SRM scenario XI / PI requirements

Hi all,
i have a question regarding XI requirements in SRM scenarios. What are the requirements for CLASSIC, EXTENDED CLASSIC, STAND ALONE and DECOUPLED scenarios? Are there standard contents for all of them? I understand that in CLASSIC, the connection of ERP and SRM-EBP is via RFC. Can we use XI instead for the integration to be clear?

Hi
Downlaod SAP SRM SERVER and SRM SERVER IC tpz and import them in IR.
one of these would have the mappings and the other would contain service intrefaces. If you want to make any changes, copy this to a custom and make releavnt changes.
Regards
Monika

Similar Messages

Implementation costs SuS-SRM scenario (service procurement/web-based)

Hi out there,
I am currently trying to rough-estimate the implemantation costs for a SuS-SRM scenario (service procurement - supplier enablement/web-based) with all the components it requires:
software-wise: SRM with SuS and XI would be needed
Hardware-wise ? (rough estimate)
Consulting fees ? (rough estimate)
Current facts: SAP Enterprise 4.7 in use
Or maybe somebody can refer me to a SAP price list. I have searched high and low with no positive result. A rough estimate would be good enough.
kr
Andre

Dear Emmanuel,
Yes you will not find the Interface mapping after the scenario generation. These SRM scenarios are Proxy communication scenarios and mainly involved with no change in structures.
Regarding the Communication channels, yes you have to create the channels first, before the scenario generation.
The SRM scenarios are mainly used with proxy communication and you have to create channels with adapter type XI.
In your case - the scenario is - Service_Procurement_SupplierEnablement . you have to create two receiver communication channels. this scenario mainly exchanges data between EBP and SUS. the integration happens with the below interfaces-
InvoiceConfirmation_Out, InvoiceRequest_Out, PurchaseOrderRequest_Out, ServiceAcknowledgementConfirmation_Out, SupplierPortalTradingPartner_CreateOrChange_Out , InvoiceRequest_Out etc.
The Video I have uploaded to this link-
http://www.easy-share.com/1913995983/011000358700001939872008E.zip
Please download the same, you need WebX player as it is a .arf file.
Thanks
Sugata B Majumder

Sizing MDM-SRM scenario

Hi,
In MDM 7.1 how many hosts are actually needed to run a MDM-SRM scenario? Do you need all five (import server, syndication server, mdm server, layoutserver and dbms) or is it enough with one mdm server that hosts the whole MDM solution? And if so, does the SRM catalogue require a seperate server, or does it run on the same server as a regular EP server? Im feeling a bit confused in this whole MDM environment thing atm.. please help out

Hi Naim
For answer your question you should provide more information about your plans.
For example:
if you haven't plan to do import master data automatically- import server is not needed
if you haven't plan to do syndicate master data automatically - syndication server is not needed
if you haven't plan to do product catalog - layout server is not needed
Regards
Kanstantsin

Namespace problem in SRM scenario.

Hi Experts,
I am using the RFQ scenario on SRM (Proxy) to PI to RFC.
The scenario is standard SRM Scenario.
The problem is with namespace, coming from SRM Proxy is http://sap.com/xi/SRM/Sourcing/Global
using same message Type on PI, but XML namespace here in PI is different for this message, it is http://sap.com/xi/SAPGlobal/Global
As the namespaces are not matching, the message is in RED.
How I can solve this ?
Study SAP

Hi Vijaykumar,
Thanks for your reply.
But it is standard proxy structure, Is it fine to modify this ?
& it is proxy, so we have to regenerate it in SRM also.
is it fine ?
Study SAP

Any How-to handle SRM scenarios in BI 7.0

Hi,
BI 7.0 is being implemented for a client.He is trying to use SRM 5.0.Can u provide me some how-to handle SRM scenarios in BW guides or documents please.
Regards,
Joy

Hi ,
I need to retract data from BW-BPS 7.1 to SRM.I am new to BW
(4 months experience)
Can anyone send me documentation , links or steps by steps guide to explain how
to do the link please?
Is it more or less the same as with retraction into CO-Pa?Is there a standard retractor?
If there are no standard retractors, what is the solution?
This a challenging task for me and I really need to do it at work.
Thanks in advance for your help.
I'll surely assign points if one can help me.
My mail is [email protected]
Nevil

How-to handle SRM scenarios in Bi 7.0---any help ???

