SRM Post Installation - Webadmin and EBP users

Hello SRM gurus,
I am new to SDN but I am familiar with SAP Basis Administration. I have recently installed the SRM 5.0(NW04s). I configured the shopping cart link and the integrated ITS. I was asked to create userid for webadmin (who creates users through the browser). I searched through SDN but was not able to find it. Please let me know the procedure to get the webadmin and creation of EBP users. I appreciate your time and business. Thanks in advance. Waiting for your replies......
Raj

Hello Raj,
1. Create webadmin user in SU01 transaction, assign SAP_BBP_STAL_ADMINISTRATOR role
2. Go to USERS_GEN transaction and create user from existing SU01 user
3. Go to PPOMA_BBP transaction and search the created webadmin user, Select position level and check the ROLE attributes. If no ROLE attributes are maintained, add SAP_BBP_STAL_EMPLOYEE
4. logon to SRM with webadmin user
Regards,
Masa

Similar Messages

Transport Request as Per TMS in XI 3.0's Post Installation

Hi Everybody !!
..I have completed cinst, dbinst, client copy, jinst, xinst installation for XI 3.0 INSTALLAION ON ABAP + JAVA.
SAP_BW , SAP_BASIS, SAP_ABAP and PI_BASIS Patches have been applied. I am doing the XI Post Installation Steps and for that as per the Post Installation Steps' Guide, I need to perform SAP XI customizing... I am done till the stage of using tr code SWF_XI_CUSTOMISING to perform the basic
customising of SAP XI. But, after entering prefix no. higher than 900 for the new user with 'local object' selection... I have confusion for the following instruction :
" You need to enter a transport request according to your transport management system ( TMS ) and choose Save again.."
I don't see any tms button or any menu option and hence, have no idea how to enter a transport request and where to enter that request...
I sincerely aprreciate the help provided and just for the record, I never fail to assign points for helpful answeres..
Thanks in Advance Again..
Regards..
-Rupen Patel

Hi Rupen,
You just have to make sure that nodes Maintain Runtime Environment and Maintain Definition Environment have green hook (not a red cross) after all the customizing done in transaction SWF_XI_CUSTOMIZING.
The instruction "You need to enter a transport request according to your transport management system ( TMS ) and choose Save again" is not so much important as it is just an informative instruction. Even i don't remember doing such a task and my XI environment is working perfectly fine.
Regards,
Abhishek

BI Post Installation /JCO Destinations

Hi all,
I am having some troubles getting the Netweaver BI functionalities to start running.
We have just upgraded our BW System to Netweaver 2004s and installed an add-on Java Stack.
Both the ABAP Stack and the Java Stack have the most current patch level.
I followed the SLD post installation Guide and I think I did everything as described, including the prerequisites described in the SAP Notes 983156 and 917950.
I do want to add that I am a functional consultant with quite a lot of experience in BW and BPS, but very little knowledge in Basis technology. Our Basis collegues know only little about Java, so we are trying to work it out together.
I imported the content though the SLD and created our ABAP System as a technical system in SLD.
I then tried to use the post-BI installation wizard. The following steps 1-9 are executed without problems:
1.     Create RFC Destinations in ABAP
2.     Update Table RSPOR_T_PORTAL
3.     Create RFC Destinations in Java
4.     Create System Landscape Folder
5.     Create BW System
6.     Set System Alias
7.     Add ACL
8.     Set Master System
9.     Download Engine Certificate
I get following error message when trying to install step 10:
Import ABAP Certificate to Engine Import not successful Element 'SAPConfigLib.C40.Unclassified.uploadAbapCertificate':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstall er.StepExecuter.run.41
Element 'SAPConfigLib.C40.Unclassified.uploadAbapCertificate':Error during executing Java Reflection:Remote call errored
I also noticed that I cannot maintain the JCO destinations both in the web dynpro content administrator and in the transaction SPRO.
In the web dynpro content administrator i see the buttons, but they are greyed out, in SPOR the "execute" button is missing.
From what I read, I get a feeling that the symptoms might be connected, but I ran out of ideas what the problem could be.
Does anybody have an idea?
I would be very grateful if somebody could help.
Regards,
Omar

