SRM on One client with ERP

Hi,
My Client is currently using SAP ECC MM for Procure to Payment process. We are currently evaluating option for implementing SRM 7.0 for web base procurement solution. As per the information available in www.service.sap.com, there is a software called u2018SAP SRM on one client with SAP ERPu2019 available at this moment. I have following doubts regarding SRM on one client system:
1. As I mention, currently we are using SAP ECC. Does the u2018SRM one client softwareu2019 component will install on the top of our
    existing ECC system in the same server if we will implement SRM one client system ?
2. Normal SRM 7.0 connect to ECC through RFC connection. As SRM and ECC are on the same client. Does it mean we don't
    required RFC connection for SRM one client system?
3. In one client SRM system, SRM can be install on the top of existing ECC system. Does it mean, additional hardware
    components like server, network etc are not are not required for SRM one client system ? We can use the existing ECC server
    and network for SRM.
Thanks in advance.
Regds,
Jennifer

Hi Jeniifer,
I tried providing information to your queries below in bold. Hope it is of any help to you.
1. As I mention, currently we are using SAP ECC. Does the u2018SRM one client softwareu2019 component will install on the top of our
existing ECC system in the same server if we will implement SRM one client system ? - *Yes. SRM will get installed in the same server.*
2. Normal SRM 7.0 connect to ECC through RFC connection. As SRM and ECC are on the same client. Does it mean we don't
required RFC connection for SRM one client system? - RFC connection will still be required but since it's same client, the connectivity and data transfer will be very fast and quick.
3. In one client SRM system, SRM can be install on the top of existing ECC system. Does it mean, additional hardware
components like server, network etc are not are not required for SRM one client system ? We can use the existing ECC server
and network for SRM. - Yes you can use existing ECC server.
This SRM one client software will be very useful in case of a small industry or business, which does not have huge data or processing. But in case your organisation is bigger, then this will not be very useful.
To find out possibility of usage of SRM one client software, I would suggest you to get in touch with SAP sales team and they will arrange for a meet to discuss it further.
Cheers,
Ravi

Similar Messages

Advantages and disadvantages for SRM on one client with ECC

Dear SAP gurus,
We are evaluating the use of SRM on one client with ECC. Is there a paper spesifally discuss the advantage and disadvantages of having this deployment option?
Best regards,
John

Hi
check this link
SRM Server as an Add on to ERP 2005
Advantages
1) one backend for SRM and ECC6.0
Disadvantage
1.Sourcing scenario cannot be implemented.
2.It does not support multiple backend system.
Regards
G.Ganesh Kumar

SRM "one-client" installation on ECC 6.0 EhP: Own client needed for SRM?

Hello experts,
i've a question concerning the SRM "one-client" installation on ECC 6.0 EhP4 as Add-On.
Is it possible to use SRM and ERP funtionality in a single client e.g. 001?
Or do we have to use different clients on the system like for SUS?
I haven't found any information regarding this topic in SAP ressources. I'm currently using CG "SAP SRM on One Client in
SAP ERP" Release date 2008 (found on marketplace/srm-inst --> srm7.0); SRM - Technical Basis Configuration (BuildingBlock S00/S03). I'm facing problems while going through the following customizing steps:
Assign logical System to Client [both logicall systems are on the same client (001)] ==> error while trying to reference the second logical sys. because client (001) cannot be used again (own presumption: error message differs)
I've seen that some of you have successfully installed and customized this szenario. If someone could provide me any helpful information or guideline how to proceed in general... would be great...
Best regards,
PATRICK

Thanks for your reply. I've checked the offline documentation because i've no access to solman.
There is a document which describes the steps for configuring one-client customizing on marketplace.
Link: [SAP SRM 7.0: SAP SRM on One Client with SAP ERP|https://websmp203.sap-ag.de/~sapidb/011000358700001201562009E]
The problem is that its impossible to cofigure the system like it's described in the document.
Let me explain why...
SRM Addon is installed and customizing is done in client 001 (same client as erp)
overview about defined logical systems:
-ONECLNTERP (for ERP is defined)
-ONECLNTEBP (for SRM is defined)
When I try to assign the logical system to client 001 it works for the first entry
for the second log. system it shows up an error message.
-->I assume because client 001 has been already assigned. I cant use client 001 again.
But One-Client szenario schould be possible in a single client or is SAPs One-Client more like One-System with differnet clients for SRM and ERP on the same machine?
Because of the above mentioned problem I assume that it's impossible to run ERP and SRM in the same Client number.
Am I right? Do I have to use two Clients on One System for proper Customizing?
Or if it's possible to use a single client on one machine for both ERP and SRM how is it possible to assign two log. systems to one client number?
I'm totally confused. Any help would be appreciated - any tips/hints/experiences from someone who has customized One-Client?
BR, Patrick

