SRM -ECC: CIN_Plan_Driven_Procurement_SupplierEnablement

Has anyone used this add on scenario for Plan driven procurement.
Please let us know how to use this. The scenario is a bit confusing.
Thanks and Regards,
Himadri

Hi
There are 4 points regarding replicaton of produt master. As it is mentioned above ,
1. if you are going to user directl procurement (Extended classic) scenario you need to replicate locations (Plant) & Product master into SRM.
2. In case if you are managing contracts in SRM and replicating to ECC (either srm 7.0 / 5.0 versions) then you need to replicate product master to SRM in order to create GOA / Central contractrs against a prodcut
3. If your implementation is decoupled scenario (Classic + Ext.classic), and you want to create reservations in ECC through SRM then you need to replicate products into SRM
4. Finally, when your implementation scenario is Classic then if you user SRM for stock procuremnent / reservations creations from SRM then you need to replicate product master to SRM.
Hope this will give you more clarity on your query.
Regards,
Krish
Edited by: Krish on Feb 1, 2012 9:27 AM

Similar Messages

SRM-ECC PO Business Content

We are implementing SRM -EXtended Classic Scenario.
The PO is created in SRM and a copy is sent back to ECC. Therefore PO is avialable in both the SRM & ECC systems to be pulled into BI. In BI we have serperate content available for Procurement Analysis in ECC(based on LO cockpit) and SRM area. (under 0SRM & 0SCM). The contents /data model look very different.
Any benefits/pitfalls in using either of the business content for SRM procurement reporting?
Any ideas anyone

Holger,
Can't you have the iView open up another browser, and within the new page/on lauched brower have the SRM iviews based on user role?
James

How do we replicate product categories from SRM/ECC in to SUS system

How do we replicate product categories from SRM/ECC in to SUS system in srm 7.0

Hi Gopal,
Are you confused between SUS & ROS? If you meant ROS, it is advised to create local product categories in ROS under COMM_HIERARCHY.
Let us know your exact requirements.
Regards,
Nikhil

Workflow Problem between SRM & ECC

Hi,
We are facing a typical scenario in the workflow for Purchase Requisition.
System:
1.     SAP ECC 6.0
2.     SAP SRM 5.0
Problem Description:
1.     In our landscape, ECC is connected to SRM portal for creation of PRs through SRM.
2.     For this the user logs into SRM system and creates a shopping cart. After creation of shopping cart, it goes for approval in SRM system.
3.     Once approved, BAPI 'BAPI_REQUISITION_CREATE' used at the SRM backend to create PRs in ECC.
4.     After this, the workflow gets triggered and a work item is being sent for approvals in ECC.
5.     There is an enhancement (ES_SAPLMEWQ) been done in the BAPI u2018BAPI_REQUISITION_CREATE' to trigger the workflow.
6.     We have used the standard function module u2018SAP_WAPI_CREATE_EVENTu2019.
7.     Now the problem is that, this is working fine in QAS and Dev systems. But it fails in PRD for some of the SRM triggered PRs.
8.     After our initial analysis, we observed that, for the PRs, it has failed to trigger workflow, the initiator had logged into SRM using FR language where as, those PRs whose initiator had logged into SRM portal using u2018ENu2019 language it had worked fine.

Recently I was facing a similar issue with SAP_WAPI_START_WORKFLOW function module where I did not maintain the container element name in the program with different language. I will request you to maintain the event container element name in France inside the program whefre you are calling the FM SAP_WAPI_CREATE_EVENT. Most probably you will be using Text Symbol that you need to maintain in French language.
Thanks
Arghadip

SRM-ECC org structure integration

Hi,
Can anyone suggest an RFC/BAPI to fetch SRM organisational structure in ECC.We do not have HR implemented and therefore there is no org strucuture in ECC but it does exist in SRM.
I have Z-table in ECC with fields sap id,manager id,Role(mgr,VP etc) to be filled from SRM.
Thanks in advance.

