SRM setup config

Hi,
I'm currenct trying to setup the config for SRM as AddOn to ECC.  However, when I get to the step for initial replication and attempt to replicate categories, I get a short dump with the following error:
Class PRODCAT does not exist
Long text of error message:
  Diagnosis
      An internal error has occurred
  System Response
      The program is terminated.
  Procedure
      Inform your system administrat
  Procedure for System Administratio
      Check whether the specified cl
      correctly in Customizing.
Technical information about the mes
Message class....... "MDS_LOAD"
Number.............. 005
Variable 1.......... "PRODCAT"
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Has anyone encountered this before?  I couldn't find any reference to this in any documentation or help topic.  Any help would be greatly appreciated.
Thanks.

Hi,
Please check whether note 720819 - Middleware consumer entry for SRM 40 and 50 in the OLTP-syst applies to your scenario.
Regards,

Similar Messages

  • Need Help:  ADAWS install, setup, config

    Under the 5.0.2 install guide of ADAWS, editing the Web.Config section, supossedly there is an object DirectoryServices.dll. In our box where ADAWS is installed I do not see this object at all, I have search for it but do not see instance of it on this box. Anyone know where I can find this object.
    I am about to go to the step of editing the Web.Config and uncomment the line with section name = "system.directoryservices". I am also at that part to supply the PublicKeyToken value (run sn.exe -T system.directoryservices.dll), but I cannot find the sn.exe either.
    Can someone help me out.
    Ray Salgado

    OK I ran this newly created authentication import and sync job but failing and getting these errors:
    9/20/04 14:17:33- Starting to run operations (1 total) for job 'NETMDDEV AUTH IMPORT/SYNC JOB (TEST) - Run Once'. Will stop on errors. (PID=2144)9/20/04 14:17:33- *** Job Operation #1 of 1: Authentication source (for synching users and groups) 'NETMDDMEV SYNC SOURCE (TEST)' [Run as owner 'rsalgado_dev']9/20/04 14:17:33- Creating the Everyone In Auth Source group (if one doesn't already exist).9/20/04 14:17:33- **********************************************************************************9/20/04 14:17:33- Sync Agent is processing groups.9/20/04 14:17:34- Authentication Synchronization Job's call to retrieve the groups on this auth source failed. Please check that the authentication source server is online.*** COM exception was: IDispatch error #19876 (0x80044fa4): [SOAP fault: faultcode='soap:Server' faultstring='Server was unable to process request. --> Object reference not set to an instance of an object. error setting up group query: GetGroupsInternal Error in GetGroups']9/20/04 14:17:34- *** Job Operation #1 failed: ProcessGroups failed (0x4)9/20/04 14:17:34- Done with job operations.
    You guys have any ideas on what is going on here???
    Please excuse my newbiness on this as I have not setup/configured/ran an AD authentication import and sync job before... Please let me know if I am doing setup / config of any releveant elements wrong...
    Ray Salgado

  • Final Cut Express v3.5 HD - Setup/Config. Tips

    Hi Everyone,
    I'm looking for some assistance regarding the setup of Final Cut Express HD v3.5. on my system I have downloaded the Apple "on-line" FCE documentation, but I thought I would try gaining some "real-life" insight about installing and cofiguring FCE from this discussion board, as I'm new to Final Cut Express. I have used other NLEs (Pinnacle, Avid, etc.) so I'm familiar with a few editors, in general.
    My system is: iMac 2.8 Ghz Extreme with 4GB memory and a 500GB internal disk. I have (1) LaCie 250GB External drive via 1394 Firewire (my video ingest drive) and (1) Western Digital 500GB USB External Disk used for content (video, images, graphics, Digital Juice, etc.). Lastly, I have an old MovieBox Deluxe (Video Capture/Convertor) via 1394 port. I doubt it will work with the iMac, as it is proprietary Avid/Pinnacle hardware.
    I was going to use my 500GB external drive as my "scratch" drive and leave everything else alone for now. The iMac will be a standalone video editing system...no other software loaded on it, except what comes loaded as the standard (OS X 10.4.10, iLife, Safari, etc.)
    My hope is to leave the internal drive (loaded with FCE) alone. Should I save my FCE projects to the internal drive? or save to an external?
    Is this how I should setup the drives, etc.? Or do something different?
    I really appreciate your advice and help, as I'm a "newby" to the discussions boards. I finally got tired of doing everything with a WinTel box. I saw the light!
    Thanks for your assistance!
    WBMP

