SRM Middleware
Hi
Please let me know the Middleware Configuration settings
and some inportant tables in SRM.
Thnaks
Mukesh Kumar
Hi,
See this weblog for all MW settings:
/people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
Also see this note for all the related tables:
Note 720819 - Middleware consumer entry for SRM 4.0 in the OLTP system
BR,
Disha.
Do reward points for all useful answers.
Similar Messages
-
Why SAP SRM material replication happens through CRM middleware?
Can some one help me to understand, Why SAP SRM material replication happens through CRM middleware? Is there any functional/Technical reason behind this design?
Dear Sridhar,
SRM releases later SRM 4.0 are working with the same middleware implementation,
there where no changes between the releases. The SRM middleware implementation
was decoupled from the CRM middleware development at that time.
(Middleware is based on the basis functionality of queued Remote Function Calls qRFC)
Regards
Laszlo -
Material Replication still running
Hello,
I checked SMQ1 and SMQ2 in SRM and in my backend and those table are empty.
I set a filter and launch my material replication, but it still running for long long time. it is not normal and i don't know why...can you help me?Hi
Which SRM and R/3 versions are you using ?
<b>Please go through these links, which deal with the same scenario -></b>
Material not downloaded from R/3
Material Replication from R/3 to SRM - Object status stuck in Running mode
DNL_CUST_BASIS3 still running
Re: Inbound Queue not visible in SMQ2, after starting Material replication
SRM Middleware Replication - Initial Download Failure
materail gruops replication
Problems using R3AR4
Downloading material from R/3
set filter in R3AC1 for material master
Replication product and service masters
Re: Deleting some replicated materials from SRM
Replication problem in 5.0
Hope this will help.
Regards
- Atul -
Hi Experts ,
Presently we have SRM 5.0 , but i have a querry that why we are using XI instead of Middleware .
Pls suggest your kind concerns .
Thanks ,
Raj ...Hi,
Your question is not clear, if you are talking about SUS, then SAP designed to use XI for the document transfer.
In SRM middleware is designed mainly for material and service master data transfer.
Hope this will answer your question, let me know if need any further information on XI and middleware related to SRM.
Regards,
Sreedhar Vetcha -
Hello Gurus,
I want to replicate a newly added material in the R/3-backend to SRM/EBP.
Can i know what are the steps that are to be done for doing,..
And also what if i want to change the Material group of a Particular Material
after replicating how.
Thanks in advance.Hi
Which R/3 version are you using ?
<u><b>To set-up a new material replication , please read SAP OSS note 872533.</b></u>
<u>The Steps are -></u>
1)Define sites in the SRM - transaction SMOEAC
2)Maintain entry(objects: Material/service Master) in the R/3 table - CRMRFCPAR using SM30
3)Maintain in ECC in IMG cross apllicaiton products-> Master data Syn -> synchronisation control
4) Define filters in transaction R3AC
The replication of material /service as products will happen by middleware - mdocs
<b>Refer to these link for complete step-by-step details.</b>
http://help.sap.com/saphelp_srm50/helpdata/en/5e/88ef3bc8821d0de10000000a114084/frameset.htm
/people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
Re: REPLICATING MATERIAL MASTER FROM R/3 TO SRM
SRM Middleware Replication - Initial Download Failure
Re: Replication material master of table MARC
Re: Material Replication from R/3 to SRM - Object status stuck in Running
Once the replication parameters are set-up and you triggered the process, you will be able to check queues in SMQ1 and SMQ2 (ECC and SRM). Check RFC queues using transaction SMQ1 and SMQ2. Any other errors noticed in SLG1 and ST22 transactions.
Check in the transaction SMOHQUEUE for any errors / logs. Check your R/3 table CRMCRFCPAR.SRM consumer and queues should use the SRM RFC destination, and CRM one the CRM RFC destination.Also, check the consumer and the RFC destinations.
SMQ2 is an inbound queue. When You are starting replication of Material Master, check outbound queue (SMQ1) on backend system and look for DNL or MATERIAL queue name.
<u>Also Refer to SAP OSS notes 720819 / 681516</u>
<b>Other related configuration links.</b>
Re: Replication Error
Re: Shopping basket errors
SRM Middleware Replication - Initial Download Failure
http://help.sap.com/saphelp_srm50/helpdata/en/55/4af548688211d4977e0004ac962ee6/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/55/4af54b688211d4977e0004ac962ee6/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/05/9b8139437eac2ae10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/69/025f23394c014dbfa64795a6460360/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/29/d586398dcfd74fe10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/5e/88ef3bc8821d0de10000000a114084/frameset.htm
material group replication from R/3 to EBP
Re: Unable to perform Material and Vendor Replication
Re: Specific Material Replication
Hope this will definitely help. Do let me know.
