SRM Installation steps

Hi All,
Please give idea about SRM EBP 4.0 with Server 5.0 Installation steps to enable XI Integration ready. Provide high level sequnce of requirements to get an idea.
Thank you very much in advance,
Rama

Hi Rama,
You talk of two aspects jointly.
Installation is Basis activity for which you need to refer Installation Guides.
XI integration for respective scenarios of SRM can be found in respective business scenario config guides
Both these can be found on :
service.sap.com/ibc
(sent you the config guide for PDP SI which talks about XI integration for that scenario, If you are implementing other scenario you need to refer res config guide)
BR
Dinesh

Similar Messages

SRM Installation Error - Start Java engine

Hello gurus,
OS platform -- Windows Server 2008 (R2) Stantard X64
DataBase - MS SQL Server 2008 (R2) X64
System - SAP SRM 7.0 / NW7.01
Iu00B4m facing with an error during a SRM Installation of AS JAVA system (with plus EP & EP Core). I installed last week the ABAP system.
The error is in the phase 25 - Start Java engine. I checked the sapinst.log and sapinst_dev.log and both show the following error:
INFO 2011-05-17 12:35:13.073
Disconnect from message server (SRVSIAPP01/3902) succeeded.
WARNING[E] 2011-05-17 12:35:13.160
CJS-30150 Java processes of instance JRM/JC01 [Java: UNKNOWN] did not reach state PARTRUNNING after 20:30 minutes. Giving up.
ERROR 2011-05-17 12:35:14.42
FCO-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|6|0|startJava was executed with status ERROR .
I also checked others log files, like as start<SID>.log and dev_jcontrol:
running D:\usr\sap\JRM\SYS\exe\uc\NTAMD64\sapstart.exe name=JRM nr=01 SAPDIAHOST=SRVSIAPP01 -wait
SAPSTART finished successfully on SRVSIAPP01_JRM_01, but at least one process doesn't run correctly:
D:\usr\sap\JRM\SYS\exe\uc\NTAMD64\sapstart.exe=>sapparam(1c): No Profile used.
trc file: "D:\usr\sap\JRM\JC01\work\dev_jcontrol", trc level: 1, release: "701"
node name   : jcontrol
pid         : 1436
system name : JRM
system nr. : 01
started at : Tue May 17 12:14:55 2011
arguments       :
       arg[00] : D:\usr\sap\JRM\JC01\exe\jcontrol.EXE
       arg[01] : pf=D:\usr\sap\JRM\SYS\profile\JRM_JC01_SRVSIAPP01
[Thr 1544] Tue May 17 12:14:55 2011
[Thr 1544] *** ERROR => OS release Windows NT 6.1 7601 Service Pack 1 2x AMD64 Level 6 (Mod 15 Step 11) is not supported with this startup framework (701) [jstartxx.c   4389]
This last file (dev_jcontrol) is kindly weird... I checked the PAM and it said this OS (Windows 2008 (R2) is supported!
Can you help me to solve this problem?
Kind regards,
Jou00E3o Dimas - Portugal

Hello Rajneesh,
I read that note 1152240 and tell me in which way this apply to my case, because I only see for my case... the part that say "Installing SAP systems based on SAP Netweaver 7.0 EHP1 (7.01) or SAP Netweaver 7.0 EHP1 SR1" and in there is recommended to:
. Patch your runtime libraries as described in SAP note 684106 --> I already did this when I installed the ABAP system/part
. Apply the latest DBSL patch --> I did a kernel upgrade to the latest version and also the DBSL patch on ABAP system/part
So... I don't see anything related with my case... the Java part that is what I´m trying to install and now I´m with an error!
Best regards,
João Dimas - Portugal

SRM Installation Guide

Hi all,
Here i am installing the standard objects like cubes, dso's,queries etc....... of all modules like SD,MM,PP,FI,CO and QM....
i am installing the above standard objects of all modules through using this link
http://help.sap.com/bp_biv170/
so here i am able to get step by step procedure of all modules installations.
i want to install the SRM Module too....
where can i found that installation steps ....
can anybody suggest the link or path to install the SRM Module....standard objects...
Thanks in Advance...

