SRM "one-client" installation on ECC 6.0 EhP: Own client needed for SRM?

Hello experts,
i've a question concerning the SRM "one-client" installation on ECC 6.0 EhP4 as Add-On.
Is it possible to use SRM and ERP funtionality in a single client e.g. 001?
Or do we have to use different clients on the system like for SUS?
I haven't found any information regarding this topic in SAP ressources. I'm currently using CG "SAP SRM on One Client in
SAP ERP" Release date 2008 (found on marketplace/srm-inst --> srm7.0); SRM - Technical Basis Configuration (BuildingBlock S00/S03). I'm facing problems while going through the following customizing steps:
Assign logical System to Client [both logicall systems are on the same client (001)] ==> error while trying to reference the second logical sys. because client (001) cannot be used again (own presumption: error message differs)
I've seen that some of you have successfully installed and customized this szenario. If someone could provide me any helpful information or guideline how to proceed in general... would be great...
Best regards,
PATRICK

Thanks for your reply. I've checked the offline documentation because i've no access to solman.
There is a document which describes the steps for configuring one-client customizing on marketplace.
Link: [SAP SRM 7.0: SAP SRM on One Client with SAP ERP|https://websmp203.sap-ag.de/~sapidb/011000358700001201562009E]
The problem is that its impossible to cofigure the system like it's described in the document.
Let me explain why...
SRM Addon is installed and customizing is done in client 001 (same client as erp)
overview about defined logical systems:
-ONECLNTERP (for ERP is defined)
-ONECLNTEBP (for SRM is defined)
When I try to assign the logical system to client 001 it works for the first entry
for the second log. system it shows up an error message.
-->I assume because client 001 has been already assigned. I cant use client 001 again.
But One-Client szenario schould be possible in a single client or is SAPs One-Client more like One-System with differnet clients for SRM and ERP on the same machine?
Because of the above mentioned problem I assume that it's impossible to run ERP and SRM in the same Client number.
Am I right? Do I have to use two Clients on One System for proper Customizing?
Or if it's possible to use a single client on one machine for both ERP and SRM how is it possible to assign two log. systems to one client number?
I'm totally confused. Any help would be appreciated - any tips/hints/experiences from someone who has customized One-Client?
BR, Patrick

Similar Messages

Looking to replace my Mac Pro 2.1 graphics card with one that is silent with at least 2 DVI outputs (needed for audio production), any recommendations?

Looking to replace my Mac Pro 2.1 graphics card with one that is silent with at least 2 DVI outputs (needed for audio production), any recommendations?
Thanks

Thanks, but are these are silent?
Why do they cost over 10 x what seems available for PC?
Is it not possible to flash the cards for mac?
Something similar to a ASUS Geforce 8400GS PCI-E 2.0 512 MB DDR2 Graphics Card EN8400GS Silent/P/512M?

Separate Portal needed for SRM component

Hi,
We are having an EP portal for ESS, MSS scenario.We are also implementing SAP SRM which requires portal as frontend. Just wanted to know whether we can user existing portal(having ESS,MSS) for SRM as frontend?
Please let me know any pros and cons of having separate portal for SRM and not having also.
Thanks and Regards,
Sanjay Patwal

Running SRM with ESS/MSS/BI is not a problem. They are simply different applications running on the same infrastructure.
Your question can also be phrased as 'Should I run on a separate JAVA instance'. Well if you think your ESS/MSS portal is already under strain, then yes putting on SRM will also increase the load unless you scale your portal sizing.
Secondly, some clients like to separate out SRM and ESS/MSS so that there are no interdependencies when it comes to patching. For example you may be patching your SRM ABAP, which will in turn require a patch to SRM Business Package which may in turn require a patch to JAVA engine which may impact ESS Business package. Managing the sp stacks can be a little tricky if you run all your apps on one portal. So you can split them out and federate.
Just some thoughts...I know it doesn't tell you exactly what to do. Essentially it is not a problem...It is a question of strategy. In the past I've used SRM on same portal as ESS/MSS and used the SRM JAVA Portal for external users.
Regards
Mr.T

Installation of ECC 6.0 EHP 6 IDES

Hi Experts,
I want to install ECC EHP 6 on Windows Server 2012 with MSSQL SERVER.
I tried 4 times but didn't get success everytime, system Fails at Import ABAP steps.
I am trying with BD IDES of EHP6.
If possible please explain me the steps from scratch as again I am going to install Fresh on my Machine.
-Regards
Rohit

Hi Rohit
You should clean the system and again start the installation from scratch.
1. Your machine name CAN NOT be more than 13 characters. Otherwise you’ll get an error during installation.
2.increase your virtual memeory.
3.install JDK CORRECT one.
SAP IDES ERP 6.0 EHP4 / NetWeaver 7.01 Installation Guide on Windows 2003 64-bit – Part 2 &laquo; Zieglers

