SRM, Netweaver installation on HP-UX 11i

Hi All,
In our company, we are going to implement SRM server 5.5. So, in our landscape we are going to install SRM, XI, BW and EP on a single server.
My question is if in a single server we install all the applications, what about the hostname. Will it be same for all the systems or it can be different?
Can anyone explain how to go about on this, as i am new to HP-UX environment.
Thanks in advance,
Sailesh K

Hello Sailesh,
It's possible to have with multiple hostnames on single server with HP-UX Virtual Partitions (vPars)
The vPars (Virtual Partitions) product allows you to run multiple instances of HP-UX simultaneously on one hard partition by dividing the hard partition further into virtual partitions.
Each virtual partition is assigned its own subset of hardware, runs a separate instance of HP-UX, and hosts its own set of applications. Because each HP-UX instance is isolated from all other instances, vPars provides application and OS (Operating System) fault isolation.
Each instance of HP-UX can be of a different release, have different patches, and have a different kernel.
Regards,
Ammey Kesarkar
<i>'Award points for useful info'</i>

Similar Messages

SRM MDM Installation

Hi,
I am new For SRM MDM
Regarding SRM MDM< installation i need some help
1) Is SRM MDM is inbuilt in the SRM 7.0 or we need to install seperately
2) In the installation manual it is given that we need to install SAP netviewer JAVA AS is this SRM JAVA AS or do we need seperate SAP Netviewer JAVA AS
3) I have seen that in the market place MDM installaions available under SRM 7.0, and if i run installation.exe i can find two options(Oracle ) a) MDM b) SRM MDM which one i have to select to install SRM MDM or this is not required
4) In market place under Netviewer MDM there is a SRM MDM installables in this i can find
a) MDM servers installables
b)MDM Import manger
c)etc..
is above installable are sufficient to run SRM MDM after installing SRM 7.0 or any other components required
5) Do we need to install Orcale for SRM MDM also if yes how to connect to SRM MDM
Thx
Jai

Hi ,
1.What to download from service marketplace?
Install the SRM MDM catalog 2.0 business content.This contains a separate MDM server,GUIs ,a2a file,sca files .
2. Where to install?
Install MDM server and GUI.Aprt from MDM and SRM server we need to have WebAS.
3. What all other configuration/setup needs to be done?
Unarchive the SRM MDM repository(.a2a file)
create roles ,users and fields in that.Load it.
Import the data .
check the data in data manager.
Side by side u need to deploy the sca files on WebAS.
on SRM side EBP configuration to be done (define external webservices)
Also assign the catalog to users in SRM
then using the URL
http://J2EE server:port/SRM-MDM/SRM_MDM do the OCI mappings
then u can see the MDM catalog in SRM
U can refer note 1057316
Regards
Nisha

Central NetWeaver Installation and DB Instance on same host?

HI all,
Would like to ask a question about NetWeaver installation.
If I choose central installation, means Central Service Instance, DB Instance and Central Instance will be on the same host, but can my DB, say SQL Server reside on separate host?
If not, is it correct that I have to choose distributed installation? So if distributed installation, can I install Central Service instance and Central intance on one host, and DB instance and SQL Server on another host?
Thanks,
Kelvin

Hi KL:
You can get this answer directly from the Installation Guides.
You can download the installation guides for NetWeaver under: https://service.sap.com/instguides
Hope this helps!
Regards,
Federico G. Babelis
NetWeaver Certified Consultant
http://www.gazum.com