Hi Guys,
In addition to my message above, I'm adding the error below so that somebody can better understand the issue here.
Information on where terminated
 Termination occurred in the ABAP program "CL_BBP_ES_EMPLOYEE_MYS========CP" -
 in "IF_BBP_ES_EMPLOYEE~GET_RL_UNIT_IDS".
 The main program was "SAPLBBP_SC_UI_ITS ".
 In the source code you have the termination point in line 45
 of the (Include) program "CL_BBP_ES_EMPLOYEE_MYS========CM008".
 The termination is caused because exception "CX_BBP_ES_INTERNAL_ERROR" occurred
 in
 procedure "USER_DETAIL_GET" "(FORM)", but it was neither handled locally nor
 declared
 in the RAISING clause of its signature.
 The procedure is in program "SAPLBBP_SC_APP "; its source code begins in line
 6 of the (Include program "LBBP_SC_APPF35 ".
=========================================================
return parent org.-units of all paths
SORT lt_struc BY seqnr.
LOOP AT lt_struc REFERENCE INTO lr_struc WHERE otype = 'O'.
 IF lv_level IS INITIAL.
 lv_level = lr_struc->level.
 ELSEIF lv_level <> lr_struc->level.
 EXIT.
 ENDIF.
 ls_rl_unit-otype = lr_struc->otype.
 ls_rl_unit-objid = lr_struc->objid.
 ls_object-otype = lr_struc->otype.
 ls_object-objid = lr_struc->objid.
 CALL FUNCTION 'HR_OBJECTBUPA_GETBUPA'
 EXPORTING
 is_object = ls_object
 IMPORTING
 es_hrobjbupa = ls_rl_bupa
 EXCEPTIONS
 object_type_not_allowed = 1
 OTHERS = 2.
 IF sy-subrc <> 0
 OR ls_rl_bupa-bupaguid IS INITIAL.
 RAISE EXCEPTION TYPE cx_bbp_es_internal_error.
 ENDIF.
 ls_rl_unit-guid = ls_rl_bupa-bupaguid.
 APPEND ls_rl_unit TO rt_reportingline_unit.
ENDLOOP.
ENDMETHOD.
Thanks
Debashish

SRM - ECC Integration

Hi all,
We have 2 SRM systems : SRM 7.0 & 1 ECC system : ERP 6.0 (Ehp 4).
Is it possible for us to integrate these 2 SRM systems with 1 ECC in the backend?
If yes then what major settings will be required? If no what could be the reason?
Thanks,
Nikhil.

Nikhil,
Normally multiple backend systems are connected to one SRM system for centralizing procurement in SRM.
You should be able to connect multiple SRM systems to same backend. It would be similar to what you do for two SRM systems with one backend each. Since each SRM system will have different logical system, it should not be a problem.
I am curious on the business need for two SRM systems.
SG

Condition Type SRM - ECC

We have SRM 5.0, ECC 6.0.
I have created a new condition type (ZFTE) in SRM and ECC with the same name.
Is it possible to send condition type from SRM to ECC and fill condition tab of the PO in ECC?
I need detailed condition types in the PO of ECC
Regards

Hi
Please go through the links below ->
GOA : Mapping condition record between SRM and ECC
Transfer condition type from R/3 to SRM
Re: new condition type
Re: Condition types from SRM to backend
Hope this will help.
Do let me know.
Regards
- Atul

Classic Scenarion with MM-SUS (SUS-ECC-SRM/EBP)

Hi SRM Gurus,
We are going for SRM Classic Scenario with MM-SUS . SRM 7.0 with ECC 6.0 (Ehp4).
Here ECC will be connected to SRM and SUS ,i..e SUS-ECC-SRM.
I learnt that Classic deployment supports MM-SUS scenario. It means that , every document created in ECC or SRM(EBP) need to replicate in other 2 systems. I have concerns about this replication in 2 another systems.
1. PO-S/C in SRM , creates classic PO in ECC Is this PO sends to SUS ?
2. Confirmation-Is Confirmation done in ECC/SUS/SRM replicates in another 2 systems ?
3. Invoice-Is Invoice done in ECC/SUS/SRM replicates in another 2 systems ?
Can anyone please confirm /suggest , whether this happens or not ?
Regards
NAP

Narendra
I learnt that Classic deployment supports MM-SUS scenario. It means that , every document created in ECC or SRM(EBP) need to replicate in other 2 systems. I have concerns about this replication in 2 another systems. - EVERY DOCUMENT IS NOT CREATED IN 2 OTHER SYSTEMS. SRM PO GOES TO ECC AS CLASSIC PO. THIS CLASSIC PO IS SENT TO SUS WHERE IT CREATES A SALES ORDER FOR VENDOR. SO ITS NOT REALLY EVERY DOCUMENT IN TWO OTHER SYSTEMS
1. PO-S/C in SRM , creates classic PO in ECC Is this PO sends to SUS ? - ECC PO WILL BE SENT TO SUS. SRM-ECC INTERFACE REMAINS SAME HERE. THERE IS NO COMMUNICATION BETWEEN SRM AND SUS
2. Confirmation-Is Confirmation done in ECC/SUS/SRM replicates in another 2 systems ? - CONFIRMATION CAN BE DONE EITHER IN SUS(RECOMMENDED), OR IN SRM, OR IN ECC. CONFIRMATION CREATED IN SRM AND SUS WILL RESULT IN CREATION OF GOODS MOVEMENT IN ECC. GOODS MOVEMENT CREATED IN ECC WILL BE ONLY UPDATED AS A KIND OF FOLLOW ON DOCUMENT IN SUS AND SRM
3. Invoice-Is Invoice done in ECC/SUS/SRM replicates in another 2 systems ? - INVOICECAN BE DONE EITHER IN SUS(RECOMMENDED), OR IN SRM, OR IN ECC. INVOICE CREATED IN SRM AND SUS WILL RESULT IN CREATION OF MM INVOICE IN ECC. INVOICE CREATED IN ECC WILL BE ONLY UPDATED AS A KIND OF FOLLOW ON DOCUMENT IN SUS AND SRM
I hope it clears your doubts....
Regards
virender Singh

Can SRM 5.0, ECC 6.0, Netweaver 2004S upgrade to SAP Basis 7.1/kernel 710?