Regards
- Atul -
Hi ,
I am unable to replicate the materials from one backend.
We having 3 backend ( R/3).2 backend working fine, from one back end we unable to do it.seems to be problem with crm middle ware.
Please give me some input.
thanks
hareeshaHi,
To set-up a new material replication , please read SAP OSS note 872533.
The Steps are ->
1)Define sites in the SRM - transaction SMOEAC
2)Maintain entry(objects: Material/service Master) in the R/3 table - CRMRFCPAR using SM30
3)Maintain in ECC in IMG cross apllicaiton products-> Master data Syn -> synchronisation control
4) Define filters in transaction R3AC
The replication of material /service as products will happen by middleware - mdocs
Refer to these link for complete step-by-step details.
http://help.sap.com/saphelp_srm50/helpdata/en/5e/88ef3bc8821d0de10000000a114084/frameset.htm
/people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
Re: REPLICATING MATERIAL MASTER FROM R/3 TO SRM
SRM Middleware Replication - Initial Download Failure
Re: Replication material master of table MARC
Re: Material Replication from R/3 to SRM - Object status stuck in Running
Once the replication parameters are set-up and you triggered the process, you will be able to check queues in SMQ1 and SMQ2 (ECC and SRM). Check RFC queues using transaction SMQ1 and SMQ2. Any other errors noticed in SLG1 and ST22 transactions.
Check in the transaction SMOHQUEUE for any errors / logs. Check your R/3 table CRMCRFCPAR.SRM consumer and queues should use the SRM RFC destination, and CRM one the CRM RFC destination.Also, check the consumer and the RFC destinations.
SMQ2 is an inbound queue. When You are starting replication of Material Master, check outbound queue (SMQ1) on backend system and look for DNL or MATERIAL queue name.
Also Refer to SAP OSS notes 720819 / 681516
Other related configuration links.
Re: Replication Error
Re: Shopping basket errors
SRM Middleware Replication - Initial Download Failure
http://help.sap.com/saphelp_srm50/helpdata/en/55/4af548688211d4977e0004ac962ee6/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/55/4af54b688211d4977e0004ac962ee6/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/05/9b8139437eac2ae10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/69/025f23394c014dbfa64795a6460360/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/29/d586398dcfd74fe10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/5e/88ef3bc8821d0de10000000a114084/frameset.htm
material group replication from R/3 to EBP
Re: Unable to perform Material and Vendor Replication
Re: Specific Material Replication
BR,
Vijay Mittal
(Plz award the points for help) -
USE OF CRM MIDDLEWARE AND XI in SRM LANDSCAPE
Hello All,
Please Can anyone tell me for communicating between SRM and different systems within a landscape,how do we recognise whether to opt for XI or CRM middleware
(Of SRM)???
Please Help.
Thanks,
Disha.Hy Disha,
The different communication methods from SRM are:
1 CRM Middleware
This is only used for Master Data replication (init) with SAP Backends, and for Product master for init and delta uploads.
You can define your own BDocs for your needs (non easy way)
2 RFC
This is used for R/3 backend document creation (Reservation, PR and PO) in classic and extended scenarios, and for several checks in the SC creation
3 ALE/IDOCs
This is used for Good receipt and Invoice creation in R/3 in Classic and Extended scenario
4 XI
It is used for SUS integration, CCM upload and publishing scenarios, and PO send scenarios.
Regards.
Vadim -
In middleware why we give RFC destination as CRM and consumer as SRM?
Hi friends
In middleware why we give RFC destination as CRM and consumer as SRM
Regards
VinnyHi,
As Michaels said SRM and CRM are developed on same base and even still now if you go and check some tables u will find dataelements and others with CRM extension.
Regards
Anil -
SRM 7.0 - CRM middleware settigns for material replication
Hello SRM Guru's
Can you please provide me detail step by step process of CRM middleware settings for material replication from ECC 6.0 SRM 7.0?
Thanks.
Regards,
Magesh.Hi,
Configuration Guides are available in SAP Solution Manager Server. Downloaded offline version is also available in SAP Service Marketplace. http://service.sap.com/srm-inst
Please check a good blog by Marcin Gajewski. /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
SDN has search functions. You can find solutions for your issue.
Regards,
Masa -
Middleware issue: can see the object queue in SRM on T Code - SMQ1
Hi Jennifer,
Can you double click on the SYSFAIL queue entry and update the detailed error?
Regards,
NikhilHi Jennifer,
This is a very generic dump which could have occured due to multiple reasons.