Hi
I am trying to install BI7.0 and as a part of it I was successful in installation part but when i am trying to check the prerequisite for the notes 983156, I was stuck at the point of bringing the system BI7.0 in to the sld, from the note I can infer that to bring the system in to sld we need to use rz70 and give the gateway details over there (host ,service) when I try to continue with the default values i was not successful to bring the system in to land scape can some one guide me for the steps to bring this system in to land scape.
Any documents of ur previous installation would be appreciated.
Regards
Manikanth

Post Installation Steps in RAC --Urgent

Hi DBA's
Database Version 11.2.0.1
Operating System : Solaris 10
This is first time i am implementing 2 node RAC.
I Installed Grid and Database successfully, and my RAC instance working fine.
My Concern is,
I want to test thoroughly my RAC instance, require tips.
I want post installation steps and Patches for the database and grid, Kindly provide me.
Because i searched some documents but still got confusion, can you please provide the patches.
Regards,
SG

SG2 wrote:
Yeah thanks, now i applying Patch:12419378, i looked some of the recommanded patch document, i found those 2 patches u mentioned.
But the Patch:12419378 it is taking too long time, because i started almost 1 hour back but it seems it is stopping at Patching component oracle.ldap.rsf.ic, 11.2.0.1.0..
what could be the reason? is it take long time at this stage?
Thanks
SG
Hi SG,
It doesn't look normal to me, see the OPatch log if there is any error
Trying to search in metalink but nothing information about the component, I would advise try contact Oracle Support
Cheers

Wht r post installation steps of BW 3.5 & how to check it installed correct

Hi,
Have installed BW 3.5
At end of installation is ask me abt SLD
Im not selecting SLD
send me BW 3.5 Post installation guide and how to configure with R/3 4.7 Server or ECC 5.0 or ECC 6.0
I don't need SAP offical guide, I need word document with step by step picture.
how to check it installed correct
mail me <email address removed by moderator>
Edited by: deepak kajale on Dec 3, 2008 2:25 AM
Edited by: Siegfried Szameitat on Dec 3, 2008 8:36 AM

>
Markus Taxacher wrote:
>Is the only possible way to migrate the BW 3.5 to ERP/ECC 6.0?
> Whats the easiest way for upgrading to 6.0?
>
> Best regards,
> Markus
Hi, you cannot use BW3.5 you must have BI7 (not ECC6!) to install BCS 6 - BCS sits on BI (formerly known as BW).
It doesn't matter what version of source system you have, you can still collect data from ERP 4.6, you don't necessarily need ECC6.

Post installation error

Hi folks ,
job cancelled while doing post installation (SGEN ) and 89% job completed....
it show following error
ZDATE_ILLEGAL_LOCTIME
how can i solve this error .....
give me suggestion
regards
sathish

Hi,
please check with ABAP dump error
How to correct error line what it says
some times it can be time of Db server is not in sync with Application server or difference in O/s and application server.
Also can you look at this thread
[ZDATE_ILLEGAL_LOCTIME error]
and follow the notes
SAP Note 447839 - ZDATE_ILLEGAL_LOCTIME
Note 481835 - Analyzing the time zone settings

SRM 7.0 and SRM MDM Installation query

Hi,
I have installed Both AS ABAP and AS JAVA Stack separately and going forward I need to know
1) Do I need to install any other servers other than this like EP and PI etc?
2) I also wanted to install SRM MDM, for that I have gone through some documents and threads and found that
Prerequisites
1. SRM Server- Installed with ORACLE database
2) For SRM MDM
Ø        Download the SRM-MDM Catalog 2.0 installable from Market Place-- Done
Ø         Install the MDM Server and other GUI Clients--Done
Ø     UnArchive the SRM-MDM repository available with the installables only
                     Need help for
             . Not able to find DBMS server
             . User
               . Password for DBMS setting
Ø      Deploy the two SCA files - MDMJavaAPI and SRMMDMCAT on WAS and restart the Portal- Done
Ø        Access the Config UI by using the URL http://:/SRM-MDM/SRM_MDM and change the layout as per the requirement. In this you can specify the fields to be displayed for Search, type of UI etc for the particular user
. Where I can get the "Port"
Will follow the below steps once the above issues are resolved
*Create the Web Service in SRM system and specify all the required
parameters. You should get the SRM-MDM configuration guide from Market
Place.
*Change the Org Plan in SRM to assign the Catalog to the SRM users.
*Login into EBP and select SHOP, you should get the SRM-MDM Catalog link
if all the configurations are there in place.)
3. Web Application Server
> Is seperate WAS required even after installing SRM AS JAVA stack, if yes what to install
       4) In the market place I have found that SRM MDM install.exe and in that there are two options to execute. Install MDM
           . Install SRM MDM
          Do I need to install both or only one or is this not required, if I install SRM MDM my question is what is the use of
          the above point 2 steps process this one
         Thanks,
          Jairaj
Edited by: M Jairaj on Feb 3, 2010 3:43 PM