NetWeaver Installation SAPgui 7.30 problem

Hi,
we are not able to installa SAPgui from NetWeaver Installation... with manual installation works fine.
Have you got any idea?
Logic error: BaseVersion=2114 > Version=901 in component $SAPWUS Configurations ({41D37BB1-B482-41BC-A1A4-B3662A55A021})
09:35:54 NwSapsAtlC 1E Server Path C:\Program Files (x86)\SAP\SAPsetup\Setup could not be found: Error message: Impossibile trovare il file specificato. Error code 0x00000002 (2).
09:35:54 NwSapsAtlC 1   Reboot Manager: Evaluated the position of SAPSetup's OnReboot Installation Service as:
                          Folder 'C:\Program Files (x86)\SAP\SapSetup\OnRebootSvc'
                          Service File Path: 'C:\Program Files (x86)\SAP\SapSetup\OnRebootSvc\NWSAPSetupOnRebootInstSvc.exe'
09:35:55 NwSapsEngn 1E Component '{5C4D15BE-7199-4927-9E63-7A0E0CA207D4}' required on server has definition missing Error message: Dati non validi. Error code 0x0000000d (13).
09:35:55 NwSapSetup 1   Engine execution failure.
12:26:38 NwSapsAtlC 1E Server Path C:\Program Files (x86)\SAP\SAPsetup\Setup could not be found: Error message: Impossibile trovare il file specificato. Error code 0x00000002 (2).
12:26:38 NwSapsAtlC 1   Reboot Manager: Evaluated the position of SAPSetup's OnReboot Installation Service as:
                          Folder 'C:\Program Files (x86)\SAP\SapSetup\OnRebootSvc'
                          Service File Path: 'C:\Program Files (x86)\SAP\SapSetup\OnRebootSvc\NWSAPSetupOnRebootInstSvc.exe'
12:26:38 NwSapsAtlC 1   Reading OnReboot Install Service Configuration from 'C:\Program Files (x86)\SAP\SapSetup\OnRebootSvc'
12:26:40 NwSapsAtlC 1   Collected 1 components from '\\server\SAPISVR\Setup\SapWUSSetup.xml'
12:26:40 NwSapsAtlC 1E Logic error: BaseVersion=2114 > Version=901 in component $SAPWUS Configurations ({41D37BB1-B482-41BC-A1A4-B3662A55A021})
12:26:40 NwSapsAtlC 1E DM: Component Creation in Error
12:26:40 NwSapsAtlC 1   Collected 1 components from '\\server\SAPISVR\Setup\SapWUSShared.xml'
12:26:40 NwSapsAtlC 1
12:26:40 NwSapsAtlC 1   '\\server\SAPISVR\Setup\SapPackageSetup.xml' contains a package named 'FULL-730' that consists of:
12:26:40 NwSapsAtlC 1   FULL-730 (Version 9)
12:26:40 NwSapsEngn 1E Component '{5C4D15BE-7199-4927-9E63-7A0E0CA207D4}' required on server has definition missing Error message: Dati non validi. Error code 0x0000000d (13).

Hi Ganimede,
SAP Setup is complaining about the "SAP Automatic Workstation Update" component because
of the BaseVersion difference between the component $SAPWUS being collected in file SapWusShared.xml and the version of the baseversion of the patch version you used to create your frontend package mismatch. (BaseVersion=2114 > Version=901) This does only work if the original version is not too old.
Please try downloading the NW 7.0 Presentation 7.30 Compilation 3 and migrate your existing server according to note 1266552 (Migrating an Installationserver to a new Compilation)
Compilation DVD 3 is available at [service.sap.com/installations]
-> Entry by Application Group
-> SAP Frontend Components
-> SAP GUI FOR WINDOWS
Then recreate your package.
Kind regards,
Eric

Patches List for Installation of Lanaguage for 11i and R12

Kindlly let me know metalink notes ID for Patches List for Installation of Lanaguages for 11i and R12.

Hi,
Please refer to these docs.
Oracle Applications NLS Release Notes, Release 11i (11.5.10.2) [ID 316804.1]
Oracle Applications NLS Release Notes, Release 12.1 [ID 788053.1]
Requesting Translation Synchronization Patches [ID 252422.1]
How To Get The Guidelines To Install or Add the new NLS Language on E-Business Suite 11i or R12 ? [ID 1254325.1]
How to resolve NLS translation issues in an Ebusiness Suite 11i and R12 environment [ID 394112.1]
NLS Frequently Asked Questions [ID 399789.1]
Thanks,
Hussein

New Netweaver Installation

Hi,
I have newly installed SAP Netweaver Composition Environment CE 7.1 in our SAP landscape.
We do not have prior SAP Netweaver Installation in SAP License Keys - installation overview.
Please let me know how to add SAP Netweaver installation name for our customer number in
installation overview in support portal.
Regards,
Sandeep.

Hi. Go to http://service.sap.com/licensekey and in left corner read the Documentation,Learning MAP, Frequently Asked Questions. Regards.
Edited by: Sergo Beradze on Mar 23, 2008 4:11 PM

MDM Server : NetWeaver installation is not necessary?

