SRM-SUS Single client

Hi All
We have installed SRM 5.0. The SUS component is integrated with it.
However we are not sure whether SRM and SUS components are communicating to each other ?
Could any one confirm what all settings need to be done to activate SUS . If XI is required what all settings required?
Thanks
NNK

hi,
1. Create a link between SAP XI and EBP and SAP XI and SUS
2. If they are on the same client then your life is easy as you need to dot he config only once. This is for activating your proxy.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
3. Once you have done this you have to start doing config in the Integration directory for configuring the Interfaces. I did not get any specific guide for this.
Once you go through allt he namespace you will understand which interface is sender and which is receiver and then you can map the same. For you the sender and receiver would be the same as EBP and SUS are on the same client but it still has to go through XI.
What I did with my functional consultant is he used to generate a scenario which obviously goes into error because the Integration directory is not configured. But i would know that whats the Interface name and who is the sender. then I go to the Integration repository wherein most of the Interface are either _in or _out...so when you get an out just search for _in.
Hope this helps in case you don't have a proper document with you
Regards
Vijaya

Similar Messages

SRM-SUS Single server,Single client

Hi All
We have installed SRM 5.0. The SUS component is integrated with it.
However we are not sure whether SRM and SUS components are communicating to each other ? Could any one confirm what all settings need to be done to activate SUS.
Thanks
NNK

Any suggestions please
NNK

SRM SUS CLIENT

Hi,
What are the pros and cons of having SRM-SUS insatlled in one box to those installed in differnt box.What is the criteria for deciding wether to go for one box or seperate box installation.
In my previous project the only reason we went for 2 Box was security concern is there any technical reason for 2 box
have seen the OSS note 573383 which gives some idea about pros and cons of installing SRM-SUS in one client in one BOX only.
Regards

Hi,
the client is the main difference. Several boxes are mainly a matter of money in terms of Hardware as well Maintenance. I am not sure it that would also count as two different implementations and therefore more license costs. Implementation means to set up basically two SRM systems, where one becomes a SRM Baby and the other the SUS Baby. A bit more effort.
For the pro side the same like for the clients count. SUS can be maintained separately as well security does not get a headache cause external users can be hold more easily in front of the firewall.
These are my two cents.
Cheers,
Claudia

SRM-SUS Scenerio Replicating company code and suppliers to SUS via XI

We have configured SRM-SUS scenario. We have SRM and SUS on the same system but different clients. We have configured extended classic scenario. We are on SRM 2007 with SP5
Issue:
When I execute transaction BBP_SP_COMP_INI I get no errors. I check SXMB_MONI in my SUS client and it has processed correctly. However it does not update table BBP_SUS_BPCMPMAP. I check SLG1 in SRM and SUS and get messages that data replicated.
When I execute transaction BBP_SP_SUPP_INI to move the SRM suppliers to SUS I check SXMB_MONI and everything processed correctly. However, when I check table VENMAP there are no entries.
I then create a PO and send to SUS. I get the following error:
Error in an XI interface: No partner found for partner number VNDR_ACCT_ Program: SAPLBBP_BD_VALUE_MAPPING; Include: LBBP_BD_VALUE_MAPPINGF11; Line: 436
When we debug the proxy it is trying to validate our SRM company code (VNDR_ACCT) in table BBP_SUS_BPCMPMAP which is empty.
It appears that SUS is not allowing the creation of external partners. Does SRM to SUS transfers utilize the BP number range table which distinguishes external and internal BPs which is used when replicating suppliers between ECC and SRM.
Has anyone ever encountered this issue before?
Please advise.
Thanks.
Joe

Hello Nikhil:
I think my issue is that the XI proxys' are not being updated in SUS. It appears to me that it is similar to when you are executing BBPGETVD between ECC and SUS (MM-SUS) and the BP number range in SUS is not set to accept external BPs.
So, When I execute BBP_SP_SUPP_INI and send SRM suppliers to SUS how does it know the VG5XXXXXXX. When I replicate BBPGETVD I tell the VG5XXXXXXXX. I did configure the "Managing Business Partners" SUS configuration but we are not using supplier registration so I do not have URL for UM or Notification. I did update the "Central Vendor Group" , "Default Purchase Org", and "Currency". Does XI use this setting to know where to assign the vendors or is there another piece of configuration I missed?
What I did to create the entry in table BBP_SUS_BPCMPMAP is I executed transaction BBP_SUS_BP_ADM and entered in the "Company Code" field the BP from my SRM system assigned to my ECC backend company code . In the log sys field I entered the log sys of my SRM cleint. I then completed the other required fields. In the end it created the following entry:
101 4CF3AE33A6036B71E10000000AF8EF08 ERACLNT100 0001 0000000018
Client 100 is SRM and 101 is SUS.
I am able to configure SUS for MM_SUS and replicate suppliers and company code from ECC to SUS. However, this does not use XI. For thois reason I think my issue is a missing piece of config to tell XI where to create external business partners?
When I check the payload of my SRM PO it does not show the company code but uses BP 18 which is the SRM BP for my backend company code. When I check BBP_PD for this PO in SRM it has my company code as "BE CO_ CODE"
Do you have any more suggestions?
Please advise.
Thanks.
Joe