Hi,
Pls chk this links;
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
http://help.sap.com/saphelp_nw04/helpdata/en/3a/7aeb3cad744026e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bb/66073c52619459e10000000a114084/frameset.htm
Also check http://service.sap.com/bi -> business content -> supplier relationship management and http://service.sap.com/srm
Regards
CSM Reddy

Internal BW inside the SRM installation

Hello All,
I'm trying to figure out why SAP has installed a BW inside the SRM system.
I have succeeded in replicating data sources into this internal BW but I have failed in installing the business content.
It seems like there is no business content.
Our basis guy told me that in the SRM installation, there is no special BI_CONT component like in a regular BW installation.
What am I missing here ?
Any clarifications and explanations will be highly appreciated.
Thanks in advance, Amir.

Ey Guys whats up...
I'll use the same BW BC version as you, the basis guy already installed, the bw guy activated, loads, etc..
Now its my turn, and thus I have this question:
- Is there any Business Package for BW-SRM reports ? (In order to see them in SAP EP).
Or
- What is the SRM standard way to show to the endusers these reports ?
Thank you ! =)
Regards,
Diego

Best Practices for SRM Installation !!

Hi
can someone share the best Practices for SRM Installation ?
What is the typical timeframe to install SRM on development server and as well as on the Production server ?
Appericiate the responses
Thanks,
Arvind

Hi
I don't know whether this will help you.
See these links as well.
<b>http://help.sap.com/bp_epv170/EP_US/HTML/Portals_intro.htm
http://help.sap.com/bp_scmv150/index.htm
http://help.sap.com/bp_biv170/index.htm
http://help.sap.com/bp_crmv250/CRM_DE/index.htm</b>
Hope this will help.
Please reward suitable points.
Regards
- Atul

Prerequisites of SRM Installation ?

Hi All,
We are planning for a SRM 5.0 SR1 Installation, I just want to know Do I need to installa NW04s before I start with SRM installation ? If yes what is the process of setting up the SRM system ?
Can anyone please let me know about this.
Regards,
Srikar

Hi Jose,
Thanks for the update. I am really confused now after going through the Master Guide, what all required to setup a SRM system ? Please some simple brief on the required installations would be really helpful for me to start.
Your help is appreciated and rewarded.
Regards,
Srikar

