SRM MDM Catalog -Service Item

Hi guys,
We got a standard SRM MDM catalog implementation with OCI configuration handling all the item mapping.
I run into issues when I flag an item as a "Service Item" in MDM by using the default provided flag MDMSRM_SERVICE_ITEM.
This flag, when set to the true value of X, passes an item to EBP as a Service item as it should.
However, once this flag is set for an item and the corresponding OCI mapping is done, all other items (i.e. items that have the flag with a false value) in the MDM repository get transferred to EBP as Service items as well.
So, in other words, once the the MDMSRM_SERVICE_ITEM is mapped in OCI, it flags all MDM items as Service items irrespective of the flag value.
Any help is deeply appreciated.
Thanks folks.

Hi Anshuman,
We had a same issue. Just you need to set the other value="FALSE".
Open the MDM Console, select the SRM-MDM repository, Select the main table and navigate to the field Service Item. You will find this field is of type Boolean with True value = "X" and False value = " ". Set the False value = "FALSE" and Default value = FALSE.
Now check whether the items present in Data Manager has FALSE for service item field by default and then run the scenario it should work fine.
Kindly update us...
Regards,
Jitesh Talreja

Similar Messages

  • Unable to add Item to Shopping Cart in SRM-MDM Catalog

    Hi Guys,
    I am using SRM-MDM Catalog 3.0, MDM 7.1 and SRM 7.0. I have done all the configurations in SRM as well as in Portal like External Web Service creation, Assigning Catalog in Organisational Plan, UI Config and OCI mapping.
    I am able to see catalog on SRM-MDM web dynpro UI; however I am not able to select any item in the Catalog (the Checkbox is grayed out) and also I am not able to change the Quantity of any Item (by default it is 1). The Action column is also blank for all the items.
    In the Catalog, both Select and Quantity Columns are in disabled mode. I am not able to edit their values.
    I have tried all options in UI Config but no luck. Request you to please suggest if something needs to be done with the Config or I need to apply some SAP note.
    Regards,
    Varun

    Hi Shiv,
    Kindly refer below link and see the images.
    http://wiki.sdn.sap.com/wiki/pages/viewpageattachments.action?pageId=189597716
    Hope this helps!
    Regards,
    Viaks

  • Service hierarchy for SRM-MDM catalogi scenario

    Hello,
    We tried setting up the 'new' SRM-MDM service hierarchy catalogi. I've looked over some sdn threads already and read the SAP help http://help.sap.com/saphelp_srm70/helpdata/en/6b/7fb967f6cd4df0a5a9d5dec7e4aa72/frameset.htm. Both told me the service hierarchy should work in the SRM 'bidding/RFx' scenario. Since service hierarchy should work for RFx we continued trying setting it up but ran into the following problem:
    Up on opening our service hierarchy catalogi it returns the following message 'Table is empty' and does not show us any items(mss hierarchy is enabled in the SRM-MDM UI configuration for this catalogi). If we change thé UI setting to 'products' the items do show-up in a 'flat' manner (without hierarchy).
    - We've set up grouping in the SRM-MDM catalogi for these items
    - We've set up an entry in the MSS hierarchy lookup table and assigned this entry some of the catalogi items
    - We've not setup any MSS Hierarchy price
    - We've setup the item types, the outline item is of type 'MSS header' the subtypes are of type 'Free Text' and the MSS hierarchy entry is of type 'MSS header' aswell.
    - we've setup the hierarchy manually with testdata via the important manager (no pi/ix).
    Could anybody confirm service hierarchy works in the RFx scenario (mss hierarchy enabled)? Is there something we've missed or are forgetting? Any other pointters are greatly appreciated.
    Kind regards,
    Tim

    Hello Masa,
    We have not loaded our service hierarchy catalogi items from ECC nor SRM. We've manually set-up test-date via the import manager and data manager tools. This, as long as you set it up correctly, should still work in my oppinion?
    For the UI configuration the service (mss) is enabled causing the 'empty table' line to show up. If we would change it to 'product' the items would show but in a flat manner.
    Do you have any other pointers . F.e. what the item types should be (subitems: free-text and header: mss-header) and what the role of the mss-hierachy and mss-pricing table are and what we should do with those?  We've configured grouping (main item, component item, substitute item ..) to enable hierarchy is this correct?
    Ps. What does 'MSS' stand for, what does it mean?
    Kind regards,
    Tim

