SRM PO to PI and R/3 System at the time of Creation

Dear All,
We are imlementing SRM 7.0 with extended classic scenario with the different backend systems including SAP non-SAP systems.
Our scenario is this when the Shopping cart is created and Ordered the PO should be Transfer to the R/3 system using standard RFC method and to PI also from there the PO would be further sent to the non-SAP system.
Could you please suggest me the best possible solution for achieving this functionality.
Your early responce will be highly appriciated.
Kind Regards,
SA

Hi,
1.Maintain the RFC connection
2.Maintain Partner Profile for the vendors(SRM to ERP)
3. Maintain Distribution Model.
4. In ERP do the above for PI
In Pi maintain the profile for ERP to receive the message
5. In PI Maintain the Party, service, connection component etc.
6. Maintain for PO sender/receiver
7. Maintain for Invoice sender/receiver.
I hope this helps
Cheers
Saj

Similar Messages

Hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.

hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.

the error is like "Could not load Apple Qmaster preference pane"
if there is a way around it please help me coz I cannot render my video projects on Compressor anymore...

Automatic and manual batch determination at the time of Goods receipt

hi,
where i can have the settings for automatic and manual batch determination at the time of Goods receipt and goods issue..
E.g.: If i am receiving material from vendor then my requirement is system will generate batch automatically...
Where we can get this setting?
Tx
Uts

Dear,
You assign the batch number either
Manually
Automatically, using internal batch number assignment, refer to Customizing for Batch Management under Internal batch number assignment.
Internal batch number assignment is activated for the complete client, unless you exempt individual plants or materials using a customer exit (see Configure customer exits for intern. batch number assignment in Customizing for Batch Management).
The R/3 System informs you that the internal batch number assignment is active. You are however only informed once per transaction, for example, when you enter the first item on the multiple-entry screen.
Please refer: http://help.sap.com/saphelp_45b/helpdata/en/25/283cb44f7811d18a150000e816ae6e/frameset.htm
Regards,
Syed Hussain.

I try to down load some app... But said that I have to read the new term on iTunes and agree. So by the time I get to the end of the term there was no agree thing for me to agree on. How can I fix that. Thank you for ur help.

I try to down load some app... But said that I have to read the new term on iTunes and agree. So by the time I get to the end of the term there was no agree thing for me to agree on. How can I fix that. Thank you for ur help.

Thank you for your help are you aware of any apps that will work the iso 4.2.1 system that will let you watch movies on the phone. Also I tried to down load something else the other day and got message that Safari wont let you open this is ther any to see if i have the latest safari on my phone?

Macbook shuts off and when I restart it the time is changed? Have I been Hacked?

macbook shuts off and when I restart it the time is changed? Have I been Hacked?
I am concerned that someone is going to steal my identiy and will in incurr 12 years of bad credit? I have just installed mountan lion and am unsure if this problem was caused by this? I suspect that if there was someone, or a program was trying to remotely access my computer then there would be traces of their actions.

How old is your macbook, and what condition is your battery in?
I doubt you're being hacked - more like your battery is dead.
Try doing both PRAM and SMC resets, setting the system time and seeing if they hold. Ensure you are connected to a power source.
For PRAM
http://support.apple.com/kb/HT1379?viewlocale=en_US&locale=en_US
For SMC
http://support.apple.com/kb/HT3964

Can not see my Airport in the list of Wifi networks and is blinking organge all the time

Can not see my airport on the list of WiFi networks and is blinking orange all the time. Tried to reset several times.

Do you have a Mac or idevice for setting up the Express? It does require a later utility than is available for windows.
You might be able to setup with the v5 utility in windows but there is no guarantee.
You should use a simple name both for the base and the wireless. eg AEXgen2 base name and AEXwifi for wireless name.. that is if you get access.

Stop timer, and link button to stop the timer

the problem is the timer will automatially run until the end whenever i turn the button and how could i pause the time and control the timer. Furthermore, how could i link the operational(Wash,Rinse,Spin,Soak) and water level to set the timer?
Solved!
Go to Solution.
Attachments:
washing machine.vi ‏25 KB

In your code, the timer implementation doesn't include pause feature.
Try out the attached timer, I made while practising for CLD exam, it has PAUSE feature.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.
Attachments:
Timer (with pause).vi ‏13 KB

HT201406 IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even powe

IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even power if off. I can't access the hardward ID which Apple support seems to require for Chat.
It might have happened when I was accessing my camera bypassing the lock screen!
All I know is that the thing is now useless and it looks like I will have to wait for the battery to run down to see if powering it back up afterwards will solve the problem.

I have since discovered the "hold down home key and power button" together for a few seconds and this seems to have worked .... phew!

My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine. Any idea why this is happening/what I can do to fix it?

My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine. Any idea why this is happening/what I can do to fix it?