Oracle EBS 11.5.10.2 Installation Steps

Although this is by no means exhaustive or the most accurate, all contributions and/or corrections are welcome
As I attempt to reply the numerous calls and emails I have been getting, firstly sorry guys, I have been settling down at a new job, and haven’t had time to locate my implementation notes, however find below the steps I followed with a successful result.
Installing Oracle E-Business (EBS) Release 11i (version 11.5.10.2)
Linux Installation – SLES 9 Rel 1
•     Please follow these instructions – I could not have written a better set of instructions :
http://www.novell.com/coolsolutions/feature/16009.html
NOTE: Although this is written for SLES 9.1, I believe this will work for any Linux variant.
Also, make sure you have installed openmotif 2.0 or higher to make sure the forms server starts and remains running
Windows 2003 Server SP 1
Environment:
Windows 2003 Server was installed as an environment on VMWare Server (The free one).
Hardware Spec:
P4 800 Mhz CPU
2GB (Physical RAM) and 1GB (Virtual RAM)
250 GB (Physical HDD), 120GB (Virtual HDD)
DVD RW
DECLARE
At this point I have to say a few things:
1.     I have not attempted installing on any other version of Windows, so if you try with another version, I may not be able to answer your questions, although I believe it should not be any different.
2.     I would believe you can or have access to the internet and can download or find most of the resources needed.
3.     I would assume you have installed the Windows 2003 Server with SP 1, Internet Explorer and Outlook. Also, have included an IP address, a server name with its domain extensions in the host file.
4.     I would assume that you have created one group – dba , two users applmgr and oracle and included them in the dba and administrator groups
5.     I would assume that you are at least familiar with the terms and usage of abbreviations in this sort of environments.
6.     I would also assume you have reviewed and have made allowance to meet the required specification in terms of hardware (I did not attempt an installation on the USB HDD, so may not be able to help, if this applies to your situation)
BEGIN
     Prepare Environment
Download and have read the following software:
1.     Java Development Kit 1.3 (or higher version)
http://java.sun.com/downloads/index.html
2.     Active Perl – This is needed for the staging script adautostg.pl http://www.activestate.com/store/productdetail.aspx?prdGuid=81fbce82-6bd5-49bc-a915-08d58c2648ca
3.      Visual C++ - This is needed for many of the real-time code compilation
http://msdn.microsoft.com/vstudio/express/visualc/download/
4.      CYGWIN
http://www.cywin.com/setup.exe     (Free open source, never expires!)
OR
MKS Toolkit (Evaluation copy, 30 Trial or get a licence for about $500)
http://www.mkssoftware.com/eval/
This is necessary for certain unix-only available utilities required to implement/compile Oracle E-business Suite, such as which, make, cc, etc.
5.     The DVDs or downloaded zipped copy of the entire Oracle E-Business Suite software for Windows 32-Bit ( I did not attempt on a 64-Bit processor, though I believe it should not be different, but see the necessary documentation if that is your situation)
http://edelivery.oracle.com
6.     Jinitiator – This is required to run the forms on your system (Although a first attempt to view any of the form interfaces downloads and requests this be installed first) http://www.oracle.com/technology/software/htdocs/devlic.html?url=http://otn.oracle.com/software/products/developer/htdocs/jinit.htm
NOTE:
•     DO NOT Install into the default directories and do not allow spaces in file directories/path when installing the software, somehow experience has shown that the Oracle EBS does not handle spaces in file directories well, and results in untold hardship if ignored. E.g Default installation folder for an software installation may suggest C:\Program Files\ JDK 1.5, MAKE SURE you alter this to something like C:\JDK15. DO THIS FOR ALL SOFTWARE INSTALLED
•     After each software installation, please reboot the system before installing the next piece.
•     Make sure that all the paths to the bin folders for all software installed is included in the environment variables, and verify by typing path in the command prompt to display all paths listed