Hi,
BI 7.0 is being implemented for a client.He is trying to use SRM 5.0.Can u provide me some how-to handle SRM scenarios in BW guides or documents please.
Regards,
Joy

Hi ,
I need to retract data from BW-BPS 7.1 to SRM.I am new to BW
(4 months experience)
Can anyone send me documentation , links or steps by steps guide to explain how
to do the link please?
Is it more or less the same as with retraction into CO-Pa?Is there a standard retractor?
If there are no standard retractors, what is the solution?
This a challenging task for me and I really need to do it at work.
Thanks in advance for your help.
I'll surely assign points if one can help me.
My mail is [email protected]
Nevil

Documatation for SRM scenario Service_Procurement_SupplierEnablement

Hi All,
I am setting the interface between SRM (EBP) and SUS and using the scenario Service_Procurement_SupplierEnablement, so i tried to find some documentation for this, but i didn't find nothing. Somebody knows where can i find it? or What kind of adapter type i have must to use?
Regards,

Dear Emmanuel,
Yes you will not find the Interface mapping after the scenario generation. These SRM scenarios are Proxy communication scenarios and mainly involved with no change in structures.
Regarding the Communication channels, yes you have to create the channels first, before the scenario generation.
The SRM scenarios are mainly used with proxy communication and you have to create channels with adapter type XI.
In your case - the scenario is - Service_Procurement_SupplierEnablement . you have to create two receiver communication channels. this scenario mainly exchanges data between EBP and SUS. the integration happens with the below interfaces-
InvoiceConfirmation_Out, InvoiceRequest_Out, PurchaseOrderRequest_Out, ServiceAcknowledgementConfirmation_Out, SupplierPortalTradingPartner_CreateOrChange_Out , InvoiceRequest_Out etc.
The Video I have uploaded to this link-
http://www.easy-share.com/1913995983/011000358700001939872008E.zip
Please download the same, you need WebX player as it is a .arf file.
Thanks
Sugata B Majumder

SRM scenario's difference

hi everyone,
i want to know the difference& functionality of technical scenarios in SRM............
1) can we activate the classic &extn. classic at the same time?is it possible.
2) is it possible to replicate the material from SRM to R/3? but i know from R/3 to SRM.
3) which technical scenario is better for industry requirements?
can anyone pls put an eye to solve these.points will b awarded. send asap.
Warm Regards
rakhi

Hi,
For all your questions I think Claudia answers are correct. Just to add one more point that defining the backend documents whether to happen in SRM or R/3 can be done in Purchasing group and Product category combination in SPRO.
That kind of scenario is called Decoupled Scenario. Normally when we opt for direct material (STOCK) the system behaves as extended classic. For consumables classic will be good option.
Regards,
Munna

Automatically create a PO from a catalog buy in the classic SRM scenario

All,
We are on SRM SAPK-70207INSRMSRV classic scenario and R3 EHP6 FOR SAP ERP 6.0
When a shopping cart is created and approved from the MDM catalogue we get an automatic purchase requisition. currently the purchasers manually create the purchase order from that purchase requisition but we want to have an automatic purchase order for every all catalogue buy.
is this possible in the classic scenario ?
Can we also assign specific purchasers to these automatically created purchase orders, based on, for instance, the purchasing group as we use vendor invoice management so these purchasers will receive invoices with a price differences.
Thanks as ever.
Antoinette

Hello Antoinette,
A. Stork wrote:
is this possible in the classic scenario ?
Please have a look at below wiki:
Determination of the follow-on document type
A. Stork wrote:
Can we also assign specific purchasers to these automatically created purchase orders, based on, for instance, the purchasing group as we use vendor invoice management so these purchasers will receive invoices with a price differences.
Depending on product responsability and organizational responsability, purchasing group is automatically determined for each SC item.
For those purchasing groups, users are assigned inside the PPOSA_BBP transaction.
So, i do not understand your request.
Regards.
Laurent.

