SRM-MDM Catalog latest version and SRM 6.0

Hi MDM Users,
could anybody tell me when will be released SRM-MDM Catalog 2.0? As I know, latest version is 1.0 Patch03.
Do you have any information about release of SRM 6.0?
Thanks and regards,
Álmos
Message was edited by:
Álmos Paksi

Hi Álmos,
The SRM-MDM Catalog will be releases on July 2nd 2007.
This catalog version will also be part of SRM 6.0.
Best Regards,
Daniela Schweizer
SRM Solution Management

Similar Messages

SRM MDM Catalog - Transfer Contracts from SRM - XI - MDM

Hi,
We are implementing SRM MDM Catalog1.0 with SRM 5.0 & ECC 6.0.
We have already configured XI content for MDM Catalog.
We have also done the basic settings for transferring contracts from srm to XI (including Backend System & Check box in Contracts for transfer to catalog).
But when i run the report SRMMDM_CTR_TRANSFER, the log tells me that contracts transfer has been initialized, but I cant see any XML message in SXMB_MONI
Can someone pls help and tell me why is that happening??
Thanks in advance.
Regards,
Jasmeet

Hi Mausam,
yes we have a SRM system from which we want are going to be sending Contracts, Prod Id's, Product Categories, Suppliers List etc from SRM to MDM using XI.
We have the Pre delivered content for XI from which we have set up the Interfaces etc.
This mapping between SRM-XI-MDM works pretty fine if i try to send Products or suppliers from SRM. I can see the IDOCs being generated. But when i run the report for Contracts, I cant see any IDOC in SXMB_MONI in SRM which is my source system.
So hence my question..... Is there some other way by which Contracts are transferred and if so then how and where can I see it.
Regards,
Jasmeet

Error deploying .sca files of SRM MDM Catalog 2.0 in SRM system

Hi All,
I'm trying to deploy the SRMMDM20SP02_2_BP_SRM_MDM.sca in SRM system but i'm getting the following error while deploying it.
08/03/04 16:05:22 - Start deploying ...
08/03/04 16:05:22 - EAR file uploaded to server for 16ms.
08/03/04 16:05:22 - ERROR: Not deployed. Deploy Service returned ERROR:
                     java.rmi.RemoteException: Error occurred while deploying ear file ./temp/deploy/work/deploying/srm_mdmcat_bp_webappr.ear.
                     Reason: None of the available containers recognized the components of application sap.com/srmmdmcatbp~webappr; it is not possible to make deploy.
                          at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:570)
                          at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
                          at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:312)
                          at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
                          at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
                          at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
                          at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
                          at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                          at java.security.AccessController.doPrivileged(Native Method)
                          at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
                          at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
                     For detailed information see the log file of the Deploy Service.
08/03/04 16:05:22 - ***********************************************************
Mar 4, 2008 4:05:22 PM   Info: End of log messages of the target system.
Mar 4, 2008 4:05:22 PM   Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
I tried deploying using SDM and JSPM. Either way i'm getting the same error. Can anyone tell me what is going wrong and what is the container it is requesting???
Thanks in advance.
Regards,
Seema

Hi Tejas,
Thank You for ur response.
I am deploying on SRM server with WAS 7.0 so I guess that is not the reason. If you can notice in the error it is trying to find some container which it is not able to find. Do you have any hint what this container is??
Also i would like to know what is the content of the SRMMDM20SP02_2_BP_SRM_MDM.sca. Does it gives us a UI like the Configuration UI?? If so can u please send me the link via which i can access it coz i didn't find any such link in the documents.
Thanks and Regards,
Seema.