Hi,
> I have installed Both AS ABAP and AS JAVA Stack separately and going forward I need to know
>
> 1) Do I need to install any other servers other than this like EP and PI etc?
>
As you have already installed Java stack then it will be your EP. You don't need PI for SRM MDM.
> 2) I also wanted to install SRM MDM, for that I have gone through some documents and threads and found that
>
>                      Need help for
>
>              . Not able to find DBMS server
The DBMS Server property defines the network identification string of the DBMS instance / machine / server that is used by the DBMSspecific client on the MDM Server machine to connect to the DBMS. The brand of DBMS on which the repository is running is shown in the DBMS Type property.
NOTE ►► When you mount two MDM repositories with the same name (but located on different DBMS Servers) on the same MDM Server, MDM distinguishes them in the Console Hierarchy pane by appending the name of the DBMS Server in angular brackets to the repository name (e.g. u201Crepository <server>u201D).
>              . User
>                . Password for DBMS setting
>
ent. In this you can specify the fields to be displayed for Search, type of UI etc for the particular       user
>
>       . Where I can get the "Port"
>
Note 1414670 - MDM 7.1: Adjusting MDS port in MDIS and MDSS ini files
Check SAP Note 1077701 - SRM-MDM Catalog - FAQ
>        4) In the market place I have found that SRM MDM install.exe and in that there are two options to execute. Install MDM
>            . Install SRM MDM
>
Check installation guide for this.
Thanks
Sunny

SRM HR Org Structure - error in EBP User

We are on SRM 4.0 (EBP 5.) and have replicated our R/3 org structure. We run a nightly batch job that updates the org structure in SRM with any changes made in R/3. Some users are unable to use SRM due to not being replicated properly into SRM. When you view the org structure via PPOMA_BBP - Change Attributes Check there are two STOP signs - with the following error messages
STOP   BBP Error in EBP User xxxxx
STOP   HR/ALE Verteilung ist aktiv. Verteilen Sie die Benutzerdaten neu.
When I translated the German error message, it translated to
HR/ALE Distribution is active.
Redistribute the user data.
How do I redistribute the user data to correct the problem so the users can use SRM again?
Also, where can I change the german transaction into English.
Any assistance would be greatly appreciated.
Thanks
Jan Stover

Hi Jan,
     Follow these steps in R/3
1. Go To PA20. Check the Personal ID for the user for whom it shoots an error
2. Go To PFAL. You might have to use a variant for this transaction. Feed the User's Personal # and the target system.
This will push an IDOC from R/3 to SRM with the org data
     Follow these steps in SRM:
1. Go to SE38 and execute this report RBDAPP01
This report will process the incoming IDOC to the Org Structure in SRM
Regards,
Anand

Post installation for Portal and errors for new system

I've recently installed a NW 7 based ABAPJAVA System with Portal Components (EPEP Core) on Windows + Oracle for demo.
1 ) Since, I am facing a lot of errors after the installation, I think I have missed to carry out some post-install steps. Can someone please suggest on the post-installation steps in some detail ??
2) When I try to open the newly installed portal using http://fqdn_host:50000/irj ; the browser shows some exception has occurred: However, I tried to restart the system (everything including db) as suggested in some of the other links and login went fine.
After I logged in to the portal (/irj) as j2ee_admin; I am trying to open Content Administration --> Portal Content OR System Administration -> Transport OR --> System Configuration etc ; but I am getting the error coded below::
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.innerpage/com.sap.portal.layoutPortal1_WAandNavPanel
Component Name : com.sap.portal.layouts.framework.WAandNavPanel
Error occurs during the rendering of jsp component.
Exception id: 05:05_25/03/10_0032_7012350
See the details for the exception ID in the log file
The log file (that I believe is the trace file in cluster/server0/log/defaultTrace.0.trc) says (This gives several such exceptions listed in the file.) (I'll put the log as a comment to the post because of the limit on max characters)
Note that the link http://punitp84712d:50000/nwa works absolutely fine. PFB the J2EE process details.
J2EE Process Details
Name Type PID Status Debug
Dispatcher ID7012300 J2EE Dispatcher 3,240 Running Disabled
SDM SDM Server 4,736 Running Switched off
Server0 ID7012350 J2EE Server 596 Running Disabled
Can someone please help me through this and let me know how did you draw your inference. Let me know if there is any other place that can give me more information / logs on the error.
Thanks,

