEMS. SRM PO GOES TO ECC AS CLASSIC PO. THIS CLASSIC PO IS SENT TO SUS WHERE IT CREATES A SALES ORDER FOR VENDOR. SO ITS NOT REALLY EVERY DOCUMENT IN TWO OTHER SYSTEMS
    1. PO-S/C in SRM , creates classic PO in ECC Is this PO sends to SUS ? - ECC PO WILL BE SENT TO SUS. SRM-ECC INTERFACE REMAINS SAME HERE. THERE IS NO COMMUNICATION BETWEEN SRM AND SUS
    2. Confirmation-Is Confirmation done in ECC/SUS/SRM replicates in another 2 systems ? - CONFIRMATION CAN BE DONE EITHER IN SUS(RECOMMENDED), OR IN SRM, OR IN ECC. CONFIRMATION CREATED IN SRM AND SUS WILL RESULT IN CREATION OF GOODS MOVEMENT IN ECC. GOODS MOVEMENT CREATED IN ECC WILL BE ONLY UPDATED AS A  KIND OF FOLLOW ON DOCUMENT IN SUS AND SRM
    3. Invoice-Is Invoice done in ECC/SUS/SRM replicates in another 2 systems ? - INVOICECAN BE DONE EITHER IN SUS(RECOMMENDED), OR IN SRM, OR IN ECC. INVOICE CREATED IN SRM AND SUS WILL RESULT IN CREATION OF MM INVOICE IN ECC. INVOICE CREATED IN ECC WILL BE ONLY UPDATED AS A  KIND OF FOLLOW ON DOCUMENT IN SUS AND SRM
    I hope it clears your doubts....
    Regards
    virender Singh

  • SRM-EBP-WORKFLOW

    Hi ,
    Can you please tell where can i<b> get material document for SRM EBP WORKFLOW .</b>
    thanks in advance,
    Regards,
    Kannan.

    Pls. Go to following links
    http://help.sap.com/saphelp_erp2005/helpdata/en/index_srmaddon.htm
    http://help.sap.com/saphelp_srm30/helpdata/en/8b/4fa9585db211d2b404006094b92d37/content.htm
    https://websmp104.sap-ag.de/ibc
    Path :- Integrated Business Content> .... for mySAP SRM> Self-Service Procurement> Page 70
    Re: Work Flow error - Shopping cart
    Workflow problem
    regards
    Sanjay

Maybe you are looking for