    Hi Everyone!
    Regarding setup and config of FCE, I've been reading several discussions about scratch drives. While I plan to use one of my external drives as the scratch drive and the other as my video ingest drive, should I SAVE my projects to the internal 300GB drive which FCE resides? or should I SAVE projects to a different drive?
    I'm trying my best to setup my iMac so FCE and the drive it resides on is the LEAST disturbed (with other content or files) to prevent fragmentation. So my media content (i.e. Digital Juice) is on a seperate drive, video ingest, yet, on another seperate drive, etc., etc. Without beating the horse, what is the BEST way to setup my iMac? I guess I've been reading too many horror-stories about scratch drives, conflicts, etc.
    After reading several messges, I notice many discussions about still photo images (with/without transitions) becoming "jittery" upon render completion in FCE and FCP/Studio? Are still images a problem for FCE 3.5? or are these sporadic, based on a mac users configuration and what is being accomplished?
    Lastly, what are the necessary utilities (convertors, etc.) to purchase in support of editing with FCE? I see lots of utilities recommended for various things and I want to make sure I get the best utilities.
    Thanks!
    WBMP

  • User Account Setup & Config Tips for Two Macs

    Greetings,
    Can someone please explain the importance of lowercase vs. uppercase letters and the use of spaces in the Mac OS when setting up user accounts? I'm sure there must be some UNIX, LDAP, or X.500 directory explanation out there given OS X's UNIX underpinnings.
    The reason I ask, is that I have recently switched to the Mac OS from Windows, and there seems to be an emphasis on using lowercase letters and spaces in the Full Name, Account Name, and Home Directory Name when setting up your OS X user account. I have tried Googling this and I can find all kinds of articles on how to change these settings post OS install and the importance of keeping your account name and home directory name the same but nothing that explains why you should only use lowercase letters.
    For example, in real life, I go by my middle name. So in the "Full Name" field in System Preferences -> Accounts I have entered my Middle and Last name with a single capital letter for each name a space in between the two.
    Full Name looks like this: "Middle Last"
    For the "Account Name", I have entered a nickname I have had for years that does not match or have anything to do with my legal name that I entered for the "Full Name". While the Mac OS prohibits you from entering spaces in this field, it does allow you to enter uppercase letters. The name I entered here is a two part name, and I have capitalized the first and second parts for easier reading.
    Account Name looks like this: "NickName"
    My Home Directory matches my Account Name above and looks like this in the Finder: "NickName"
    I've also linked my MobileMe user name to this account and it looks like: "middle.last"
    Question: Should I recreate my user account and get rid of the uppercase letters in the full name, account name, and home directory name?
    Another question I have, would it be advisable to set up identical user accounts given that I have a iMac i7 in my office and a Mac Mini in my living room? I would be the only user for both machines.
    I would like to set up my Mac Mini to be a central repository for all my music, iPhoto projects, and iMovie projects. I would like to share my iTunes music on the Mac Mini using the Home Sharing feature of iTunes. Eventually I want to set up MythTV on the MacMini and use it as a DVR.
    I want my iMac i7 to store all my documents and pictures. I want to create and edit iPhoto & iMovie projects on my iMac, but store what I create on the Mac Mini. That way when people come over to visit, we can sit on the couch rather than gather around my desk in my 2nd bedroom.
    Eventually I want to set up an external hard drive on the Mac Mini and use Time Machine on both computers to backup to the Mac Mini's external hard drive since I will leave the Mac Mini on 24x7.
    Thank-you,
    Derrick

    Simply put there is nothing wrong with your name or account configuration. Although it is customary in Unix systems to use all lowercase for an account name, what you have setup is certainly acceptable. Passwords also can be a mix of lower and uppercase but should be limited to alphanumerics only.
    As for the two machines you will find it much more convenient to have everything configured identically on both machines to avoid issues with file permissions.