Hi guys,
For IPv6 support, based on note 1346768,
===================================
o You use AS ABAP with a SAP Kernel 7.10 and at least patch level
150 or a SAP Kernel of Version 7.11 or 7.20.
====================================
How can the SRM/ECC/Netweaver products use IPv6? As far as I know, version 7.1 has not been released for these products yet. Can we upgrade the SAP Basis support pack only to 7.1?
Thanks!

Hi,
You already gave yourself the answer : "version 7.1 has not been released for these products yet".
So it means that IPV6 support is not yet possible for SRM 5.0 and ECC 6.0.
You have to wait for SAP and most probably you will have to do a full upgrade of the product and not only of Netweaver.
Regards,
Olivier

External requirement from non SAP system created in SRM 7.0 Extended Classi

Hello SRM Gurus:
Has anyone created an external requirement using XI ExternalRequirement_Create_In (http://sap.com/xi/EBP). We are getting a E001 "No company code could be determined for backend for product##". I traced the error to FM 'BAPI_SCEC_CREATE' in class "CL_BBPX_EXTERNAL_REQUIREMENT". What I found is that it check the attributes for BUK and updates a table with the backend EEC system. Then it checks if any of the entries match our external non SAP system in our external requirement and since it is a non SAP system none do. Then it sets a return error code.
I configured our non SAP system in the SLD and in SPRO under "Define System Landscape" as a non SAP system.
We are running external classic scenario. We just want to created a shopping cart from an external non SAP system. Source the shopping cart in SRM and create the PO in SRM/ECC. We are not using a product master but creating "describe requirement" in our external system. Our product categories are replicated from ECC and the same codes used in our external non SAP planning system.
If I change the external planning system to the ECC backend system, the external requirement is created in SRM but when I source it and convert it to a PO, it returns a backend error that the external requirement number does not exist in ECC. Therefore it appears all of our data from our external system is correct with the exception of how to deternine the backend company code
According to SAP this should be possible using XI.
Has anyone been successful doing this or can you please advise any OSS notes or documentation explaining how to do this. Please advise if you need additikonal info.
Thanks in advance.
Bert

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Overwriting Conditions data during Material Replication from R/3 to SRM.

Hi,
 When creating a new info record and then running the material replication program everything looks OK. However, if for the same material you create a new info record or change the existing info record and then run the material replication, some of the previous data is removed.
 We implemented BADI(PRODUCT_CUSTOMER2) to read info records from R/3. When i debug BADI all the info record and condition info is populated. Once the control leaves the BADI standard SAP code is not inserting/updating delta condition records. It is only populating latest info record.
 SRM 4.0
 Support pack level : 11
 BADI Name: PRODUCT_CUSTOMER2
 Method Name: MAP_R3_TO_CRM_MATERIAL
 Conditions Populated in structure : COMT_PROD_SERVICE_BDOC- CONDITIONS-CND_BBP_WORKING_SET.
Thanks in Advance,
Vineela.

Hi
Please go through this ->
Note 715213 Interface change in BAdIs in Release SRM 4.0
Note 689135 Conditions are not downloaded when product is updated in R/3
Note 534899 - Inconsistencies in the Content Workbench
Note 420343 - TIP: Backend price transfer in product conditions
Note 459640 - Category error when transferring backend prices with report
Note 415839 - Removing errors in external product interface
For pricing condition type, go to the SAP Help links
http://help.sap.com/saphelp_srm30/helpdata/en/72/f40f3c98ddaa4ce10000000a11402f/content.htm
and also
http://help.sap.com/saphelp_srm30/helpdata/en/ee/d9df3bbcce4b37e10000000a114084/content.htm
Do you use IPC for pricing? I am not sure whether you can use R/3 4.6C with SRM5.5. Check your systems. Refer SAP notes 539720 if you are using simplified pricing (Classic scenario).
Also check for SAP OSS Notes - 394975 and 420343
Update of price in srm is possible through the SAP OSS Note 420343. This note describes an option to transfer a price from the Backend via a report and a BADI and to store this price in the condition table of the corresponding product in the EBP. But you have to do small changes,i think this note will certainly helps you to transfer material master prices to srm product master automatically.
Update Price in SRM 5.5 Automatically using report - EBP_GET_BACKEND_PRICES
Re: Update Price in SRM 5.5 Automatically using report EBP_GET_BACKEND_PRICES
Condition Type SRM - ECC
Re: Condition Type SRM - ECC
Re: Replicating additional fields (R/3 4.7) to SRM product master
Transfer Inforecord Conditions Scales to SRM Product Master
Hope this will help.
Regards
- Atul