Vendor replication in One client ERP, with SRM 5.0 version

Hi Guys,
Can anyone suggest me how to do the vendor replication in the One client ERP i.e SRM is being on the same stack of the SAP R/3 system. which is set as a one of the node in the SAP R/3 SPRO path. this is in Version 5.0.
Please suggest how to do the Vendor replication in this, whether are there any prerquisties for doing this replication?
The VenMap Table is not getting updated with entries.
Please help me soon.
Regards
Srujan K

Hi
no ranges you need to take care of this if you want to transfer same no range as ECC no range.
slg1 - you can see logs
bucf - no range for vendors
+SAP Implementation Guide
++Cross-application components
+++SAP Business Partner
++++Business Partner
+++++Basic Settings
++++++Number Ranges and Groupings
+++++++Define Number Ranges
+++++++Define Groupings and Assign Number Ranges
sorry. do you want Suggestion ECC as well as SRM in one client?
Master Data Synchronization in mySAP ERP
Purpose
In order for the Supplier Relationship Management (SRM) application to run as add-on in a mySAP ERP environment, it is necessary to synchronize master data objects within this platform, that are similar from a business point of view, yet technically different.
Master data objects on ERP and SRM side that need to be synchronized
ERP (SAP ECC*)
Corresponding object in SRM
Vendor
Business partner
Material/service
Product
Material type/service type
Product category
ECC: Enterprise Core Component
Integration
Master data synchronization in ERP is carried out centrally.
For more information, see: Master Data Synchronization
Once you have set up master data synchronization for your objects using the Synchronization Cockpit, and after initial data synchronization and key mapping has been completed, delta reports that run in the background ensure that master data is always matched.
The individual configuration steps are described in the IMG:
Supplier Relationship Management ® SRM Server ® Master Data ® Master Data Synchronization in mySAP ERP (One Client)
Features
This function ensures that changes (create, change, delete) that are made to objects on one side cause immediate (bidirectional) update to the same objects on the other side. In this way, SRM and ECC data is permanently synchronized.
·         Purchasing organizations are not included in the automatic bidirectional master data synchronization and, as is also the case with mySAP SRM, have to be matched manually or via an update report (ECC -> SRM).
Replication (and the updates) from plant (MM) to business partner location (SRM) only occurs in one direction with the report BBP_LOCATIONS_GET_FROM_SYSTEM that is executed manually.
·         Where SAP Supplier Self-Services (SUS) runs together with mySAP SRM on one ERP platform, master data synchronization occurs as described above. If SUS runs separately of ERP, SAP NetWeaver XI is used to synchronize master data with SRM.
Master Data Synchronization
Purpose
Master data synchronization synchronizes master data objects in an SAP system that are similar from a business, but not from a technical, point of view, and in this way allows you to integrate different SAP applications seamlessly in your business processes.
You can use master data synchronization, for example, to set up integration of the SAP Business Partner with the customer master. This allows you to integrate SAP applications that make technical use of the Business Partner in their user interface, and use the customer master as a technical basis in subsequent business processes.
Implementation Considerations
In order to be able to use master data synchronization, you must have defined and activated Synchronization Control as well as Customer/Vendor Integration and/or Material/Service Integration in Customizing of the Cross-Application Components under Master Data Synchronization.
Pay attention to the following note on master data synchronization terminology:
The paired terms, customer/debtor and supplier/creditor/vendor, are used with the same meaning in master data synchronization, and one term can be substituted synonymously when the documentation is read.
Integration
Master data synchronization is based in particular on the two master data objects SAP Business Partner and SAP Product, and makes it possible for the following synchronization processes, among others, to be carried out:
·        Synchronization of the business partner with the customer/debtor master
·        Synchronization of the business partner with the supplier/creditor master
·        Synchronization of the product with the material master
·        Synchronization of the product with the service master
For a complete list of all synchronization processes that are defined and active in an SAP system, see the synchronization cockpit under Synchronization Processes.
Master data synchronization replaces the current technical solutions for Customer/Vendor Integration and complements some business processes that are based on integration between the product master and the material or service master (Material/Service Integration).
Master data synchronization also has an effect on the archiving processes of the master data objects business partner/customer master /vendor master and product/material master /service master.
For more information on activating/deactivating synchronization processes, see the IMG of the Cross-Application Components under Master Data Synchronization ® Synchronization Control.
Features
Synchronization Directions
A synchronization process is always defined as a one-way synchronization between a source object type and a target object type, meaning that the synchronization is only ever active in one direction, from the source object type to the target object type. If the data of an object instance of the source object type is changed, the corresponding data in the corresponding object instance of the target object type is changed at the same time. Both synchronization directions must be activated in the SAP system in order to allow the undirected synchronization of two master data object types.
Synchronization Scenarios
There are two synchronization scenarios in master data synchronization:
·        Synchronization from the master data maintenance
When you create and save new master data, the system carries out initial synchronization with the master data object types for which synchronization processes have been activated in the SAP system, and creates the corresponding master data.
If you change existing master data that has already been synchronized, the system locks this master data, and all the corresponding master data of the source object type and the target object type during maintenance. When you save the changed master data, the system generally carries out a delta synchronization with the master data object types for which synchronization processes have been activated in the SAP system, and changes the corresponding master data. In some cases, changing existing master data can lead to a delta synchronization having to be carried out.
·        Synchronization using the synchronization cockpit
You use the synchronization cockpit to prepare, perform and check the initial synchronization of master data objects in an SAP system.
Constraints
Master data synchronization can neither synchronize master data objects across systems, nor can it transfer master data objects from external or legacy systems. You can use the SAP external data transfer to transfer legacy or external data.
Synchronization Cockpit
Definition
User interface for master data synchronization in an SAP system.
Use
Using the synchronization cockpit, you can carry out all the steps for master data synchronization in an SAP system These are as follows:
·        Customizing synchronization
·        Selection, preparation and starting of synchronization runs.
·        Monitoring of synchronization runs
·        Postprocessingof synchronization errors
·        You can start the synchronization cockpit in Customizing of the Cross-Application Components under Master Data Synchronization ® Synchronization of Mass Data ® Execute Synchronization Cockpit.
Before you can work with the synchronization cockpit, the following prerequisites must be fulfilled:
·        There are data records for at least one source object in the SAP system.
·        You are authorized to carry out synchronization.
·        You are authorized to start the Postprocessing Office (PPO).
·        You have carried out the Customizing of the master data synchronization.
·        You have carried out the general Customizing for the PPO.
For more information, see the Implementation Guide (IMG) of the Cross Application Components under General Application Functions ® Postprocessing Office.
·        You have activated the writing of PPO orders for the master data objects in Customizing of the master data synchronization.
For more information see the Implementation Guide (IMG) of the Cross-Application Components under Master Data Synchronization ® Synchronization Control ® Activate PPO Orders for Platform Objects in the Dialog.
Structure
The synchronization cockpit is divided into three work areas:
·        Synchronization processes work area
This work area contains a list of the synchronization processes. The list displays only the active synchronization processes, or all the synchronization processes. You can change between the two views at any time.
·        Customizing synchronization work area
This work area contains an overview of all the reports that you can use for the Customizing synchronization.
·        Synchronization work area
This work area contains the tab pages Processing and Monitor, which you can use to prepare or monitor synchronization runs.
Integration
The Postprocessing Office (PPO) is integrated in the synchronization cockpit, so that it can be used to postprocess synchronization errors. If the PPO has not been activated, the synchronization cockpit does not start synchronization in the case of an error, and issues the relevant error message.
br
Muthu