  • Installer silent install - modify Setup config

    Hi all,
    Using LV 2009.  Built installer which includes my own licence agreement.
    Upon installation by the user my own licence agreement (not NI's) is all I want them to see, then my application and LV run-time should install (silently).
    Can I achieve this merely by modifying the setup.ini in the Installer folder?  The following seems to work:
    [Dialogs]
    UserInfo=0
    FeatureInfo1=0
    SingleDirectory=0
    InstallationType=0
    FeatureTree=0
    License=1
    License2=0
    NICertificate=0
    ConfirmStart=0
    End=1
    Does anyone envisage any problems with doing this?  I cannot test because I cannot uninstall the LV RTE (anybody know how to do this?).
    There is another entry at the very bottom of the setup.ini file which I've set to 0 (not sure if it does anything:
    [SilentInstallRequirements]
    MustAcceptLicenses=0
    In the past I've read a lot about SPEC files and command line entries to achieve silent install.  If I can do it by changing the setup.ini then why would I bother with a SPEC file?
    Your insight is appreciated.  Happy Christmas!
    Battler.

    battler.,
    I was unable to find public documentation as to what those entries in the ini file actually do.As of LabVIEW 8.0, the Run-Time Engine does not give you an option to manually uninstall. This is because other NI applications (Signal Express, Example Finer, etc.) rely on these RTE and will break if the component is removed. If you uninstall all the dependent software, the Run-Time Engine should uninstall itself. Also, if you manually install the RTE, and there are no dependent applications also installed on the computer, it will show up in the Add/Remove Programs list. Knowing this, I think the easiest way totest your installer is to find a machine with no NI software. Once you run your installer, you should be able to explicitly remove the LV RTE as long as no other NI software was installed.
    Also, I did find this KnowledgeBase that shows how to install the LabVIEW Run-Time Engine without any prompts for the user. It is related to using the command line entries you mentioned.
    Hope this helps, happy holidays!
    Peter Flores
    Applications Engineer

  • SRM XI Config info

    Hi All,
       Please guide me to the path where I can get XI configure info for SRM EBP 4.0 with Server 5.0
    Thank you,
    Sree

    HI,
    Go to Service Market place- here is the link- there are master guides
    https://websmp207.sap-ag.de/instguidesnw04 ->mySAP Business Suite Solutions->mySAP SRM->Using SAP SRM Server 5.0
    Regards,
    Moorthy

  • DVD STUDIO PRO 2 SETUP/CONFIG

    Hey Gang,
    New to this forum and I need some advice.
    I have DVD Studio Pro 2 and have just downloaded the updates from the Pro download page (DVDSP 2.05, etc).
    I'm running OSX 10.2.8, w/768Ram, 60gb free HD space.
    iMovie 4.01 (I have FCP 2.X but never used it)
    Quicktime 6.5.2
    I would appreciate any suggestions on maximizing my system for DVDSP 2 with the above specs.
    I have owned this product for years (just found the time to get into the manuals, tutorials etc. to learn it) and I would like the learning process to be as smooth as possible.
    Is trying to get an upgrade to DVDSP 3 worth the hassle plus the expense?
    I'm not much of a geek and have little time to experiment, so I plan on upgrading my system when High Definiton is or about to become the De Facto standard and the prices for all the necessary gear (software/hardware) have come down and/or improved. Right now I would like to work with what I have if possible.
    Hopefully this time next year I'll be ready to move up to the Studio pkg. with a new system.
    Thanks

