SRM MDM Catalog - Transfer Contracts from SRM - XI - MDM

Hi,
We are implementing SRM MDM Catalog1.0 with SRM 5.0 & ECC 6.0.
We have already configured XI content for MDM Catalog.
We have also done the basic settings for transferring contracts from srm to XI (including Backend System & Check box in Contracts for transfer to catalog).
But when i run the report SRMMDM_CTR_TRANSFER, the log tells me that contracts transfer has been initialized, but I cant see any XML message in SXMB_MONI
Can someone pls help and tell me why is that happening??
Thanks in advance.
Regards,
Jasmeet

Hi Mausam,
yes we have a SRM system from which we want are going to be sending Contracts, Prod Id's, Product Categories, Suppliers List etc from SRM to MDM using XI.
We have the Pre delivered content for XI from which we have set up the Interfaces etc.
This mapping between SRM-XI-MDM works pretty fine if i try to send Products or suppliers from SRM. I can see the IDOCs being generated. But when i run the report for Contracts, I cant see any IDOC in SXMB_MONI in SRM which is my source system.
So hence my question..... Is there some other way by which Contracts are transferred and if so then how and where can I see it.
Regards,
Jasmeet

Similar Messages

  • PI setting for transferring Contract from SRM to ECC - Classic scenario

    Dear Experts
    SRM 702
    ECC 6.0 EHP6
    SRM - Classic scenario
    Need to understand PI setting for transferring Contract from SRM to ECC, as currently document Central Contract document getting created in SRM, but it is not getting transfer to ECC
    No XML message getting triggered in ECC systm as well
    can you help me in this
    if any additional information needed, pls revert
    Regards
    Prashant K

    Fully approve and release the contract. It will trigger the XML Message.
    Go to https://websmp203.sap-ag.de/~form/handler?_APP=00200682500000002672&_EVENT=DISPLAY&_SCENARIO=01100035870000000122&_HIER_… and download the configuration guide & check the PI setting and required Software Components in PI.

  • Creation of backend contract from SRM system?

    Dear Experts,
    I am bit confused with the scenario of creation of backend contract from SAP SRM system? It says in few cases, based on the BAdi 'BBP_DETERMINE_Logsys', the system creates a backned contract directly in a backend ERP system. Why do we need when we have central contract?
    We can meet the same requirement through central contract where we will authorize only purchasing organizations of a backend system and block the contract for local sourcing in SRM?
    Secondly, How to find a contract / scheduling agreement created in a backend system when a central contract is distributed to the backend system?
    Thanks and regards,
    Ranjan

    Hello Ranjan
    question on contracts?
    Note 1476307 - Importing parameter not filled in BADI BBP_DETERMINE_LOGSYS
    in classic scenario , The Business wanted to create a contract from cockpit or via BID
    this BADI helps
    Symptom
    You have implemented BAdi BBP_DETERMINE_LOGSYS to control the system in which contract is created in following scenarios:
    1. Creation of contract from an accepted quote / bid.
    2. Creation of contract from a requisition in SOCO.
    In the method IF_EX_BBP_DETERMINE_LOGSYS~CONTRACT_LOGSYS_DETERMINE of the BAdi implementation, importing parameter IT_ORG doesnot have any values.
    Other terms
    Backend contract
    Reason and Prerequisites
    some business wants to create a backend contract from SRM . see some Dinesh Powale / Claude  threads for more understanding.
    Muthu

  • How can I transfer contract in SRM to ECC?

    Hi Experts,
    How can I transfer contract in SRm to ECC, and then we can do subsequent process, such as PO reference contract.
    Thanks a lot!!!!!!

