SRM PO text are not going to SUS PO

Hello Everyone,
We are using SRM 5.0 ECS.
Business process - So once the PO is approved it goes to SUS and supplier sees PO in SUS.
Problem - Buyer maitained a PO Header Text and PO item Text in SRM but supplier do not see those text in SUS.
So can someone tell me what configuration I am missing for this problem ?
Regards,
Khushbu.

The following instructions are from Can’t receive text messages on a non-Apple phone
If you don't have access to your iPhone, or if you can't deactivate iMessage from your iPhone, please contact Apple Support. Support for this issue is free.

Similar Messages

HT5627 My I messages are not going through

My I messages( text) are not going through
I have to change all to deliver as text

Yes, many are experiencing this issue. A phone reset or going to Settings > General > Reset > Reset Network Settings resolves the issue.
Let Apple know about the issue here: http://www.apple.com/feedback

Texts are not showing up after upgrading to version 11

Could someone help me with why some of my texts are not show up on my Flash project? Before the upgrade, everything is fine. However, after upgrading to version 11, my texts are disappearing.
Before (version 10.3.183.7...)
After (version 11.0.1.152...)
The texts in the boxes will disappear, when I hover mouse cursor over it. Those boxes with texts in them are created with an external AS file, and the texts are dynamicaly changed/put in with an external XML file. There is a mask on the boxes, show only 4 at a time.
Demo: www.ethanslin.com/portfolioWorks/flashWorks/demo/
You will see the changes with Flash player version 11, and everything working fine with older versions.
I use iMacs with Snow Leopard and Lion, and this happens on all of the browsers with Flash Player version 11.01.152. I also tested on Windows 7, and it is still happening. Is this a Flash Player bug or something changed that I am not aware of? Is there a work around for this?

This is a known issue and we have a fix for this in our next release. Thanks for posting.

My 4S has stopped ringing. Voicemail's disabled but if you call me, you'll hear it ring your end but it does nothing at mine and freezes if I make a call. Texts are not being delivered or coming through delayed. Ringer is on, tone enabled - help!

My iPhone 4S has stopped ringing altogether. Voicemail is disabled but if you call me, you'll hear it ringing at your end but it does nothing my end and freezes in the phone app if I make a call (doesn't ring or connect and doesn't freeze the phone, just the calling part). Texts are not being delivered or coming through delayed. Ringer is on, tone enabled - help!
I've disabled roaming so it only runs on wifi (this after getting a £4k phone bill...) and I can use Skype, Viber and WhatsApp with no problem at all.
Would really appreciate any help at all!
Many thanks.

Hi there - am with Orange and they said nothing wrong with account and service running normally. They said if they had cut me off I would've received a text (debatable with current message receiving situation!) and when I called out it would say 'calls from this number are barred'. Also if you called me it would say something similar. But it doesn't, it will ring and ring until it rings off but nothing happens at all on my handset. Not even a missed call notification. If I call out, it will display that it is calling the number but that's it. If I cancel the call it will constantly display 'ending call'. If I come out of the phone and go to another app then revist phone it will start calling that last dialled number - without ever getting as far as ringing or connecting.

Emails from the organization are not going through ePrint

Hi,
I've been having some issues with the ePrint feature that's configured in one of the printers that we have in our office. The printer is a HP LaserJet 200 color MFP M276nw. Every other client from other email addresses such as Hotmail, Gmail or any other address are able to send emails to our ePrint address and are able to print on it successfully. However, all the emails that are being sent from within our organization are not going through. We get an unsuccesful delivery message from the Exchange server stating that
The server has tried to deliver this message, without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk
We had checked with our Exchange administrators and they have advised that the email is trying to be sent, but in the destination it is being rejected. How can I get this issue to be addressed?

Hello praveen_haridas,
Welcome to the HP Support forums. I understand that your corporate emails are failing when trying to send an email to the Laserjet 200 MFP 276nw printer's ePrint email address.
Are you getting any messages about the failed messages in your ePrintCenter/HP Connected account? If so what does the message state about the failed job?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HT4623 My texts have stopped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose texts are not getting through. We have both restarted our iphones but the problem contin

My texts have stoipped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose texts are not getting through. We have both restarted our iphones but the problem continues.

Have you talked to your carrier (or your friend to his)? Could be an issue at their end.

Service Account details are not going through header(OSB Business service)

Hi
I have an issue with service account. Assume I have a proxy service A, Business Service B, Proxy service C.
A invokes B and B invokes C (A --> B --> C). All calls are through http protocol.
I created a service account with userid and password details and attached it to the Business service B(Static for basic authentication).
Added log activity in proxy service C for context variable $header to verify whether userid and password are coming through request header or not.
I executed proxy service A from sbconsole but I couldn't see userid and password details of created service account in the logs. Only nemespace are logged in the file.
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"></soap:Header>>
Can someone please help me why service account details are not going through business service request. Am I missing any steps?
Thanks in advance
KK
Edited by: 966531 on Oct 23, 2012 4:23 AM