    Saugidaug
    I don't know the answer to your question, however, it may be to your advantage to post a new topic.
    1.)When you first enter the DVD Studio forum at the top left of the screen you'll see Forum: DVD STUDIO Pro in bold letters
    2.)Underneath that you'll see "post new topic".
    3.)Click and you can create your own topic/thread [B}Sending DVD Studio Pro audio to Sountrack Pro
    4.)Be sure to state what version of DVDSP you're using.
    5.)then members will reply to your specific question/problem.
    PS: I'm in the same boat as you (seeking info). I'm still waiting for someone to provide me with info regarding DVD Studio pro 2.

  • Print Server Setup/Config

    ok, i have a 2008 R2 server that i added the print server role too.
    i have been following this article: http://technet.microsoft.com/en-us/library/cc753109(v=ws.10).aspx 
    but my question is when i add a printer by IP address (the search brought up 0 results) do i need to leave the "Share Printer" box checked? or uncheck it? 
    after i add the printers to this server, i will then go to our AD Server and connect the print server in the print management console that is there on the main AD/Domain Controller. 
    also plan to create a user based GPO to so specific users will be mapped to printers. do i need to create/add printers to the same OUs that the users are in in ADUC? 
    i want to get the server right before i add it into AD as a designated PS.

    In order for clients to connect to the shared printers, the Shared box needs to be checked.
    Printers can be Published but that is not a requirement to deploy connections to the shared printers.
    If you would like printers discoverable when clients attempt to find them in the domain, then Publishing the print objects to the domain would be needed.
    Alan Morris formerly with Windows Printing Team