Can you check if you face the same issues while replicating other queues too (PROD0/PROD1 etc)
Regards,
Nikhil -
Doubt in Middleware configuration setting in transaction code - smoeac
Hi,
For your information this is a new SRM 7.0 installation and I am connecting to a existing ECC system.
I have performed all the step metioned in SAP Note: 720819 for middleware configuration in SRM system. Bit confused about the setting in Transaction code - SMOEAC. I have done following step in transaction code - SMOEAC.
1. Created a new site type R/3
2. I have mentioned RFC connection name (RFC connection from SRM to ECC) in 'Site Attributes'.
3. System showed correct Logical system name When I clicked on 'Get value' option.
For your kind information, a site type CRM exist in the system without any data in 'Site Attributes'. We have not define the CRM site. It come while install the new SRM server.
My question, apart from the above setting. do I need to define enter any data for the site type CRM in SMOEAC?
Thanks in advance,
Regds,
Jennifer
Edited by: Jennifer Batty on Aug 15, 2011 2:34 PMHi Jennifer,
Apart from the note, you should refer http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/5728. [original link is broken] [original link is broken] [original link is broken]
Regards,
Nikhil -
Issue with PO Response in SRM 7.0
Hi Experts,
We have upgraded our system from SRM 4.0 to 7.0. Post upgrade we are facing an issue with PO Response document.
Scenario:
When the PO is ordred, Vendor sends a the PO response through XML. Our middleware call the an FM which uses BBP_PD_POC_CREATE to create the PO response(BUS2209) with acceptance status.
Problem:
The status of the PO response is always + In Process+. But in SRM 4,0 we are having the responce with accepted status.
Could you please throw somw light on this.
Thanks in Advance,
Vishnu ReddyThere is this note that might help you.
Note 1393346 - PCO:Header status is open, even all items in PCO accepted
Although a relatively new note, this note is only relevant for SRM5.0 at the moment. What I'd suggest you do is to (temporarily) modify the standard code (in your development or test system) based on the correction instruction of this note. If it resolves your problem, create an OSS mesasge to SAP and ask them to upport the note to SRM7.0. Then you could reverse your modification back to standard and apply the note officially. -
ECC 6.0 Integration with BI,CRM,SRM
Hi All,
What are the perequisites for Integration of ECC 6.0 with JAVA Stack (BI,CRM, SRM).
I suppose we can use PI as a middleware between ECC 6.0 and BI, CRM, SRM, But Please make understand the entire flow how we will achieve this and how it works physicaly.
And, What information ABAP and JAVA stack holds, How we can Install ABAP & JAVA Stack and what purpose it solves.
Please share your valuable inputs with me as I would like to have clear understanding of It.
Thanks in Advance,
VBHi Vikas,
Please have a look at http://help.sap.com/saphelp_ep50sp2/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/content.htm
Hope it will helps
Regards
Arun -
SRM PR is not getting created in ECC backend
Hello Experts,
We are running SRM 7.0 with SRM-MDM Catalog, we are using SRM for shopping. We do have PI 7.11 running in the Environment as well.
We are on ECC 6.0 with Ehp 4.0
Purchase Order:
However we can see the PO creating successfully using PI.
Question, in the SRM table (BBP_FUNCTION_MAP), we see the object type: BUS2012 for ERP 4.0 has adapter name: /SAPSRM/CL_SOA_ADPT_PO_CRT_ERP for when creating PO. Please see teh screen shot.
is this the reason that we need PI?
Purchase Requisition:
PR Creation is not working:
PR is not getting created in the ERP, PR uses Object type: BUS2105, Adpater CL_BBP_BS_ADAPTER_RQ_CRT_470 for ERP 4.0 System type, can you please tell me if the adapter is correct for ERP 4.0 system type?
I also have a question to ask:
1) Where did you see that PR/PO was send to PI System (PI1)? My understanding is that since ERP amd SRM are 2 ABAP Systems, why we cannot send the PR/PO directly to ERP system from SRM? Why do we need a middleware(PI) in between for this process? We should be able to USE BAPI function to do it correct?
Please advice.
Thanks
Kumaryes, i could see a PR number with all this additional details as below.