I have been assigned in a project which will require the usage of MDM for ironing data information between our Siebel and SAP system. I have got the information that in order to install MDM server, NetWeaver installation is not necessary.
I guess this is correct but from your experience, is it also recommended?
The installation will be on Linux with ORACLE DB.
Thanks in advance,
Loukas

Hi Loukas,
if you want to use MDM, you (at least) need:
- a Database Server, Oracle is fine
- the MDM Server
- MDM Console for Repository maintenance
- MDM DataManager for viewing data
- MDM ImportManager for importing data
- MDM Syndicator for exporting data
You definitely do not need the whole Netweaver stuff - no application server or anything like that. However, if you want to integrate MDM into your system landscape, SAP XI is recommended to act a a message broker between any system and MDM. I don't know the requirements of XI.
You can run MDM Server on a single machine, together with the database and all the client tools can be on different machines.
I hope this helps. If you need further information, we'd need a more specific desciption of the requirements.
Best regards,
Martin

Error in Java deployment step of SAP Netweaver installation

Hi Team,
We are installing SAP Netweaver 7.4 SR2.
We are using How to install SAP NetWeaver Application Server Java guide.
We have completed all steps upto step 27 without much hiccups, but during Java deploy stage, we are getting errors related to port 50004.
We have restarted the machine and continued the installation .but are still getting the error.
We have checked the heap size -- Its value is 1024mb.
Do not know what is wrong with this.
We have assigned 4 GB Ram and Paging is also set as per requirement. Previously we had used 3.5 GB RAM
Attaching the log files:
In deploy_api.0 log file we are getting lots of messages as:
Mar 20, 2015 4:09:29 PM Error:
Mar 20, 2015 4:09:29 PM Error: com.sap.ASJ.dpl_api.001260 Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [SMDDev:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
Mar 20, 2015 4:09:29 PM Info: com.sap.ASJ.dpl_api.001263 Destroy command:[deploy]
Mar 20, 2015 4:31:55 PM Info: com.sap.ASJ.dpl_api.001257 Log file is [C:\Program Files\sapinst_instdir\NW740SR2\MSS\INSTALL\STD\log\dc_log\deploy_api.0.log]
Mar 20, 2015 4:31:55 PM Info: com.sap.ASJ.dpl_api.001258 Trace file is [C:\Program Files\sapinst_instdir\NW740SR2\MSS\INSTALL\STD\log\dc_log\deploy_api.0.trc]
Mar 20, 2015 4:31:55 PM Info: com.sap.ASJ.dpl_api.001259 Init command:[deploy]
Mar 20, 2015 4:32:07 PM Error: com.sap.ASJ.dpl_api.001224 Could not establish connection to AS Java on [SMDDev:50004]. Cannot establish connection with any of the available profiles:
url=SMDDev:50004 protocol=p4 (None); Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 172.16.35.110 and port: 50004
Check if server is started, access point for the protocol is available, and IP/Host name is accessible on network.. Check if the host and port specified are correct and AS Java is up and running.
Mar 20, 2015 4:32:08 PM Error:
Mar 20, 2015 4:32:08 PM Error: com.sap.ASJ.dpl_api.001260 Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [SMDDev:50004]. Cannot establish connection with any of the available profiles:
url=SMDDev:50004 protocol=p4 (None); Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 172.16.35.110 and port: 50004
Check if server is started, access point for the protocol is available, and IP/Host name is accessible on network.. Check if the host and port specified are correct and AS Java is up and running.
Mar 20, 2015 4:32:08 PM Info: com.sap.ASJ.dpl_api.001263 Destroy command:[deploy]

Hi Suraj,
Hope you are doing good.
Nice to hear from you again. It looks like P4 connection is affected:
1)
Review note 1158626 and adjust the P4 port configuration accordingly. You will need to check whether the P4 port is available. Note 1925352 will help you to check this (you can use the sapcontrol command or others mentioned to check whether host: 172.16.35.110 and port: 50004 is available or not).
2)
Make sure that there are no invalid profile files. Kindly move the profile files that are old to some other location.
3)
Also, please verify that you don't have any non-deterministic names in the etc/hosts file, per SAP note:
1134222 - Cannot access AS Java via P4 connection
Hope this helps.
Kind Regards,
Hemanth
SAP AGS