  • Coherence Extend Config:   Client  create a new Cluster

    Hi,
    I have configured one storage-enabled coherence node and one proxy server on port 9099 as shown in the wiki. Coherence client is configured with the right -Dtangosol.coherence.cacheconfig which points to the xml file with
    +     +<remote-cache-scheme>++
    ++               <scheme-name>extend-dist</scheme-name>++
    ++               <service-name>ExtendTcpCacheService</service-name>++
    ++               <initiator-config>++
    ++                    <tcp-initiator>++
    ++                         <remote-addresses>++
    ++                              <socket-address>++
    ++                                   <address>Proxy_IP</address>++
    ++                                   <port>9099</port>++
    ++                              </socket-address>++
    ++                         </remote-addresses>++
    ++                         <connect-timeout>10s</connect-timeout>++
    ++                    </tcp-initiator>++
    ++                    <outgoing-message-handler>++
    ++                         <heartbeat-interval>5s</heartbeat-interval>++
    ++                         <heartbeat-timeout>4s</heartbeat-timeout>++
    ++                         <request-timeout>50s</request-timeout>++
    ++                    </outgoing-message-handler>++
    ++               </initiator-config>++
    ++          </remote-cache-scheme>++
    My Client logs shows that it has created a new cluster and then it loaded the Dtangosol.coherence.cacheconfig xml file. Is there a way to prevent my client starting a new cluster? Is configuration incorrect? Any help will be greatly appreciated :)
    Client Log:
    ======
    2011-02-10 04:39:37.599/0.599 Oracle Coherence 3.6.0.1 <Info> (thread=main, member=n/a): Loaded operational configuration from "jar:file:/usr/share/java/coherence-3.6.0.1.jar!/tangosol-coherence.xml"
    2011-02-10 04:39:37.606/0.606 Oracle Coherence 3.6.0.1 <Info> (thread=main, member=n/a): Loaded operational overrides from "jar:file:/usr/share/java/coherence-3.6.0.1.jar!/tangosol-coherence-override-dev.xml"
    2011-02-10 04:39:37.606/0.606 Oracle Coherence 3.6.0.1 <D5> (thread=main, member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified
    2011-02-10 04:39:37.615/0.615 Oracle Coherence 3.6.0.1 <D5> (thread=main, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
    Oracle Coherence Version 3.6.0.1 Build 17846
    Grid Edition: Development mode
    Copyright (c) 2000, 2010, Oracle and/or its affiliates. All rights reserved.
    2011-02-10 04:39:38.112/1.112 Oracle Coherence GE 3.6.0.1 <D4> (thread=main, member=n/a): TCMP bound to /172.23.73.236:8088 using SystemSocketProvider
    2011-02-10 04:39:38.432/1.432 Oracle Coherence GE 3.6.0.1 <Info> (thread=Cluster, member=n/a): This Member(Id=3, Timestamp=2011-02-10 04:39:38.236, Address=172.23.73.236:8088, MachineId=62188, Location=site:lss.emc.com,machine:lglor236,process:5631, Role=ApacheCommonsDaemonDaemonLoader, Edition=Grid Edition, Mode=Development, CpuCount=4, SocketCount=4) joined cluster "*cluster:0xC4DB" with senior Member(Id=2, Timestamp=2011-02-10* 04:33:09.003, Address=172.23.73.236:8090, MachineId=62188, Location=site:lss.emc.com,machine:lglor236,process:4193, Role=ApacheCommonsDaemonDaemonLoader, Edition=Grid Edition, Mode=Development, CpuCount=4, SocketCount=4)
    2011-02-10 04:39:38.439/1.439 Oracle Coherence GE 3.6.0.1 <D5> (thread=Cluster, member=n/a): Member 2 joined Service Cluster with senior member 2
    2011-02-10 04:39:38.440/1.440 Oracle Coherence GE 3.6.0.1 <D5> (thread=Cluster, member=n/a): Member 2 joined Service Management with senior member 2
    2011-02-10 04:39:38.440/1.440 Oracle Coherence GE 3.6.0.1 <D5> (thread=Cluster, member=n/a): Member 2 joined Service DistributedCache with senior member 2
    2011-02-10 04:39:38.442/1.442 Oracle Coherence GE 3.6.0.1 <Info> (thread=main, member=n/a): Started cluster Name=cluster:0xC4DB
    Group{Address=224.3.6.0, Port=36000, TTL=4}
    MasterMemberSet
    ThisMember=Member(Id=3, Timestamp=2011-02-10 04:39:38.236, Address=172.23.73.236:8088, MachineId=62188, Location=site:lss.emc.com,machine:lglor236,process:5631, Role=ApacheCommonsDaemonDaemonLoader)
    OldestMember=Member(Id=2, Timestamp=2011-02-10 04:33:09.003, Address=172.23.73.236:8090, MachineId=62188, Location=site:lss.emc.com,machine:lglor236,process:4193, Role=ApacheCommonsDaemonDaemonLoader)
    ActualMemberSet=MemberSet(Size=2, BitSetCount=2
    Member(Id=2, Timestamp=2011-02-10 04:33:09.003, Address=172.23.73.236:8090, MachineId=62188, Location=site:lss.emc.com,machine:lglor236,process:4193, Role=ApacheCommonsDaemonDaemonLoader)
    Member(Id=3, Timestamp=2011-02-10 04:39:38.236, Address=172.23.73.236:8088, MachineId=62188, Location=site:lss.emc.com,machine:lglor236,process:5631, Role=ApacheCommonsDaemonDaemonLoader)
    RecycleMillis=1200000
    RecycleSet=MemberSet(Size=0, BitSetCount=0
    TcpRing{Connections=[2]}
    IpMonitor{AddressListSize=0}
    2011-02-10 04:39:38.477/1.477 Oracle Coherence GE 3.6.0.1 <D5> (thread=Invocation:Management, member=3): Service Management joined the cluster with senior service member 2
    Feb 10, 2011 4:39:38 AM org.springframework.context.support.AbstractApplicationContext prepareRefresh
    INFO: Refreshing org.springframework.context.support.ClassPathXmlApplicationContext@257b40fe: display name [org.springframework.context.support.ClassPathXmlApplicationContext@257b40fe]; startup date [Thu Feb 10 04:39:38 EST 2011]; root of context hierarchy
    Feb 10, 2011 4:39:38 AM org.springframework.beans.factory.xml.XmlBeanDefinitionReader loadBeanDefinitions
    INFO: Loading XML bean definitions from class path resource [configurationRestApplicationContext.xml]
    Feb 10, 2011 4:39:38 AM org.springframework.context.support.AbstractApplicationContext obtainFreshBeanFactory
    INFO: Bean factory for application context [org.springframework.context.support.ClassPathXmlApplicationContext@257b40fe]: org.springframework.beans.factory.support.DefaultListableBeanFactory@4bd27069
    Feb 10, 2011 4:39:38 AM org.springframework.beans.factory.support.DefaultListableBeanFactory preInstantiateSingletons
    INFO: Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@4bd27069: defining beans [component,server,router,srmconfigurationsresource,srmconfigurationtyperesource,srmconfigurationresource,coherenceStatusResource,configurationMapRepository,configurationOVFFileLoader,defaultConfigurationLoader,feedpagingLinkHandler,adminConfigTransformer,configurationMapQueryHandler,fileUploadResource,postProcessorImpl]; root of factory hierarchy
    [Fatal Error] :-1:-1: Premature end of file.
    [Fatal Error] :-1:-1: Premature end of file.
    *2011-02-10 04:39:39.332/2.332 Oracle Coherence GE 3.6.0.1 <Info> (thread=main, member=3): Loaded cache configuration from "file:/etc/sysconfig/proxy_node.xml"*
    2011-02-10 04:39:39.504/2.504 Oracle Coherence GE 3.6.0.1 <D5> (thread=DistributedCache, member=3): Service DistributedCache joined the cluster with senior service member 2
    Also I have verified that my storage enabled node and proxy node have formed a cluster...
    The client has been started with -Dtangosol.coherence.cacheconfig=/etc/sysconfig/proxy_node.xml
    Thanks & Regards,
    Sandeep