  • MDM Server Password Parameter in SRM Web Service for SRM MDM Catalog 2.0

    Hi Experts,
    We have password set on our MDM server. I am little confused about how to define MDM server password parameter in external Web service Call structure in SRM System for SRM MDM Catalog 2.0.
    Will Catalog webservice work, if we don;t define password for MDM server in webservice??if No, then please let me know how to define MDM server password in SRM websevice.
    Any help will be highly appreciated.
    Thanks,
    Shiv

    Hi Shiv,
       The MDM Server password is needed when you are changing Webdynpro UI Configuration.
      For catalogs, all you need is the repository userid/password parameters in the call structutre.
    SG

  • Inactive Catalog item still display in SRM - MDM catalog

    HI,
    I have one new issue in SRM-MDM catalogs.
    For Catalog Item there is one field called 'status' having value Active and Inactive and I change the status to Inactive for one of the Catalog item in Data manager but when i access the same in SRM - MDM catalog from Shopping cart, the Catalog item still display there.
    Does anyone guide me.
    Smriti

    Hi experts,
    I'm facing the same issue...
    I check the NAMEDSEARCH parameter used in the Catalog definition in SPRO and in some cases we have data in this field and in other cases we haven't. Is this a problem?
    Thanks for your help
    Regards,
    FS

  • ECC TO SRM-MDM CATALOG THROUGH SAP PI

    We have a scenario where we are sending data from ECC to SRM-MDM Catalog through SAP PI and data is coming from ECC through proxy and sending to SRM u2013MDM catlog through file adapter. In ESR part we have used SAP defined standard service interfaces (CatalogueUpdateNotification as sender interface and MDMInfoRecordDataTransmission as a receiver interface). The mapping used is also standard one.
    Now we have got requirement to send the data for vendor mat no, manufacturer field of info records from ECC to SRM-MDM catlog.  But we are unable to find out these two fields in standard interfaces/messages. Can anybody guide us how to add these fields in the current data types or is there any other standard interfaces we can use.
    Thanks in advance.

    Hi Shiv,
    Many thanks for your reply.
    Since we're not using XI / PI scenario and this is an upgrade from SRM 5.5 to SRM 7, Iu2019m using the same approach that was already used in SRM 5.5 with CCM 2.0.
    The idea is that the catalogue and all the records maintained need to be associated to a contract. So, I add the contract ID and the correspondent contract item in the import file, in addition to the supplier name, product ID, price information and so on. I mapped the contract ID with the field contract price.
    In relation to the price information fields, as I want it to be visible for any user that accesses the product catalogue, I tried different approaches:
    1.Using OCI Price information u2013 amount, currency, price base quantity and price base quantity UoM;
    2.Using OCI Price contract u2013 amount, currency, price base quantity and price base quantity UoM;
    The first approach didnu2019t work very well, as I was not able to see price information when accessing the catalogue. I could only see it once I transfer the items to the SC. In addition, this approach had one problem. The products were displayed but it was not possible to select the items one by one. To do that I needed to select all the items of the catalogue and after that the detail of the contract ID was displayed in every item, allowing me to choose the items that I want to select to my SC.
    The second approach was better as the information was visible when accessing the SC and I was able to select all the items, one by one, as it should be. The main problem of this approach was that Iu2019m getting errors in the SC when the materials have stock u2013 u201CInterface data contains errorsu201D. Or alternatively, if the items didnu2019t have stock, the SC was possible, but when I tried to create a PO from that SC, It simply does not work.
    So, can someone help me? Any ideas?
    Thanks in advance.
    Best regards,
    Andreia

  • Is use of flat file in SRM-MDM catalog search UI possible ?

    Hello,
    When user looks for materials inside SRM-MDM catalog (using search user interface), search is done manually with free form or drill down search.
    Then, among the search result, user has to select items he wants to add to his shopping cart and finally transfer those items from his shopping cart overview inside SRM.
    Is it possible to automate this user selection using for exemple a flat file uploading (or any other way you could know) ?
    This flat file will have material number (or service), supplier code and quantity (no more information).
    The aim of the request is to help requester to not have to select each item one by one (in the search result) knowing that :
    -  SC will have more than a hundred items,
    - delivery time and price (for example) must be checked in MDM, being the master data reference
    - materials (or service) to order are received by requester via a flat file without any information about prices, so i cannot upload my flat file directly into SRM because file missing data must come from MDM.
    With this process, user should have only to transfer items automatically selected.
    Could you please share your advises ?
    We use SAP MDM 5.5.
    Regards.
    Laurent.