SRM 7.0 and SRM MDM Installation query

Hi,
I have installed Both AS ABAP and AS JAVA Stack separately and going forward I need to know
1) Do I need to install any other servers other than this like EP and PI etc?
2) I also wanted to install SRM MDM, for that I have gone through some documents and threads and found that
Prerequisites
1. SRM Server- Installed with ORACLE database
2) For SRM MDM
Ø        Download the SRM-MDM Catalog 2.0 installable from Market Place-- Done
Ø         Install the MDM Server and other GUI Clients--Done
Ø     UnArchive the SRM-MDM repository available with the installables only
                     Need help for
             . Not able to find DBMS server
             . User
               . Password for DBMS setting
Ø      Deploy the two SCA files - MDMJavaAPI and SRMMDMCAT on WAS and restart the Portal- Done
Ø        Access the Config UI by using the URL http://:/SRM-MDM/SRM_MDM and change the layout as per the requirement. In this you can specify the fields to be displayed for Search, type of UI etc for the particular user
. Where I can get the "Port"
Will follow the below steps once the above issues are resolved
*Create the Web Service in SRM system and specify all the required
parameters. You should get the SRM-MDM configuration guide from Market
Place.
*Change the Org Plan in SRM to assign the Catalog to the SRM users.
*Login into EBP and select SHOP, you should get the SRM-MDM Catalog link
if all the configurations are there in place.)
3. Web Application Server
> Is seperate WAS required even after installing SRM AS JAVA stack, if yes what to install
       4) In the market place I have found that SRM MDM install.exe and in that there are two options to execute. Install MDM
           . Install SRM MDM
          Do I need to install both or only one or is this not required, if I install SRM MDM my question is what is the use of
          the above point 2 steps process this one
         Thanks,
          Jairaj
Edited by: M Jairaj on Feb 3, 2010 3:43 PM

Hi,
> I have installed Both AS ABAP and AS JAVA Stack separately and going forward I need to know
>
> 1) Do I need to install any other servers other than this like EP and PI etc?
>
As you have already installed Java stack then it will be your EP. You don't need PI for SRM MDM.
> 2) I also wanted to install SRM MDM, for that I have gone through some documents and threads and found that
>
>                      Need help for
>
>              . Not able to find DBMS server
The DBMS Server property defines the network identification string of the DBMS instance / machine / server that is used by the DBMSspecific client on the MDM Server machine to connect to the DBMS. The brand of DBMS on which the repository is running is shown in the DBMS Type property.
NOTE ►► When you mount two MDM repositories with the same name (but located on different DBMS Servers) on the same MDM Server, MDM distinguishes them in the Console Hierarchy pane by appending the name of the DBMS Server in angular brackets to the repository name (e.g. u201Crepository <server>u201D).
>              . User
>                . Password for DBMS setting
>
ent. In this you can specify the fields to be displayed for Search, type of UI etc for the particular       user
>
>       . Where I can get the "Port"
>
Note 1414670 - MDM 7.1: Adjusting MDS port in MDIS and MDSS ini files
Check SAP Note 1077701 - SRM-MDM Catalog - FAQ
>        4) In the market place I have found that SRM MDM install.exe and in that there are two options to execute. Install MDM
>            . Install SRM MDM
>
Check installation guide for this.
Thanks
Sunny

SRM MDM Installation Problem (.a2a file Unarchive issue)

Hi All,
I am totally new for SRM MDM, and need to install SRM MDM and configure the system.
Below are the steps what i have done till up to
Already SRM 5.0 Installed
Installed Oracle 10g ( with diffrent Oracle SID as I have already one Oracle installed for SRM)
1) Installed MDMServer- Version.5.5.41.70.exe
2) Installed SAP MDM Console
3) Installed SAP MDM Data manager
4) Installed SAP MDM Import manager
5) Copied .a2a file in -Program Files\SAP MDM 5.5\SERVERS/Archive
Could you please explain....
1) How to deploy MDMJAVAAPI05_1.sca and SRMMDMCAT01_0.sca in the SAP WAS
Not able find "RemoteGui.bat" or "Configtool.bat" in Program Files\SAP MDM 5.5 but I can find these files in SRM
G:\usr\sap\ECC\DVEBMGS04\SDM\program\RemoteGui.bat and
G:\usr\sap\ECC\DVEBMGS04\j2ee\configtool\configtool.bat
2) How to Unarchive the SRMMDMCAT01_0.sca in MDM Console
In fact I am not getting any User folder under "Program Files\SAP MDM 5.5 "
Thanks
jairaj