    Hi,
    Used -Dtangosol.coherence.tcmp.enabled=false to disable TCMP mode... ( Phew... :) )
    In my client code we have the following statements...
    *==> Service service = CacheFactory.getService("DistributedCache");*
    *          Set<Member> storeEnabledSet = ((DistributedCacheService) service)*
    *                    .getStorageEnabledMembers();*
    *==> CacheFactory.ensureCluster();*
    Does this needs to be changed for an Extend Client configuration?
    With my current setup I am getting exceptions ...
    2011-02-13 22:36:59.075/111.151 Oracle Coherence GE 3.6.0.1 <Error> (thread=main, member=n/a): Error while starting cluster: java.lang.UnsupportedOperationException: TCMP clustering has been disabled*; this configuration may only access clustered services via Extend proxies.*
    at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:42)
    at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
    at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:3)
    at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:7)
    at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
    at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
    at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:998)
    at com.emc.srm.admin.config.rest.RestApplicationLauncher.waitForCacheServer(RestApplicationLauncher.java:155)
    at com.emc.srm.admin.config.rest.RestApplicationLauncher.main(RestApplicationLauncher.java:108)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.emc.srm.common.daemon.SrmDaemon.start(SrmDaemon.java:59)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.commons.daemon.support.DaemonLoader.start(DaemonLoader.java:219)
    Any ideas on how to fix this?
    Regards,
    Sandeep
    ===========================
    Client configuration:
    <cache-mapping>
                   <cache-name>ConfigurationMapRepository</cache-name>
                   <scheme-name>extend-dist</scheme-name>
    </cache-mapping>
         <caching-schemes>
              <near-scheme>
                   <scheme-name>extend-near</scheme-name>
                   <front-scheme>
                        <local-scheme>
                             <high-units>1000</high-units>
                        </local-scheme>
                   </front-scheme>
                   <back-scheme>
                        <remote-cache-scheme>
                             <scheme-ref>extend-dist</scheme-ref>
                        </remote-cache-scheme>
                   </back-scheme>
                   <invalidation-strategy>all</invalidation-strategy>
              </near-scheme>
              <!-- Event Repository cache scheme definition START -->
              <remote-cache-scheme>
                   <scheme-name>extend-dist</scheme-name>
                   <service-name>DistributedCache</service-name>
                   <initiator-config>
                        <tcp-initiator>
                             <remote-addresses>
                                  <socket-address>
                                       <address>X.X.X.X</address>
                                       <port>9099</port>
                                  </socket-address>
                             </remote-addresses>
                             <connect-timeout>10s</connect-timeout>
                        </tcp-initiator>
                        <outgoing-message-handler>
                             <heartbeat-interval>5s</heartbeat-interval>
                             <heartbeat-timeout>4s</heartbeat-timeout>
                             <request-timeout>50s</request-timeout>
                        </outgoing-message-handler>
                   </initiator-config>
              </remote-cache-scheme>
    </caching-schemes>