Doubts on SRM MDM Catalog

Hi xprerts,
Few doubts on SRM MDM Catalog...
1. I am running SRM MDM Catalog 1.0 and when i launch the http://localhost:50100/webdynpro/dispatcher/sap.com/tc~mdmsrmui/MDM_SRM_UI_App (Webdynpro UI) am not getting the password field only server with no password is working here.
What should be done to have this password field?
2. I have deployed SRM MDM Catalog 1.0 webdynpro content and SRM MDM Java API on WAS 7.0 and i am using MDM Server as sp5 with SRM MDM Catalog repository .Will it work or not?
Awaiting ur response
Regards,
Vijay

Hi Vijay,
Are you sure you have the latest patch for SRM-MDM? I am at SRM-MDM Catalog 1.0 SP01 Patch00 Hotfix02, and I now have the server password field displayed in Config UI (wasn't there in early versions).
As for your second question, I guess you will have to be more specific. Or better wait until you set everything up, and run a test from Shopping Cart. Then revert with problems, if any.
Cheers,
Serguei

Setting up SRM-MDM catalog 2.0 in PI 7.0

Hi guys,
Iu2019m configuring the scenario for SRM-MDM catalog 2.0 and in the IR when I open the configuration scenario SRM_MDM_Catalog I get the following error:
u201CSoftware component version with GUID 44345e20-149b-11da-ab19-eb7a0a114c15 does not existu201D
I went to a demo system and I found that this GUID belongs to the SWC SRM SERVER 6.0. So, it means this object SRM_MDM_Catalog from SWC SRM-MDM catalog is referencing some object in the SWC SAP SRM SERVER 6.0.. However, we are not working with SRM 6.0 but with 5.5 releases.
I also went to service marketplace and I didnu2019t find the package for SWC SAP SRM SERVER 6.0.
Without this SWC I canu2019t skip this error!! Anyone has faced this issue before? How can I get the PI content for SAP SRM SERVER 6.0.?
Thanks in advance,
Ricardo.

I fixed by myself.
It seems the XI content "SAP SRM SERVER 6.00" is not yet available for customers, but a SAP friend sent me the content. Now the problem it's fixed.
Regards,
Ricardo.

Decimal places in SRM-MDM Catalog 3.0

Hi experts,
Iu2019m using SRM-MDM Catalog 3.0 and Iu2019ve an issue related to the decimal places configuration.
Our products are defined with 2 decimal places and after importing the records I can see them in Data Manager with the correct price information. However, when I access my catalog in EP, I can see all my records but without any decimal places. For instance, if I define a price 1.25 Eur for one product, in EP I have 1 Eur.
Can someone help me? Itu2019s really important that we can show the product correct price.
Thanks in advance.
Best regards,
Andreia Nascimento

Hi,
My problem was in MDM Data Manager - currencies table. If you choose currencies table, select your currency and check if there are any decimal places defined.
You can also check in MDM Console price table u2013 amount u2013 decimal places.
BR,
Andreia Nascimento

SRM MDM catalog with Negative contract price

Hi SRM / MDM Gurus,
I am facing a problem, when transferring contract data from SRM MDM catalog 3.0 to SRM 7.0 shopping cart process.
Scenario:
We have a u201Cnegativeu201D contract Price in MDM and the same I can able to see in the SRM MDM catalog. When trying to add that contract item to shopping cart the price is always positive. For example the SRM MDM catalog contract price is -100.00, when trying to add that item to shopping cart it is always 100.00.
Is there any configuration or OSS to resolve this issue?
Kindly also let me know is it possible pass negative value to shopping cart?
Kindly let me know your comments.
Thanks.
Regards,
Magesh Basavaraj.

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

SRM-MDM Catalog Repository

Hi MDM developpers,
I would like to know if SAP deliver or have a plan to deliver a standard SRM-MDM repository?
Kind regards,
Aklilu

Hi Akilu,
Since the availability of the SRM-MDM Catalog (September 2006) a SRM specific repository is delivered already.
Best Regards,
Daniela

What is use of Hyperlinks and Pdfs in srm-mdm catalog??