Hi Jay,
Please check that server is Running but not able to open some application. I would suggest to check the Enviromental Variable for My Computer :-
- Database Enviromental variable is added or not under "user vairable for <UserID for Server Desktop>
- Check JAVA_HOME Enviromental variable is added or not under "System Variable'
Check at (My computer > Properties >> Advance >> Startup and Recovery >> Enviromental Variable >> System Variables/User varaible
Update your server IP address and host name in host file entry at (RUN > drivers > etc > host file) and check database server services (Run > Services.msc >> Start your database services manually and change prperties as automatic)
Then try to open portal URL http://<Host>:<Port>/irj/portal or http://<Host>:<Port>/index.html
Hope it helps
Regards
Arun

Hello installed xi and trying 2 do post installation but getting problem

Hello,
          I installed SAP XI and trying to do the post installation...
          1)Created one client 100 and user XIUSER....with all rights like sap_all
          2)And created one more user XISUPER......only roles given...
          3)now I am trying with internet expositor
              http://application server:java port/exchangeProfile
                 screen came user:xisuper
                                      p/w: 12345
                       BUT IS NOT GOING FORWRD....WHAT MIGHT BE THE PROBLEM..... TRY TO GIVE ME THE SUGGESTION....
Regards,
Sateesh.j

Hi !!!
Here is the guide with necessary steps
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
You will get the details of post installation activities for SAP XI in its installation guides itself. Have a look:
SAP Exchange Infrastructure Release 3.0 - Installation Guide
SAP Exchange Infrastructure 3.0 SR1 - Installation Guide
Plus you can go through the following docs:
SAP Exchange Infrastructure (XI) 3.0
Troubleshooting Guide - SAP XI 3.0 and 2.0
SAP XI Release 3.0 SPS11Configuration Guide
Also you can have a look at the following thread, you will get some links in these threads too:
Post installation of XI?
XI INSTALLATION and POSTINSTALLATION
XI Post Installation....Need help...
XI Post Installation - Help
XI Post Installation - SLD Connection
refre this thread
Post Installation of PI - PI template Installer not found
just check also have you done this step ?
This step is not covered by the PI template.
You need these files The files SCM4003_00.ZIP and SCMBASIS4003_00.ZIP
Further reference
http://help.sap.com/saphelp_nw04s/helpdata/en/44/5755451622311ee10000000a155369/content.htm
Another thing are the j2ee adapters and the adapter engine visible in the ID just check once. If not then go through these.
1)Yeap you need the basis component imported first.
2) Apply SAP Note 764176.
3. /people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
<b>pls reward if useful</b>

PI 7.31 Java only stack (PI and Orchestration package) post installation

Hi,
Recently we installed PI 7.31 server, i searched in sdn but i couldn't get any post installation steps.
Could you please provide PI 7.31 Java only stack (PI and Orchestration package) post installation steps.
Thanks,
Venkata Ramesh

HI Venkata Ramesh,
Ref: UPGRADE TO SAP NETWEAVER PROCESS INTEGRATION 7.3
http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/505374f4-9cbe-2e10-a6b9-c74a22924d26
Regards,

PI (XI 7.0) Installation and Post Installation Guides

We have installed XI 3.0 with previous clients, and we are trying to install XI 7.0 (PI) for a client on Windows 2003 SQL server. We looked for installation documents in the service.sap.com, but we were confused about which documents to follow.
Has anyone installed PI (XI 7.0) from scratch? If yes, could you provide us documents regarding installation and post installation steps. What are the differences in installing XI 3.0 and PI?
You help is greatly appreciated.
Cheers,
Karma

Hey Karma,
You dont need any guide for PI post installation.
There is a facility in NW 2004s for completing post installation, they provide with templates. you just have to execute the templates and your PI post config is done.
first execute
NWD
and then
PI templates
After this import the BASIS components into design environment.
Regards
Ramesh P