•     If using CYGWIN (like I did, as I could not afford a software expiring on me nor could afford $500 for a test). You may choose all the modules available, but you do not need all (it will be an overkill to have the entire unix utilities and libraries on your windows box, unless you plan on learning unix commands or into heavy development requiring a unix environment, without wanting a unix machine) MAKE SURE you choose all the library options, all the development options and that should be OK. Then confirm after the installation by typing which, cc (or gcc), make(gnumake), ls, gawk(awk), grep (egrep) (IMPORTANT:Where one of the other in brackets exists, copy and rename the copy as the alternative). As a double sure – copy all of these into C:\Bin directory.
•     If the Oracle EBS is downloaded, unzip all the files into the folder and ignore any suggestions that it will over-write other files such as the component.label files
Installation Proper
•     Run adautostg.pl – which you will find in the StartCD i.e the first file downloaded and unzipped. This will attempt to rearrange the installation files in the order in which the installation wizard – rapidwiz prefers and identifies the folders. (Saves you hand-holding the wizard by having to interact during the installation, pointing it to the relevant folders/files if not run) to create the staging area.
•     Run Rapidwiz – either by double clicking the rapidwiz.cmd in the startcd folder (this would be the one in the staging area) or from the command prompt
•     As required, point rapidwiz, to the bin folder of cygwin e.g C:\cygwin\bin (if this is as installed) in the place where it requires the MKS Toolkit
•     Pre-installation Checks – rapidwiz intelligently tests all the necessary software and requirements before installation starts. A corresponding message to each parameter suggests the opinion of the rapidwiz whilst a green tick indicates the parameter is sufficient, other indicators may need reviewing. Please make sure you resolve each issue before progressing with the installation. This may lead to a waste of time if not resolved.
•     Choose a single-node installation
(if just testing or practicing, you may also choose a multi-node if this is what you want.)
•     If all the modules are not needed (I installed all), you may have to choose which modules you require, and state where you want the modules installed.
•     Assuming all parameters are passed and installation begins, the different stages of the installation steps can be followed by the on-screen messages or log file reviews (each logfile directory will be displayed on the screen during the installation of each context).
•     Post Installation Checks – Rapidwiz does some checks after an installation, whether successful or not, and provides a report. When an installation is successful. It confirms and provides the url to login. The default username and password for the system administrator is usually sysadmin / sysadmin. You are encouraged to create another user immediately.
For all who asked, depending on how far up your hardware scales in terms of specifications, the installation may take about 3 hours (at least mine did) or more.
Login on to Oracle EBS !
The URL required for logging on to the OAM (Oracle Application Management - For the Apps DBAs) and OEBS (Oracle E-Business Suite - essentially for the Functional Implemeters/Consultants ) - The entire gamut (They are shown as hyperlinks), should be as follows;
http://hostname(servername.domainname.com):8000/
where hostname is the same as specified in your host file e.g servername.domainname.com or .whatever-u-like
and
8000 - is the default port, but you may have chosen your own port and that should be used in such a case.
N.B - The Forms server is often started when an attempt is made to access such an interface after login in to the OEBS. However, in my own case, it did not until I made sure openmotif 2.1 was installed on my SuSE Linux Enterprise Server 9.1. The windows installation started without any issues.
If all attempts fails….
You may have to try and try again by deleting all installation files and starting all the installation steps again. It will help if you know how to edit your registry settings to delete all reference to oracle e-business (not all reference to oracle though, as some odbc-related entries have been installed by Microsoft and require your registry settings to function)
Alternatively, send me your box, your mailing address and a token (money of course, and I may be able to set it all up for you) – JOKING!
CAVEAT: I will not be held responsible if anything unsavoury happens to your system in the course of you following the steps I have highlighted above either correctly or incorrectly. However, if you are successful, please sing my praises all over the forum and ask that I be rewarded by Oracle!
Olu