Hello friends,
I have added one Pdf file in data manager, in this, it is showing no thumbnail. But in EBP it is not showing any Pdf file. can suggest how to show this Pdf loaded file in EBP(Enterprise Buyer Professional). i dont know whats the purpose and how to use hyperlinks in srm-mdm catalog. Also why there is MIME types and Hyperlinks type look up tables in srm-mdm catalog repository. how to use them?
Please do suggest........
Regards,
Mandy

Hi Mandy,
You can do this:
On the MDM Console, right click on the Repository -> Properties -> PDF -> Allow invalid PDFs -> Yes .
Alternatively,
You can also find some information about it on https://service.sap.com/srm within this link on the left frame go into
mySAP Supplier Relationship Mgmt --> mySAP SRM in Detail --> SRM 5.0 --> Catalog Content Management --> SRM-MDM Catalog and you will get the document.
Hope it helped.
Regards,
Krutarth

SRM-MDM-Catalog and XI using HTTP

I need to do a integration between SRM 5 and SRM-MDM-Catalog using XI.
I imported the SRM-MDM-Catalog packages into the XI and I saw that all connections with MDM are using FTP in the comunnication channel template.
Is it possible to do connections for MDM using http or soap?

As far as I know using Files is how XI interacts with MDM. All scenarios I have seen on SDN have been with File adapter being used on MDM 's side.
Maybe there is a way , am watching this thread as well.
Regards
Bhavesh

SRM-MDM-Catalog and XI

I need to do a integration between SRM 5 and SRM-MDM-Catalog using XI.
I imported the SRM-MDM-Catalog packages into the XI and I saw that all connections with MDM are using FTP in the comunnication channel template.
Is it possible to do connections for MDM using http or soap?

As far as I know using Files is how XI interacts with MDM. All scenarios I have seen on SDN have been with File adapter being used on MDM 's side.
Maybe there is a way , am watching this thread as well.
Regards
Bhavesh

SRM-MDM Catalog Installation/Landscape

Hi,
We are currently having the following landscape in place with regards to the SRM, MDM and SRM-MDM Catalog :
Server 1 : SRM 5.0 Running   (HP-UX)
Server 2:   Enterprise Portal running with MDM Content and SRM-MDM Catalog JAVA components (HP-UX)
Server 3:   Standard MDM Server installation (Windows 2K)
We have configured everything according to the notes and guides (including the guide from Sudhendu Pandey), but when we try to configure the Search UI in Webdynrpo, the java components cannot connect to the MDM host and we are getting just the connection failed error.
My questions are :
1)   Can we run with the above landscape or is it necessary to have the SRM-MDM Catalog Java components installed on the same server as MDM.
2)   Do we have problems with versioning of the MDM server and the SRM-MDM java components ? We already replaced the MDM_JAVA_API with the correct one, but I do not have a newer version of the other api.
3)   Do I need to configure anything on the MDM server to get this running ?
Thanks in advance for your help
Regards
Raymond

Hi Foh,
Apologies for my late reply, but I was travelling. Thanks for this tip. We were using the latest versions for the MDM Portal Content, but the API for the SRM-MDM catalog was different.
I have updated this API with the latest version (Patch 3 HF 1) and now I can logon to the MDM server and I see the MDM Repositories. However if I now try to logon to one of the repositories he gives me the same error that the Login has Failed. The user that I am using is the default one coming with the SRM-MDM repository (Admin).
Regards
Raymond

Installation of SRM MDM Catalog

Hi SAP Mentors,
We are installing SRM MDM Catalog. I needed some clarification regarding the same. The version for SRM MDM Catalog is 7.02. Do I need a SRM 7.02 server with MDM 7.1 installed on it , on which I will be putting SRM MDM Catalog?
Please let me know as we need to start installation Monday. The docs are not very clear.
Thanks,
Asad

Zafar,
Yes. You need to have same release including the patch level. We experienced similar scenario and resolved all issues only after syncing the release and SP level.
hope it helps.
Regards,
Srinivas K.

