SRM-SUS and https in a development environment.

Hello experts,
After installing and configuring SRM-SUS, we try to access the system. However, we always get the following error:
SAP Note
The following error text was processed in the system:
BSP exception: Access to page default.htm requires HTTPS. HTTPS has not been configured on this server
How can we access SUS by HTTP, since this is an internal development environment?
We are using SRM 5.0 SPL 9
Thanks for your support
Regards,
Gilberto Gallardo

You can try the following and see the system behaviour.
1)start transaction se80
2) select BSP application and SRMSUS.
3) and find the page default.htm.
4)Go in to the properties tab of the page , there will be option to maintiain flag wether
it is http (or) https.
see wether you can change to http here and then start the system.

Similar Messages

Xcode download from the app store trashed by development environment and I cannot recover by downloading again

I downloaded xcode and it trashed my development environment.
I had previously installed an earlier version.
My purchased apps page does not list XCODE. However, If I go to the XCODE download page in the App, it lists it as installed.
Any suggestions would be gratefully accepted.

Go to your Spotlight search. (Swipe from left to right at your primary home screen.)
Type in 'Facebook'.
You should see your Facebook app.
Unless you held down an app icon until it 'wiggles', then hit the black 'x' to delete it, you didn't delete the app.

Setting Up Shared Development Environment

Is there any diagrams, white papers, guides or best practices on setting up the J-Developer and connecting to shared Services and database? The Developer guide (E10148.pdf) does not really cover what the standards is or the overall infrastructure of the JDeveloper and setting up a Shared Developer enviroment.
I looking for something like http://docs.oracle.com/cd/E25178_01/fusionapps.1111/e15524/gs_install_e.htm but for (11.1.1.6.0) version webcenter.
I basically looking for something to help me get our Shared Development Environment setup with Jdeveloper.

The issue is connecting the Jdeveloper to the WebCenter DS and Activity DS schemas. In the Development guide it says I need to connect to these schemas to be able to utilize several of the WebCenter Services, ( http://docs.oracle.com/cd/E21764_01/webcenter.1111/e10148/jpsdg_svc_intro.htm#BHCDJHAI - 7.2.2 Setting Up a Database Connection
We are trying to set up the connection to our shared development environment database. Our database group is concerned with giving developers access to these schemas. They are concerned that JDeveloper will changes or modify the schema and cause the database to fail. They created a account with read only access but we are not sure it this will work.
I been trying to find anything in the documentation to find what access JDeveloper needs to the WebCenter DS and Activity DS schemas and if JDeveloper can modify these schema in any way.
Additionally try to find anything on the best practices on connecting to a shared database and setting up a Development environment and its connection to Jdeveloper .

PI 7.0 with SRM-SUS

Hello:
We want to install SRM-SUS and integrate it with MM and with other SRM installation. As we know we need PI for the integration. We've PI 7.0. Do you know if we need to migrate to 7.1 or the standard interfases for SAP-SUS can use PI 7.0 ?
Thanks in advance.
Fernando.

Hello:
We want to install SRM 7.01, is this version compatible with PI 7.0?. We suppose it, but it's a very recent version and we want to confirm this point.
Thanks again.

SRM SUS Supplier operating in more countries?

Hi all.
SRM SUS 7.0
We are implementing SRM SUS, and my question is quite simple: A vendor that in ECC has more than 1 purchasing organization, how can I distinguish among those in SUS so that not all contact persons are receiving the PO?
I would expect to simply use either the purchasing org or company code, but the organizational setup for SUS is so limited, that the EKORG og BUK are not even considered.
Supplier ABC operates in EKORG 1 and 2; with 1 overall SAP vendor number. That's standard. In SUS the supplier is created in the PPOMV_BBP with no respect to BUK, and EKORG is not even a parameter/an attribute you can use while creating the vendor org units. When the supplier is replicated to SUS, it is created in PPOMV_BBP. Then you create a contact person in SUS to let SRM know who to send the PO for this vendor number to. However, the contact person does - again - not take either BUK or EKORG into consideration.
I can only see that if you use SAP ECC with 1 overall vendor number for multiple purchasing organizations, then SUS will not be able to distinguish and send the "New PO in SUS" info to the right contact persons, since there seem to be no organizational setup for SRM SUS...
I hope I am overlooking something simple, so any input is valid!