Table BBP_PDBEI
CLIENT 453 Client
GUID 4CAEFA58EB9D005CE1008000AC1C2031 Globally Unique identifier
BE_LOG_SYSTEM QA1400 Logical System of Logistics Backend
BE_OBJ_ITEM Follow-On Object Item in Back-End System
BE_OBJECT_TYPE BUS2105 Follow-On Document Object Type in Back-End System
BE_OBJECT_ID 2000000167 Follow-On Document Object ID in Back-End System
BE_REFOBJ_TYPE Reference Object Type in Back-End System
BE_REFOBJ Reference Object in Back-End System
BE_REFOBJ_ITEM Reference Object Item in Back-End System
BE_REFOBJ_SBITM Reference Object Sub-Position in Backend System
BE_REFOBJ_TYPE2 Reference Object Type in Back-End System
BE_REFOBJ2 Reference Object in Back-End System
BE_REFOBJ_ITEM2 Reference Object Item in Back-End System
BE_REFOBJ_FYEAR2 0000 Reference Document Object - Fiscal Year in Back-End System
BE_STGE_LOC Storage location
BE_PLANT 2016 Plant
BE_BATCH Batch Number
BE_VAL_TYPE Valuation type
BE_MOVE_REAS 0000 Reason for Movement
BE_EXPERYDATE 00000000 Shelf Life Expiration Date
BE_PUR_GROUP 206 Purchasing group
BE_PUR_ORG 2000 Purchasing organization
BE_CO_CODE 2000 Company Code
BE_DOC_TYPE CLRQ Purchase Requisition Document Type
BE_ACCREQUIRED Account Assignment for Logical Backend Required
BE_SP_STK_IND Key for Special Stock Section
BE_INFO_REC Number of purchasing info record
BE_MOVE_TYPE 201 Movement type (inventory management)
BE_PACKNO 0000000000 Package number
BE_INTROW 0000000000 Internal line number for limits
BE_ITEM_TEXT Short Text of a Service Purchase Order Item
BE_PO_PRICE 1 Price from Backend
BE_UNLOAD_PT 200 Unloading Point in Backend
BE_DEL_IND Deletion Indicator in Backend Documents
BE_TRACKING_NO Requirement Tracking Number
BE_COND_TYPE Condition Key
BE_COND_STEP 000 Level Number
BE_COND_COUNTER 00 Condition counter -
Issue in Material Master data replication in SRM 7.13
Hi All,
We have implemented SRM 7.13 and facing an issue in material mater data delta replication.When we create a new material in ECC it does not get replicated to SRM and gives the ERROR 'Specify the relevant unit of length' and 'Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT.' in SMW01.
But when changes are done to the same material in ECC it gets repicated without any issues.
Please provide your help to reolve this issue.
Thanks,
AnkurHi Ankur
Check your settings in CUNI transaction which UOM is this happening for or for all ?
You should go to that and check what are the conversion values maintained As seen below
In CUNI transaction go to utlilties > Adjustment select your R/3 system and click on Check mark
Also replicate the UOM from backend . By going to R3AS and fill DNL_CUST_BASIS3 and execute
Lastly go to Table T006 and T006A and click on Check table ...
Doing this would sync your UOM with that of ECC and ideally the error should vanish if not
share the screenshots
You can solve the errors mentioned above by implementing the following notes:
Call transaction SE16, enter SMOFAPPL, and set entry EBP.
Check the notes as below
520227 - Set type CRMM_PR_TAX (implement manually!)
720819 - Consumer entries
428989 - Filtering irrelevant data (for example, Sales and Distribution) Example: see attachment mod.txt.
675101 - Execute report: COM_CATEGORY_TRANSPORT
Note 872533 - FAQ: Middleware
Note 402591 - Download Customizing object DNL_CUST_BASIS3
Note 1609476 - Error loading tables DNL_CUST_PRICE and DNL_CUST_BASIS3 from ERP.
Note 393939 - Table TCURX is not downloaded from R/3 System
Note 1038966 - Entries missing in TCURX after load of DNL_CUST_BASIS3
Also refer to these who faced similar issue as yours
http://scn.sap.com/thread/1769891
http://scn.sap.com/thread/1355188
Maybe you are looking for
-
I have loaded Acrobat 8 on a new laptop. On any document that I want to convert to pdf and select "print to Acrobat PDF" nothing happens. It is showing as a printer under "devices and printers." Had no problem using same version on former laptop.
-
Self Extracting Archives not working?
I downloaded a file that comes as a .sea (self extracting archive). Rumor has it I'm supposed to double click it to extract, but when I do, OS X asks me what program I want to use. The exact same file just opens on my friend's machine running Tiger,
-
Missing pictures in iPhoto feed
I went away on vacation and posted photos on a feed. When I came home and opened my iPhoto, the pictures in the feed are not there. I posted a photo as a test today and it went through to the feed ok. I tried restarting my computer, checking my setti
-
adding music from cd
-
I am trying to enter the redemption code for my photoshop elements 13 and have one set that has a O with a slash through it and I have no idea what to enter