    Hi Jock,
    Are you trying to transfer local SRM  contract to ECC system?.
    GOA can distribute to backend system as a process contracts and scheduling agreement right?
    local process contract only for SRM system right ? you can not push local contract  to backend .
    However  you can bring backend  ECC contract to SRM .
    what is your business requirement ? which version are you working on?
    since SRM2007 purhase contracts and GOA 's are merged to form a single central contract which is available for sourcing localy in srm and can also be distributed to different backend ECC systems.
    br
    muthu

  • Searching SAP contracts from SRM 4.0

    Hi,
        Does any one know what configuration needs to be in place if i want to search SAP contracts from SRM 4.0 in classical scenario. We dont want to copy R/3 contracts in SRM.
    Would appericiate your response.
    Regards,
    MD

    Hello ,
    In classic scenerio the Backend Contracts will be available in the SOurce of Supply Tab in the Shipping cart screen.
    System will propose the Contarcts from BE based on the Product Category in Shopping cart item.
    Cheers,
    Sid

  • Transferring contract from SRM to R/3

    When I trigger a contract from SRM to R/3, then
    1) If there is no material code in BID then, while transferring account assignment gets changed from K(cost centre) to U (unknown).
    2) If there is material code in BID then account assignment category comes as blank henceforth contract does not get made and throw an error.
    I am tranferring data by IDOC.
    While if I make a PO from this bid then it works perfectly fine.
    Pls. guide. Thanks
    Parag
    09881240969

    Rajesh,
               We are facing the same problem
    Is your issue resolved, can send us the solution.
    Thanks
    Sanjay

  • Transfer 'Title (from SRM Org) of the approver'  to PR

    Hi Gurus
    SRM 5.0 , Classic, always create PR
    How do I transfer 'Title (from SRM Org , e.g Manager, Director etc ) of the approver'  to PR ?
    -Pranav

    Hi Disha,
    Thanks.
    Step 1) PPOSA_BBP
    Step 2) Go to any Org.
    Step 3) Double click on any Position
    Step 4) Go to 'Basic Data' of Position TAB
    Step 5) Go to Description of the Position (e.g PRODUCT MANAGER )
    I want to transfer "PRODUCT MANAGER" to the PR
    -Pranav

  • Transfer additional data together with a contract from srm to srm-mdm

    Hi All,
    I have a requirement to transfer additional data together with a contract, such as price scales, discounts, and discount scales
    If the contract has condition like
    scale Discount
    0-10 20%
    20-30 30%
    from SRM to SRM MDM Catalog.
    As a standard practice, we use report SRMMDM_CTR_TRANSFER in SRM to send the standard Contracts from SAP SRM system to the SRM-MDM Catalog repository via SAP XI.
    But to transfer additional data , we have to use BBP_SAPXML1_OUT_BADI in SRM 7.0.
    If any body worked on the same, please let me know the step by step procedure how to implement BBP_SAPXML1_OUT_BADI.
    Regards,
    Venkat

    Hi Venkat,
       You can have a look at the Note - 1296876
    It gives the step - by -step procedure on what how to Enhance Contract Data Transfer.
    For this, you may have to do the implementation in BADI BBP_SAPXML1_OUT_BADI
    Change the XI mappings and the MDM Import manager mappings.
    Hope this helps.
    Regard,
    Sherfu

  • XPath error while transferring products and contracts from SRM to SRM MDM 2

    Hi experts,
    I am getting the following error in SXMB_MONI (in XI) when I transferred contracts or products from SRM to SRM MDM. I have maintained xPath entries based on the SAP delivered note but still getting this error. Please help.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Interface Determination
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
      <SAP:P1>Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160).</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when determining the inbound interface: Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: CL_SWF_RLS_COMPARISON=========CP, include: CL_SWF_RLS_COMPARISON=========CM002, line: 63). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: SAPMSSY1, include: , line: 0). Exception CX_SWF_EXP_EVALUATE occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM027, line: 38). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM01Z, line: 520). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SAI_SWF_RULE_ENGINE========CP, include: CL_SAI_SWF_RULE_ENGINE========CM00S, line: 42). Problem when processing the XPath expression /nr1:CatalogTransmission/Catalog/CatalogContent/ItemList//Item[PropertyValuationList/PropertyValuation/PropertyReference[text()</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    thanks,
    Surya