    Hello Masa,
    Masayuki Sekihara wrote:
    A vendor look at buyer stock information like VMI and fill stock weekly base. So the vendor sends material number and quantity information as flat file to buyer. Buyer should create SC from flat file and price information should fetch from catalog.
    Yes, your are correct: example you gave corresponds to process for my SC uploading.
    Regards.
    Laurent.

  • Pictures not appearing in after upgrade to SRM-MDM Catalog 3.0 SP7 Patch4

    Hello,
    Due to some issues in Advanced search we performed the service pack upgrade from SRM-MDM Catalog 3.0 SP5 (with MDM 7.1.03.72) to SRM-MDM Catalog 3.0 SP7 Patch4 ( MDM 7.1.04.146).  With this new SP, the Pictures are not appearing anymore under the Hyperlink section anwhere in Catalog browser( Compare, Context view, Item details). With earlier SP pictures were appearing perfectly.
    We have done like this:( refer earlier thread - Re: SRM MDM Catalog 3.0 Image display) thanks Sudhanshu, Jitesh and Mandeep for suggesting that solution!
    Using the hyperlink field
    type : rendered
    MIME type : image type i.e. .jpg
    URL : web URL
    We had gone for this option because we dont want to store impages in MDM, and this worked perfoectly until new SP upgrade.
    Any clues?
    Thanks
    Pravin

    Hi Bala,
    Nothing appears under the Hyperlink section in Catalog browser, though a valid link exists in Data Manager under Hyperlink  as type-Rendered, MIME type as JPG and a valid URL.
    I have searched Service Market place for this fix of this issue and found that SAP has improved the technology ( from Object Cache to Blob Cache) to display pictures/hyperlinks from SRM-MDM Catalog 3.0 SP06 and MDM 7.1SP04 onwards. We were  on SRM-MDM Catalog 3.0 SP05 and MDM 7.1 SP03 before Dev upgrade.
    Here are the notes for reference of others who get into same issue.
    Note 1450593 - Implementation of BlobCache
    This note states "MDM7.1 SP04 offers new image caching functionality called Blob Cache. The old functionality of Object Cache is replaced with the Blocb Cache mechanism in Catalog 3.0 SP06 P1"
    Note 1505796 - Images not showing in SRM-MDM catalog (error in BlobCache)
    This note talks about the issue in MDM API with Blob Cache. The Fix has been provided in SRM-MDM Catalog SP08 Patch 01.
    But upgrade is not something that happens on the drop of a hat, we dont want to do another upgrade,  I would like to know if there is a workaround.
    Thanks
    Pravin

  • SRM MDM CATALOG VER10

    Hi All,
    There is a requirement at my customer end to have configurable product for catalog items.. it is possible???? As per my understanding it is not....
    Configurable Product like: When some with employee role tries to but computer / laptop... he should be in a position to select from drop down menu in the shopping cart menu as which specification of HDD he can select 60 GB, 80 GB, 100 GB etc as maintained as characteristics multi value; similarly like selection of Display etc...
    Please let me know if you have alternatives or work around's etc...
    Regards,
    Ram

    Hello Ram,
    There are several options.
    1. E-Form
    OCI has Business type = E-Form option. You can develop your own UI and transfer the values by BADI. There is Business card sample in the system.
    SE80, Internet Service BBP_FREEFORM
    SE19, BADI implementation BBP_BUSINESSCARDS
    SE18, BADI definition BBP_CAT_CALL_ENRICH
    2. Supplier SKU
    If supplier provides SKU, you can put all SKU in the catalog. Memory and Disk should be attributes/Characteristics.
    3. Coming SRM-MDM Catalog 2.0
    I think there are some functional enhancement.
    Regards,
    Masa
    Message was edited by:
            Masayuki Sekihara

