SRM MDM - store multiple pricing for one entry and have it select the price based on a users site

I've had an interesting request. We have a region where they have one supplier who will support some products for multiple sites. The sites are in different cities and so the pricing varies based on the location of the user. I know how to do price scaling in SRM MDM but wasn't sure if there was a way to have one part that could someone pick the right price based on the user. I don't think this can be done since we don't pass any "user" information in the OCI connection.
Has anyone run into this scenario and was there some other way to not duplicate the entries or create a separate view just because the pricing was different for the same product but different site? I'm open for suggestions. I'm looking to make long term maintenance of the data as easy as possible.
We are still running SRM MDM 5.5 SP6
Thanks,
Cathy

Tom,
Check if the below given link can give you some lead.
http://help.sap.com/saphelp_NW04/helpdata/en/dc/dc7614099b11d295320000e8353423/content.htm
Thanks,
K.Kiran.

Similar Messages

How to store multiple records for one master reocrd using sequnce

dear,
my question is in one form i have master block f and detail block.
my question is i created one sequence and assign to master table. but i dont know how to assign that sequence to multiple record in detail table for that particular master record. i got lots of answer previously but i m not getting exactly.pls tell me full procedure otherwise gv me one demo application
NOTe: the sequnce is created after master record commiting to database.
PLS pls help me
Thanks
damby

i did not get answer pls help me.

Can I use multiple IDs for one iTunes and multiple devices

We have one family computer with iTunes, my older brother has an iPhone and I have an iPhone. A family ID was previously used to purchase songs for the family to share. My older brother has created an apple ID for his iPhone, and l have a yet unused apple ID. my brother downloaded songs etc onto the family iTunes that I would like to share, there are songs on the family apple ID that we would both like. Can you download purchases from multiple apple IDs into one iTunes account, then sync that data onto multiple phones that each have a separate ID? Is iTunes linked to one ID? Can purchases from multiple IDs be grouped together in our family account. Also do I Actually need a separate Apple for my iPhone to prevent private messages and contacts being shared?
Thanks for any advice

I forgot to add my iPhone is brand new and unused, and also that the iTunes account has non purchased songs on there. Can these be shared. As it is a new computer the purchases from the family ID have not been downloaded yet

Multiple libraries for one ipod and match?

Ok, so... I've got about 1500 songs purchased via itunes, and own about 3500 CDs, which I'm in the process of adding to my library. All but about 50 of the discs were already ripped years ago, and I'm just copying the backup mp3s onto my new external drive after the last one failed. Anyhow, I just got itunes Match and I'm wondering if I made a mistake in doing so. Is there a way to have songs from multiple libraries on my ipod? Due to the sheer volume of music (and other thigns) I own, I'm wondering if I should just make a comedy library, a blues library, a synthpop library, a metal one, a rock & roll one, an oldies one and so on. If I do that, will I be relegated to having to decide what style of music I want on my ipod at any given time, or is there a way for me to load different items from multiple libraries onto the thing?
I'm halfway tempted to just delete my entire library from itunes and just be SUPER picky about what tracks I add in order to be able to get under the 25K limit. As is, right now I've got 21411 items in my library, over 20000 of which are in match, but it keeps crashing on step 3 right now. As is, I already know I need to re-mp3 some of the discs since when I did them originally they were less than 96K (oddly, I'm finding it's mainly on my "oldies" discs like the American Graffiti soundtrack), and that doens't bug me, but the idea of having to go through song by song and add only what I want is one I'm not too fond of and that I'd like to avoid if at all possible.
I'm really digging match, but not so much now that I realized there's a hard limit to the number of songs available. I don't think Apple is used to folks like me who live & breathe music and attend well over 100 concerts in the average year.
Thanks for anyone who's read all of my rambling, and any of y'all who can provide me a bit of guidance!
-Ann

This would be making is WAY less difficult. This is a MUCH needed feature in iTunes that they should add. As a DJ I absolutely hate having all my music in one library. Certain genres, like Electronic music, deserve to be in their own library. I would like to be able to hit the Music icon on my iPod and have it ask me what library of music I would like to access.
This would allow siblings to share one iPod and not have to combine all of their music together. Or you could make a library of music with no explicicit music on it (and passcode it) so that you don't have to worry about kids having access to your explicit material if you let them use your iPod.
You can already make multiple libraries in iTunes, why not just add the obvious next step and be able to add multiple libraries onto one iPod.