Basic authentication information is stored under transport headers (check $inbound) whereas $header is populated for message headers (for e.g. - SOAP headers), so you should be checking $inbound instead of $header
Regards,
Anuj

When SC is partially rejected my manager no workitems are not going to user

Hi Gurus,
Below is our requirement:
Requester (User) creates a SC of multiple line items. Shopping cart is rejected by the manager for a particular line items and rest of the line items was approved, for the rejected line items workitems are not going to requestoru2019s inbox and also e-mail is not triggered to requistioner.(Informing that the SC is partially approved)
Help us how to implement the above functionality? We have figured out a BADI- BBP_WFL_SECUR_BADI will this BADI suit to our functionality.
IF then throw some input on this. Or please suggest any OSS note related to this functionality.
Regards
Paul

Hi Daniel,
Thanks for the quick response.
WF we used is WS14000133, Last approver is Manager further no approvers.
For Manger they havenu2019t set (BBP_WFL_SECURITY) any value.
Regards
Paul

Request For Quotation - ME41 - Item texts are not getting copied

Hi,
I created one RFQ (Request For Quotation) by copying from the existing one (through t-code ME41). But item texts are not copied.
How can this issue be resolved..?
In menu path ( Item --> Texts --> Adopt Text ), "Adopt Text" option is available. But its in disabled mode.

just use F4 to get a valid entry, it is only grey to prevent manual typing

Mails are not going

Hi Experts,
I have developed a RFC to approved leave, this RFC will send mail to required recipients. After executing the RFC, when we check into the TCODE: SCOTT mails are sending properly. While the same RFC calling from .NET mails are not going.
Please let me know any kind of configuration required in .NET or Share point.
Please do the needful.

Hi,
Refer below links.
Mails are in "Waiting" status in SCOT
Mails not send in SOST
Regards
Durga

Mails are not going from apex application

Hi,
Mails are not going from my apex application. I had done the instance settings by logged in as admin. SMTP port is also connecting. Please help me to solve the issue.

Hi,
Mail queue is vacant. I think the problem is with the process. No process or validations are working. Actually, I have copied this application from another schema. Is there is need to set anything?..I had regenerated all the tables,functions,triggers in my schema .Processes and validations are completely inactive

My messages are not going through or coming in from other iOS devices. Having to send and receive in SMS. What is up?

My messages are not going through or coming in from other iOS devices. Having to send and receive in SMS. What is up? Anyone else having these issues?

There's an article that Apple has acknowledged this issue. They recommend turning off imessages, reset all settings and then reactivate imessages.
If that doesn't work, you may just have to wait until they release an update, which should be pretty soon.

Messages are not going through in my Ipad. I have upgraded to ios5

My messages are not going through in my ipad. Recently I upgraded to OS to ios5. It says not delivered.

Try calling *228 and choose option 1 to reset the 0's and 1's on the device.
Is there a setting on her phone that she may have triggered in her contact for you by accident to block your texts

I just downloaded OS X Mavericks and my texts are not coming through to my Mac at all. How do i change that??

I just downloaded OS X Mavericks and my texts are not coming through to my Mac at all. How do i change that??

Open Messages. Then go to the Menu and click on Messages. In the drop down select Preferences. Choose the accounts tab. If you have already added your iCloud account then remove it and add it again.

Master data load: texts are not loaded

Hi friends,
Trying to load BW Hierarchy(0COSTCENTER) to BPC dimension(P_CC).
Loadedd master data & text data using package "Import master data from BI infoobject"(/CPMB/IMPORT_IOBJ_MASTER), but EVdescription (texts) are not uploaded ino BPC dimension (P_CC).
Because of above error, when i try to load hierarchy(0costcenter), sytem throwoing one more error(JScrpit evaluation error).
Now i want to load texts into P_CC. ours is bpc 75nw sp10.
Found 2 notes, but these are related to older support packges
1462732 u2013 DM: text node descriptions canu2019t be imported.
1531601 - Incident 737084 / 2010 / text nodes aren't loaded
Transformation file:
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=-1
ROUNDAMOUNT=
*MAPPING
ID=ID
CURRENCY=0OBJ_CURR
*CONVERSION
DM package run:
Infoobject: 0COSTCENTER
set selection: Attributes Controlling area = SP00
                       Hierarhcy: import text node(yes), selected hierarchy, version(empty),memberid(SP001170),level(not filled)
                       language: English, medium description,
                      attiribute list: currency(0OBJ_CURRENCY),controlling area
fileter by attributes or hierarhies option selection,
Mode: Update
Format: internal
Dimension: P_cc
package ended with error
Failed to write text of master data; check the error message
checked BPC dim, only member ID & currency is updated, but not evdescription.
Can you please share valuable inputs.
thanks,
naresh

resolved problem.
Packages given bpc7.5 nw sp10 are is exactly working.
Mapping section:
ID=0CO_AREA+ID
CURRENCY=0OBJ_CURRENCY
becoz base members are automatically added with controlling area in BW hierarchy on 0costcenter.
Followed method given in how to guide.

SRM PO text are not going to SUS PO

Similar Messages

Maybe you are looking for