Hi
If anyone need the document to "How to install Oracle Applications 11i on Windows 2003" i can forward the document with screen shots with detailed steps.
Reg
Dwaraka

Jumping an installation step on WAS 6.40 installation

Hello dear colleagues . I am installing the Database Instance of a WAS 6.40 with Oracle, but instead of a Standard Installation I used the option to copy the database from another system (this will be my quality system and I am copying the production database). On the post installation steps the installer runs a script called run_control.sql that tries to create the controlfiles , but I would like to jump this step as I have already created this controlfiles when I made the SID change of the database.
I am trying to modify the keydb.xml file on my installation directory , the section where checks if this run_controlfile is ok (actually it is marked [ERROR] and I change it for [OK]) , but the installer overrides my changes . How could I force this change? Is this keydb.xml the file that controls the installation steps or it is a different file?
Thanks in Advance for your help
Jose Luis Valverde
Spain

Hello
I already found the answer, I post it here in case anyone needs to use it.
To jump a step on the installation of a WAS 6.40 you have to stop the sapinst and launch it again with this parameter:
/sapinst SAPINST_SKIP_ERRORSTEP=true
But be advised that doing this could make you loose the sap support on the installation

Error in the post installation steps of SLD .

Hi
We are working on EP7.0 2004s.We are using local sld.Right now I am doing the post installation steps for SLD.I added the J2EE and UME roles.In the next step I went into the administration tab of SLD for configuring.It is throwing this error.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
This is detailed exception I got.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:516)
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:462)
at com.sap.sld.wd.main.wdp.InternalMainInterfaceView.wdFirePlugToOldUI(InternalMainInterfaceView.java:154)
at com.sap.sld.wd.main.Head.onActionAdministration(Head.java:277)
at com.sap.sld.wd.main.wdp.InternalHead.wdInvokeEventHandler(InternalHead.java:227)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please help me.
Thanx & Regards,
Naresh

Hi Naresh,
Can you let me know the service pack for the portal.
Also try login in using administrator using the http://<localhost><port>/sld
thanks
Pankaj

Post installation steps for SAP PI, scenarios for SAP ERP 6.0 EhP 3.0 BAIO

Hi!
I installed SAP NetWeaver 2004S with PI component.
I also have a demo SAP ERP 6.0 EhP 3.0 BAIO system with several clients:
(100: demo client, 200: BW, 300: demo client (copy of 100)).
Questions:
what are the post installation steps to configure SAP PI?
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
Thank you very much indeed!
regards
Holger

Hi Holger:
what are the post installation steps to configure SAP PI?
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
I recommend you to use proxys in your landscape as you want to interchange messages between
different clients in the same system.
Hope this helps you.
Carlos

Webdynpro error in Post installation steps of SLD

Hi
We are working on EP7.0 2004s.We are using local sld.Right now I am doing the post installation steps for SLD.I added the J2EE and UME roles.In the next step I went into the administration tab of SLD for configuring.It is throwing this error.
<b>com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!</b>
This is detailed exception I got.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:516)
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:462)
at com.sap.sld.wd.main.wdp.InternalMainInterfaceView.wdFirePlugToOldUI(InternalMainInterfaceView.java:154)
at com.sap.sld.wd.main.Head.onActionAdministration(Head.java:277)
at com.sap.sld.wd.main.wdp.InternalHead.wdInvokeEventHandler(InternalHead.java:227)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please help me.
Thanx & Regards,
Naresh

Hey Aviad,
Yes I did, in my case I've installed PDK SP 9 over SP2 which is prohibited. If this is your case as well do the following:
1) From the Undeployment tab of the SDM select the com.sap.pct.pdk..
components.
2) Using the Archive remover tool which can be accessed from
System Administration > Support > Portal Runtime > Administration
Console > Archive Remover --> Remove the portal applications with prefixcom.sap.pct.pdk...
3) Navigate to Content Administration > Portal content > Content
Provided by SAP > Platform Add-Ons > Developer Content
and remove all the contents below this folder.
4) Restart the server
After this you can deploy the SP9 business package using the SDM.
Hope it helps,
Roy

POST Installation steps for SAP XI 7.0 SP06

Hi Experts ,
We are trying to install XI 7.0 SP06.We are suppose to carry out post installation
steps but we are not able to locate a proper post installation guide for the same.
We have succesfully installed XI 3.0 earlier .However XI 7.0 post installation steps in the guide that we have "SAP NetWeaver 2004s SR1 ABAP+Java on Windows: Oracle" , are relatively less...
Nevertheless, we have carried out the following steps
5.21.1 Performing PI-Specific Steps for SLD Configuration
Local and Central System Landscape Directory (SLD)
Mapping Security Role to User
1. Log on to the Visual Administrator of the J2EE engine of the SLD host.
2. Choose Cluster® Server® Services® Security Provider.
3. In the Runtime tab, choose Policy Configurations and then the column Components, and select the component
sap.com/com.sap.lcr*sld.
4. Switch to the Security Roles tab to display the assigned roles.
5. Select role LcrInstanceWriterLD.
The user SLDAPIUSER already exists with its security role LcrInstanceWriterLD.
6. Switch to edit mode and add user PIAPPLUSER with the same role LcrInstanceWriterLD.
Note
For a central SLD, the user PIAPPLUSER must be created in the central SLD ABAP system first and be
assigned to ABAP role SAP_XI_APPL_SERV_USER. The password must be same as in the XI Exchange
Profile on the XI Integration Server.
Note
For information on the UME actions, see the Post-Installation Guide - SLD of SAP NetWeaver 2004s, section
Configuring SLD Security, at service.sap.com/sld® Media Library.
Maintaining SLD Connection Parameters (ABAP API)
1. Log on to the SAP XI Integration Server System as user DDIC and call transaction SLDAPICUST. The screen
Maintain SLD Access Data is displayed.
2. Choose Display <-> Change and proceed as follows:
a) Replace the existing SLDAPIUSER with PIAPPLUSER user.
Note
For a central SLD, make sure you use the user with security role LcrInstanceWriterLD.
b) Make sure your entry is marked as Primary.
Note
Only the entry marked as Primary is active.
c) Save your settings.
April 10, 2006 PUBLIC 97
Now we don't know wether the sld configuration is over or not ...or for that matter in RWB we see only J2se based adapter engine and not J2ee based adapter engine...
Kindly help