SRM - SUS no transaction committed

We are implementing ECC to SUS for Direct Materiall and SRM - SUS for indirect Material. ECC to SUS is working for all processes ( Vendor replication, PO, SAR, PO confirmation, ASN, Invoice).
SRM- SUS is not working. XML is send successfully from SRM to SUS but no transaction is committed. SRM and SUS are on same server but different Client.
Jigar

Hi Jigar
What is the status of XML messages in SRM. Are the messages processed in your SRM Client.
Which transaction is not committed?
Regards
Virender Singh

SRM SUS-Time sheet Approval

Hi All,
My client requirement is Payment of IT service charges to IT Vendor.Right Now it is Manual (Posting directly to GL account).
We want to integrate this process i SAP-MM and SRM-SUS. I heared about Time sheet process from SRM.
can anybody give the process flow for Time sheet application process through SRM-SUS.
regds
Ramireddy

post this query to SRM forum
yogesh

Does SRM SUS support contract negotiation from supplier point of view?

Dear experts,
could you please share your view on whether SRM sus support contract handling? can a supplier monitor contract fulfillment or potential expiry of a contract from SRM SUS side? can supplier take part in contract re negotiation from SUS side?
As far as I know, SRM 7.01 supports scheduling agreement release in SRM SUS.
Your thoughts will be highly appreciated.
Thanks and regards,
Ranjan

Dear Sam,
Thanks for the reply. Then, can we enable our suppliers to monitor contract from Supplier Portal in the SRM server itself like the way Suppliers can participate in the bidding in the SRM server? Any thoughts or input will be highly appreciated as my client wants to enable suppliers to monitor expiry of the contracts from their side.
Thanks and regards,
Ranjan

Integration Builder Configuration. SRM/EBP ---- XI ------ SRM/SUS

Hi Masters of SRM.
could you please show how make the configuration in XI into Builder configurations
the scenario is SRM/ebp -
> XI -
> SRM/SUS
any guide because I have the guide for the ERP----> XI -
>SUS. but does not my requirement.
the both systems are in same box but different client.
thanks for yours atentions

Thanks: Nichil.
I follow your instructions., when I make simulation in Generation Log. show all lights in yellow color for example:
Receiver Determination(s):
| SRD_009 | PurchaseOrderRequest_Out | * | *
Analysis
Required sender communication component: | SRD_009 A receiver determination was found for the connection All receivers are contained in the receiver determination found
Results
The reused receiver determination is already assigned to the configuration scenario
Notes
Check the conditions for all receivers of the receiver determination. The default result value for the generated condition is: TRUE
I am message for test and I can see the message into PI the estatus is Recorded and flag is color Green.
but no show an error or problems only stay in Recorded Status , othe observation into the SXMB_MONI the fiel Receiver component and Receiver Interface are empty,
what you suggets ?
best regards.

PO replication from SRM to SRM -SUS

Hello Guys
How to replicate a PO from SRM to SRM SUS Client in case of PO created in SRM SUS scenario.
Any configuration and back ground job needs to be scheduled. Also for the corresponding documents from SRM to SUS and Vice versa.
Second, why middle ware PI is used for replication of vendors from SRM to SRM SUS as they both deploy on same system with different client.
Please reply guys
Thanks.
Edited by: santhosh.s on Feb 13, 2012 8:53 AM
Edited by: santhosh.s on Feb 13, 2012 8:53 AM
Edited by: santhosh.s on Feb 13, 2012 8:57 AM

Hi Santosh,
As you are using extended classic scenario for transferring PO from SRM EBP to SRM SUS.
You can schedule a report RSPPFPROCESS for every minute with following varient
Application - BBP_PD
Action Profile - BBP_PD_PO
Action Defination - STANDARD_PO
Promotion Status - (0) Not Processed
and also select Processing withhout dialog checkbox.
Regards,
Pawan Keshwani