MDM catalogs to be used for PM-SRM scenario

Hello All,
We are in a situation where we are using the SRM-MDM scenario for regular shopping carts. And also would like to leverage these MDM catalogs for purchases made in ECC Plant Maintenance "work Orders" for non-stock ECC material numbers maintained in ECC.
These material numbers in ECC will have a Manufacturing Part Nmber (MPN) in the material master data.
Since we had some difficulty connecting these SRM-MDM catalogs directly to the ECC work order we would like to bring these requisitions generated by "Work Orders" and push them to SRM. (Standard SAP)
Once these Requisitions come into SRM as SC.. the system automatically approves this SC (Which is standard SAP) but in this process we would like to know if there is a way the system can automatically make a call to MDM based on the Manufacturing Part Number (MPN) and bring in the price and the vendor details back to the SC automatically.
Currently we are using SRM 6.0 and MDM 2.0 in our landscape..
Any suggestions will be appreciated and rewarded..
Regards
SRM6.0 Ramp-Up-Customer

Hi,
Go with: SAP Application Components"> SAP SRM"> SAP SRM ENHANCE PACKAGE" >EHP1 FOR SAP SRM 7.0>Installation -->based on -->based on SAP NW 7.02 --> 51039147_1 SRM-MDM CATALOG 7.01 1 of 5
Download relevent OS copy as its AXi and DB2. What ever It can be: OS Bit 64 or OS Bit 32.
As it's DVD so it contains all version info in lable.sca file. Read it before you start installation.
Regards,
yaniVy
reward if helps

Scenario mapping - help required

Scenario:
A Customer sends a material (for e.g., SUGARCANE) to the company (SAP Implementing). It processes it and send back as SUGAR.
The customer is charged for the services rendered.
The stock of sugarcane/sugar should be visible in the system.
Please guide me how to map this scenario.
I will be very much grateful.
Regards,
Anbu

This sales process is referred as Job Work in SAP.
Refer following SDN thread that can be helpful to you in understanding / reference:
- Sales Process of JOB WORK
If in case you have any concern or doubt about the process, do revert back.
But don't forget to put a effort search more information on JOB WORK for reference/understanding. So that you can specific to your requirement.
Regards
JP

Third party -- XI -- SRM Scenario,

Hi SRM experts,
We have a third party sending XML PO Request with external reference ID to XI, map it to SRM PO Request, and send to SRM. What we would want the SRM to do is to process the incoming request, generate a PO number, and send back an XML PO confirmation with the external reference ID and newly generated PO number.
In R/3, I know we have to set up partner profiles, ports, and message control to automate the creation and sedning of order response for an incoming order request. Are there equivalent configurations we can do in SRM? If yes, where can we do that? Basically I would like to create an output determination when a PO is created in SRM, so that the PO is sent to the third party application via XI.
Has anyone have any suggestion on this? or encountered similar scenario?
Your feedback is greatly appreciated.
Thanks
Karma

Hello Karma,
What is the "PO Request" ? Is it same scenarion with this ?
External system to SRM
Regards,
Masa

RFC Sender and RFC Receiver Sync Scenario . Help required.

Hi,
I need to make RFC Sender and RFC Receiver Sync Scenario.
Any docs/links for it.
Regards

Hi,
I have CRM (r/3) and DM (r/3)system.
Data from differnent tables of CRM system needs to go to
DM system different tables , data will be saved there and then return response back to CRM system.
For this I have given one RFC for CRM system
For this I have given one RFC for DM system
So I have to make Sync Outbound Interface
and Sync Inbound Interface.
So I think so no BPM is required.I am correct?
Adapter -- RFC Sender and RFC Receiver Adapter.
Regards
Edited by: Henry H on Jan 29, 2008 11:20 AM

Reg SRM Scenarios

I have no idea on what and how or anything abour SRM system and its components.
But now I have to Integrate EBP & SUS (What are they & their purpose?) in SRM for exchange of some data like PO as attachments.I also have to send the same to R/3 also.
Is it possible? If yes, please let me know the steps to be followed or any blogs on this kindaa scenarios.
Thanks
siva

hi check the belowlinks for reference
Supplier Relationship Management - SAP SRM Partner Interface (B2B-OPI) [original link is broken]
https:/.../sdn/articles-topic?rid=/webcontent/uuid/c0507297-65a0-2a10-8d8c-f160c3641350&startIndex=81
SAP Supplier Relationship Management - SAP SRM Open Catalog Interface (B2B-OCI) [original link is broken]
note:reward points if solution found helpfull.....
regards
chandrakanth.k

Data Type Enhancements: ECC - SRM Scenario

Hello,
Can anyone tell us how to use the Data Type Enhancement. and what all Software component dependencies we need to define for that.
This is with Context for ECC-SRM Integration -- we have installed the add on component LOCINSUS -- this is required for the extra tax information for PO
Can anyone help us on how to use this?
Thanks and Regards,
Himadri

/people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner
that solves ur anwer,

SRM scenario XI / PI requirements

Similar Messages

Maybe you are looking for