Regarding the Post Installation and SP Level

Hi All,
We have installed NWDI on our existing EP Dev Server.Installation was successful but regarding the post installation we are in a thinking as how best we could patch the newly installed NWDI system.
As our EP system is on SP 11and NWDI system on sp 9,Do we need get EP and NWDI Patch level in Sync? as there would be developers working from EP and BW as well on this NWDI server.
Here My doubt is:-
Do the Nwdi System needs to be in the same patch level as our EP system (as it is installed on EP itself.)
Do we need to run the Template for the Newly installed NWDI only after the Patch Upgradation?
Kindly Advice
Regards
Santosh.N.G

the patch level of EP and NWDI should be same

Post-Installation and Configuration of Solution Manager 7.1

Dear community,
we are a SAP Channel Partner and want to offer SAP BO support; therefore I am about to set up the Solution Manager 7.1 on a Windows 2008 R2 host with Oracle Database 11g. The installation has been completed successfully and I have applied our permanent license, but performing the following post-installation steps some problems and questions have arised. Because I don't want to write a novel right here, let's begin with the first issue:
Updating the Solman, as suggested in post-installation.
I want to update my ISS to SP 04 and followed the common instructions using ESPIN and SPAM (see, for example, this thread: ).
That means, all packages have been loaded from ESPIN into SPAM. The problem is, that I have SPAM version 0039, but I get error message "you need at least version 0040" when I try to start the update queue. Also, I am not able to download a newer version of SPAM from SMP (702-0043 and 702-0045 are available there), because I need MOPZ for that (a message comes up telling me that items in my download basket have to be confirmed before I am allowed to download them), which will be available not before basic configuration during solman_setup later on.
So, what to do? Is there another way to get that 5MB SPAM update or do I have to go on with the old version?
Thanks in advance
Sönke
Edited by: Sönke Schnurr on Dec 29, 2011 4:15 PM (small addendum)

Okay, I am just re-installing my Solution Manager 7.1, because I couldn't solve my SPAM problem (linked thread in my next-to-last post).
I would like to configure the whole SAProuter SNC thing now. The Solution Manager host is the same which has the SAProuter installed. I have already registered and certified it and created the Windows Service which starts the SAProuter (saprouter -r -S 3299 -G routerlog -K u201Cp:CN=XXX, OU=YYY, OU=SAProuter, O=SAP, C=DEu201C), XXX and YYY being the appropriate values.
Now I want to create my saprouttable. A beta version is this one here, based on some tutorials in the internet:
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 3200
1. deny all other connections
D * * *
Do you think it's alright? I'm connecting via host port 3299, so the first two lines should be alright, shouldn't they?.
The fourth line P ? The local IP address of my host? What is that line for at all?
Another question: The connection to OSS doesn't work yet, probably because of our local hardware router firewall. Which ports do I have to forward? I suppose it is just 3299?
An elaborate answer would be highly appreciated!
Regards
Sönke

SRM EBP User management - best practice followed for your customer.

Hello All,
What are the best practices followed on SRM User manageemnt followed for your customers.
(1)When employee/ buyer leave the organisation ? what actions you do ? do you lock the users?
(2) If any thing interested share your experiences.
(3) What exactly customer expects from SRM systems on SRM user management?
(4) SAP audit/ customer audit practice on USER management ?
Any piece of information on your experiece/ best practice is appreciated.
regards
Muthu

Thanks Peter .
it is happening only in SRM right.
Is any work around for this issue.
In future SRM any planing to take care of this.
in ECC i can delete the user whenever the user moves .
All SRM customers will be very happy if SRM gives some workaround for this issue.
Every customer wants to reduce cost .
How can I find what are the opening documents for this user in one shot ?
thanks for answering this question.
I have seen our Eden Kelly report helps for shopping cart and other BO.
You are doing good job on our SRM WIKI innovative topics and discussons. I appreciate.
why i am raising this concern is that one user left the organisation and again we want to edit the data whch entered by the left user . system will not allow us to do after deleting the user.
so we are approaching SAP for ths help.
It is very difficult to convice the customers on this issues.
br
muthu

SRM Post Installation - Webadmin and EBP users

Similar Messages

Maybe you are looking for