Could not able to see POs in URL (SRM-SUS-MM) Scenario

Hi All,
We have created a PO in MM(R/3) and was transferred to SUS through XI.
We could able to see the PO in TCode BBP_PD in SRM-SUS. But for some reason we are not able to see the PO from the URL.
We have Purchaser (SRM_ADMIN) and Vendor (ARAMI-02) assigned the roles SAP_EC_SUS_ADMIN_PURCHASER and SAP_EC_SUS_ORDER_PROCESSOR respectively.
My Org Structure is as follows:
We have an Organization defined as company. Function CCode deifined.
We have an POrg defined as POrg Function POrg Defined.
We have an Pgrp defined as PGrp Function PGrg Defined.
We have defined vendor Org. haven't assigned anything in function tab.
But defined some attributes needed for Vend Org.
The PO is coming into transaction BBP_PD(SRM SUS) through XI from MM R/3 but is not available in URL either for Purchaser or for Vendor.
Please tell me what needs to be done to resolve the above issue.
Thanks in advance...
Regards,
Ravi..

Hi
Yes sure.. Ask BASIS Team to help out and add the required role / profile to the required User, who is unable to see the POs.
Please go through the following SAP OSS Notes as well ->
Note 852516 Buyer administrator is not able to view supplier documents
Note 854910 Buyer administrator is able to change status for invoices
Note 818385 Purchaser Admin has wrong authority to change invoices
Note 1024327 Short dump when trying to open a vendor message
Note 1032800 Error opening a vendor message in SUS
Note 1029356 Error opening a vendor message in EBP&SUS in one client
Note 884905 No SUS alerts displayed in BP SuCo 2.0
Note 743084 Missing status 'rejected' for Order in Menu
Do let me know.
Regards
- Atul

SRM-SUS for Service Entry Sheets - Classic Scenario

Hi SRM Gurus,
Our client wants to use SRM-SUS for the Service Entry Sheets (to being with and then later expand more in other SRM areas). The lead system will be R/3 system.
We will be going with ECC 6.0 and SRM 5.0.
Service Order will be created in R/3 and replicated into SRM (SAP have said this is new functionality in SRM 2007 and SAP will provide us with this functionality in SRM 5.0 as well)
SAP are also recommending using MDM for hosting the catalogs for service entry sheets to enable vendors to selete their items during the confirmation / filling the service entry sheets. - they say this is mandatory
SAP are also asking for XI for the data to be transferred from R/3 to SRM (and may be vice versa) - they say this is mandatory.
Few questions:
1) What kind of hardware size are we talking about to have SRM-SUS, MDM, XI and Portal (PI)
2) Are MDM and XI mandatory as said by SAP and if yes, in what scenarios. What is they way around
3) How good is the functionality provided by SRM-SUS for Services? Is it as good as in R/3 (or even better)? We will be having complex Services in our scnearios.
4) What can be a typical time to install SRM-SUS, MDM, XI and Portal in the Dev environment to get moving onto the project?
An early response shall be highly appreciated.
Thanks in advance
Regards
Rahul

few answers to your questions
1) what is the release of SRM you want to work with?
2) services in SUS is not available as standard , and will be provided by SAP as consulting up on request.
3) for hardware requirements , please refer to the master guide for the srm release you will be working on -->
and also you can refer to the software component matrix in master guide --> to see if any component is mandatory..
4) XI and MDM as far as i know is mandatory for SRM 6.0 and above , But in SRM 5.0 , XI is compulsory.
5) so xi is mandatory in anyway in SUS as different systems are involved and therefore is required for routing the documents correctly.
6) time for installation again depends on your supplier base , and your level of expertise.
7) it is not always recommended to compare between two different systems , R/3 and SUS are different and so functionality will not be the same
8) but as far as i know R/3 is stronger functioanlly..

Backup requirements for SRM/SUS

Hi Gurus,
is there any special reuirement for backing up the SRM and SUS system.
Regards!

Normally when upgrade patches are applied to systems basis advise to backup the working clients
but have not heard about special back up for SRM-SUS.
BR
Dinesh

Differences b/w ICH & SRM SUS

Hi SAP experts,
I would like to know the differences between SRM SUS & SCM ICH. Both are supplier collaboration systems bundled in two different solutions.
To my knowledge the only difference is, the inventory levels are seen in case of SCM ICH , but whereas in SRM SUS its not possible.
Experts please throw some light on this.
Thanking you in anticipation.
Vasudevan

Hi
Please go through this ->
SAP Inventory Collaboration Hub (ICH)