Hi Sam.
Thanks for the input. However, what you state is not accurate for our scenario at least. In MN04 we simply control the output conditions in ECC - however, for our MM-SUS implementation given our current ECC/SRM releases, we use XML out from ECC and into SRM again; not regular output conditions.
And my issue is still the following:
Functional scenario:
Supplier called ABC operationg in 2 countries but with 1 overall vendor number
Contact Person 1 created for vendor; this is in pur org 200
Contact Person 2 created for vendor; this is in pur org 300
Contact 1 should only see POs in pur org 200 in SUS; Contact 2 should only see POs in pur org 300 in SUS.
In ECC, this would be vendor ABC and create him in the 2 different pur orgs; no problem. In SUS, however, the vendor master (or BP) does not use the purchasing org in any case. And when creating the contact person in SUS for the overall vendor ABC, there is no org maintenance either. Therefore, all POs from ECC to SUS will be sent to both contact 1 and 2 because SUS does not seem to know how to handle 1 vendor number with multiple purchasing organizations.
This sounds strange to me! Any other input?
Edited by: Solar SCM on Jan 10, 2012 12:05 PM

EDI Standard used in SRM-SUS for Purchaser - Vendor Document Exchange?

Hi Forum,
For exchange of electronic documents like ASN, PO, PO Response, Confirmations etc. between buyer and seller, which EDI standard is used in SRM-SUS?
Say there are two different vendors one from North America using ANSI X 12 as EDI Standard and other from Europe using EDIFACT, how is the document exchange handled for these two different seller / edi standard in same SUS system?
Thanks,
Anubhav

Hi,
I am not sure what standard SAP uses, but it is not really relevant. At least not for the SUS scenarios. The IDOCs from ECC will be sent to the PI system which will convert them to XML format and send it to the SUS system. Since both PI and ECC system are from SAP, they will speak the same EDI standard for sure.
For SUS we have two scenarios, SRM-SUS and MM-SUS. In SRM-SUS the PO is created in an SRM system locally and sent to SUS. All communication will take place between these two system via XML messages on both sides (of course a PI system is mandatory in this case as well).
In the MM-SUS scenario the PO will be created in ECC and transferred to SUS. Depending on ECC release there are two different possibilities for this, either the ECC system sends EDI IDOCs or it sends XML messages directly. IDOCs will be mapped to XML by PI in all cases, as the SUS system will always receive and send XML messages only.
regards
Zoltan

OAF shared development environment, 3 continents

I'm looking for some opinions on how to structure the OAF development environment for a small project, tight deadlines, and a few developers on 3 continents.
We have about 15 OAF pages to develop. Vision DB test instance is in US. Two developers in India and one in Latin America. Time is of the essence, with a short deadline.
This is my first project with JDeveloper and OAF, and I'm being told it is impractical for a developer to not have a local copy of Vision, and to keep the database in sync with the main test instance. Their plan is to update the development instance with the results of their work once per day.
I understand that Jdeveloper is a PC-based application, but I expected it to be more tightly integrated with the host (our Vision instance in the US). I have assumed that if the developers have a 2 mbit/sec network connection, they should not have to have their own copies of the host environment to do incremental page development and testing. The overhead of having to move things back and forth seems like it would slow down the process and lead to possible disconnects between different developers.
I may have been spoiled by the speed of development using Application Express, and the way the development environment is oriented to support teams.
Any advice and opinions are welcome.
If there's a better forum for this question, please let me know.
Best rgds,
Skip

Skip
You can have the jdeveloper installed on any machine in US and the person from india can work on that machine remotely. Like this there will be less network issue in comparison to one running locally jdev and accessing US server from that machine.
Thanks
AJ

SRM SUS: Can supplier create PO?