  • SRM-MDM catalog 3.0 - Installation Process

    Hi All,
    I'm in the process of installing SRM-MDM catalog 3.0 but I'm not sure about the correct installation process.
    The SRM-MDM catalog 3.0 installation guide indicates that the following instances are mandatory for SRM-MDM Catalog system:
    1- Java system with the central instance, the central services instance, the database instance
    2- MDM Server, and MDM Import Server
    We have covered the first point by installing an SRM 7.0 JAVA system. Regarding the second requirement, I have some doubts in the way it should be completed. What we did so far was to install the SRM-MDM catalog 3.0 from the MDM 7.1 installation master. So, we now have two MDM server instances: MDS and MDIS.
    I'm stuck now. I'm not sure on how to connect my SR-MDM system to the JAVA DB (created in step 1) to create a new MDM schema within it. This makes me wonder if I've followed the correct process. Could you please clarify and explain which steps should be performed to get my SRM-MDM system up and running? Actually my main concern is..Should I first install a MDM system as it's described in MDM IG, and after that perform the installation of the SRM-MDM catalog as I've already done in step 2?
    Hope being clear enough I'll wait for your suggestions.
    Thanks and regards

    Hi Diego.
    The Installation Note Number for SRM-MDM Catalog 3.0 is : 1177779. The recommended steps would be to follow how the Installation Guide recommends you to do so.
    But still your assumption is correct. MDM landscapes and Java landscapes are both different set of categories to be installed to make the Catalog scenario to be successfull.
    Step 1:  Make sure you have the back end database server(SQL/Oracle/???) is installed.
    Step 2:  Make sure all the MDM components(MDS, MDIS, etc) is installed.
    Step 3:  Make sure Java WebAS is installed correctly.
    Step 4:  Now deploy the Catalog SCA and MDM Connector deployed in the Java WebAS.
    Step 5: You can unarchive and load the repository.
    Step 6:  Try to launch the catalog using the URL provided to check and make sure if the connection is fine.
    Also what Masa has mentioned is the communication path how the whole process is achieved technically and that doesn't mean that it has to be in the same order which he has mentioned. The below sequence is just an path to describe how the communication is achieved technically.
    User -> Browser(Search UI deployed on AS Java) -> (Java API on AS Java) -> MDM Server -> MDM Repository -> DB
    Relating Masa's path with the above steps
    User ->
    Browser(Search UI deployed on AS Java) -> Step 3 and 4
    (Java API on AS Java) -> Step 3 and 4
    MDM Server -> Step 2
    MDM Repository -> Step5
    DB-> Step 1
    Hope this helps.
    Regards
    Bala
    Edited by: chandar_sap on Aug 30, 2010 6:16 PM

  • Shopping list in SRM-MDM catalog?

    Dear Experts,
    What is the use of shopping list in SRM-MDM catalog?
    I have created a new shopping list in the system. I have filled the name, description and other details in the new shopping list.
    When I select my shopping list, the button u2018Add to shopping list u2018is still disabled. How we can add new items to a newly created shopping list? My understanding is that a shopping list is created to include different shopping items  as favorite list?
    What is the function of the button u2018Share/Unshareu2019 ?
    Please, help me to understand the functionality of shopping list in SRM-MDM catalog 3.0?
    Thanks and regards,
    Ranjan

    Note 1141870 - SRM-MDM Catalog: Usage of Shopping List (Memory, M/S)
    Symptom
    The usage of Shopping Lists in the SRM-MDM Catalog has direct influence on the memory consumption of the MDM Server.
    Note 1153525 - Enabling shopping lists for named users
    Note 1165452 - SRM-MDM Catalog 2.0 SP04 Patch00 Release Note
    Shopping Lists
    You can use this function as a:
    Template for orders that are made regularly
    Search criterion
    Prerequisites
    Your User Interface (UI) Configuration Manager has given you shopping list authorization.
    A shopping list must have at least one item in it to serve as a search criterion.
    To display all items in a shopping list, the search criterion must be reset before the shopping list is selected.
    This is because the search UI treats the shopping list as a search criterion. Consequently, any other active search criterion reduces the items displayed to a subset of all the items in the shopping list.
    To display all shopping lists, including empty ones, on the Shopping List tab page, one of the following conditions must be met:
    No other search criterion has been entered
    The search has been reset
    Activities
    When a shopping list is selected as a search criterion, the system restricts the search by removing any items not included in the list from the search result.
    Items can be added or removed from shopping lists in the shopping cart preview.
    Note
    Depending on authorization, users can modify either their own shopping lists or those of others.
    This function provides search strategies for locating products, displaying product item details, and transferring items to procurement applications such as the cart. The Search User Interface (UI) can be configured to meet individual user requirements.
    Prerequisites
    The User Interface (UI) Configuration Manager is responsible for configuring the search UI.
    If you cannot access some of the functions and features listed below, check that your user has been correctly configured. For more information, see User-Specific Configuration: Product Procurement
    Features
    On the Search tab page:
    Keyword search
    Advanced Search
    Hierarchy (category) View
    Allows you to drilldown when searching. This view also displays product attributes, if they have been maintained.
    List View (for displaying search results)
    Displays results with images and a URL to item details
    Context View (for displaying search results)
    Navigation up and down the list is possible and item images are also available.
    In the List View and in the Context View, the following functions are available:
    Add To Cart
    Compare for price comparisons. For more information, see Compare Function
    Cart Preview
    On the Cart Preview tab page, the following functions are available:
    Transfer Items
    Delete
    Delete All
    Back to Search Result
    Add to Shopping List
    Recalculate
    Add to Shopping List
    Remove from Shopping List
    Current search parameters are displayed on the Search Criteria tab page.
    Shopping Lists can be maintained on the Shopping Lists tab page.