    Hi
    Are u using any FCC parameters for file adapter?
    If so don't do that. I tried with the same. You have to go with xml only. Otherwise there is some package related to that. you need to download.
    Go to this note for more details.
    SAP Note Number: 962165
    Regards,
    Pavani

  • SRM-MDM Catalog - Transfer Product masters

    Hi Guys,
    I am using SRM 5 and SRM-MDM 2.0. I have uploaded using MDMGX all the product groups, currencies, and UOMs successfully.
    Now I have set up XI and SRM for transferring Product masters, suppliers and contracts. When I run BBP_CCM_TRANSFER, I am getting confirmation with green light. However, I am not seeing any messages in SXMB_MONI. But when I send the suppliers, I could see messages in SXMB_MONI in SRM and Xi and both are with checkered flag (successful). But in MDM, I do not see any supplier entry. Where do I see?
    Also, why I can not see SXMB_MONI message for product master transfer.
    Any help is highly appreciated with loads of points.
    thanks,
    Surya

    Hi Masa,
    Thanks for your reply. I have configured Xi communication channel. I have put the FTP server entries and path to the ready folder in communucation channel as per the ftp server set up. But the file is not in Ready folder when I checked the ftp directory path. It didn't even show any entry in SXMB_MONI in SRM. Do I have to make an entry in "Define Backend Systems" in SRM for SRM-MDM catalog?
    Also, when I transferred the suppliers it is showing up in SRM and XI under SXMB_MONI as successful but was not there in MDM data manager. Do you know where I can find the supplier that I loaded through XI?
    Also, I would like to confirm that my FTP path in communication channel I have changed based on what we configured for our FTP server to the Ready folder and so is it OK or we have to leave it as it is. Is it possible to send me your commincation channel screen shot? I would really appreciate your help.
    I will give so many points.
    thanks,
    Venkata Nibhanupudi

  • Contract from srm to SAP R/3

    I made a account assigned pr(with cost centre) in SAP R/3, then i transferred it to SRM, and made a bid in SRM, after all I selected one bid and triggered a contract in SRM so that contract gets made in SAP r/3.
    Now the contract automatically picks account assignment as "U" while account assignment is mandatory for that material so it does not make a contract and gives error that account assignemnt mandatory for that material.
    Basically account assignemnt data is not being picked up when i transfer pr feom R/3 to SRM.
    So when I make a contract it also does not get transferred from SRM to R/3.
    Pls. help and guide.
    Thanks
    9881240969

    Hi Nacho.
    Sorry the bad news, but account is not transfers from SRM to ECC or from ECC to SRM in contracts.
    The Contracts goes between systems via IDOCs (BLAREL)
    As you can see in transaction WE60, IDOC BLAREL02 has not account data.
    Regards.
    Raúl.

  • How to transfer Vendor from SRM  to SAP R/3

    Hi...
    How to transfer Vendor registered in directly via self regstration in SRM to SAP r/3 system
    regds
    Kumar

    Hello Kumar,
    Please find the SAP documentation:
    http://help.sap.com/saphelp_srm50/helpdata/en/b2/a298403de08368e10000000a1550b0/frameset.htm
    I have not tested the functionality but as per documentation Under Business Partner Monitor transaction, you can synchronize SRM vendors with ECC vendors directly using a pushbutton Transfer Change to Backend.
    Other useful threads.
    Tranfer vendor data from SRM to ERP (R3 / ECC)
    Vendor data transfer from SRM to R/3.
    Hope this helps.
    Thanks
    Ashutosh

  • Transfer attachment from SRM SHC to ECC PO

    Hi,
    Im working on SRM 7.0.Classic scenario.I need to enable the transfer of attachments from SRM SC to R/3 PO.Can anyone explain the steps to achieve the above?
    Also in case of extended classic scenario,is the attachment transferred automatically from the SRM Local PO to ECC PO?
    Thanks!
    regards,
    SRM Tech