Hi Experts.
SRM 7.0.
I have a scenario where we wish to allow some suppliers the opportunity of creating purchase orders via the portal - we are implementing SRM-SUS, and the standard scenario is that a PO is created in our backend, and the supplier can then access this via the portal. Now, is there any way that the supplier through the portal is able to create a PO, that will then get transfered to my backend? I believe I read somewhere that this could be possible, perhaps when using contracts that the vendor could then access through the portal etc.
Any comments on this? Basically: Does SRM-SUS support a functionality where the supplier creates the PO in the portal?

Hi Dennis
Buyer(Purchaser) always creates a Puchase order in SRM or ECC . Supplier only should accept or reject the PO and supplier can send ASN /GR/Invoice and it will be validated in our ECC or EBP systems
Br
muthu

Install AD / SQL Server 2012 and SharePoint 2013 on a single server as Development Environment

Hi All,
I'm planning to prepare a SharePoint 2013 development environment. The current idea is to install Domain controller, SQL Server 2012 and SharePoint 2013 all on a single server. Even though this is for development purposes,
would there be any limitations specially when it comes to SP 2013 functionalities according to your experience?
Some articles i referred.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
http://social.technet.microsoft.com/Forums/en-US/f438c9a6-02e8-43d3-9963-7a0608f0b961/sharepoint2013-on-domain-controller
Thanks,
Dilip

Hi
i understand this is a sandbox environment but you should be able to install everything.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Problem installing Adhoc version to iPhone and iPad - Development Environment Is - Adobe Flash CS6

Hi,
I have successfully submitted 2 versions of the application. There are 2 different versions for iPad and iPhone separately. These were developed using Adobe Flash CS6 and AIR SDK - 4.0.0.1628. The category is Lifestyle and app is free.
Now I wanted to add new feature of push notification to both iPad and iPhone versions. I have successfully tested the development version with development profiles and certificates over iPad and iPhone.
Before submitting the app to Appstore I was trying to test the Adhoc version with production environment and profiles but application was not installing to the iPad, it is the same iPad that is used for development. But after searching forums and other help Adhoc version was not installed to iPad the solutions that were tried are as under:
1. Create new certificates and profile for Adhoc
2. Change Entitlement tags in Application xml file
3. Remove existing profiles from iPad to avoid error.
4. Update OS version of iPad to 8.1
But once I try to last point - [4] even development version is not installing. Because there are no provision profiles installed.
Can you please help/guide me how to fix it? I need to test both development and Adhoc versions on the iPad and iPhone.
Some more information -->>
// Development Entitlement key - it is working fine with development environment
<Entitlements><![CDATA[
          <key>aps-environment</key>
            <string>production</string>
        ]]></Entitlements>
//Adhoc Entitlement key - it is not working application does not gets installed, icon turns dark and keeps saying installing once you hit the App icon. I am trying to install app using iTunes, after publishsing in Flash CS6 for Adhoc.
<Entitlements><![CDATA[
         <key>get-task-allow</key>
       <false/>
        <key>aps-environment</key>
            <string>production</string>
       ]]></Entitlements>
// If I try installing using install application to connected device after publishing then the error is:
Device Error: Please check if there is enough space on the device.
But I have enough space on iPhone that I am testing. Remember development version is installing successfully and working fine for notifications.
Thanks
PS: I have also posted the same issue under AIR development but there is no reply -
https://forums.adobe.com/message/6862357#6862357

Resolved for iPhone check here
https://forums.adobe.com/message/6862357#6862357
But iPad after updating to iOs8.1 still not installing even development build. I have changed SDK to latest one 15.0.0.302, any ideas?

Where is the built in Java runtime and development environment in my MAC???

I keep reading that my macintosh (dual G5 with OSX 10.4.10) came with a fully configured and ready-to-use Java runtime and development environment, however I cannot find, nor do I know how to open it. Doe anyone know how to open this up? thanks so much!