  • What is use of Hyperlinks and Pdfs in srm-mdm catalog??

    Hello friends,
    I have added one Pdf file in data manager, in this, it is showing no thumbnail. But in EBP it is not showing any Pdf file. can suggest how to show this Pdf loaded file in EBP(Enterprise Buyer Professional). i dont know whats the purpose and how to use hyperlinks in srm-mdm catalog. Also why there is MIME types and Hyperlinks type look up tables in srm-mdm catalog repository. how to use them?
    Please do suggest........
    Regards,
    Mandy

    Hi Mandy,
    You can do this:
    On the MDM Console, right click on the Repository -> Properties -> PDF -> Allow invalid PDFs -> Yes .
    Alternatively,
    You can also find some information about it on https://service.sap.com/srm within this link on the left frame go into
    mySAP Supplier Relationship Mgmt --> mySAP SRM in Detail --> SRM 5.0 --> Catalog Content Management --> SRM-MDM Catalog and you will get the document.
    Hope it helped.
    Regards,
    Krutarth

  • SRM-MDM-Catalog - Searching various products ID

    Hi,
    At the catalog's search, can I enter with various products ID separated by ";" or "," and list all items of this list? The user did it when use SRM 2.0 with Requisite. He search various products in a same query.
    For example:
    Product ID field: 112548; 4845; 151515  -> Search button
    Results:
    112548    Product 1     Group 1
    4845      Product 2     Group 1
    151515    Product 3     Group 1
    I'm using SRM-MDM-Catalog. Its possible when I use this catalog?
    Thanks,
    Evandro

    Hi Evandro,
    Not too sure what your requirement is but these are the search operations posible in SRM-MDM v2.0.
    word* = „Starts with“
    *word = „Contains“
    +word = „Sounds like“
    =word = „equal to“
    Semi Colon = or
    Regards,
    Adeoye

  • SRM MDM Catalog (Subscreen Error)

    Hi,
    I am facing an issue with the SRM MDM catalog.
    We are currently implementing SRM-MDM catalog 1.0 SP1 Patch01 HF1.
    Our MDM server version is MDM 5.5 SP5 Patch02 HF1.
    The steps while creating a Shopping Cart are as follows:
    -     Log into SRM Shopping Screen.
    -     Select the SRM MDM Catalog
    -     Inside the SRM MDM catalog select an item and click on the shopping basket to add the item to the shopping cart.
    -     Once I click on the shopping basket we are getting the below error
    <b>Error when processing your request</b>
    What has happened?
    The URL http://mb1es1001.idcsap.com:8000/sap/bc/gui/sap/its/bbpsc01/ was not called due to an error.
    Note
    The following error text was processed in the system <b>SR6 : Subscreen not found</b>
    The error occurred on the application server MB1ES1001_SR6_00 and in the work process 1 .
    The termination type was: ABORT_MESSAGE_STATE
    The ABAP call stack was:
    SYSTEM-EXIT of program SAPLBBP_SC_UI_ITS
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SR6 in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server MB1ES1001_SR6_00 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server MB1ES1001_SR6_00 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    <b>Error code: ICF-IE-http -c: 001 -u: RAJ -l: E -s: SR6 -i: MB1ES1001_SR6_00 -w: 1 -d: 20070912 -t: 143649 -v: ABORT_MESSAGE_STATE -e: Subscreen not found</b>
    If any have any idea about this error, please help me resolve it. Full points will be awarded.