HT1495 Multiple logons for one computer and multiple devices trying to use one itunes account.

I have one computer with a logon for Kids and one for Adults. There is a touch and nano that was added to a single itunes account tied to my email on the adult logon and the shuffle that is on the kids account. I can't seem to get the multiple devices access to all the songs with out erase and re-sync error message when not using the right device on the assigned logon to the computer - why and can we change this?

It sounds like each Windows user has it's own iTunesLibrary.itl file. If that is the case, then you are correct, the correct device must be connected when logged in with the correct login.
If all Windows logins share an iTunesLibrary.itl file... then it does not matter which login is used or which device is connected.

Multiple payers for one sold to party

Hi All,
Can we have multiple payers for one sold to party?
Thanks

Hi
Yes, you can have multiple PAYER for one Sold-to-party (only in the Customer master).
This Partner relationship is maintained in two places. They are,
> Customer master ( sales area data > partner function tab )
> Sales documents (at Header level and Item level)
In Customer master data, you can have multiple partners ( e.g, multiple Payers) for one Partner function( e.g, SH,BP,PY).
But in Sales document, you can have only one Partner for one Partner function.
So, you can have only in Customer master data multiple pertners. So, first create the different Payers through XD01 ,choosing Account group "Payer".
Then assign all those PAYERS in the master data of the Sold-to-party by going in the change mode XD02 and save it.
When you create the Billing document, system will give a pop-up of those list of Payers and you have to choose one . You can have only one Payer in one Billing document.

My iPhone3GS running iOS5 has recently been reluctant to upgrade Apps. The App store asks for my password and then marks all the Apps as being updated. Often only one or none actually update. Usually I get a message saying "Unable to download application"

My iPhone3GS running iOS5 has recently been reluctant to upgrade Apps. The App store asks for my password and then marks all the Apps as being updated. Often only one or none actually update. Usually I get a message saying "Unable to download application" and "<app> could not be downloaded at this time - Done or Retry".
It's not an iTunes login / password issue because sometimes one or two of the Apps will download and the others stall with the blank progress bar. The internet connection is working fine in all other respects.
Sometimes, many restarts later the downloads will complete. Is this a known bug? Is Apple working on it? Any fixes?

My iPhone3GS running iOS5 has recently been reluctant to upgrade Apps. The App store asks for my password and then marks all the Apps as being updated. Often only one or none actually update. Usually I get a message saying "Unable to download application" and "<app> could not be downloaded at this time - Done or Retry".
It's not an iTunes login / password issue because sometimes one or two of the Apps will download and the others stall with the blank progress bar. The internet connection is working fine in all other respects.
Sometimes, many restarts later the downloads will complete. Is this a known bug? Is Apple working on it? Any fixes?

How do i scan multiple pages for one attachment

I know how to scan but I don't know how to scan multiple pages for one attachement....Help please

Hi dagda24,
You can scan multiple pages into a single document with the scan to PDF option. Use the following steps to do so:
1. Open MP Navigator.
2. Click One Clcik.
3. Click Save to PC.
4. Change the File Type from PDF to PDF (multiple pages).
5. Make any other changes as needed, then click scan.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to open multiple sessions for one user?

Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
select col1 from my_table where row_id = 1
-- shows result is 1
update my_table set col1 = 0 where row_id = 1
select col1 from my_table where row_id = 1
-- shows result is 0and then enter into the second worksheet:
select col1 from my_table where row_id = 1
-- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
Re: Help with Procedure
Edited by: tem on Apr 18, 2012 6:44 AM

Thanks Jim,
Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
I don't see an option for "Worksheet".
UPDATE:
OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
Edited by: tem on Apr 18, 2012 8:00 AM

Multiple Values For one Condition in Choose From List

I have used one Business Partner Choose From List in my form but i want to give condition in that choose from list on GroupCode .But the condition will have multiple values like 100,102,104 then how i will write the code to incorporate multiple values for one single condition.