Client-Copy form ecc 6.0 ehp 1 to ecc 6.0 ehp4

Hello Experts,
I would like to copy an entire Client from one system to another but the systems are on different ehp-levels.
The source-system is on ehp1 level while the target-system is on ehp4 level.
Are there any known problems that i should be aware of??
Thanks in advanced
Kalle Eismann

Hello,
I don't this this works. To my mind it's like performnig a client copy between 2 different releases.
The dictionnary should be slightly different so I don't think this works.
Here is a note from SAP about this :
Note 1398718 - CC:INFO-Client copy between different EHP'S
Best regards,
Steve.
Edited by: steve_78 on Sep 26, 2011 2:22 PM

General Understanding SRM as Add-On to ECC 6.0

Since I checked in this forum there is no configuration guide for SRM as Add-On available I have some general problems. Does SRM Add-On as single client installation with ECC 6.0 require replication and download of data objects and do I have to maintain the middleware parameters? If it is like this I understand why tere is no specific configration guide for SRM as Add-On!
In Detail:
When I configure SRM as Add-On do I have to replicate objects like product, product category, customizing (UOM), vendor from the backend as in stand alone implementation?
Do I also have to replicate organizational structure via report from the backend or can I use the organizational structure form the backend directly for the SRM?
Do I have to download the locations from the backend?
Rgds.
Dieter

Hi
ECC 5.0 does not come with EBP or SRM. ECC 6.0 (ERP 2005) comes with SRM Server as an add-on. Only self service procurement and supplier enablement scenarios are supported. Not recommended for sourcing scenarios and multi-backend deployment options.
<u>Please look at http://help.sap.com/erp
Then click on SAP SRM for ERP.
you will find very good documentation here.</u>
<u>Please go through these detailed pointers for more information -></u>
http://help.sap.com/saphelp_srm50/helpdata/en/43/028c9ce2a35158e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/index_srmaddon.htm
What is hub deployment?
Re: SRM as ADD On in ECC6.0
SRM@ERP2005
Re: SAP SRM - ERP INTEGRATION
Re: SAP R/3 MM and Electronic external Catalog
SRM Server as an Add on to ERP 2005
SRM as an add-on to ERP 2005
Hope this will definitely help.
Regards
- Atul

SRM 7.01 with ECC 6.0 EHP 7.0

Hi Guys,
Does anyone have an idea on SRM 7.01 compatibility with ECC 6.0 EHP 7.0. Any things needs to be taken care from SRM side after an upgrade to EHP 7 in ECC side.
Please share your experience.
Thanks for your reply in advance.

Hi Imran,
It is compatible, But still for confirmation please see the product availability matrix.
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/support/pam/pam.html?smpsrv=https%3A%2F%2Fwebsmp203.sap-ag.de#pvnr=01200615320900003495&ts=4&pt=t%7Co
Best regards,
Rohit

Requirements for SRM 2007 (EBP:E-Procurement)?

Hi Guys,
I recently was scheduled to implement the latest release of SRM/E-Procurement to our ERP6.0 Landscape.
Unfortunately, I am pretty new to this topic and everything I know is that the latest release is SRM2007.
Could anybody tell me what exactly needs to be installed?
What packages?
As far as I know, EBP is included into SRM. But is it enough to just install SRM or do I need any additons to run EBP (E-Procurement).
The underlying system is/will be SAP ECC 6.0.
I am really looking forward to your answers
yours
Erik
Edited by: Erik Nagler on May 27, 2008 1:50 PM

SRM 2007 (SRM 6.0 )is still not avilable for general release and ongoing for ramp-up customers only.
The release was due this year but delayed.
For SRM add on installations on ECC
you should see the follow threads
http://help.sap.com/saphelp_erp2005/helpdata/en/index_srmaddon.htm
Re: SRM Addon Upgrade Path with ERP2005 ( ERP 6.0 )
SRM 5.0 as an Add on with ECC 6.0
SRM 5.5 as an add-on on ECC 6.0 vs SAP SRM 5.5 server
BR
Dinesh

Business packages for SRM to implement EP

Hi All,
We are implementing SRM 5.5 in our company. Also, EP 7.0 we are implementing for SRM. Can anyone help me how to get the business packages for SRM and supplier collaboration, as i cant download it from sdn, as it is unrestricted shipment.
Also, how to import these business packages into EP.
Thanks in advance,
Sailesh K

Hiya,
Yann already pointed out where to find the BP for SRM. The Business Package for Supplier Collaboration is also available from the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio">Portal Content Portfolio</a> in the Specialist section. You want to go for the 2.0 release.
Installation:
In SAP NetWeaver 2004s, the portal is installed as a usage type via SAPINST. For installing the Business Package for SRM 5.0, the installation process also goes via SAPINST. Please follow SAP note 883948.
Best regards
Dagmar