    Hello SRMTECH,
    You have to do some configuration settings in SPRO
    SPRO>Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Define Settings for Attachments.
    We are also working for the same requirement. We have did following configuration / customization to achieve this.
    - Activated BADI "BBP_CREATE_BE_RQ_NEW" in SRM and set the indicator as follow:
    cs_ctrl_att-BE_DOC_TYPE = 'SRM'.
    cs_ctrl_att-BE_storage_cat = 'DMS_C1_ST'.
    cs_ctrl_att-TRANSFER_ACTIVE = 'X'.
    - In ECC Side T.code DC10 and defined document type for SRM with following
    Add a New Document Type SRM (if not already exists). Set 'Use KPro', 'Version Assign' and 'Change
    Docs'. Set the Internal and External Number Range (02 and 01). Use MCDOKZNR as Number Exit.
    Ver No. Incr = 1 and Set the File Size (Usually 10000000 bytes).
    Once the Document Type is created, define Object links to PO Item and Pur Req Item. Use - Screen
    Number 247 and Screen Number 248 with Valuation Object of EBAN and EKPO for Objects EBAN
    (PReq) and EKPO (PO) for Doc Type SRM.
    After doing this changes we were able to transfer attachements but we are still facing one issue as we were not able to open that particular document in ECC / R3.
    See related threads for more pointers:
    Attachment transfer issue from Shopping cart to Purchase req in ECC
    Re: How to check the attachment in ME53N
    Re: Sending attachments from SRM to SAP Purchase Requisition
    Re: Attachments with follow-on documents.
    Arshad

  • PI Development  to Transfer PO  from SRM to Suppliers through PI 7.1

    Hi,
    PI Development Question:
    I have requirement to Transfer PO Document(XML) from SRM 7.0 to PI and PI to Suppliers in cXML format. In PI , SLD I have created Technical and Business System for SRM System. I am planning to use HTTP adapter in cXML format to Suppliers. I have URL from Supllier Where to Post this PO Document. But When I am trying to Configure in SLD  for Suppliers( As Third Party Systems) its asking System Name and Host Name.
    Do I need to request Suppliers for Hostname and System name too regarding their system?
    For each supplier do I need to create a seperate Technical and Business System? If yes, When PO sent from SRM, based on Supplier on PO How to identify for whom I need to sent the PO(Purchase Order).?
    What is the complete process from SRM->PI -> Suppliers? If you have any steps or documentation for this please let me know.
    Thanks for your help!
    Thanks,
    Monica

    Hi Monica,
    Create one business system for SRM and for cXML suppliers. Use them for all the suppliers. For SRM you can assign the technical system giving the techincal details for SRM and for all suppliers you can create busniess system something like Sys_DCorpcXML  where D is for development and for Quaity you can give Q and P for production (you can cahnge according to your naming standards). Now assign the role as application system and the corresponding xi as integration server.
    > Do I need to request Suppliers for Hostname and System name too regarding their system?
    No need to ask them
    > ( As Third Party Systems) its asking System Name and Host Name
    Specify as I mentioned above
    > For each supplier do I need to create a seperate Technical and Business System?
    Use teh same business system for all the suppliers
    > how to identify for whom I need to sent the PO(Purchase Order).?
    Configure and route them in receiver determination based upon supplier no. etc.
    Regards,
    ---Satish

  • SRM-MDM Catalog latest version and SRM 6.0

    Hi MDM Users,
    could anybody tell me when will be released SRM-MDM Catalog 2.0? As I know, latest version is 1.0 Patch03.
    Do you have any information about release of SRM 6.0?
    Thanks and regards,
    Álmos
    Message was edited by:
            Álmos Paksi

    Hi Álmos,
    The SRM-MDM Catalog will be releases on July 2nd 2007.
    This catalog version will also be part of SRM 6.0.
    Best Regards,
    Daniela Schweizer
    SRM Solution Management

Maybe you are looking for