ICH is the supplier collaboration element covering tigher collaboration processes,
like forecasting, kanban, order management; it supports the production process,
but for e.g. does not cover invoicing. it is different than SUS, which focus
on small suppliers without any systems inhouse and only offers order managmt.
It depends on the environment, if you need SUS or / and ICH.
In longterm the SUS functionalities are planned to be integrated into ICH forming
a new product called Supply Network Collaboration offering all collaborative
processes. - ICH is part of the SCM Suite as well found under Collaboratio Suite
- Installed on a separate Box; from SCM perspective it also makes sense to
separate APO and ICH; nevertheless SCM is a one client environment, like BW
- Documents are available via SCM and Solution Manager; search in the
Marketplace
Please find some info "ICH" in the SAP Service Marketplace. ICH is Inventory Collaboration Hub, Supplier Managed Inventory.
http://service.sap.com
SRM SUS
SRM SUS can and should be used for Indirect material procurement. mySAP SRM provides a fantastic solution for transferring Purchase Orders from EBP to SUS for indirect materials and service items.
If you wish to integrate MM-SUS (which is primarily intended for direct materials) then you will have to use Classic Scenario. But then you will lose all Sourcing functionality in SRM.
ICH/SNC is intended for direct materials only. It does not support free text items or items bought for cost centers.
The ICH Purchase Order process is also intended for small suppliers - this is not a difference between ICH and SUS.
But ICH is only intended for purchase orders with a material.
Therefore the scenario is a deciding factor.
For indirect materials you are probably doing some purchase orders without materials, and these purchase orders can not be handled within ICH.
If you have only purchase orders with material items ICH can definitely be considered - and it is the tool for the future. A drawback of ICH is the master data complexity and this should be considered/evaluated before choosing ICH.
Go throrugh these link as well ->
http://help.sap.com/saphelp_snc2007/index.htm
Re: SRM 6.0: ECS and SUS
http://help.sap.com/saphelp_srm50/helpdata/en/60/4d424089ff2571e10000000a155106/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/c3/4cdd5f39ad40eba8d0b78d987f2f4e/frameset.htm
OSS Note - 936946 - SAP ICH Implementation note
http://help.sap.com/saphelp_srm50/helpdata/en/18/93e3caf97b457ca2a5c5ad72f971ce/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/e4/f5d5682cdd4108a01d42f3149253b5/frameset.htm
Re: ICH or Supplier Self Service ??
Hope this will help. Do let me know.
Regards
- Atul

How can I connect multiple clients to a single client ?

I am currently developing an instant messaging program.I created a server and connected multiple clients to it by using thread logic.However I do not know how to connect multiple client to a single client.
What shall I do for that?Does anybody know a good tutorial or sample program?Or shall anybody explain me what I shall do for building the Instant Messaging part of my chat program?
Thank u in advance.

You may use UDP multicast socket. But since you are using the UDP protocol you might risk losing the data that you send since UDP does not guarantee the safe transfer of data.
Alternately, you might create a server that allows multiple client to connect to it whose connection Socket objects are then stored in a Vector <Socket> object. The server then sends back data to the connected client about the other clients connected to it. Now when the client wants to send data (like an IM) to another connected client, it has to send a request to the server specifying the client login name and the server in turn streams that particular client's Address and Port to the requesting client. The requesting client then initiates the connection with the other client and then starts a conversation. One more thing, when the client communicates it needs to send information to the server like the name by which it likes to be referenced. In this scenario the server acts like a central repository for clients to query the existence of other clients in the chat room. Each client here runs a thread that listens to incoming connections and when a connection is established, may be opens a IM window or something.
The third option is to make the server to relay the information from one client to another. Like say, I'm connected to whoopy server and i want to send "Hello" to jackson, then i send the message (ie, Hello) along with the name of the client to which i wish to send it to (ie, jackson). The server then performs a lookup in its Vector <Socket> object and then initiates a connection with jackson and sends the information. However, this method is pretty costly in that you will be wasting a lot of processing behind the server.
--Subhankar
P.s. If you stumble upon any other brilliant ideas let me know.

Help!PO inbound ERROR in SRM SUS when create a PO from R/3

Hi All:
 I met a problem in SRM SUS,when create a po in R/3 and send this PO to SRM SUS,but there was a error in XI monitor t-code:SXMB_MONI, i have created the buyer via t-code: BBP_SUS_BP_ADM,and sent the vender from R/3 that is ok.
 check this xml.plesse take a look at error information.
 <FAULT_TEXT>An error occured within an XI interface: Exception occurredA:BBP_BUPA:263 -Ordering party has to be a company Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
 <FAULT_URL />
 I am used SRM server 5.5, package level is SAPKIBKT06.
 Plesse help....
Thanks
Best Regards

At least i did it.
The solution was in the transaction BUPA_TAXNUMTYPE. Here you can define wether you want to check the duplicated TAXNUMBERS or not. After applying some patches we think the value of the entry corresponding to our country, changed. So we put the value to OFF and everything worked fine again.
Thank you.

SRM-SUS Single client

Similar Messages

Maybe you are looking for