Error replicating customizing data to the repository (SRM MDM Catalog)

Hi Folks,
I am currently configuring SRM MDM catalog, and one of the initial steps is to replicate data from SRM to the repository.
After defining repositories and FTP servers, I am running step "start extraction".
Well, the result page prompts me for errors in the 3 different files it is trying to replicate:
Report Statistics
Size of document 33.979 Bytes
Number of records :
Currencies 195
cd /
250 CWD command successful.
cd "/SRM_MDM_Catalog/Inbound/SSD_120/LT_Currencies/Ready/"
250 CWD command successful.
Error while executing ftp command put Currencies_554_SSD120.xml
The otehr 2 errors are the of the same type, just of different XML file.
When I look at the log files in the port structure directory, I find the following messages:
<?xml version="1.0" encoding="utf-8"?>
<?xml-stylesheet type="text/xsl" href="MDM_Log.xsl"?>
<MDM_Log version="1.0" path="F:\usr\sap\SCD\MDIS06\exe\MDIS_Temp\MDIS_TASK1_20091223211459.xml"
>
 <Open ts-long="21:14:59 GMT, Wednesday, December 23, 2009" ts="2009/12/23 21:14:59.998 GMT" pid="3304" host="z001idsd118" compile-type="WIN64_RELEASE">
 <Version ts="2009/12/23 21:14:59.998 GMT" tid="9044" entry-no="0"><Server>7.1.01.78</Server><Build>Built on 2009-May-09</Build></Version>
 <Trace ts="2009/12/23 21:15:00.108 GMT" tid="9044" entry-no="1">[MDS=z001idsd118 Repository=SRM_MDM_Catalog ClientSystem=SRM Port=LT_Currencies]: Chunk size/parallel[50000/5]: Import Task Started.</Trace>
 <Trace ts="2009/12/23 21:15:02.092 GMT" tid="9044" entry-no="2">Repository Load [SRM_MDM_Catalog]: 2003.483844 milli-seconds.</Trace>
 <Trace ts="2009/12/23 21:15:02.092 GMT" tid="9044" entry-no="3">Source file(s) retrieval + Repository Load: 2159.024536 milli-seconds.<LF/>-- Currencies_554_SSD120.xml</Trace>
 <Trace ts="2009/12/23 21:15:03.999 GMT" tid="3852" entry-no="4">xStructuralTransformer: Thread started.</Trace>
 <Trace ts="2009/12/23 21:15:03.999 GMT" tid="8392" entry-no="5">xValueTransformer: Thread started.</Trace>
 <Trace ts="2009/12/23 21:15:03.999 GMT" tid="9048" entry-no="6">xImporter: Thread started.</Trace>
 <Trace ts="2009/12/23 21:15:05.092 GMT" tid="6288" entry-no="7">xXmlSaxParser: Thread started.</Trace>
 <Error ts="2009/12/23 21:15:05.202 GMT" tid="6288" entry-no="8">Fatal Error at file Currencies_554_SSD120.xml, line 1, char 1, Message: Invalid document structure RC: 0xfffffffa - Invalid external data</Error>
 <Trace ts="2009/12/23 21:15:05.217 GMT" tid="6288" entry-no="9">xXmlSaxParser: Thread finished; Start -> End: 0.000000000 milli-seconds.</Trace>
 <Trace ts="2009/12/23 21:15:05.295 GMT" tid="8392" entry-no="10">xValueTransformer: : Start -> End: 0.000000000 milli-seconds.</Trace>
 <Trace ts="2009/12/23 21:15:05.295 GMT" tid="8392" entry-no="11">xValueTransformer: Thread signalled to stop: RC = 0xffffff</Trace>
 <Trace ts="2009/12/23 21:15:05.295 GMT" tid="9048" entry-no="12">xImporter: : Start -> End: 0.000000000 milli-seconds.</Trace>
 <Trace ts="2009/12/23 21:15:05.295 GMT" tid="9048" entry-no="13">xImporter: Thread signalled to stop: RC = 0xffffff</Trace>
 <Trace ts="2009/12/23 21:15:05.295 GMT" tid="3852" entry-no="14">xStructuralTransformer: : Start -> End: 0.000000000 milli-seconds.</Trace>
 <Trace ts="2009/12/23 21:15:05.295 GMT" tid="3852" entry-no="15">xStructuralTransformer: Thread signalled to stop: RC = 0x0</Trace>
 <Trace ts="2009/12/23 21:15:06.108 GMT" tid="9044" entry-no="16">[MDS=z001idsd118 Repository=SRM_MDM_Catalog ClientSystem=SRM Port=LT_Currencies]: Chunk size/parallel[50000/5]: Import Task Finished.</Trace>
 </Open>
</MDM_Log>
What am I missing?
thanks a lot a happy holidays!