Advantages and disadvantages for SRM on one client with ECC

Dear SAP gurus,
We are evaluating the use of SRM on one client with ECC. Is there a paper spesifally discuss the advantage and disadvantages of having this deployment option?
Best regards,
John

Hi
check this link
SRM Server as an Add on to ERP 2005
Advantages
1) one backend for SRM and ECC6.0
Disadvantage
1.Sourcing scenario cannot be implemented.
2.It does not support multiple backend system.
Regards
G.Ganesh Kumar

MM SUS on SRM one client

Dear Experts,
Need your help.
We are planning to implement MM SUS on SRM one client.
I have some questions/ doubts before starting the implementation could you please help me to answer them
Do we need PI to have a connection between SRM and MM
because its SRM one client SRM is add-on to ECC I mean on the same server?
b. Do we need to have separate client to implement SUS and
SRM as we generally do in case of separate SRM system ?
Thanks & Regards
Ankit Jain

Hi Ankit,
a, If you are going to use MM-SUS scenario, then XI is a must. Because you will need XI for message exchange for Supplier Self registration,PO Response, ASN, GR , Invoice creation
b, Yes, it is recommeded to implent SUS in a separate client than SRM.
Regards,
Ivy

SRM One Client + Portal and MDM system on top of SAP EHP4 system

Hi!
we successfully upgraded SAP ERP 6.0 system to SAP EHP4.
Now we would like to extend the functionality by adding the following components:
- SRM One Client
- Portal and MDM
Question:
1) Can some one explain the procedure to do this?
2 Where can I find the Installation files and documentation?
Any helpful information will be very appreciated

Hi!
Thank you very much for your response!!
My actual situation:
I have a EHP4 for SAP ERP which has only ABAP stack.
Questions
1) Should/must I install a Java-Add In Instance?
a) Is it possible to install a Java Add In Instance for EHP4 ERP system or do I need only a extra/new Windows server for this?
b) what are the must usage scenarios I have to choose for the Java installation (Portal, MDM, PI)?
2) what is the exact installation sequence (SRM One Client, SRM MDM, NW Portal)?
Thank you very much!

SRM one client Contract Management

Dear Experts,
Can we create contracts in SRM one client and distribute them to our ECC system.
Because I seached on service marketplace and no where its mentioned that Contract mangement is possible in SRM one client.
Sourcing is possible that I have checked the functionality. Please reply
Thanks
Ankit Jain

Hi Ivy,
Yes Correct nothing mentioned in the configuration guide or any other document.
But I checked System nodes no where I found that contract management is possible in SRM one client.
Also Note 963000 doesn't say anything about it.
Below link also says its not possible so I am confused even Roles doesn't have Contract Menu
SRM 7.0 one client setup in comparison to SRM 7... | SCN
Regards
Ankit Jain

SAP/SRM One client approach

Hi all,
Not sure where to put this question.
Can anyone point me in the right direction on finding information on the benefits / risks/issues on a one client approached for SRM?
Or list them here?
Thanks for any info!

Hi!
Thank you very much for your response!!
My actual situation:
I have a EHP4 for SAP ERP which has only ABAP stack.
Questions
1) Should/must I install a Java-Add In Instance?
a) Is it possible to install a Java Add In Instance for EHP4 ERP system or do I need only a extra/new Windows server for this?
b) what are the must usage scenarios I have to choose for the Java installation (Portal, MDM, PI)?
2) what is the exact installation sequence (SRM One Client, SRM MDM, NW Portal)?
Thank you very much!

Business One Client installation issue

Last Friday we upgraded our SAP Busness One to 8.81 from 8.8 and the update launched for the client installation on XP Pro box, but the installation got interupted and did not complete. I was faced with the problem that I can't uninstall the old client with Add/Remove programs as it has an error that files are missing. the same is if I click on the Setup.exe in the Client shared folder, it wants to uninstall the old version, but bombs as it is missing files.
The question is how do I manually uninstall the old client so I can do a new install of the new version?
As a bandaid, I was able to upgrade another XP Pro box and copy the directory into the probelm one and it lets SAP Business One run. However, I am missing a couple of registry entries.

Same happen to me month back , it was unable to uninstall or remove registry from the system and when we start the new setup it says you already have SAP B1 installed in your system. I check the Program Files folder and there is no SAP folder in it .
Solution but not a professional one...
Just copy the SAP folder from other system which has client installed and working properly and paste it into Program Files .
Now you can run SAP
Regards,
Ghalib

SRM "one-client" installation on ECC 6.0 EhP: Own client needed for SRM?

Similar Messages

Maybe you are looking for