  • Has anybody implemented SUS in SRM 5 - Extended classic - pls help

    Hi There,
    I would like to hear from anybody who has implemented SUS in SRM 5 - Extended Classic.
    A client of mine is considering implementing SUS - SRM 5. I cannot find any SAP SUS related docuemntation for the Extended Classic scenario.
    Do you have any helpful imformation i.e setup,config and tips that you can share with me.
    Many thanks for your help in advance.
    Thanks,
    Sheena

    Hi Sheena,
    Please have a look at the link:
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/srm/business+scenarios
    Here you will find usefull information, like:
    https://service.sap.com/~sapidb/011000358700002897382004E/Plan-DrivenwithSInew.pdf
    Regards,
    Peter

  • Site Recovery Manager (SRM) v6.0 fails to pair sites - certificate chain not verified

    I have used the default self-signed certificates throughout the vCenter and SRM setup.  When going to pair the vCenters, I get "Server certificate chain not verified".  These are 2 new VCSA 6.0 VMs (embedded PSCs for each) and 2 new Windows 2012 R2 servers to run SRM 6.0.  I can view the Site in each respective vCenter but can't pair them.  Does anyone have suggestions?  We have tried valid SSL certs before on our original 6.0 deployment and continuously run into these certificate chain not valid errors.

    Yes, I always used the FQDN.  This issue was actually the result of having an incorrect vCenter topology.  The error resulted in us spending hours with support all around valid or self-signed certs.  In the end, I had to completely redeploy new VCSA 6.0 appliances and follow the 3rd recommend topology.
    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2108548
    With this setup, it also links the vCenters and it seems to be much quicker than Linked Mode in previous versions.  I was able to pair the sites in SRM without issue.  FYI, I am using self-signed certs all around at the moment.  SRM is very finicky about trust with SSL certs so I won't try implementing valid SSL certs until I get some working failovers.

  • Best practice document for SRM

    Hi all
    Is there a best practice document for SRM setup and Qucksizing tool for SRM-MDM
    thanks

    Hello,
    SRM related best practice building block is S60 - Self-Service Procurement (Procure 2 Pay)
    Please find the link:
    http://help.sap.com/bp_bblibrary/600/html/S60_EN_DE.htm
    Hope this will be useful.
    Thanks
    Ashutosh

  • URL generation in POWL in SRM (Vendor empanlement Request)

    Dear Experts,
    We have hosted our SRM Setup on Internet for Vendors.
    All links are working fine but the display link in POWL screen is opening up with "Internalserver url"
    Please let me know if we need to do some setting in POWL to make it call external URL
    Please note that we have tried creating entries in HTTPURLLOC table but it has not worked
    Regards,
    Akhilesh

    Please reply..
    anyone listening

  • ICI Telephony web client 'installation' or 'config'

    hello
    we are looking at setting up telephony integration with our NW04s landscape - ecc, crm etc all are in use.
    We will be using a CRM interfaction centre, but wondering - from a basis admin perspective - what is there to do for installation and setup??
    As most SAP user interaction will be portal based, I'm assuming I want to use the webclient aspect of ICI.  Does that then call BSP's on the backend CRM system?
    Does anybody know if there are any install guides available or more information on setup, config etc??
    regards
    W.