Your JRE should already be configured so that when you double-click a self-executing jar or open a page with an Applet it will run.
Your compiler (javac) should be available through your sheel in your terminal application.
If none of this helps you (and it may well not) you may want to consider installing an IDE. Eclipse for example has a Mac OS version, I am sure there are others but I do not develop on Mac so I can't tell you about them.
http://www.eclipse.org/downloads/download.php?file=/technology/epp/downloads/release/20071103/eclipse-java-europa-fall2-macosx-carbon.tar.gz

SAP Enterprise Portals and Webdynpro application development environment

Hi,
Is there a way to set up a Development environment for SAP Enterprise Portals and Webdynpro on a laptop/desktop without SAP-GUI.
Any help/guidance will be truly appreciated.
Thanks,
Prasanna

hi,
can you look at this
[http://www.sap-hefte.de/download/dateien/1000/075_leseprobe.pdf]
[http://www.octavia.de/fileadmin/octavia_files/content_bilder/Hauptnavigation/SAP_NetWeaver/WebDynpro/Tutorial_1.pdf]
[http://www.sercononline.com/suntechnovate07/images/images/13%20-%20Rajiv%20Jain%20-%20SAP.pdf]
Regards,
Muralidhar

Development environment and admin console

Hi,
I'm setting up a development environment for about 20 developers working
on 5 or 6 projects.
Is it possible to give each particular project leader access to the
console without system privileges.
It should be allow to start and stop one, and only one, particular WL6.1
server for its project purpose.
The other option is to provide each group a domain with its own admin
server but in that case we (sysadmin) loose control of the servers.
Is there any typical configuration for that purpose ?
Thanks
Philippe Peeters

A quick [url http://www.google.com/search?hl=en&q=%5Bsunm%5D%5BSQLServer+JDBC+Driver%5DThis+driver+is+locked+for+use+with+embedded+applications.&btnG=Google+Search&meta=]google on your error message shows the issue is with your JDBC driver.
A workaround is specified [url http://blogs.sun.com/roller/page/david?entry=creator_sun_java_system_application] here

SRM supplier user synchronization between SUS and productive client

Dear Sirs, in our SRM environement the contact persons (and relative system users) created by suppliers in the auto-registration procedure, should be synchronized between SUS and productive client.
(in our implementation client 150 and 330) .
This sync mechanism should be valid also for lock-unlock status of the user and reset of the password,
but in both cases it does not works (a locked user, manually unlocked from client 150 via SU01, is again locked in client 330, the same from 330 client).
Could you suggest a solution or some checkpoints ?
Could you provide some links for the configuration of this mechanism ? (we have seen only the SPRO node " Maintain Systems for Synchronization of User Data") ?
I am not shure if XI is implicated or not.
Best regards,
Riccardo Galli

HI
Maintain Systems for Synchronization of User Data
In this IMG activity, you specify the RFC destinations to which user data from SUS User Management is replicated.
In the Logical System field, you should enter the backend destination with which the user data should be synchronized when they are entered in SUS. On the basis of this information, the system determines the relevant RFC destination automatically.
Specify the function modules for creating, changing, or deleting a user in the external system for each logical system:
Function Module for Creating User: Function module that is called to create a user in the external system
Function Module for Changing User: Function module that is called to change the user in the external system
Function Module for Deleting User: Function module that is called to delete the user in the external system
If this data exists, you can set the indicator Use Purchasing BP ID to use the business partner ID from the procurement system instead of the business partner ID from SUS.
What are the settings maintained here ?
external system and roles in external system
br
Muthu

Trial version of SAP J2EE engine and Development environment for Windows

Hello,
I am looking for a trial version of the SAP J2EE Development Environment and the corresponding SAP J2EE Engine for windows environment. I looked at the link https://www.sdn.sap.com/irj/sdn/nw-downloads. But the downloads are for the Linux environment. Are there any downloads for the Windows Environment.
Thanks for your help in advance.
Sumit Agarwal.

Hi Sumit,
Currently trial versions of SAP NetWeaver 2004 and 2004s (7.0) are only available for Linux.
Java EE development environment (the latest Java EE version - 5) trial versions for Windows are available in the [SAP NetWeaver CE download section|https://www.sdn.sap.com/irj/sdn/nw-ce-downloads].
HTH!
-- Vladimir

SRM-SUS and https in a development environment.

Similar Messages

Maybe you are looking for