Hi..
Instaed doing this,please try out template based configuration which has been mentioned in the installation guide or else do as follows
1.Login into NWA (netweaver administrator)
as
http://<host.<domain>.<com>:<port>/nwa
2.Use J2ee_admin user id and password
3.go to deploy and change
4.select template based configuration for PI
5.execute the template
6.install it
you can find the list of other templates which are clear and easy to do the post installation step..i found it useful ..
Apart from these, as per sandro, you can check the data transfer in visual administrator or go the abap engine, transaction RZ70, press accept proposal button
then execute button , check the data supply without any error
Thanks
Gopal
(Avoid points if useful)

Post installation Steps for SAP XI

Hi,
I am doing post installation steps for SAP_XI, for the step "Generating roles for SAP_XI and SAP_SLD in transaction PFCG, when I enter Role: "SAP_XI*" then its not generating any roles it is giving message "No roles found in the selected area" Please suggest
Thanks,
Nishant

Create user in SAP XI and then assign them role
Create user using SU01 transaction. Enter the username and click on the first button (create).
Follow the process below
1. Address Tab
Enter the user details
2. Logon Data Tab
Enter the initial password. Make sure user type is Dialog (it is by default).
3. Roles Tab
SAP_XI_DEVELOPER
SAP_SLD_DEVELOPER
SAP_XI_MONITOR
(if the user is admin give the admin roles)
Before logging on to the Integration Builder, logon to ABAP stack (SAPGUI frontend on windows or java) at least once. Then logon to Int.Builder components.
regards
Dharamveer

NW PI Post Installation steps

Hello All,
I have installed a dual stack PI system and performing post installation steps for PI AS Java. In configuration tasks After completing NetWeaver initial setup with skipped steps I was progressing to next step to configure NW PI - AS ABAP in All Configuration Tasks-->NW PI - AS ABAP (Basic Configuration for Idoc, Proxy Maintain) but I couldn't find this option.
I have updated system, patches, cim etc still I couldnt find the above option, Please advise where I went wrong.
Thanks
Sam

Hi,
What is the pi version?
The steps differs from version to version . Like 7.1 and 7.3 are not exactly same. Can you check in the installation guide for the pi specific post steps for your version .
Regards,
Amit.

XI Post installation steps

Hi,
I'm trying to get XI going at a project. The basis guys have installed the server but I have an idea none of the 'post installation steps' have been completed.
The symptoms are that when I start the Integration Builder (SXMB_IFR) the Windows 'File Explorer' is started and not IE. The Integration Web page is not displayed.
I quickly looked at the Configuration guide and I see none of the RFC destinations mentioned in the guide.
Is this the reason for the problem ?. I need to know exactly what totell the basis people to look at. They have never done an XI installation before so I'm almost sure they have not done these configuration steps.
Thanks
Andre

Hi Andre,
They should look at the intallation/configuration guides that SAP provides. These guides can be found at the service.sap.com and/or help.sap.com
In a nutshell you have to make sure they have configured:
SLD settings, these involves configuring RFC destinations, Maintain the SLD parameters in SLDAPICUST.
Register, Starting up the queues. Configure the role of the integration server in trx SXMB_ADM or SXMB_ADMIN.
Hope this helps.
Cheers,
Roberto
Message was edited by: Roberto Viana

SRM Installation steps

Similar Messages

Maybe you are looking for