Hello Priti,
For accessing the catalog, you have to define the external webservice with the config parameters in SRM System under transaction "SPRO"
Please refer the SRM-MDM Catalog configuration guide.
Hope this will help you.
TNR,
Saurabh...

SRM MDM Catalog (Subscreen Error)

Hi,
I am facing an issue with the SRM MDM catalog.
We are currently implementing SRM-MDM catalog 1.0 SP1 Patch01 HF1.
Our MDM server version is MDM 5.5 SP5 Patch02 HF1.
The steps while creating a Shopping Cart are as follows:
- Log into SRM Shopping Screen.
- Select the SRM MDM Catalog
- Inside the SRM MDM catalog select an item and click on the shopping basket to add the item to the shopping cart.
- Once I click on the shopping basket we are getting the below error
Error when processing your request
What has happened?
The URL http://mb1es1001.idcsap.com:8000/sap/bc/gui/sap/its/bbpsc01/ was not called due to an error.
Note
The following error text was processed in the system SR6 : Subscreen not found
The error occurred on the application server MB1ES1001_SR6_00 and in the work process 1 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLBBP_SC_UI_ITS
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SR6 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server MB1ES1001_SR6_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server MB1ES1001_SR6_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 001 -u: RAJ -l: E -s: SR6 -i: MB1ES1001_SR6_00 -w: 1 -d: 20070912 -t: 143649 -v: ABORT_MESSAGE_STATE -e: Subscreen not found
If any have any idea about this error, please help me resolve it. Full points will be awarded.

Hi
Check the SAP Note 967088 and download the configuration guide from SAP official website (SAP Marketplace - OSS Login required). Did you raised any message with SAP as well on this yet. If not, please do the same for faster processing of your query.
Please check what all error logs appear in SLG1 and RZ10 and RZ20 transactions in this case.
Which SRM/CCM/MDM versions, support packs are you using ?
FYI, Catalog names are case sensitive.
OCI parameter should be like this.
0 http://<J2EEhost.domain>:<J2EEport>/SRM-MDM/SRM_MDM
10 username User1
20 password <blank>
30 server <MDM Server>
40 port <Repositiry port>
50 catalog <Repository name>
60 uilanguage SY-LANGU
70 datalanguage SY-LANGU
80 mask <blank>
90 named search <blank>
User name and password mainatined in MDM console is case sensitive.I would suggest you to follow this step
1.In MDM Console for User1 enter password as user1(note that password is all small case)
2.Ensure that you enter the password in similar manner in defining OCI.
Please try the following OSS Notes & links below ->
OSS Note 895183
947362
938495
Note 871302 - Unable to switch between catalogs using F4 help
Note 890967 - /CCM/CHECK_TREX shows incorrect document content
Note 946185 - CCM20: /CCM/CHECK_TREX modifications
Note 707781 - Product search does not find all documents
Note 481295 - Short dump RAISE_EXCEPTION when expanding a product node
Note 723688 BBP TREX corrections for SRM 4.0 SP01
Note 778688 TREX_INDEX_MANAGER unit test update_view(): incorrect search
Note 930788 - Search help for catalog does not display all catalogs
Note 1028343 Changes in the repository not reflected in Catalog UI
Note 1015201 - SRM-MDM Catalog 1.0 Patch02 Release Note
Note 487917 BADI implementation f. BBP_CATALOG_CONTENT (Troubleshooting)
Note 877131 Product category is not permitted for the user
Note 623067 SRM 2.0 Integrated Catalog does not display catalog info
Re: ITS Template not found
SRM MDM Catalog --Login error
Do let me know.
Regards
- Atul

SRM-MDM Catalog latest version and SRM 6.0

Similar Messages

Maybe you are looking for