    Hi
    <b>Check the SAP Note 967088 and download the configuration guide from SAP official website (SAP Marketplace - OSS Login required). Did you raised any message with SAP as well on this yet. If not, please do the same for faster processing of your query.</b>
    <u>Please check what all error logs appear in SLG1 and RZ10 and RZ20 transactions in this case.</u>
    Which SRM/CCM/MDM versions, support packs are you using ?
    FYI, Catalog names are case sensitive.
    OCI parameter should be like this.
    0 http://<J2EEhost.domain>:<J2EEport>/SRM-MDM/SRM_MDM
    10 username User1
    20 password <blank>
    30 server <MDM Server>
    40 port <Repositiry port>
    50 catalog <Repository name>
    60 uilanguage SY-LANGU
    70 datalanguage SY-LANGU
    80 mask <blank>
    90 named search <blank>
    User name and password mainatined in MDM console is case sensitive.I would suggest you to follow this step
    1.In MDM Console for User1 enter password as user1(note that password is all small case)
    2.Ensure that you enter the password in similar manner in defining OCI.
    <u><b>Please try the following OSS Notes & links below -></b></u>
    OSS Note 895183
    947362
    938495
    Note 871302 - Unable to switch between catalogs using F4 help
    Note 890967 - /CCM/CHECK_TREX shows incorrect document content
    Note 946185 - CCM20: /CCM/CHECK_TREX modifications
    Note 707781 - Product search does not find all documents
    Note 481295 - Short dump RAISE_EXCEPTION when expanding a product node
    Note 723688 BBP TREX corrections for SRM 4.0 SP01
    Note 778688 TREX_INDEX_MANAGER unit test update_view(): incorrect search
    Note 930788 - Search help for catalog does not display all catalogs
    Note 1028343 Changes in the repository not reflected in Catalog UI
    Note 1015201 - SRM-MDM Catalog 1.0 Patch02 Release Note
    Note 487917 BADI implementation f. BBP_CATALOG_CONTENT (Troubleshooting)
    Note 877131 Product category is not permitted for the user
    Note 623067 SRM 2.0 Integrated Catalog does not display catalog info
    Re: ITS Template not found
    SRM MDM Catalog --Login error
    Do let me know.
    Regards
    - Atul

  • SRM MDM Catalog Multiple Imgae (field) display in UI

    Hi MDMers,
    I have configured the SRM-MDM Catalog and I had done Import data, mapping data, OCI, SRM call structure and UI settings. Everything works fine when we call the Catalog in SRM.
    My SRM -MDM Catalog needs certain custom fields which should hold some Button indicator for item classification (Red, Amber, and Green)
    Already we used MDMSRM_IMAGE field to have pictures of Item and mapped in Display view in UI manager.
    I tried one more custom field for the Image to hold this buttons (.gif file) but unfortunately it is not bringing the indictor images, just place holder is exist without indicator image.
    Could you please help me and give some work around solution to bring that Button Indicator in My Catalog view for each item.
    Please light up something on TEXT HTML, TEXT BLOCK, HYPERLINK and mime type
    Is it possible to have the .gif Image by using above functionality? If so please guide mates.
    Regards
    Edwin

    Hi Tam,
    I have tried to set up hyperlink for my images in SRM-MDM catalog.But no luck.
    1. My MIME Type is GIF.
    2. My url is
      http://fssomsdits01.forensic.gov.uk/eMerge/images
    The URL path contains my Images file like GREEN.GIF and RED.GIF
    Where I have to display the 2 images according to the catalog Item.
    As per forum discussion I tried the steps.
    I declared the MIME Type & Hyperlink type (rendered) in Look up table.
    I have mapped the fields in Catalog item table for MIME Type<hyper link> & URL<hyper Link> and Hyper Link.
    The data is just replicating in DATA manager, but not displaying in UI as image.
    Please can you help me to sort it out?
    Just explain me how to enable the Hyperlink field to line item.
    The steps to import thre Mime type/hyperlinku2026look up table and Qualified table.
    Regards
    Edwin

Maybe you are looking for