    As far as i know CRM interaction center is installed by default on CRM 2007.... anyhow.. you'll find all the info you need at the CRM Master guide on SAP Marketplace.
    Regards
    Juan

  • Workshop Weblogic config questions

    I'm using Oracle Workshop for WebLogic 10.3 and I'm hoping someone can answer some setup/config questions.
    When I double click on the server (WebLogic Server v10.3 at localhost) a window opens with various settings that manage how workshop and weblogic work together.
    Under "Startup & Deployment" I have the following turned on:
    Launch WebLogic server in Eclipse console
    Always start WebLogic Server in debug mode
    Ignore project compilation errors when publishing (I have this turned on because of errors in a portal project, the errors aren't inmportant, and don't prevent the project form running)
    Run stand-alone web module directly from workspace
    So, first question, with these settings I was able to quickly switch to debug mode, with out restarting the server, now the server restarts whenever I turn debugging on. What have I done that has stopped this working correctly? How can I get it to start debugging without a full restart?
    next question, what happens if I turn on "Start WebLogic Server in Express Mode"? As far as I can tell nothing happens.
    Lastly, under "Automatic Publishing" I have it set to "Never publish automatically", if I choose another setting workshop essentially freezes because it's constantly publishing. So whenever I make a change, even in a jsp, I need to remove the project, then re-add it to see my changes in the browser. This is frustrating, not just because it takes 8 or 9 minutes (8 or 9 MINUTES!!!), but because the project doesn't run properly until it is redeployed. You'd think that if it needs to be re-deployed, then none of my changes should matter on the server until it is re-deployed.
    So, my question is, Is there any way to get this re-deployment to happen faster?
    Thanks for any and all help

    Well, in my experience performance is not bad as you experienced. Is it locally connected server or remotely connected server? If it is a remote server, network issue could cause this latency issue.
    Is performance better if you run the server without enabling debug mode? If yes, probably you can also review any break points set.
    You could also try out the following options
    1) Run workshop with -clean option, by opening command prompt and navigating to workshop_home\'workshop.exe -clean'
    2) Untick the option 'Launch WebLogic server in Eclipse console' and start server which would enable server to start on command prompt
    3) This would enable you to take multiple thread dumps (cutl +Break) on the server console output, while performance is very bad, to see where threads are halt.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

Maybe you are looking for

  • Is there a way to automatically add the filename in the page header when batch printing text files directly from finder?

    hello, i have 80 text files (docx). the finder preview works great and i can open them in pages. I need to batch print them from finder: I select all the documents > drag on printer's icon> printer puts them in queue ( after an on the fly pdf convers

  • ACE 4710 - show stats connection questions

    Hi, I have three questions regarding the "show stats connection" command in the ACE 4710: 1. What is the criteria for a connection to be added to the "Total Connections Failed" counter? 2. What is the criteria for a connection to be added to the "Tot

  • Person responsible inheritance

    Hello Guys, I am just wondering is there any std way to have the person responsible name from maintenance plan to work order ? I don't see any field in maint plan to put the person name which will inherit to work order and also in the shop paper. I h

  • How do I stop Adobe Photoshop Album from launching when I attach my iPod?

    I don't want Photoshop to go searching for pictures every time I attach my iPod. I can stop & cancel it easily enough but it's a nuisance to have to do this. Is there some way to stop it from launching? iPod Photo 60Gb   Windows XP  

  • Is Huey any good?

    I'm using an Apple 20" LCD, and I've done the software calibration and created a custom monitor profile. However, the more i learn about colour management, the more i feel i should calibrate my monitor corectly, ie using hardware. Bearing in mind im