Form settings are not saved on one client

Hello,
What are possible reasons that form settings like size and position are not saved.
I have one client with SBO 8.8 PL15 installed. On this client this settings are not saved.
So the user has to resize the forms everytime he opens it.
I tried it myself with his SBO user directly on the server and a terminal-server. No problems there, all settings
are saved even if i switch between the systems.
If i am correct these settings are saved in the UserPrefs field in the OUSR table.
Any ideas?
Thank you for all your help.

Hi,
Have you searched the forum?
You may check this to start:
User Settings lost after session is released
This setting is related to client.
Thanks,
Gordon

SRM One Client + Portal and MDM system on top of SAP EHP4 system

Hi!
we successfully upgraded SAP ERP 6.0 system to SAP EHP4.
Now we would like to extend the functionality by adding the following components:
- SRM One Client
- Portal and MDM
Question:
1) Can some one explain the procedure to do this?
2 Where can I find the Installation files and documentation?
Any helpful information will be very appreciated

Hi!
Thank you very much for your response!!
My actual situation:
I have a EHP4 for SAP ERP which has only ABAP stack.
Questions
1) Should/must I install a Java-Add In Instance?
a) Is it possible to install a Java Add In Instance for EHP4 ERP system or do I need only a extra/new Windows server for this?
b) what are the must usage scenarios I have to choose for the Java installation (Portal, MDM, PI)?
2) what is the exact installation sequence (SRM One Client, SRM MDM, NW Portal)?
Thank you very much!