I was having this problem while still using Mavericks -- it started after a Mavericks update last spring. During the initial Yosemite beta runs over the summer, it seemed to be fixed, but after the official launch in October, I had all sorts of problems keeping connected. Its gotten a little better, but still happens to at least one of my devices every day. Weird that we still cannot figure out why the connection keeps dropping on some devices, but not others, and then the next day, one of the devices that didn't disconnect the previous day will disconnect, but the ones that did disconnect, stay connected. It's just sloppy, poorly written software for technology that isn't working the way it should. If you turn off Continuity and Handoff on all your devices, you will probably see that everything stays connected. With those turned off on all devices, TC stayed connected to everything for over a month. The day I turned Continuity back on, all the problems started again. It had something to do with the bluetooth version being used, the wifi routine, and Apple's AirPlay technology not quite getting along with each other.

HT201317 Dear Sir/Madam i want to tell you that I am very disappointed because I just read that in photo stream my photos are stored only for (30) thirty days.I didn't know that and i didn't have the time to save them on a device.I was robbed of mobile al

Dear Sir/Madam
I want to tell you that I am very disappointed because I just read that in photo stream my photos are stored only for (30) thirty days.I didn't know that and I didn't have the time to save them on a device.
I was robbed of mobile before (3) three days and I lost 2.000 photos!
Is there any possibility to retrieve them?
If it was possible that would be great as I would save them immediately to my computer instead of losing them again.
Thank you for understanding
Kind Regards
Giaourtsakis Kleanthis

If you were trying to get this apple, you would do it here: https://getsupport.apple.com/

Today I was shopping and I went to check the time on my Iphone but it had shut itself off for no reason and now it won't turn back on. What should I do?

Today I was shopping and I went to check the time on my Iphone but it had shut itself off for no reason and now it won't turn back on. What should I do?

It could have powered off. Try holding the sleep button down for a few seconds until the apple logo appears to restart it

I just purchased a 3TB Time Capsule. I live in Italy and have 220V power. The Time Capsule is rated for that, but the cord says 125V. Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?

I just purchased a 3TB Time Capsule. I live in Italy and have 220V power. The Time Capsule is rated for that, but the cord says 125V. Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?

Due to the kind of plug used the US power cord is rated at the 125v value.. and legally we cannot advise you to use on higher voltages.. although I have never had issues in Australia.. 240v.
But adapters from your Euro power plug to US are generally ugly .. unsightly things.. and often sit high above the socket and are none too stable.. I agree with Bob.. just go out and buy a standard figure 8 power cord.. check with Apple in Italy for a white one.. if you are going to have it on show.. black are far more common. Or even check ebay for a standard power Apple power cord as a number of items they sell use the figure8 socket.

So I have been using my iPad for a few months now and I recently noticed that the time display next to the playlist name in the music app that is supposed to display the total song count and time of a playlist is way off. I have a 25 song playlist that 2

So I have been using my iPad for a few months now and I recently noticed that the time display next to the playlist name in the music app that is supposed to display the total song count and time of a playlist is way off. I have a 25 song playlist that is around 2 hours on my computer appears as 2003 minutes on my iPad. It's a smart playlist limited to 25 songs if that makes any difference. Is this happening to anyone else? Any help would be appreciated!

Greetings,
First make an iCal backup, File > Export > Archive.
Remove the following to the trash and restart your computer:
Home > Library > Caches
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
__NOTE: Removing these files will remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Once the computer is back up and running open iCal and test.
Hope that helps.

Reboot the iphone to install a program and has been left all the time with the apple on the screen

reboot the iphone to install a program and has been left all the time with the apple on the screen.
takes so hours without turning away. I can do?

Reset your phone , you wont lose anything. Hold the home and off button down until the apple symbol comes up.

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages sometimes. How do I fix?

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages (no connection) sometimes when trying to connect devices to the wireless network. How do I fix? Sometimes devices cannot connect to the network because of conflicting IPs. I look on the Motorola and every device has a unique IP assigned but occasionally a device has taken the IP of another device. I have been writing down all the devices and the IPs they have been using. It happens more with PCs than Macs, ipads or iPhones.

If the Time Capsule is set up correctly in bridge mode, then it is the responsibility of the Motorola modem/router to provide the correct IP address assignments for all devices on the network.
Check to insure that the Time Capsule is correctly set up to operate in bridge mode as follows:
On your Mac, open AirPort Utility
Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Network tab at the top of the next window
Insure that the setting for Router Mode is configured to read "Off (Bridge Mode)"
Once you have confirmed that the Time Capsule is configured correctly, everything else is the responsibility of the Motorola modem/router as far as network routing and IP address assignments for devices.
If you continue to have IP address issues, then you should contact the Internet Service Provider (ISP) that provided the Motorola device to you and ask them to fix the issue.

SRM PO to PI and R/3 System at the time of Creation

Similar Messages

Maybe you are looking for