Hi,
Check this thread
How to set a Multiple condition in a single CFL
Hope that helps,
Vasu Natari.

I recently brought an IPod touch 5th generation from online. When I saw it online it looked as if it had back camera but it doesn't. I was wondering if I could visit an Apple UK store to exchange it for one that does have back camera

I recently brought an IPod touch 5th generation from online. When I saw it online it looked as if it had back camera but it doesn't. I was wondering if I could visit an Apple UK store to exchange it for one that does have back camera??

Apple have never accepted trade-ins agains the cost of a new device. You will need to sell the one you bought and apply the proceeds to the model you want.

Multiple Artists for one so

Hi all, Kapyrna here.
I just bought a Zen Vision:M 30GB and I love it, for one exception:
I have a lot of video game remixes and such that have more than one artist as filed in Windows Media Player (like this: [artist]; [artist2];...). I'm using ID3 tags (I think?) and some of the tracks on my Zen show as one 'artist' but with all the individual names strung together, semicolons and all. Other tracks show only the first contributing artist as the only artist.
If I can, how do I fix this? Also, is there a way to bind an album not split up into the various artists, but as "Various"?
Thanks in advance. My searches only found me the same artist appearing multiple times, the reverse of my issue.
~k

I'm not sure I understand from your post what it is that you want to see. You talk about what you do NOT want to see. Do you use an ID3 tag utility to make changes to your list of artists? My personal choice is ID3-TagIt (but there are dozens of other equally capable programs out there). With it, you can modify album names ... enter single or multiple artists ... and even add the composer, song lyrics, etc. However, just having those in the ID3 tag doesn't mean they will be displayed by all software programs (players) ... that's up to the person who writes the application. So even if you do put them in, your player might not display them how you'd like them to be displayed.
I know this doesn't specifically answer your question, but maybe you can rephrase it so we know what it is you want to see on your player's screen when you have multiple artists.
-Roger

Multiple Labels for One Order

Can anybody tell me if it is possible to produce multiple labels for one order. For example a customer orders 4 units. A standard package holds 3 units so an additional package is required for the fourth unit. As a result two packing labels are required. Does OM 11i support this?

Hi Aj
Thanks for your quick response. I was think on the same lines and you have confirmed that we will have to split the line into several lines on sales order.
I am trying to do that now in our ECC box i.e item 10 with payer 1 and item 2 with payer 2. But as soon as I try to change the payer on item 2, i get the following error message which relates to credit management being active.
I am assuming once we decativate CM, we should be good to go. PLease confirm. Also once its time for billing, will SAP automatically split the billing into different invoices per sales order line item based upon number of payers on the line items?
PLease confirm your thoughts.
Regards
Jai

Multiple currency for one vendor

Hi,
Is there any way to have multiple currency for one Vendor?

Hi Siva,
Yes, It is possible to maintain multiple currency for one vendor. How ? The procedure as follows.
During vendor creation using T-code XK01 and currency enter input data screen select Extra option on the top of the screen click and display 'Add Purchasing Data' option click opened new screen and give input data plant, tick mark of the option Data retent.at plant level allowed and tick for OK.
After that, you have enter multiple currency for the same vendor during vendor creation time, then you will create PO using T-code ME21N the currency field you have fill as you required currency by default first currency of vendor created will be display.
Hope, it is useful for you.
Regards,
K.Rajendran

Multiple choose for one parameter

Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
Select ....
where ....
content.style IN (:p_style)
(content.style is a column in table "content", and "p_style" is a bind variable)
i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
Li

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by whl:
Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
Select ....
where ....
content.style IN (:p_style)
(content.style is a column in table "content", and "p_style" is a bind variable)
i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
Li<HR></BLOCKQUOTE>
you can do that by flowing the stap
at first you will write a select statement
select ...
From ...
where Style (colomn name) = &style1
then you create a user parameter soupose wich name is P_style and which valus is x, y, and z you should enter another value soupose that name is 'All' (All means x + y + Z)
then you write in after parameter form trigger...
IF :P_style = 'All' then
:style1 := null;
Else :style1 := 'and style (style means your column name) = :P_style;
end if;
null

SRM MDM - store multiple pricing for one entry and have it select the price based on a users site

Similar Messages

Maybe you are looking for