SAP/SRM One client approach

Hi all,
Not sure where to put this question.
Can anyone point me in the right direction on finding information on the benefits / risks/issues on a one client approached for SRM?
Or list them here?
Thanks for any info!

Hi!
Thank you very much for your response!!
My actual situation:
I have a EHP4 for SAP ERP which has only ABAP stack.
Questions
1) Should/must I install a Java-Add In Instance?
a) Is it possible to install a Java Add In Instance for EHP4 ERP system or do I need only a extra/new Windows server for this?
b) what are the must usage scenarios I have to choose for the Java installation (Portal, MDM, PI)?
2) what is the exact installation sequence (SRM One Client, SRM MDM, NW Portal)?
Thank you very much!

Copy client with open items FI, stocks MM and balance from one client to

Hi Gurus,
I have a question , I want to copy client with next information:
1.- All Cuztomazing
2.- All master data
3.- Only open items FI-AR , FI-AP,
4.- Stocks MM available for production.
5.- Documents sales valids
6.- Complete Balance (fixed , available and current asset, etc.)
From one client to other client.
¿How can I do it?
I know that cuztomazing and master data it's possible, I need to find from 3 to 6 point if it's possible for copy tables or some trx complete this information.
This work it's because my company code changue NIF and information TAX , and I need to have a cut over for carry forward only the describe information.
Thank's a lot
Regards
Julio

Hi Julio,
How did you solve this? I need to perform exactly these steps.
I am very interested in 3, 4 and 6.
Thanks in advance.

How to control one server with multiple clients via TCP/IP

I am wanting to control a single server with multiple clients. Only one client would be active at a time, so there would be no conflict. I want to use TCP/IP. So far, I have programmed a cluster that passes data back to the server with no problems. The challenge come in when a second client is added to the mix. I have't been able to figure out how to turn each client on and send the appropriate data and then turn it off so it doesn't keep sending the same data to the server.
Here are the things that I have considered and did some preliminary testing, but don't really know how to impliment:
1. Send a numeric on the front of the cluster packet that tells the server that data is on the way.
2. Send a boolean on the front of the cluster packet to somehow turn the server TCP/IP on.
The problem I have found is that LabVIEW TCP/IP doesn't like to be turned on and off. If it doesn't get the data it expects, it goes into a reset mode and that kills the response time.
Any help?

You should consider implementing a set of simple one-byte commands that can be sent back and forth between the Server and the Clients. You can base all of these ideas off the example in the Example Finder under Networking >> TCP and UDP called Multiple Connections - Server.
You will have two loops in the server VI: one to wait for new connections, and one to send and receive data from the existing connections. For instance, after one of the clients connects, it can request control of the server to send data to it by sending the character "R" for request. Every time the send/receive loop of the Server executes, the first thing it can do is to check all the existing connections to see if any of the clients have sent a control request ("R"). If so, it will create a buffer (array) of control requests. This could be in the form of Connection IDs or indexes in the array for a particular Connection ID. Your choice.
After the Server receives a request for contol, if it is not already under control by another client, then it can send a response to the first client on the control request list. For instance, the server could send the first client a "S" command for send. Note that after the clients send their control request, they should execute a TCP Read and wait indefinitely for the server to respond with the one-byte "S" command. Then, once the client in control is finished sending data to the server, it could send the character "X" telling the Server to release it from control.
The example I mentioned above already does a similar thing. Note how when a client wants to disconnect, they send the letter "Q". You can see this in the Multiple Connections - Client VI. The Server then checks each individual connection to see if it's received this one-byte command, and if it has, it closes the connection to the client. This is what you would want to implement, but instead of having just one command, you'll have to distinguish between a few and build up a buffer of control requests.
Finally, if a client does decide to disconnect in your application, they could send the command "Q" just like the example above. At this point, close the connection and remove that Connection ID from the array of connections. You will also have to handle the case that this client was in the request control waiting line when it disconnected, in which case you need to delete it from that array as well.
This will definitely work for you, but it will take some work. Best of luck!
Jarrod S.
National Instruments

Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

Below issue is with only one client in that untrusted domain. So boundary is not the issue.
Env -
mydom.com has SCCM PRI site (MP, DP as well).
Client is in untrusted forest.
Please help.
Thanks
MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteCode:         pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteVersion:      5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="pri"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
    <ADSite Name="Default-First-Site-Name"/>
    <Forest Name="staging.local"/>
    <Domain Name="staging.local"/>
    <IPAddresses>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
    </IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Received header '<Msg SchemaVersion="1.1">
<ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
<SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
<SourceHost>pri1SCCM02</SourceHost>
<TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
PM 4816 (0x12D0)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
This line jumps out at me in the log file though: "An MP exists on this machine".
That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
Jason | http://blog.configmgrftw.com | @jasonsandys

MM SUS on SRM one client

Dear Experts,
Need your help.
We are planning to implement MM SUS on SRM one client.
I have some questions/ doubts before starting the implementation could you please help me to answer them
Do we need PI to have a connection between SRM and MM
because its SRM one client SRM is add-on to ECC I mean on the same server?
b. Do we need to have separate client to implement SUS and
SRM as we generally do in case of separate SRM system ?
Thanks & Regards
Ankit Jain

Hi Ankit,
a, If you are going to use MM-SUS scenario, then XI is a must. Because you will need XI for message exchange for Supplier Self registration,PO Response, ASN, GR , Invoice creation
b, Yes, it is recommeded to implent SUS in a separate client than SRM.
Regards,
Ivy

Integartion with ERP and SRM

Hi,
We are looking for integration of E-sourcing 6.0 with ERP 4.6C and SRM 3.0 with Extended classic scenarion.
Is it possible to do the integration, if not can you suggest how the above scenario can be acheived?
Is it possible to integrate the MDM 2.0?
Regards,
Madhan

Integration between ESO and SRM is a custom solution with help from SAP. We have implemented this recently. However Intergration between ESO and ECC is standard.
Please reach out to SAP for further assistance.
Good Luck

One-time customer with ERP Sales Order

Hello experts,
I am working with ERP Sales Order on SAP CRM 7.0 Ehp3.
We have a requirement to start using 'one-time customer' process. I know there is a standard account groupd (CPD) on ECC side for this purporse.
We would like to enter a sales order for occasional customers, without saving the customer in the master data table.
I would like to have an occasional customer (example nº 1000 which should work like a CPD). I need to enter a sales order for this customer nº 1000, and once I enter nº 1000 on the BP number field, it should bring a Pop-up in order to enter the customer's information (address).
This is working when I create the order via VA01 on ECC side, but the pop-up is not shown when I try to create the order on CRM via erp sales order.
Any suggestions on how to make one-time customer work on ERP sales order? And how to make the pop-up work?
Thanks in advance!
Luis

Thanks a lot, Rene! I have just read this SAP note and confirmed your information.
Do you know of any workaround or development that could be done for this scenario using ERP sales order?
If not, I will suggest using transaction launcher and create this type of order for the one-time customer directly in VA01.
Once again, thanks for replying!
Luis.

SRM one client Contract Management

Dear Experts,
Can we create contracts in SRM one client and distribute them to our ECC system.
Because I seached on service marketplace and no where its mentioned that Contract mangement is possible in SRM one client.
Sourcing is possible that I have checked the functionality. Please reply
Thanks
Ankit Jain

Hi Ivy,
Yes Correct nothing mentioned in the configuration guide or any other document.
But I checked System nodes no where I found that contract management is possible in SRM one client.
Also Note 963000 doesn't say anything about it.
Below link also says its not possible so I am confused even Roles doesn't have Contract Menu
SRM 7.0 one client setup in comparison to SRM 7... | SCN
Regards
Ankit Jain

SRM Addon Upgrade Path with ERP2005 ( ERP 6.0 )

We are on the verge of finalising the implementation of SRM5.0. If we
go on SRM 5.0 add-on path then what is the next upgrade path that is
available with ERP 6.0. We have looked at SAP notes 963000 and 853651
which clearly say that "SRM as add-on is only supported in the release
combination ERP 6.0 and SRM 5.0 and other release combinations are not
supported. Also future SRM release will not run as add-on on ERP 6.0".
We have also looked at other SAP notes 863532, 982871, 1012010, 1012231
for the same issue.
Can we get more details on the upgrade path for SRM add-on that will be available in
future release with ERP 6.0.

Hi,
As you mentioned you have read in notes the SRM as an ADD-ON will no longer be supported by SAP, there are no plans for further and future integration of ERP and SRM directly, it is advisable to implement the SRM_SERVER on it's own and not as an add-on.
Regards,
Jason

SRM on One client with ERP

Similar Messages

Maybe you are looking for