Error in SMQ2 - SRM Server

Hi,
I have done basic config steps in SRM & ECC as per SRM Config guide.
When i checked in SMQ2 in SRM system, for Queue - R3AI_DNL_CUST_PROD1, status is in SYSFAIL, on double clicking,i am getting the error as *Immport of material type into hierarchy TEST not p ossible (note 432339)
Message no. SR053*
Can anybody help me to resolve this issue ?
Regds,
CB

Hi,
In transaction COMM_PRAPPLCAT, you specify that the hierarchy specified in the error message is to be used for application 'Purchasing' (02). This means that the material groups would be created in this hierarchy. Delete this setting in Transaction COMM_PRAPPLCAT. If hierarchy R3MATCLASS already exists, assign hierarchy R3MATCLASS to application 'Purchasing'. Then the material groups are created in hierarchy R3MATCLASS.
If you want to import the material groups into the hierarchy specified in the error message, you can also keep this hierarchy assigned to application 'Purchasing' and deactivate the error message. Error message "Import of material types into hierarchy &1 not possible". You can do this in Customizing under 'Customer Relationship Management -> Master data -> Basic settings -> Define system message characteristics'.
Regards,
Nikhil

How do I create a new shopping cart in the SRM system (not portal)

Hi,
I'm working on a test landscape with Purchase request WF. I want to create a new shopping cart from the SAP system, not from the portal, and this purchase request should go to a manager approval.
I've been told that I need a SRM system.
Could you please tell me what the transaction for creating new shopping cart is? Could you also explain me what to do with this transaction or point to a doc I can learn from?
Thanks

it is called planned driven procurement scenario in SRM
ECC box
1. create a Purchase request
2. Approve the Purchase request
3. now check EPRTRANS table . you might have Purchase request number ( if you have already set up done in ECC system for Plan driven procurement)
4. Run BBP_EXTREQ_TRANSFER job
SRM Box..
5. Now you can see your shopping cart for this purchase request (External requirement) in the sourcing cockpit.
Muthu

PI: configuration for PO and Contracts creation on ECC

Dear Gurues,
My client is working with classic scenario with plan driven procurement on SRM 7 EHP1 and ECC 6 EHP5.
From ECC EHP4 or higher landscape, classic PO will be created in the backend, from SRM only via XML. For this, PI system should be configured and SRM system connections and the SRM & ECC business systems have to be mentioned in the PI system. So the use of PI is mandatory.
Can you explain me which configuration shoudl I have to perform in SRM-ECC and PI?
Thanks in advance.
Martí

I do not think anything is mandatory regarding the order. You can go ahead with PI 7.1 first and then EHP4 on ECC. But the otherway should also not be a problem.
VJ

IDOCS for GOA not generated in ECC.

Hi Friends,
In our development systm we have configured the GOA functionality. Now we have moved to Quality system.
I have maintained all the partner profiles and distribution model as required in std settings and similar to the development system and checked all the connection. It all seems to be fine in both SRM & ECC systems. Also identical number doc types & ranges exists in the 2 systems.
But when I release a GOA from SRM I do not find any trace. Following are the symptoms.
SRM - RZ20 - No Error.
SRM SLG1 - No error.
ECC - RZ20 - No Error.
ECC - SLG1 - No error.
SRM - SWi1 workflow task is completed.
GOA status - Released - In Distribution.
In ECC contract is not created.
In WE02 /ECC there is NO node for BLAORD & COND_A under the Inbound Idocs.
What can be the possible issue under these circumstances. Please suggest how can I trace the error.
Thanks in Advance
Hussain Wagh

Remote Logon is working fine both ways.
About distribution model what I did is create a message type in SRM for BLAREL. Then I created a message type in ECC for BLAORD + COND_A. I generated partner profiles and then tried to distribute it so that it creates a similar model in SRM too. While doing this I got error that view for BLAREL already exists in destination (SRM side).
So I deleted the BLAREL model view in SRM and then tried again to distribute from ECC. Only then it created a message types in SRM too. I.e I created the complete distribution model in ECC side and distributed to SRM.
Is my method correct.
Regards
Hussain

SRM -ECC: CIN_Plan_Driven_Procurement_SupplierEnablement

Similar Messages

Maybe you are looking for