Hi,
1. Deploy MDMJAVAAPI05_1.sca and SRMMDMCAT01_0.sca in the SAP WAS using SDM.
For more information about installation and Configuration please refer SAP Note # 1057316
2. to unarchive repository steps are follows:
     1. copy .a2a file in the archive directory of MDM server
      2. open console and mount MDM server.
      3. right click on server and select unarchive repository. provide the DBMS connection details and Repository Name and specify the .a2a file. then click ok. This will unarchive your repository. For more details please refer to console reference guide.
kindly let us know if you have any query.
Regards,
SHiv

SRM MDM Installation error :MDM Console Install.exe-Bad Image

Hi,
I have installed SRM 5.5 and need to install SRM MDM, but when i am trying to execute MDMConsole Install from GUI _CLIENTS folder getting below error.
:MDM Console Install.exe-Bad Image
The application or DLL C :\windows\~GLC0000.TMP is not a valid windows Image, Please check this against your installation deskette
I tried to execute other installables also getting same error
Please advice is something is missing
Thanks,
Jai

Thanks to all,
Downloaded the installable from maket place and it works now.
I think I tried 64 bit setup earlier
Regards,
Jai

SRM-MDM installation on Unix OS

Hi Gurus,
We are facing some problems in installing MDM Server on Unix machine. I have downloaded the SRM-MDM Catalog 2.0 content from market place. It contains the folder Master_Data_Server and two .tar files. We are not getting the ...VM.bin file specified in the Installation Guide after using untar command.
Your inputs are highly appreciated.
Thanks,
Jitesh Talreja

Hi Jitesh,
did you try an older version of SRM-MDM 2.0, whether the file is contained there? I could not find anything about it in any guide.
We had a message about a file javavm.tar (if I remember right), which was missing during installation of Web AS under Windows. However, this file was eventually not required.
Christian

SRM IDES Installation

Hi Friends,
   I'm trying to install IDES SRM 5.0 SR2. I have downloaded all the Export CDs from SAP Marketplace. Now I'm unable to locate the Installation Master for SRM IDES.
   I could locate the "BS-Installation-Master DVD" but the readme in Export CDs says that "Due to the fact that the IDES Export-Data is stored on 2 DVDs a
special IDES Installation-Master DVD is required. Do not use the Standard BS-Installation-Master DVD."
   Please help me in finding a solution.
Regards,
Deva.

Hi Deva
Where can find IDES, were in SAP marketplace?
Thanks
Nilson

SAP Strategy management and Netweaver installation

Hi experts,
i want to install SAP strategy management 10.0 on windows for SQL Server. I was reading through the installation guide and one of its prerequisite is to install netweaver and also deploying FCP and other components.
Below is the files i downloaded but i dont get any file to install. There's no installation files after extracting the downloaded files. Also i dont know where to get the JSPM to deploy the SCA components.
Urgent Help on how to get this installations done successfully will be appreciated with possibly screenshots.
Regards
Justice

Hi Les Smith,
Thanks for the reply. I also want to Know the software i am downloading whether they are the right ones? which of the netweaver should i download?
The EHP1 or just the normal Netweaver?
The normal one does not have any installation file.
Please help me on that too.

Error in Netweaver Installation

Hello all,
I am installing Netweaver CE 7.1 in Windows 2003. Out of the 35 phases , i am getting an error in the 13th phase. The name of the Phase is " Create Database Instance" . An error log is created and the details are as below :
> Subprocess starts at 20091014155346
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n SGPSRV011 -d SMD -u CONTROL,******** db_start
Execute Session Command : exit
> Subprocess stops at 20091014155349
> Subprocess call failed
ERR
-24994,ERR_RTE: Runtime environment error
1,'SMD' has stopped unexpectedly, (view 'Application Event Log') (OS error code 11000)
This is the text of the error being displayed :
An error occurred while processing service SAP NetWeaver CE Productive Edition > Installation Options > Standard System > Standard System. You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CE71_PROD_ADA/INSTALL/ADA/STD/AS.
I feel that this error has something to do with the settings in the MaxDB database. Can you please help which setting needs to be changed ? Both the Netweaver and the MaxDB are on the same 64-bit Itanium server and the OS is Windows 2003.
Thanks and Regards
Vijay

Dear Bob ,
I was able to resolve this error. It is a RAM issue. I just increased the page file size and shut down the other processes in the server. It worked and i was able to install Netweaver....
Thanks,
Vijay

SRM, Netweaver installation on HP-UX 11i

Similar Messages

Maybe you are looking for